drm/i915: remove loop in Ironlake interrupt handler
On Ironlake, there is an interrupt master control bit. With the bit
disabled before clearing IIR, we do not need to handle extra interrupt
in a loop. This patch removes the loop in Ironlake interrupt handler.
It fixed irq lost issue on some Ironlake platforms.
Cc: Stable Team <stable@kernel.org>
Signed-off-by: Zou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 7cd8110..89a071a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -274,7 +274,6 @@
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir;
- u32 new_de_iir, new_gt_iir, new_pch_iir;
struct drm_i915_master_private *master_priv;
/* disable master interrupt before clearing iir */
@@ -286,51 +285,42 @@
gt_iir = I915_READ(GTIIR);
pch_iir = I915_READ(SDEIIR);
- for (;;) {
- if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
- break;
+ if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+ goto done;
- ret = IRQ_HANDLED;
+ ret = IRQ_HANDLED;
- /* should clear PCH hotplug event before clear CPU irq */
- I915_WRITE(SDEIIR, pch_iir);
- new_pch_iir = I915_READ(SDEIIR);
-
- I915_WRITE(DEIIR, de_iir);
- new_de_iir = I915_READ(DEIIR);
- I915_WRITE(GTIIR, gt_iir);
- new_gt_iir = I915_READ(GTIIR);
-
- if (dev->primary->master) {
- master_priv = dev->primary->master->driver_priv;
- if (master_priv->sarea_priv)
- master_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- }
-
- if (gt_iir & GT_USER_INTERRUPT) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
- trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
- dev_priv->hangcheck_count = 0;
- mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
- }
-
- if (de_iir & DE_GSE)
- ironlake_opregion_gse_intr(dev);
-
- /* check event from PCH */
- if ((de_iir & DE_PCH_EVENT) &&
- (pch_iir & SDE_HOTPLUG_MASK)) {
- queue_work(dev_priv->wq, &dev_priv->hotplug_work);
- }
-
- de_iir = new_de_iir;
- gt_iir = new_gt_iir;
- pch_iir = new_pch_iir;
+ if (dev->primary->master) {
+ master_priv = dev->primary->master->driver_priv;
+ if (master_priv->sarea_priv)
+ master_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
}
+ if (gt_iir & GT_USER_INTERRUPT) {
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ }
+
+ if (de_iir & DE_GSE)
+ ironlake_opregion_gse_intr(dev);
+
+ /* check event from PCH */
+ if ((de_iir & DE_PCH_EVENT) &&
+ (pch_iir & SDE_HOTPLUG_MASK)) {
+ queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+ }
+
+ /* should clear PCH hotplug event before clear CPU irq */
+ I915_WRITE(SDEIIR, pch_iir);
+ I915_WRITE(GTIIR, gt_iir);
+ I915_WRITE(DEIIR, de_iir);
+
+done:
I915_WRITE(DEIER, de_ier);
(void)I915_READ(DEIER);