i2c: mv64xxx: Add support for the Allwinner A31 I2C driver
The Allwinner A31 I2C controller is almost identical to the one used in the
other Allwinner SoCs, except for the fact that it needs to clear the interrupt
by setting the INT_FLAGS bit in the control register, instead of clearing it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 1bb69b6..203a548 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -150,6 +150,7 @@
/* 5us delay in order to avoid repeated start timing violation */
bool errata_delay;
struct reset_control *rstc;
+ bool irq_clear_inverted;
};
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -568,6 +569,11 @@
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
mv64xxx_i2c_fsm(drv_data, status);
mv64xxx_i2c_do_action(drv_data);
+
+ if (drv_data->irq_clear_inverted)
+ writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
+ drv_data->reg_base + drv_data->reg_offsets.control);
+
rc = IRQ_HANDLED;
}
spin_unlock_irqrestore(&drv_data->lock, flags);
@@ -687,6 +693,7 @@
*/
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+ { .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
@@ -795,6 +802,10 @@
drv_data->offload_enabled = false;
drv_data->errata_delay = true;
}
+
+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+ drv_data->irq_clear_inverted = true;
+
out:
return rc;
#endif