iwlwifi: unify init driver flow
This patch does the following:
1 - moving init_drv from handler to regular function call
2 - move the init driver flow from iwl4965 to iwlcore, thus unify it to all
iwl family as a single flow
3 - move some general purpose functions from iwl4965 to iwlcore
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 2b21edb..93f4cdb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -55,44 +55,6 @@
static void iwl4965_hw_card_show_info(struct iwl_priv *priv);
-#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
- [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
- IWL_RATE_SISO_##s##M_PLCP, \
- IWL_RATE_MIMO2_##s##M_PLCP,\
- IWL_RATE_MIMO3_##s##M_PLCP,\
- IWL_RATE_##r##M_IEEE, \
- IWL_RATE_##ip##M_INDEX, \
- IWL_RATE_##in##M_INDEX, \
- IWL_RATE_##rp##M_INDEX, \
- IWL_RATE_##rn##M_INDEX, \
- IWL_RATE_##pp##M_INDEX, \
- IWL_RATE_##np##M_INDEX }
-
-/*
- * Parameter order:
- * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to IWL_RATE_INVALID
- *
- */
-const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = {
- IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
- IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
- IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
- IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
- IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
- IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
- IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
- IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
- IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
- IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
- IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
- IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
- IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
- /* FIXME:RS: ^^ should be INV (legacy) */
-};
-
#ifdef CONFIG_IWL4965_HT
static const u16 default_tid_to_tx_fifo[] = {
@@ -262,108 +224,12 @@
return 0;
}
-static int iwl4965_init_drv(struct iwl_priv *priv)
-{
- int ret;
- int i;
-
- priv->retry_rate = 1;
- priv->ibss_beacon = NULL;
-
- spin_lock_init(&priv->lock);
- spin_lock_init(&priv->power_data.lock);
- spin_lock_init(&priv->sta_lock);
- spin_lock_init(&priv->hcmd_lock);
- spin_lock_init(&priv->lq_mngr.lock);
-
- for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
- INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
-
- INIT_LIST_HEAD(&priv->free_frames);
-
- mutex_init(&priv->mutex);
-
- /* Clear the driver's (not device's) station table */
- iwlcore_clear_stations_table(priv);
-
- priv->data_retry_limit = -1;
- priv->ieee_channels = NULL;
- priv->ieee_rates = NULL;
- priv->band = IEEE80211_BAND_2GHZ;
-
- priv->iw_mode = IEEE80211_IF_TYPE_STA;
-
- priv->use_ant_b_for_management_frame = 1; /* start with ant B */
- priv->ps_mode = IWL_MIMO_PS_NONE;
-
- /* Choose which receivers/antennas to use */
- iwl4965_set_rxon_chain(priv);
-
- iwlcore_reset_qos(priv);
-
- priv->qos_data.qos_active = 0;
- priv->qos_data.qos_cap.val = 0;
-
- iwlcore_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
-
- priv->rates_mask = IWL_RATES_MASK;
- /* If power management is turned on, default to AC mode */
- priv->power_mode = IWL_POWER_AC;
- priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
-
- ret = iwl_init_channel_map(priv);
- if (ret) {
- IWL_ERROR("initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- ret = iwl4965_init_geos(priv);
- if (ret) {
- IWL_ERROR("initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
-
- ret = ieee80211_register_hw(priv->hw);
- if (ret) {
- IWL_ERROR("Failed to register network device (error %d)\n",
- ret);
- goto err_free_geos;
- }
-
- priv->hw->conf.beacon_int = 100;
- priv->mac80211_registered = 1;
-
- return 0;
-
-err_free_geos:
- iwl4965_free_geos(priv);
-err_free_channel_map:
- iwl_free_channel_map(priv);
-err:
- return ret;
-}
-
static int is_fat_channel(__le32 rxon_flags)
{
return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
(rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
}
-#ifdef CONFIG_IWL4965_HT
-static u8 is_single_rx_stream(struct iwl_priv *priv)
-{
- return !priv->current_ht_config.is_ht ||
- ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
- (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
- priv->ps_mode == IWL_MIMO_PS_STATIC;
-}
-#else
-static inline u8 is_single_rx_stream(struct iwl_priv *priv)
-{
- return 1;
-}
-#endif /*CONFIG_IWL4965_HT */
-
int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags)
{
int idx = 0;
@@ -422,41 +288,6 @@
&priv->bands[IEEE80211_BAND_2GHZ].bitrates[rate_index];
}
-/*
- * Determine how many receiver/antenna chains to use.
- * More provides better reception via diversity. Fewer saves power.
- * MIMO (dual stream) requires at least 2, but works better with 3.
- * This does not determine *which* chains to use, just how many.
- */
-static int iwl4965_get_rx_chain_counter(struct iwl_priv *priv,
- u8 *idle_state, u8 *rx_state)
-{
- u8 is_single = is_single_rx_stream(priv);
- u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
-
- /* # of Rx chains to use when expecting MIMO. */
- if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
- *rx_state = 2;
- else
- *rx_state = 3;
-
- /* # Rx chains when idling and maybe trying to save power */
- switch (priv->ps_mode) {
- case IWL_MIMO_PS_STATIC:
- case IWL_MIMO_PS_DYNAMIC:
- *idle_state = (is_cam) ? 2 : 1;
- break;
- case IWL_MIMO_PS_NONE:
- *idle_state = (is_cam) ? *rx_state : 1;
- break;
- default:
- *idle_state = 1;
- break;
- }
-
- return 0;
-}
-
int iwl4965_hw_rxq_stop(struct iwl_priv *priv)
{
int rc;
@@ -2527,44 +2358,6 @@
}
/**
- * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
- *
- * Selects how many and which Rx receivers/antennas/chains to use.
- * This should not be used for scan command ... it puts data in wrong place.
- */
-void iwl4965_set_rxon_chain(struct iwl_priv *priv)
-{
- u8 is_single = is_single_rx_stream(priv);
- u8 idle_state, rx_state;
-
- priv->staging_rxon.rx_chain = 0;
- rx_state = idle_state = 3;
-
- /* Tell uCode which antennas are actually connected.
- * Before first association, we assume all antennas are connected.
- * Just after first association, iwl_chain_noise_calibration()
- * checks which antennas actually *are* connected. */
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(priv->hw_params.valid_rx_ant <<
- RXON_RX_CHAIN_VALID_POS);
-
- /* How many receivers should we use? */
- iwl4965_get_rx_chain_counter(priv, &idle_state, &rx_state);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
- if (!is_single && (rx_state >= 2) &&
- !test_bit(STATUS_POWER_PMI, &priv->status))
- priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
- else
- priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
-
- IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
-}
-
-/**
* sign_extend - Sign extend a value using specified bit as sign-bit
*
* Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
@@ -3127,41 +2920,6 @@
return (max_rssi - agc - IWL_RSSI_OFFSET);
}
-#ifdef CONFIG_IWL4965_HT
-
-void iwl4965_init_ht_hw_capab(const struct iwl_priv *priv,
- struct ieee80211_ht_info *ht_info,
- enum ieee80211_band band)
-{
- ht_info->cap = 0;
- memset(ht_info->supp_mcs_set, 0, 16);
-
- ht_info->ht_supported = 1;
-
- if (priv->hw_params.fat_channel & BIT(band)) {
- ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
- ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
- ht_info->supp_mcs_set[4] = 0x01;
- }
- ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
- ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
- ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
- (IWL_MIMO_PS_NONE << 2));
-
- if (priv->cfg->mod_params->amsdu_size_8K)
- ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
-
- ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
- ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
-
- ht_info->supp_mcs_set[0] = 0xFF;
- if (priv->hw_params.tx_chains_num >= 2)
- ht_info->supp_mcs_set[1] = 0xFF;
- if (priv->hw_params.tx_chains_num >= 3)
- ht_info->supp_mcs_set[2] = 0xFF;
-}
-#endif /* CONFIG_IWL4965_HT */
-
static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
{
unsigned long flags;
@@ -4039,7 +3797,7 @@
rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
"rxon flags 0x%X operation mode :0x%X "
@@ -4356,7 +4114,6 @@
};
static struct iwl_lib_ops iwl4965_lib = {
- .init_drv = iwl4965_init_drv,
.set_hw_params = iwl4965_hw_set_hw_params,
.alloc_shared_mem = iwl4965_alloc_shared_mem,
.free_shared_mem = iwl4965_free_shared_mem,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h
index e357263..3b73064 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.h
@@ -748,7 +748,6 @@
u16 byte_cnt);
extern void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr,
int is_ap);
-extern void iwl4965_set_rxon_chain(struct iwl_priv *priv);
extern int iwl4965_alive_notify(struct iwl_priv *priv);
extern void iwl4965_update_rate_scaling(struct iwl_priv *priv, u8 mode);
extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 68de1a4..ca32fb3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -51,6 +51,45 @@
EXPORT_SYMBOL(iwl_debug_level);
#endif
+#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
+ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
+ IWL_RATE_SISO_##s##M_PLCP, \
+ IWL_RATE_MIMO2_##s##M_PLCP,\
+ IWL_RATE_MIMO3_##s##M_PLCP,\
+ IWL_RATE_##r##M_IEEE, \
+ IWL_RATE_##ip##M_INDEX, \
+ IWL_RATE_##in##M_INDEX, \
+ IWL_RATE_##rp##M_INDEX, \
+ IWL_RATE_##rn##M_INDEX, \
+ IWL_RATE_##pp##M_INDEX, \
+ IWL_RATE_##np##M_INDEX }
+
+/*
+ * Parameter order:
+ * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to IWL_RATE_INVALID
+ *
+ */
+const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = {
+ IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
+ IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
+ IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
+ IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
+ IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
+ IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
+ IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
+ IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
+ IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
+ IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
+ IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
+ IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+ IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
+ /* FIXME:RS: ^^ should be INV (legacy) */
+};
+EXPORT_SYMBOL(iwl4965_rates);
+
/* This function both allocates and initializes hw and priv. */
struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
struct ieee80211_ops *hw_ops)
@@ -100,7 +139,7 @@
}
EXPORT_SYMBOL(iwlcore_clear_stations_table);
-void iwlcore_reset_qos(struct iwl_priv *priv)
+void iwl_reset_qos(struct iwl_priv *priv)
{
u16 cw_min = 15;
u16 cw_max = 1023;
@@ -186,7 +225,289 @@
spin_unlock_irqrestore(&priv->lock, flags);
}
-EXPORT_SYMBOL(iwlcore_reset_qos);
+EXPORT_SYMBOL(iwl_reset_qos);
+
+#ifdef CONFIG_IWL4965_HT
+static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
+ struct ieee80211_ht_info *ht_info,
+ enum ieee80211_band band)
+{
+ ht_info->cap = 0;
+ memset(ht_info->supp_mcs_set, 0, 16);
+
+ ht_info->ht_supported = 1;
+
+ if (priv->hw_params.fat_channel & BIT(band)) {
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
+ ht_info->supp_mcs_set[4] = 0x01;
+ }
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
+ ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
+ (IWL_MIMO_PS_NONE << 2));
+
+ if (priv->cfg->mod_params->amsdu_size_8K)
+ ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
+
+ ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
+ ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
+
+ ht_info->supp_mcs_set[0] = 0xFF;
+ if (priv->hw_params.tx_chains_num >= 2)
+ ht_info->supp_mcs_set[1] = 0xFF;
+ if (priv->hw_params.tx_chains_num >= 3)
+ ht_info->supp_mcs_set[2] = 0xFF;
+}
+#endif /* CONFIG_IWL4965_HT */
+
+static void iwlcore_init_hw_rates(struct iwl_priv *priv,
+ struct ieee80211_rate *rates)
+{
+ int i;
+
+ for (i = 0; i < IWL_RATE_COUNT; i++) {
+ rates[i].bitrate = iwl4965_rates[i].ieee * 5;
+ rates[i].hw_value = i; /* Rate scaling will work on indexes */
+ rates[i].hw_value_short = i;
+ rates[i].flags = 0;
+ if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
+ /*
+ * If CCK != 1M then set short preamble rate flag.
+ */
+ rates[i].flags |=
+ (iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ?
+ 0 : IEEE80211_RATE_SHORT_PREAMBLE;
+ }
+ }
+}
+
+/**
+ * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
+ */
+static int iwlcore_init_geos(struct iwl_priv *priv)
+{
+ struct iwl_channel_info *ch;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *channels;
+ struct ieee80211_channel *geo_ch;
+ struct ieee80211_rate *rates;
+ int i = 0;
+
+ if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
+ priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
+ IWL_DEBUG_INFO("Geography modes already initialized.\n");
+ set_bit(STATUS_GEO_CONFIGURED, &priv->status);
+ return 0;
+ }
+
+ channels = kzalloc(sizeof(struct ieee80211_channel) *
+ priv->channel_count, GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
+ GFP_KERNEL);
+ if (!rates) {
+ kfree(channels);
+ return -ENOMEM;
+ }
+
+ /* 5.2GHz channels start after the 2.4GHz channels */
+ sband = &priv->bands[IEEE80211_BAND_5GHZ];
+ sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
+ /* just OFDM */
+ sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
+ sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
+
+ iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ);
+
+ sband = &priv->bands[IEEE80211_BAND_2GHZ];
+ sband->channels = channels;
+ /* OFDM & CCK */
+ sband->bitrates = rates;
+ sband->n_bitrates = IWL_RATE_COUNT;
+
+ iwlcore_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ);
+
+ priv->ieee_channels = channels;
+ priv->ieee_rates = rates;
+
+ iwlcore_init_hw_rates(priv, rates);
+
+ for (i = 0; i < priv->channel_count; i++) {
+ ch = &priv->channel_info[i];
+
+ /* FIXME: might be removed if scan is OK */
+ if (!is_channel_valid(ch))
+ continue;
+
+ if (is_channel_a_band(ch))
+ sband = &priv->bands[IEEE80211_BAND_5GHZ];
+ else
+ sband = &priv->bands[IEEE80211_BAND_2GHZ];
+
+ geo_ch = &sband->channels[sband->n_channels++];
+
+ geo_ch->center_freq =
+ ieee80211_channel_to_frequency(ch->channel);
+ geo_ch->max_power = ch->max_power_avg;
+ geo_ch->max_antenna_gain = 0xff;
+ geo_ch->hw_value = ch->channel;
+
+ if (is_channel_valid(ch)) {
+ if (!(ch->flags & EEPROM_CHANNEL_IBSS))
+ geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
+
+ if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
+ geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ if (ch->flags & EEPROM_CHANNEL_RADAR)
+ geo_ch->flags |= IEEE80211_CHAN_RADAR;
+
+ if (ch->max_power_avg > priv->max_channel_txpower_limit)
+ priv->max_channel_txpower_limit =
+ ch->max_power_avg;
+ } else {
+ geo_ch->flags |= IEEE80211_CHAN_DISABLED;
+ }
+
+ /* Save flags for reg domain usage */
+ geo_ch->orig_flags = geo_ch->flags;
+
+ IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
+ ch->channel, geo_ch->center_freq,
+ is_channel_a_band(ch) ? "5.2" : "2.4",
+ geo_ch->flags & IEEE80211_CHAN_DISABLED ?
+ "restricted" : "valid",
+ geo_ch->flags);
+ }
+
+ if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
+ priv->cfg->sku & IWL_SKU_A) {
+ printk(KERN_INFO DRV_NAME
+ ": Incorrectly detected BG card as ABG. Please send "
+ "your PCI ID 0x%04X:0x%04X to maintainer.\n",
+ priv->pci_dev->device, priv->pci_dev->subsystem_device);
+ priv->cfg->sku &= ~IWL_SKU_A;
+ }
+
+ printk(KERN_INFO DRV_NAME
+ ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
+ priv->bands[IEEE80211_BAND_2GHZ].n_channels,
+ priv->bands[IEEE80211_BAND_5GHZ].n_channels);
+
+ if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &priv->bands[IEEE80211_BAND_2GHZ];
+ if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &priv->bands[IEEE80211_BAND_5GHZ];
+
+ set_bit(STATUS_GEO_CONFIGURED, &priv->status);
+
+ return 0;
+}
+
+/*
+ * iwlcore_free_geos - undo allocations in iwlcore_init_geos
+ */
+void iwlcore_free_geos(struct iwl_priv *priv)
+{
+ kfree(priv->ieee_channels);
+ kfree(priv->ieee_rates);
+ clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
+}
+EXPORT_SYMBOL(iwlcore_free_geos);
+
+#ifdef CONFIG_IWL4965_HT
+static u8 is_single_rx_stream(struct iwl_priv *priv)
+{
+ return !priv->current_ht_config.is_ht ||
+ ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
+ (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
+ priv->ps_mode == IWL_MIMO_PS_STATIC;
+}
+#else
+static inline u8 is_single_rx_stream(struct iwl_priv *priv)
+{
+ return 1;
+}
+#endif /*CONFIG_IWL4965_HT */
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ * More provides better reception via diversity. Fewer saves power.
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
+ u8 *idle_state, u8 *rx_state)
+{
+ u8 is_single = is_single_rx_stream(priv);
+ u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+
+ /* # of Rx chains to use when expecting MIMO. */
+ if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
+ *rx_state = 2;
+ else
+ *rx_state = 3;
+
+ /* # Rx chains when idling and maybe trying to save power */
+ switch (priv->ps_mode) {
+ case IWL_MIMO_PS_STATIC:
+ case IWL_MIMO_PS_DYNAMIC:
+ *idle_state = (is_cam) ? 2 : 1;
+ break;
+ case IWL_MIMO_PS_NONE:
+ *idle_state = (is_cam) ? *rx_state : 1;
+ break;
+ default:
+ *idle_state = 1;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void iwl_set_rxon_chain(struct iwl_priv *priv)
+{
+ u8 is_single = is_single_rx_stream(priv);
+ u8 idle_state, rx_state;
+
+ priv->staging_rxon.rx_chain = 0;
+ rx_state = idle_state = 3;
+
+ /* Tell uCode which antennas are actually connected.
+ * Before first association, we assume all antennas are connected.
+ * Just after first association, iwl_chain_noise_calibration()
+ * checks which antennas actually *are* connected. */
+ priv->staging_rxon.rx_chain |=
+ cpu_to_le16(priv->hw_params.valid_rx_ant <<
+ RXON_RX_CHAIN_VALID_POS);
+
+ /* How many receivers should we use? */
+ iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
+ priv->staging_rxon.rx_chain |=
+ cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
+ priv->staging_rxon.rx_chain |=
+ cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
+
+ if (!is_single && (rx_state >= 2) &&
+ !test_bit(STATUS_POWER_PMI, &priv->status))
+ priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+ else
+ priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+ IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+}
+EXPORT_SYMBOL(iwl_set_rxon_chain);
/**
* iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
@@ -198,7 +519,7 @@
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
* in the staging RXON flag structure based on the phymode
*/
-int iwlcore_set_rxon_channel(struct iwl_priv *priv,
+int iwl_set_rxon_channel(struct iwl_priv *priv,
enum ieee80211_band band,
u16 channel)
{
@@ -224,7 +545,7 @@
return 0;
}
-EXPORT_SYMBOL(iwlcore_set_rxon_channel);
+EXPORT_SYMBOL(iwl_set_rxon_channel);
static void iwlcore_init_hw(struct iwl_priv *priv)
{
@@ -251,11 +572,92 @@
#endif /* CONFIG_IWL4965_HT */
}
+static int iwlcore_init_drv(struct iwl_priv *priv)
+{
+ int ret;
+ int i;
+
+ priv->retry_rate = 1;
+ priv->ibss_beacon = NULL;
+
+ spin_lock_init(&priv->lock);
+ spin_lock_init(&priv->power_data.lock);
+ spin_lock_init(&priv->sta_lock);
+ spin_lock_init(&priv->hcmd_lock);
+ spin_lock_init(&priv->lq_mngr.lock);
+
+ for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
+ INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
+
+ INIT_LIST_HEAD(&priv->free_frames);
+
+ mutex_init(&priv->mutex);
+
+ /* Clear the driver's (not device's) station table */
+ iwlcore_clear_stations_table(priv);
+
+ priv->data_retry_limit = -1;
+ priv->ieee_channels = NULL;
+ priv->ieee_rates = NULL;
+ priv->band = IEEE80211_BAND_2GHZ;
+
+ priv->iw_mode = IEEE80211_IF_TYPE_STA;
+
+ priv->use_ant_b_for_management_frame = 1; /* start with ant B */
+ priv->ps_mode = IWL_MIMO_PS_NONE;
+
+ /* Choose which receivers/antennas to use */
+ iwl_set_rxon_chain(priv);
+
+ iwl_reset_qos(priv);
+
+ priv->qos_data.qos_active = 0;
+ priv->qos_data.qos_cap.val = 0;
+
+ iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
+
+ priv->rates_mask = IWL_RATES_MASK;
+ /* If power management is turned on, default to AC mode */
+ priv->power_mode = IWL_POWER_AC;
+ priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
+
+ ret = iwl_init_channel_map(priv);
+ if (ret) {
+ IWL_ERROR("initializing regulatory failed: %d\n", ret);
+ goto err;
+ }
+
+ ret = iwlcore_init_geos(priv);
+ if (ret) {
+ IWL_ERROR("initializing geos failed: %d\n", ret);
+ goto err_free_channel_map;
+ }
+
+ ret = ieee80211_register_hw(priv->hw);
+ if (ret) {
+ IWL_ERROR("Failed to register network device (error %d)\n",
+ ret);
+ goto err_free_geos;
+ }
+
+ priv->hw->conf.beacon_int = 100;
+ priv->mac80211_registered = 1;
+
+ return 0;
+
+err_free_geos:
+ iwlcore_free_geos(priv);
+err_free_channel_map:
+ iwl_free_channel_map(priv);
+err:
+ return ret;
+}
+
int iwl_setup(struct iwl_priv *priv)
{
int ret = 0;
iwlcore_init_hw(priv);
- ret = priv->cfg->ops->lib->init_drv(priv);
+ ret = iwlcore_init_drv(priv);
return ret;
}
EXPORT_SYMBOL(iwl_setup);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index e94aea3c..e18940d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -97,8 +97,6 @@
};
struct iwl_lib_ops {
- /* iwlwifi driver (priv) init */
- int (*init_drv)(struct iwl_priv *priv);
/* set hw dependant perameters */
int (*set_hw_params)(struct iwl_priv *priv);
/* ucode shared memory */
@@ -164,11 +162,12 @@
void iwl_hw_detect(struct iwl_priv *priv);
void iwlcore_clear_stations_table(struct iwl_priv *priv);
-void iwlcore_reset_qos(struct iwl_priv *priv);
-int iwlcore_set_rxon_channel(struct iwl_priv *priv,
+void iwl_reset_qos(struct iwl_priv *priv);
+void iwl_set_rxon_chain(struct iwl_priv *priv);
+int iwl_set_rxon_channel(struct iwl_priv *priv,
enum ieee80211_band band,
u16 channel);
-
+void iwlcore_free_geos(struct iwl_priv *priv);
int iwl_setup(struct iwl_priv *priv);
/*****************************************************
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 89b0950..e245273 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -882,7 +882,7 @@
void iwl4965_update_chain_flags(struct iwl_priv *priv)
{
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
iwl4965_commit_rxon(priv);
}
@@ -1735,7 +1735,7 @@
memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
}
static int iwl4965_set_mode(struct iwl_priv *priv, int mode)
@@ -4496,163 +4496,6 @@
return added;
}
-static void iwl4965_init_hw_rates(struct iwl_priv *priv,
- struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < IWL_RATE_COUNT; i++) {
- rates[i].bitrate = iwl4965_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on indexes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |=
- (iwl4965_rates[i].plcp == IWL_RATE_1M_PLCP) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-
-/**
- * iwl4965_init_geos - Initialize mac80211's geo/channel info based from eeprom
- */
-int iwl4965_init_geos(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch;
- struct ieee80211_supported_band *sband;
- struct ieee80211_channel *channels;
- struct ieee80211_channel *geo_ch;
- struct ieee80211_rate *rates;
- int i = 0;
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
- priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
- IWL_DEBUG_INFO("Geography modes already initialized.\n");
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
- return 0;
- }
-
- channels = kzalloc(sizeof(struct ieee80211_channel) *
- priv->channel_count, GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
- GFP_KERNEL);
- if (!rates) {
- kfree(channels);
- return -ENOMEM;
- }
-
- /* 5.2GHz channels start after the 2.4GHz channels */
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
- /* just OFDM */
- sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
- sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
-
- iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_5GHZ);
-
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
- sband->channels = channels;
- /* OFDM & CCK */
- sband->bitrates = rates;
- sband->n_bitrates = IWL_RATE_COUNT;
-
- iwl4965_init_ht_hw_capab(priv, &sband->ht_info, IEEE80211_BAND_2GHZ);
-
- priv->ieee_channels = channels;
- priv->ieee_rates = rates;
-
- iwl4965_init_hw_rates(priv, rates);
-
- for (i = 0; i < priv->channel_count; i++) {
- ch = &priv->channel_info[i];
-
- /* FIXME: might be removed if scan is OK */
- if (!is_channel_valid(ch))
- continue;
-
- if (is_channel_a_band(ch))
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- else
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
-
- geo_ch = &sband->channels[sband->n_channels++];
-
- geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
- geo_ch->max_power = ch->max_power_avg;
- geo_ch->max_antenna_gain = 0xff;
- geo_ch->hw_value = ch->channel;
-
- if (is_channel_valid(ch)) {
- if (!(ch->flags & EEPROM_CHANNEL_IBSS))
- geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
-
- if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
- geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
-
- if (ch->flags & EEPROM_CHANNEL_RADAR)
- geo_ch->flags |= IEEE80211_CHAN_RADAR;
-
- if (ch->max_power_avg > priv->max_channel_txpower_limit)
- priv->max_channel_txpower_limit =
- ch->max_power_avg;
- } else {
- geo_ch->flags |= IEEE80211_CHAN_DISABLED;
- }
-
- /* Save flags for reg domain usage */
- geo_ch->orig_flags = geo_ch->flags;
-
- IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
- ch->channel, geo_ch->center_freq,
- is_channel_a_band(ch) ? "5.2" : "2.4",
- geo_ch->flags & IEEE80211_CHAN_DISABLED ?
- "restricted" : "valid",
- geo_ch->flags);
- }
-
- if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
- priv->cfg->sku & IWL_SKU_A) {
- printk(KERN_INFO DRV_NAME
- ": Incorrectly detected BG card as ABG. Please send "
- "your PCI ID 0x%04X:0x%04X to maintainer.\n",
- priv->pci_dev->device, priv->pci_dev->subsystem_device);
- priv->cfg->sku &= ~IWL_SKU_A;
- }
-
- printk(KERN_INFO DRV_NAME
- ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
- priv->bands[IEEE80211_BAND_2GHZ].n_channels,
- priv->bands[IEEE80211_BAND_5GHZ].n_channels);
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &priv->bands[IEEE80211_BAND_2GHZ];
- if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &priv->bands[IEEE80211_BAND_5GHZ];
-
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
-
- return 0;
-}
-
-/*
- * iwl4965_free_geos - undo allocations in iwl4965_init_geos
- */
-void iwl4965_free_geos(struct iwl_priv *priv)
-{
- kfree(priv->ieee_channels);
- kfree(priv->ieee_rates);
- clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
-}
-
/******************************************************************************
*
* uCode download functions
@@ -5807,7 +5650,7 @@
if (priv->current_ht_config.is_ht)
iwl4965_set_rxon_ht(priv, &priv->current_ht_config);
#endif /* CONFIG_IWL4965_HT*/
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
@@ -6153,7 +5996,7 @@
priv->staging_rxon.flags = 0;
#endif /* CONFIG_IWL4965_HT */
- iwlcore_set_rxon_channel(priv, conf->channel->band,
+ iwl_set_rxon_channel(priv, conf->channel->band,
ieee80211_frequency_to_channel(conf->channel->center_freq));
iwl4965_set_flags_for_phymode(priv, conf->channel->band);
@@ -6225,7 +6068,7 @@
IWL_WARNING("REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
/* FIXME: what should be the assoc_id for AP? */
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
@@ -6437,7 +6280,7 @@
if (changes & BSS_CHANGED_HT) {
IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht);
iwl4965_ht_conf(priv, bss_conf);
- iwl4965_set_rxon_chain(priv);
+ iwl_set_rxon_chain(priv);
}
if (changes & BSS_CHANGED_ASSOC) {
@@ -6761,7 +6604,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
#endif /* CONFIG_IWL4965_HT */
- iwlcore_reset_qos(priv);
+ iwl_reset_qos(priv);
cancel_delayed_work(&priv->post_associate);
@@ -6848,7 +6691,7 @@
IWL_DEBUG_MAC80211("leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
- iwlcore_reset_qos(priv);
+ iwl_reset_qos(priv);
queue_work(priv->workqueue, &priv->post_associate.work);
@@ -7636,7 +7479,7 @@
pci_set_drvdata(pdev, NULL);
iwl_free_channel_map(priv);
- iwl4965_free_geos(priv);
+ iwlcore_free_geos(priv);
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);