Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] zcore: Fix reipl device detection
[S390] vdso: use ntp adjusted clock multiplier
[S390] cio: use exception-save stsch
[S390] add hook to reenable mss after hibernation
[S390] cio: allow enable_facility from outside init functions
[S390] dasd: fix endless loop in erp
diff --git a/MAINTAINERS b/MAINTAINERS
index a0e3c3a..a2d9254 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4791,12 +4791,11 @@
S390 ZFCP DRIVER
M: Christof Schmitt <christof.schmitt@de.ibm.com>
-M: Martin Peschke <mp3@de.ibm.com>
+M: Swen Schillig <swen@vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
-F: Documentation/s390/zfcpdump.txt
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7e27b7..d1ff940 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -146,10 +146,10 @@
"<%s> I2C Interrupted\n", __func__);
return -EINTR;
}
- if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+ if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C bus is busy\n", __func__);
- return -EIO;
+ return -ETIMEDOUT;
}
schedule();
}
@@ -444,6 +444,8 @@
result = i2c_imx_read(i2c_imx, &msgs[i]);
else
result = i2c_imx_write(i2c_imx, &msgs[i]);
+ if (result)
+ goto fail0;
}
fail0:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6bd0f19..389ac60 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -903,6 +903,11 @@
platform_set_drvdata(pdev, dev);
+ if (cpu_is_omap7xx())
+ dev->reg_shift = 1;
+ else
+ dev->reg_shift = 2;
+
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_iounmap;
@@ -926,11 +931,6 @@
dev->b_hw = 1; /* Enable hardware fixes */
}
- if (cpu_is_omap7xx())
- dev->reg_shift = 1;
- else
- dev->reg_shift = 2;
-
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 2471033..a97e3fe 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -173,6 +173,9 @@
/* We still have something to talk about... */
val = *alg_data->mif.buf++;
+ if (alg_data->mif.len == 1)
+ val |= stop_bit;
+
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
@@ -246,6 +249,9 @@
__func__);
if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
/*
* Enable interrupt RFDAIE (data in Rx fifo),
* and disable DRMIE (need data for Tx)
@@ -633,6 +639,8 @@
*/
tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ if (tmp > 0x3FF)
+ tmp = 0x3FF;
iowrite32(tmp, I2C_REG_CKH(alg_data));
iowrite32(tmp, I2C_REG_CKL(alg_data));
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 1f5b38b..495be45 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -498,7 +498,7 @@
int i = 0;
/* Locate the apropriate clock setting */
- while (i < ARRAY_SIZE(stu300_clktable) &&
+ while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
stu300_clktable[i].rate < clkrate)
i++;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 1856489..b3b1d2f 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2105,7 +2105,8 @@
blktrc.inb_usage = req->qdio_req.qdio_inb_usage;
blktrc.outb_usage = req->qdio_req.qdio_outb_usage;
- if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
+ if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA &&
+ !(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
blktrc.flags |= ZFCP_BLK_LAT_VALID;
blktrc.channel_lat = lat_in->channel_lat * ticks;
blktrc.fabric_lat = lat_in->fabric_lat * ticks;
@@ -2157,9 +2158,8 @@
fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt);
- zfcp_fsf_req_trace(req, scpnt);
-
skip_fsfstatus:
+ zfcp_fsf_req_trace(req, scpnt);
zfcp_dbf_scsi_result(req->adapter->dbf, scpnt, req);
scpnt->host_scribble = NULL;
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 72617b6..e641922 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -169,6 +169,7 @@
SE_DEBUG(DBG_LVL_1,
"Failed to allocate memory for"
"mgmt_invalidate_icds \n");
+ spin_unlock(&ctrl->mbox_lock);
return -1;
}
nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 6cf9dc3..6b624e7 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -362,6 +362,7 @@
u32 num_ccell;
int ofld_conns_active;
+ wait_queue_head_t eh_wait;
int max_active_conns;
struct iscsi_cid_queue cid_que;
@@ -381,6 +382,7 @@
spinlock_t lock; /* protects hba structure access */
struct mutex net_dev_lock;/* sync net device access */
+ int hba_shutdown_tmo;
/*
* PCI related info.
*/
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 6d8172e..5d9296c 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -177,11 +177,22 @@
struct bnx2i_hba *hba = handle;
/* check if cleanup happened in GOING_DOWN context */
- clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
&hba->adapter_state))
iscsi_host_for_each_session(hba->shost,
bnx2i_drop_session);
+
+ /* Wait for all endpoints to be torn down, Chip will be reset once
+ * control returns to network driver. So it is required to cleanup and
+ * release all connection resources before returning from this routine.
+ */
+ wait_event_interruptible_timeout(hba->eh_wait,
+ (hba->ofld_conns_active == 0),
+ hba->hba_shutdown_tmo);
+ /* This flag should be cleared last so that ep_disconnect() gracefully
+ * cleans up connection context
+ */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
}
/**
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f2e9b18..fa68ab3 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -820,6 +820,11 @@
spin_lock_init(&hba->lock);
mutex_init(&hba->net_dev_lock);
+ init_waitqueue_head(&hba->eh_wait);
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ hba->hba_shutdown_tmo = 240 * HZ;
+ else /* 5706/5708/5709 */
+ hba->hba_shutdown_tmo = 30 * HZ;
if (iscsi_host_add(shost, &hba->pcidev->dev))
goto free_dump_mem;
@@ -1658,8 +1663,8 @@
*/
hba = bnx2i_check_route(dst_addr);
- if (!hba) {
- rc = -ENOMEM;
+ if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+ rc = -EINVAL;
goto check_busy;
}
@@ -1804,7 +1809,7 @@
(bnx2i_ep->state ==
EP_STATE_CONNECT_COMPL)),
msecs_to_jiffies(timeout_ms));
- if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ if (bnx2i_ep->state == EP_STATE_OFLD_FAILED)
rc = -1;
if (rc > 0)
@@ -1957,6 +1962,8 @@
if (!hba->ofld_conns_active)
bnx2i_unreg_dev_all();
+
+ wake_up_interruptible(&hba->eh_wait);
}
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 4967643..0435d04 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -188,7 +188,8 @@
static int adpt_detect(struct scsi_host_template* sht)
{
struct pci_dev *pDev = NULL;
- adpt_hba* pHba;
+ adpt_hba *pHba;
+ adpt_hba *next;
PINFO("Detecting Adaptec I2O RAID controllers...\n");
@@ -206,7 +207,8 @@
}
/* In INIT state, Activate IOPs */
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
// Activate does get status , init outbound, and get hrt
if (adpt_i2o_activate_hba(pHba) < 0) {
adpt_i2o_delete_hba(pHba);
@@ -243,7 +245,8 @@
PDEBUG("HBA's in OPERATIONAL state\n");
printk("dpti: If you have a lot of devices this could take a few minutes.\n");
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name);
if (adpt_i2o_lct_get(pHba) < 0){
adpt_i2o_delete_hba(pHba);
@@ -263,7 +266,8 @@
adpt_sysfs_class = NULL;
}
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
if (adpt_scsi_host_alloc(pHba, sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
@@ -1229,11 +1233,10 @@
}
}
pci_dev_put(pHba->pDev);
- kfree(pHba);
-
if (adpt_sysfs_class)
device_destroy(adpt_sysfs_class,
MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+ kfree(pHba);
if(hba_count <= 0){
unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ff5ec5a..88bad0e 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -323,16 +323,6 @@
srp_cmd->buf_fmt = fmt;
}
-static void unmap_sg_list(int num_entries,
- struct device *dev,
- struct srp_direct_buf *md)
-{
- int i;
-
- for (i = 0; i < num_entries; ++i)
- dma_unmap_single(dev, md[i].va, md[i].len, DMA_BIDIRECTIONAL);
-}
-
/**
* unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
* @cmd: srp_cmd whose additional_data member will be unmapped
@@ -350,24 +340,9 @@
if (out_fmt == SRP_NO_DATA_DESC && in_fmt == SRP_NO_DATA_DESC)
return;
- else if (out_fmt == SRP_DATA_DESC_DIRECT ||
- in_fmt == SRP_DATA_DESC_DIRECT) {
- struct srp_direct_buf *data =
- (struct srp_direct_buf *) cmd->add_data;
- dma_unmap_single(dev, data->va, data->len, DMA_BIDIRECTIONAL);
- } else {
- struct srp_indirect_buf *indirect =
- (struct srp_indirect_buf *) cmd->add_data;
- int num_mapped = indirect->table_desc.len /
- sizeof(struct srp_direct_buf);
- if (num_mapped <= MAX_INDIRECT_BUFS) {
- unmap_sg_list(num_mapped, dev, &indirect->desc_list[0]);
- return;
- }
-
- unmap_sg_list(num_mapped, dev, evt_struct->ext_list);
- }
+ if (evt_struct->cmnd)
+ scsi_dma_unmap(evt_struct->cmnd);
}
static int map_sg_list(struct scsi_cmnd *cmd, int nseg,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 0ee725c..02143af 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -599,7 +599,7 @@
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
- if (sock->sk->sk_sleep && waitqueue_active(sock->sk->sk_sleep)) {
+ if (sock->sk->sk_sleep) {
sock->sk->sk_err = EIO;
wake_up_interruptible(sock->sk->sk_sleep);
}
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index ec37238..d62b3e4 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -433,7 +433,7 @@
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
@@ -1196,7 +1196,7 @@
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 359e9a7..1c7ef55 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2393,6 +2393,7 @@
return 0;
done:
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (bsg_job->request->msgcode == FC_BSG_HST_CT)
kfree(sp->fcport);
kfree(sp->ctx);
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index d0b7d2f..333580b 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1587,7 +1587,7 @@
{
Adapter *host = (Adapter *) SCpnt->device->host->hostdata;
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(SCpnt->device->host->host_lock);
if (wd7000_adapter_reset(host) < 0) {
spin_unlock_irq(SCpnt->device->host->host_lock);
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index a67c622..e2c44ec 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -57,19 +57,8 @@
extern void printques(int);
-#ifdef MODULE
#include <linux/module.h>
#include <linux/interrupt.h>
-
-
-MODULE_LICENSE("GPL");
-
-#endif
-
-#ifndef CONFIG_PCI
-#error "DT3155 : Kernel PCI support not enabled (DT3155 drive requires PCI)"
-#endif
-
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/poll.h>
@@ -84,6 +73,9 @@
#include "dt3155_io.h"
#include "allocator.h"
+
+MODULE_LICENSE("GPL");
+
/* Error variable. Zero means no error. */
int dt3155_errno = 0;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 3aed388..bfec7c2 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -103,7 +103,8 @@
num = min(num, ARRAY_SIZE(vb->pfns));
for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
- struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY);
+ struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY |
+ __GFP_NOMEMALLOC | __GFP_NOWARN);
if (!page) {
if (printk_ratelimit())
dev_printk(KERN_INFO, &vb->vdev->dev,
diff --git a/kernel/cred.c b/kernel/cred.c
index e1dbe9e..62af181 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -398,6 +398,8 @@
error:
put_cred(new);
+ return NULL;
+
free_tgcred:
#ifdef CONFIG_KEYS
kfree(tgcred);
@@ -791,8 +793,6 @@
{
if (cred->magic != CRED_MAGIC)
return true;
- if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
- return true;
#ifdef CONFIG_SECURITY_SELINUX
if (selinux_is_enabled()) {
if ((unsigned long) cred->security < PAGE_SIZE)
diff --git a/security/inode.c b/security/inode.c
index c3a7938..1c812e8 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -161,13 +161,13 @@
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(dentry)) {
+ if (!IS_ERR(*dentry)) {
if ((mode & S_IFMT) == S_IFDIR)
error = mkdir(parent->d_inode, *dentry, mode);
else
error = create(parent->d_inode, *dentry, mode);
} else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;