sh: L-BOX RE2 support.
This adds support for the L-BOX RE2 router.
http://www.nttcom.co.jp/l-box/
L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial,
and LAN x2. This is one of the very few SH boards that a general
person can obtain now.
The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch
adding it to current git.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c
new file mode 100644
index 0000000..fc3cba3
--- /dev/null
+++ b/arch/sh/boards/lboxre2/setup.c
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/sh/boards/lbox/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/lboxre2.h>
+#include <asm/io.h>
+
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = 0x1f0,
+ .end = 0x1f0 + 8 ,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 0x1f0 + 0x206,
+ .end = 0x1f0 +8 + 0x206 + 8,
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ .start = IRQ_CF0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
+static struct platform_device *lboxre2_devices[] __initdata = {
+ &cf_ide_device,
+};
+
+static int __init lboxre2_devices_setup(void)
+{
+ u32 cf0_io_base; /* Boot CF base address */
+ pgprot_t prot;
+ unsigned long paddrbase, psize;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void*)CONFIG_CF0_BASE_ADDR);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16);
+ cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!cf0_io_base) {
+ printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
+ return -ENOMEM;
+ }
+
+ cf_ide_resources[0].start += cf0_io_base ;
+ cf_ide_resources[0].end += cf0_io_base ;
+ cf_ide_resources[1].start += cf0_io_base ;
+ cf_ide_resources[1].end += cf0_io_base ;
+
+ return platform_add_devices(lboxre2_devices,
+ ARRAY_SIZE(lboxre2_devices));
+
+}
+device_initcall(lboxre2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_lboxre2 __initmv = {
+ .mv_name = "L-BOX RE2",
+ .mv_nr_irqs = 72,
+ .mv_init_irq = init_lboxre2_IRQ,
+};
+ALIAS_MV(lboxre2)