xHCI: set link state
Introduce xhci_set_link_state() to remove redundant codes.
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7a62b02..ef03c18 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -392,13 +392,25 @@
return max_ports;
}
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+ int port_id, u32 link_state)
+{
+ u32 temp;
+
+ temp = xhci_readl(xhci, port_array[port_id]);
+ temp = xhci_port_state_to_neutral(temp);
+ temp &= ~PORT_PLS_MASK;
+ temp |= PORT_LINK_STROBE | link_state;
+ xhci_writel(xhci, temp, port_array[port_id]);
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
unsigned long flags;
- u32 temp, temp1, status;
+ u32 temp, status;
int retval = 0;
__le32 __iomem **port_array;
int slot_id;
@@ -472,11 +484,8 @@
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
- temp1 = xhci_port_state_to_neutral(temp);
- temp1 &= ~PORT_PLS_MASK;
- temp1 |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp1, port_array[wIndex]);
-
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
xhci_dbg(xhci, "set port %d resume\n",
wIndex + 1);
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
@@ -573,10 +582,7 @@
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U3;
- xhci_writel(xhci, temp, port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(10); /* wait device to enter */
@@ -610,10 +616,8 @@
}
}
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | link_state;
- xhci_writel(xhci, temp, port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20); /* wait device to enter */
@@ -677,24 +681,13 @@
if ((temp & PORT_PE) == 0)
goto error;
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_RESUME;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
-
- spin_unlock_irqrestore(&xhci->lock,
- flags);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_RESUME);
+ spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
-
- temp = xhci_readl(xhci,
- port_array[wIndex]);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp,
- port_array[wIndex]);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
}
bus_state->port_c_suspend |= 1 << wIndex;
@@ -910,25 +903,18 @@
if (test_bit(port_index, &bus_state->bus_suspended) &&
(temp & PORT_PLS_MASK)) {
if (DEV_SUPERSPEED(temp)) {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_U0);
} else {
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_RESUME;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
msleep(20);
spin_lock_irqsave(&xhci->lock, flags);
- temp = xhci_readl(xhci, port_array[port_index]);
- temp = xhci_port_state_to_neutral(temp);
- temp &= ~PORT_PLS_MASK;
- temp |= PORT_LINK_STROBE | XDEV_U0;
- xhci_writel(xhci, temp, port_array[port_index]);
+ xhci_set_link_state(xhci, port_array,
+ port_index, XDEV_U0);
}
/* wait for the port to enter U0 and report port link
* state change.