drivers/net/wireless: Use wiphy_<level>
Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index bde2fa8..a105087 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -373,8 +373,8 @@
pktlen = status & RDES0_STATUS_FL;
if (pktlen > RX_PKT_SIZE) {
if (net_ratelimit())
- printk(KERN_DEBUG "%s: frame too long (%d)\n",
- wiphy_name(dev->wiphy), pktlen);
+ wiphy_debug(dev->wiphy, "frame too long (%d)\n",
+ pktlen);
pktlen = RX_PKT_SIZE;
}
@@ -454,10 +454,10 @@
static irqreturn_t adm8211_interrupt(int irq, void *dev_id)
{
-#define ADM8211_INT(x) \
-do { \
- if (unlikely(stsr & ADM8211_STSR_ ## x)) \
- printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \
+#define ADM8211_INT(x) \
+do { \
+ if (unlikely(stsr & ADM8211_STSR_ ## x)) \
+ wiphy_debug(dev->wiphy, "%s\n", #x); \
} while (0)
struct ieee80211_hw *dev = dev_id;
@@ -570,9 +570,9 @@
}
if (timeout == 0) {
- printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
- " prewrite (reg=0x%08x)\n",
- wiphy_name(dev->wiphy), addr, data, reg);
+ wiphy_debug(dev->wiphy,
+ "adm8211_write_bbp(%d,%d) failed prewrite (reg=0x%08x)\n",
+ addr, data, reg);
return -ETIMEDOUT;
}
@@ -605,9 +605,9 @@
if (timeout == 0) {
ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) &
~ADM8211_BBPCTL_WR);
- printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed"
- " postwrite (reg=0x%08x)\n",
- wiphy_name(dev->wiphy), addr, data, reg);
+ wiphy_debug(dev->wiphy,
+ "adm8211_write_bbp(%d,%d) failed postwrite (reg=0x%08x)\n",
+ addr, data, reg);
return -ETIMEDOUT;
}
@@ -675,8 +675,8 @@
break;
default:
- printk(KERN_DEBUG "%s: unsupported transceiver type %d\n",
- wiphy_name(dev->wiphy), priv->transceiver_type);
+ wiphy_debug(dev->wiphy, "unsupported transceiver type %d\n",
+ priv->transceiver_type);
break;
}
@@ -732,8 +732,8 @@
/* Nothing to do for ADMtek BBP */
} else if (priv->bbp_type != ADM8211_TYPE_ADMTEK)
- printk(KERN_DEBUG "%s: unsupported BBP type %d\n",
- wiphy_name(dev->wiphy), priv->bbp_type);
+ wiphy_debug(dev->wiphy, "unsupported bbp type %d\n",
+ priv->bbp_type);
ADM8211_RESTORE();
@@ -1027,13 +1027,12 @@
break;
default:
- printk(KERN_DEBUG "%s: unsupported transceiver %d\n",
- wiphy_name(dev->wiphy), priv->transceiver_type);
+ wiphy_debug(dev->wiphy, "unsupported transceiver %d\n",
+ priv->transceiver_type);
break;
}
} else
- printk(KERN_DEBUG "%s: unsupported BBP %d\n",
- wiphy_name(dev->wiphy), priv->bbp_type);
+ wiphy_debug(dev->wiphy, "unsupported bbp %d\n", priv->bbp_type);
ADM8211_CSR_WRITE(SYNRF, 0);
@@ -1509,15 +1508,13 @@
/* Power up MAC and RF chips */
retval = adm8211_hw_reset(dev);
if (retval) {
- printk(KERN_ERR "%s: hardware reset failed\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "hardware reset failed\n");
goto fail;
}
retval = adm8211_init_rings(dev);
if (retval) {
- printk(KERN_ERR "%s: failed to initialize rings\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "failed to initialize rings\n");
goto fail;
}
@@ -1528,8 +1525,7 @@
retval = request_irq(priv->pdev->irq, adm8211_interrupt,
IRQF_SHARED, "adm8211", dev);
if (retval) {
- printk(KERN_ERR "%s: failed to register IRQ handler\n",
- wiphy_name(dev->wiphy));
+ wiphy_err(dev->wiphy, "failed to register irq handler\n");
goto fail;
}
@@ -1906,9 +1902,8 @@
goto err_free_eeprom;
}
- printk(KERN_INFO "%s: hwaddr %pM, Rev 0x%02x\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
- pdev->revision);
+ wiphy_info(dev->wiphy, "hwaddr %pm, rev 0x%02x\n",
+ dev->wiphy->perm_addr, pdev->revision);
return 0;