drivers/net/wireless: Use wiphy_<level>
Standardize the logging macros used.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index cd8caea..9b0f055 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -658,8 +658,8 @@
exit:
kfree(hwcfg);
if (ret < 0)
- printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "cannot get hw config (error %d)\n",
+ ret);
return ret;
}
@@ -794,8 +794,9 @@
do {
status = at76_get_cmd_status(priv->udev, cmd);
if (status < 0) {
- printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
- wiphy_name(priv->hw->wiphy), status);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_cmd_status failed: %d\n",
+ status);
break;
}
@@ -810,9 +811,8 @@
schedule_timeout_interruptible(HZ / 10); /* 100 ms */
if (time_after(jiffies, timeout)) {
- printk(KERN_ERR
- "%s: completion timeout for command %d\n",
- wiphy_name(priv->hw->wiphy), cmd);
+ wiphy_err(priv->hw->wiphy,
+ "completion timeout for command %d\n", cmd);
status = -ETIMEDOUT;
break;
}
@@ -833,9 +833,9 @@
ret = at76_wait_completion(priv, CMD_SET_MIB);
if (ret != CMD_STATUS_COMPLETE) {
- printk(KERN_INFO
- "%s: set_mib: at76_wait_completion failed "
- "with %d\n", wiphy_name(priv->hw->wiphy), ret);
+ wiphy_info(priv->hw->wiphy,
+ "set_mib: at76_wait_completion failed with %d\n",
+ ret);
ret = -EIO;
}
@@ -855,8 +855,8 @@
ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
if (ret < 0)
- printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
- wiphy_name(priv->hw->wiphy), cmd, ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_set_card_command(%d) failed: %d\n", cmd, ret);
else
ret = 1;
@@ -876,8 +876,8 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
+ ret);
return ret;
}
@@ -893,8 +893,8 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
+ ret);
return ret;
}
@@ -910,8 +910,8 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (frag threshold) failed: %d\n", ret);
return ret;
}
@@ -927,8 +927,7 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);
return ret;
}
@@ -944,8 +943,8 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (autorate fallback) failed: %d\n", ret);
return ret;
}
@@ -963,8 +962,8 @@
ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
sizeof(struct mib_mac_addr));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_addr) failed: %d\n", ret);
goto exit;
}
@@ -992,8 +991,8 @@
ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
sizeof(struct mib_mac_wep));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_wep) failed: %d\n", ret);
goto exit;
}
@@ -1029,8 +1028,8 @@
ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
sizeof(struct mib_mac_mgmt));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac_mgmt) failed: %d\n", ret);
goto exit;
}
@@ -1065,8 +1064,8 @@
ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mac) failed: %d\n", ret);
goto exit;
}
@@ -1102,8 +1101,8 @@
ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (phy) failed: %d\n", ret);
goto exit;
}
@@ -1135,8 +1134,8 @@
ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (local) failed: %d\n", ret);
goto exit;
}
@@ -1161,8 +1160,8 @@
ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
sizeof(struct mib_mdomain));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "at76_get_mib (mdomain) failed: %d\n", ret);
goto exit;
}
@@ -1233,16 +1232,16 @@
struct sk_buff *skb = priv->rx_skb;
if (!priv->rx_urb) {
- printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
- wiphy_name(priv->hw->wiphy), __func__);
+ wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is null\n",
+ __func__);
return -EFAULT;
}
if (!skb) {
skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
if (!skb) {
- printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "cannot allocate rx skbuff\n");
ret = -ENOMEM;
goto exit;
}
@@ -1261,15 +1260,14 @@
at76_dbg(DBG_DEVSTART,
"usb_submit_urb returned -ENODEV");
else
- printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "rx, usb_submit_urb failed: %d\n", ret);
}
exit:
if (ret < 0 && ret != -ENODEV)
- printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
- "driver and/or power cycle the device\n",
- wiphy_name(priv->hw->wiphy));
+ wiphy_err(priv->hw->wiphy,
+ "cannot submit rx urb - please unload the driver and/or power cycle the device\n");
return ret;
}
@@ -1438,8 +1436,8 @@
ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
sizeof(struct at76_card_config));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
return ret;
}
@@ -1504,8 +1502,8 @@
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
- printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy,
+ "set_mib (promiscuous_mode) failed: %d\n", ret);
mutex_unlock(&priv->mtx);
}
@@ -1668,16 +1666,16 @@
sizeof(struct at76_req_join));
if (ret < 0) {
- printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
+ ret);
return 0;
}
ret = at76_wait_completion(priv, CMD_JOIN);
at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
if (ret != CMD_STATUS_COMPLETE) {
- printk(KERN_ERR "%s: at76_wait_completion failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
+ ret);
return 0;
}
@@ -1745,8 +1743,8 @@
at76_dbg(DBG_MAC80211, "%s()", __func__);
if (priv->tx_urb->status == -EINPROGRESS) {
- printk(KERN_ERR "%s: %s called while tx urb is pending\n",
- wiphy_name(priv->hw->wiphy), __func__);
+ wiphy_err(priv->hw->wiphy,
+ "%s called while tx urb is pending\n", __func__);
return NETDEV_TX_BUSY;
}
@@ -1794,13 +1792,12 @@
submit_len, at76_mac80211_tx_callback, priv);
ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
if (ret) {
- printk(KERN_ERR "%s: error in tx submit urb: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
if (ret == -EINVAL)
- printk(KERN_ERR
- "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
- wiphy_name(priv->hw->wiphy), priv->tx_urb,
- priv->tx_urb->hcpriv, priv->tx_urb->complete);
+ wiphy_err(priv->hw->wiphy,
+ "-einval: tx urb %p hcpriv %p complete %p\n",
+ priv->tx_urb,
+ priv->tx_urb->hcpriv, priv->tx_urb->complete);
}
return 0;
@@ -1817,8 +1814,8 @@
ret = at76_submit_rx_urb(priv);
if (ret < 0) {
- printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
- wiphy_name(priv->hw->wiphy), ret);
+ wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
+ ret);
goto error;
}
@@ -2316,14 +2313,12 @@
priv->mac80211_registered = 1;
- printk(KERN_INFO "%s: USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
- wiphy_name(priv->hw->wiphy),
- dev_name(&interface->dev), priv->mac_addr,
- priv->fw_version.major, priv->fw_version.minor,
- priv->fw_version.patch, priv->fw_version.build);
- printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
- wiphy_name(priv->hw->wiphy),
- priv->regulatory_domain, priv->domain->name);
+ wiphy_info(priv->hw->wiphy, "usb %s, mac %pm, firmware %d.%d.%d-%d\n",
+ dev_name(&interface->dev), priv->mac_addr,
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+ wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
+ priv->regulatory_domain, priv->domain->name);
exit:
return ret;
@@ -2485,7 +2480,7 @@
if (!priv)
return;
- printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy));
+ wiphy_info(priv->hw->wiphy, "disconnecting\n");
at76_delete_device(priv);
dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
}