[libata] Improve timeout handling
On a timeout call a device specific handler early in the recovery so that
we can complete and process successful commands which timed out due to IRQ
loss or the like rather more elegantly.
[Revised to exclude the timeout handling on a few devices that inherit from
SFF but are not SFF enough to use the default timeout handler]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9a10cb0..8332e97 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -65,6 +65,8 @@
.sff_irq_on = ata_sff_irq_on,
.sff_irq_clear = ata_sff_irq_clear,
+ .lost_interrupt = ata_sff_lost_interrupt,
+
.port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
@@ -1647,7 +1649,7 @@
* RETURNS:
* One if interrupt was handled, zero if not (shared irq).
*/
-inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+unsigned int ata_sff_host_intr(struct ata_port *ap,
struct ata_queued_cmd *qc)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
@@ -1776,6 +1778,48 @@
EXPORT_SYMBOL_GPL(ata_sff_interrupt);
/**
+ * ata_sff_lost_interrupt - Check for an apparent lost interrupt
+ * @ap: port that appears to have timed out
+ *
+ * Called from the libata error handlers when the core code suspects
+ * an interrupt has been lost. If it has complete anything we can and
+ * then return. Interface must support altstatus for this faster
+ * recovery to occur.
+ *
+ * Locking:
+ * Caller holds host lock
+ */
+
+void ata_sff_lost_interrupt(struct ata_port *ap)
+{
+ u8 status;
+ struct ata_queued_cmd *qc;
+
+ /* Only one outstanding command per SFF channel */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ /* Check we have a live one.. */
+ if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE))
+ return;
+ /* We cannot lose an interrupt on a polled command */
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return;
+ /* See if the controller thinks it is still busy - if so the command
+ isn't a lost IRQ but is still in progress */
+ status = ata_sff_altstatus(ap);
+ if (status & ATA_BUSY)
+ return;
+
+ /* There was a command running, we are no longer busy and we have
+ no interrupt. */
+ ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n",
+ status);
+ /* Run the host interrupt logic as if the interrupt had not been
+ lost */
+ ata_sff_host_intr(ap, qc);
+}
+EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
+
+/**
* ata_sff_freeze - Freeze SFF controller port
* @ap: port to freeze
*