OMAP3 clock: add a short delay when lowering CORE clk rate
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2
divider, add a short delay before returning to SDRAM to allow the SDRC
time to stabilize. Without this delay, the system is prone to random
panics upon re-entering SDRAM.
This time delay varies based on MPU frequency. At 500MHz MPU frequency at
room temperature, 64 loops seems to work okay; so add another 32 loops for
environmental and process variation.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 5458ab3..4bfa650 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -286,6 +286,20 @@
#define MIN_SDRC_DLL_LOCK_FREQ 83000000
+#define CYCLES_PER_MHZ 1000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE 8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT 9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS 96
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -709,7 +723,8 @@
{
u32 new_div = 0;
u32 unlock_dll = 0;
- unsigned long validrate, sdrcrate;
+ u32 c;
+ unsigned long validrate, sdrcrate, mpurate;
struct omap_sdrc_params *sp;
if (!clk || !rate)
@@ -737,6 +752,17 @@
unlock_dll = 1;
}
+ /*
+ * XXX This only needs to be done when the CPU frequency changes
+ */
+ mpurate = arm_fck.rate / CYCLES_PER_MHZ;
+ c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+ c += 1; /* for safety */
+ c *= SDRC_MPURATE_LOOPS;
+ c >>= SDRC_MPURATE_SCALE;
+ if (c == 0)
+ c = 1;
+
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
@@ -747,7 +773,7 @@
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div, unlock_dll);
+ sp->actim_ctrlb, new_div, unlock_dll, c);
return 0;
}
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 84781a6..8d4a88c 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -42,10 +42,14 @@
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
* r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
* SDRC rates < 83MHz
+ * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ * reprogramming the SDRC when switching to a slower MPU speed
+ *
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
ldr r4, [sp, #52] @ pull extra args off the stack
+ ldr r5, [sp, #56] @ load extra args from the stack
dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
@@ -59,7 +63,11 @@
bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
- blne configure_sdrc
+ beq return_to_sdram
+ bl configure_sdrc
+ mov r12, r5 @ if slowing, wait for SDRC to stabilize
+ bl wait_clk_stable
+return_to_sdram:
isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
@@ -106,16 +114,6 @@
wait_clk_stable:
subs r12, r12, #1
bne wait_clk_stable
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
bx lr
enable_sdrc:
ldr r11, omap3_cm_iclken1_core
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index dca7c16..c32fa0a 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -24,7 +24,7 @@
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll);
+ u32 unlock_dll, u32 f);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -62,7 +62,7 @@
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll);
+ u32 unlock_dll, u32 f);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a5b9bcd..79c0f02 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -371,15 +371,17 @@
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
- u32 m2, u32 unlock_dll);
+ u32 m2, u32 unlock_dll,
+ u32 f);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
+ u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
+ u32 f)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
sdrc_actim_ctrlb, m2,
- unlock_dll);
+ unlock_dll, f);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */