[ALSA] Update documentation for ice1712 and ice1724
Documentation,ICE1712 driver
Updated the documentation for ice1712 and ice1724 drivers.
Added the device description for shuttle SN25P missing in the last patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 5a7f7f5..bb31ae7 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -688,15 +688,19 @@
* TerraTec EWS 88D
* TerraTec EWX 24/96
* TerraTec DMX 6Fire
+ * TerraTec Phase 88
* Hoontech SoundTrack DSP 24
* Hoontech SoundTrack DSP 24 Value
* Hoontech SoundTrack DSP 24 Media 7.1
+ * Event Electronics, EZ8
* Digigram VX442
+ * Lionstracs, Mediastaton
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
- dmx6fire, dsp24, dsp24_value, dsp24_71, ez8
+ dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
+ phase88, mediastation
omni - Omni I/O support for MidiMan M-Audio Delta44/66
cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)
in msec resolution, default value is 500 (0.5 sec)
@@ -705,20 +709,44 @@
is not used with all Envy24 based cards (for example in the MidiMan Delta
serie).
+ Note: The supported board is detected by reading EEPROM or PCI
+ SSID (if EEPROM isn't available). You can override the
+ model by passing "model" module option in case that the
+ driver isn't configured properly or you want to try another
+ type for testing.
+
Module snd-ice1724
------------------
- Module for Envy24HT (VT/ICE1724) based PCI sound cards.
+ Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
* MidiMan M Audio Revolution 7.1
* AMP Ltd AUDIO2000
- * TerraTec Aureon Sky-5.1, Space-7.1
+ * TerraTec Aureon 5.1 Sky
+ * TerraTec Aureon 7.1 Space
+ * TerraTec Aureon 7.1 Universe
+ * TerraTec Phase 22
+ * TerraTec Phase 28
+ * AudioTrak Prodigy 7.1
+ * AudioTrak Prodigy 192
+ * Pontis MS300
+ * Albatron K8X800 Pro II
+ * Chaintech ZNF3-150
+ * Chaintech ZNF3-250
+ * Chaintech 9CJS
+ * Shuttle SN25P
model - Use the given board model, one of the following:
- revo71, amp2000, prodigy71, aureon51, aureon71,
- k8x800
+ revo71, amp2000, prodigy71, prodigy192, aureon51,
+ aureon71, universe, k8x800, phase22, phase28, ms300
Module supports up to 8 cards and autoprobe.
+ Note: The supported board is detected by reading EEPROM or PCI
+ SSID (if EEPROM isn't available). You can override the
+ model by passing "model" module option in case that the
+ driver isn't configured properly or you want to try another
+ type for testing.
+
Module snd-intel8x0
-------------------