| /* |
| * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC |
| * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, |
| * AT91SAM9X25, AT91SAM9X35 SoC |
| * |
| * Copyright (C) 2012 Atmel, |
| * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/pinctrl/at91.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Atmel AT91SAM9x5 family SoC"; |
| compatible = "atmel,at91sam9x5"; |
| interrupt-parent = <&aic>; |
| |
| aliases { |
| serial0 = &dbgu; |
| serial1 = &usart0; |
| serial2 = &usart1; |
| serial3 = &usart2; |
| gpio0 = &pioA; |
| gpio1 = &pioB; |
| gpio2 = &pioC; |
| gpio3 = &pioD; |
| tcb0 = &tcb0; |
| tcb1 = &tcb1; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| ssc0 = &ssc0; |
| }; |
| cpus { |
| cpu@0 { |
| compatible = "arm,arm926ejs"; |
| }; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x10000000>; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| aic: interrupt-controller@fffff000 { |
| #interrupt-cells = <3>; |
| compatible = "atmel,at91rm9200-aic"; |
| interrupt-controller; |
| reg = <0xfffff000 0x200>; |
| atmel,external-irqs = <31>; |
| }; |
| |
| ramc0: ramc@ffffe800 { |
| compatible = "atmel,at91sam9g45-ddramc"; |
| reg = <0xffffe800 0x200>; |
| }; |
| |
| pmc: pmc@fffffc00 { |
| compatible = "atmel,at91rm9200-pmc"; |
| reg = <0xfffffc00 0x100>; |
| }; |
| |
| rstc@fffffe00 { |
| compatible = "atmel,at91sam9g45-rstc"; |
| reg = <0xfffffe00 0x10>; |
| }; |
| |
| shdwc@fffffe10 { |
| compatible = "atmel,at91sam9x5-shdwc"; |
| reg = <0xfffffe10 0x10>; |
| }; |
| |
| pit: timer@fffffe30 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xfffffe30 0xf>; |
| interrupts = <1 4 7>; |
| }; |
| |
| tcb0: timer@f8008000 { |
| compatible = "atmel,at91sam9x5-tcb"; |
| reg = <0xf8008000 0x100>; |
| interrupts = <17 4 0>; |
| }; |
| |
| tcb1: timer@f800c000 { |
| compatible = "atmel,at91sam9x5-tcb"; |
| reg = <0xf800c000 0x100>; |
| interrupts = <17 4 0>; |
| }; |
| |
| dma0: dma-controller@ffffec00 { |
| compatible = "atmel,at91sam9g45-dma"; |
| reg = <0xffffec00 0x200>; |
| interrupts = <20 4 0>; |
| #dma-cells = <2>; |
| }; |
| |
| dma1: dma-controller@ffffee00 { |
| compatible = "atmel,at91sam9g45-dma"; |
| reg = <0xffffee00 0x200>; |
| interrupts = <21 4 0>; |
| #dma-cells = <2>; |
| }; |
| |
| pinctrl@fffff400 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; |
| ranges = <0xfffff400 0xfffff400 0x800>; |
| |
| /* shared pinctrl settings */ |
| dbgu { |
| pinctrl_dbgu: dbgu-0 { |
| atmel,pins = |
| <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ |
| AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ |
| }; |
| }; |
| |
| usart0 { |
| pinctrl_usart0: usart0-0 { |
| atmel,pins = |
| <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ |
| AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ |
| }; |
| |
| pinctrl_usart0_rts: usart0_rts-0 { |
| atmel,pins = |
| <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ |
| }; |
| |
| pinctrl_usart0_cts: usart0_cts-0 { |
| atmel,pins = |
| <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ |
| }; |
| |
| pinctrl_usart0_sck: usart0_sck-0 { |
| atmel,pins = |
| <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ |
| }; |
| }; |
| |
| usart1 { |
| pinctrl_usart1: usart1-0 { |
| atmel,pins = |
| <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ |
| AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ |
| }; |
| |
| pinctrl_usart1_rts: usart1_rts-0 { |
| atmel,pins = |
| <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ |
| }; |
| |
| pinctrl_usart1_cts: usart1_cts-0 { |
| atmel,pins = |
| <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ |
| }; |
| |
| pinctrl_usart1_sck: usart1_sck-0 { |
| atmel,pins = |
| <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ |
| }; |
| }; |
| |
| usart2 { |
| pinctrl_usart2: usart2-0 { |
| atmel,pins = |
| <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ |
| AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ |
| }; |
| |
| pinctrl_uart2_rts: uart2_rts-0 { |
| atmel,pins = |
| <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ |
| }; |
| |
| pinctrl_uart2_cts: uart2_cts-0 { |
| atmel,pins = |
| <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ |
| }; |
| |
| pinctrl_usart2_sck: usart2_sck-0 { |
| atmel,pins = |
| <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ |
| }; |
| }; |
| |
| usart3 { |
| pinctrl_usart3: usart3-0 { |
| atmel,pins = |
| <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ |
| AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ |
| }; |
| |
| pinctrl_usart3_rts: usart3_rts-0 { |
| atmel,pins = |
| <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ |
| }; |
| |
| pinctrl_usart3_cts: usart3_cts-0 { |
| atmel,pins = |
| <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ |
| }; |
| |
| pinctrl_usart3_sck: usart3_sck-0 { |
| atmel,pins = |
| <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ |
| }; |
| }; |
| |
| uart0 { |
| pinctrl_uart0: uart0-0 { |
| atmel,pins = |
| <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ |
| AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1: uart1-0 { |
| atmel,pins = |
| <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ |
| AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ |
| }; |
| }; |
| |
| nand { |
| pinctrl_nand: nand-0 { |
| atmel,pins = |
| <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ |
| AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ |
| AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ |
| AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ |
| AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ |
| AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ |
| AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ |
| AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ |
| AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ |
| AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ |
| AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ |
| AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ |
| AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ |
| AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ |
| }; |
| |
| pinctrl_nand_16bits: nand_16bits-0 { |
| atmel,pins = |
| <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ |
| AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ |
| AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ |
| AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ |
| AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ |
| AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ |
| AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ |
| AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ |
| }; |
| }; |
| |
| macb0 { |
| pinctrl_macb0_rmii: macb0_rmii-0 { |
| atmel,pins = |
| <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ |
| AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ |
| AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ |
| AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ |
| AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ |
| AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ |
| AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ |
| AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ |
| AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ |
| AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ |
| }; |
| |
| pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { |
| atmel,pins = |
| <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ |
| AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ |
| AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ |
| AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ |
| AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ |
| AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ |
| AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ |
| AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ |
| }; |
| }; |
| |
| mmc0 { |
| pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ |
| AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ |
| AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ |
| AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ |
| AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ |
| }; |
| }; |
| |
| mmc1 { |
| pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ |
| AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ |
| AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ |
| }; |
| |
| pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ |
| AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ |
| AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ |
| }; |
| }; |
| |
| ssc0 { |
| pinctrl_ssc0_tx: ssc0_tx-0 { |
| atmel,pins = |
| <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ |
| AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ |
| AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ |
| }; |
| |
| pinctrl_ssc0_rx: ssc0_rx-0 { |
| atmel,pins = |
| <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ |
| AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ |
| AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ |
| }; |
| }; |
| |
| spi0 { |
| pinctrl_spi0: spi0-0 { |
| atmel,pins = |
| <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ |
| AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ |
| AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ |
| }; |
| }; |
| |
| spi1 { |
| pinctrl_spi1: spi1-0 { |
| atmel,pins = |
| <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ |
| AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ |
| AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ |
| }; |
| }; |
| |
| i2c0 { |
| pinctrl_i2c0: i2c0-0 { |
| atmel,pins = |
| <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ |
| AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ |
| }; |
| }; |
| |
| i2c1 { |
| pinctrl_i2c1: i2c1-0 { |
| atmel,pins = |
| <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ |
| AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2: i2c2-0 { |
| atmel,pins = |
| <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ |
| AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ |
| }; |
| }; |
| |
| i2c_gpio0 { |
| pinctrl_i2c_gpio0: i2c_gpio0-0 { |
| atmel,pins = |
| <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ |
| AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ |
| }; |
| }; |
| |
| i2c_gpio1 { |
| pinctrl_i2c_gpio1: i2c_gpio1-0 { |
| atmel,pins = |
| <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ |
| AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ |
| }; |
| }; |
| |
| i2c_gpio2 { |
| pinctrl_i2c_gpio2: i2c_gpio2-0 { |
| atmel,pins = |
| <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ |
| AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ |
| }; |
| }; |
| |
| pioA: gpio@fffff400 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff400 0x200>; |
| interrupts = <2 4 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pioB: gpio@fffff600 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff600 0x200>; |
| interrupts = <2 4 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #gpio-lines = <19>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pioC: gpio@fffff800 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffff800 0x200>; |
| interrupts = <3 4 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pioD: gpio@fffffa00 { |
| compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| reg = <0xfffffa00 0x200>; |
| interrupts = <3 4 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #gpio-lines = <22>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| ssc0: ssc@f0010000 { |
| compatible = "atmel,at91sam9g45-ssc"; |
| reg = <0xf0010000 0x4000>; |
| interrupts = <28 4 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@f0008000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xf0008000 0x600>; |
| interrupts = <12 4 0>; |
| dmas = <&dma0 1 0>; |
| dma-names = "rxtx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@f000c000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xf000c000 0x600>; |
| interrupts = <26 4 0>; |
| dmas = <&dma1 1 0>; |
| dma-names = "rxtx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| dbgu: serial@fffff200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfffff200 0x200>; |
| interrupts = <1 4 7>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dbgu>; |
| status = "disabled"; |
| }; |
| |
| usart0: serial@f801c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf801c000 0x200>; |
| interrupts = <5 4 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart0>; |
| status = "disabled"; |
| }; |
| |
| usart1: serial@f8020000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8020000 0x200>; |
| interrupts = <6 4 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart1>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@f8024000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8024000 0x200>; |
| interrupts = <7 4 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart2>; |
| status = "disabled"; |
| }; |
| |
| macb0: ethernet@f802c000 { |
| compatible = "cdns,at32ap7000-macb", "cdns,macb"; |
| reg = <0xf802c000 0x100>; |
| interrupts = <24 4 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_macb0_rmii>; |
| status = "disabled"; |
| }; |
| |
| macb1: ethernet@f8030000 { |
| compatible = "cdns,at32ap7000-macb", "cdns,macb"; |
| reg = <0xf8030000 0x100>; |
| interrupts = <27 4 3>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@f8010000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf8010000 0x100>; |
| interrupts = <9 4 6>; |
| dmas = <&dma0 1 7>, |
| <&dma0 1 8>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@f8014000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf8014000 0x100>; |
| interrupts = <10 4 6>; |
| dmas = <&dma1 1 5>, |
| <&dma1 1 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@f8018000 { |
| compatible = "atmel,at91sam9x5-i2c"; |
| reg = <0xf8018000 0x100>; |
| interrupts = <11 4 6>; |
| dmas = <&dma0 1 9>, |
| <&dma0 1 10>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@f804c000 { |
| compatible = "atmel,at91sam9260-adc"; |
| reg = <0xf804c000 0x100>; |
| interrupts = <19 4 0>; |
| atmel,adc-use-external; |
| atmel,adc-channels-used = <0xffff>; |
| atmel,adc-vref = <3300>; |
| atmel,adc-num-channels = <12>; |
| atmel,adc-startup-time = <40>; |
| atmel,adc-channel-base = <0x50>; |
| atmel,adc-drdy-mask = <0x1000000>; |
| atmel,adc-status-register = <0x30>; |
| atmel,adc-trigger-register = <0xc0>; |
| atmel,adc-res = <8 10>; |
| atmel,adc-res-names = "lowres", "highres"; |
| atmel,adc-use-res = "highres"; |
| |
| trigger@0 { |
| trigger-name = "external-rising"; |
| trigger-value = <0x1>; |
| trigger-external; |
| }; |
| |
| trigger@1 { |
| trigger-name = "external-falling"; |
| trigger-value = <0x2>; |
| trigger-external; |
| }; |
| |
| trigger@2 { |
| trigger-name = "external-any"; |
| trigger-value = <0x3>; |
| trigger-external; |
| }; |
| |
| trigger@3 { |
| trigger-name = "continuous"; |
| trigger-value = <0x6>; |
| }; |
| }; |
| |
| spi0: spi@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf0000000 0x100>; |
| interrupts = <13 4 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@f0004000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf0004000 0x100>; |
| interrupts = <14 4 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi1>; |
| status = "disabled"; |
| }; |
| |
| rtc@fffffeb0 { |
| compatible = "atmel,at91rm9200-rtc"; |
| reg = <0xfffffeb0 0x40>; |
| interrupts = <1 4 7>; |
| status = "disabled"; |
| }; |
| }; |
| |
| nand0: nand@40000000 { |
| compatible = "atmel,at91rm9200-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40000000 0x10000000 |
| 0xffffe000 0x600 /* PMECC Registers */ |
| 0xffffe600 0x200 /* PMECC Error Location Registers */ |
| 0x00108000 0x18000 /* PMECC looup table in ROM code */ |
| >; |
| atmel,pmecc-lookup-table-offset = <0x0 0x8000>; |
| atmel,nand-addr-offset = <21>; |
| atmel,nand-cmd-offset = <22>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nand>; |
| gpios = <&pioD 5 GPIO_ACTIVE_HIGH |
| &pioD 4 GPIO_ACTIVE_HIGH |
| 0 |
| >; |
| status = "disabled"; |
| }; |
| |
| usb0: ohci@00600000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00600000 0x100000>; |
| interrupts = <22 4 2>; |
| status = "disabled"; |
| }; |
| |
| usb1: ehci@00700000 { |
| compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| reg = <0x00700000 0x100000>; |
| interrupts = <22 4 2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| i2c@0 { |
| compatible = "i2c-gpio"; |
| gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ |
| &pioA 31 GPIO_ACTIVE_HIGH /* scl */ |
| >; |
| i2c-gpio,sda-open-drain; |
| i2c-gpio,scl-open-drain; |
| i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c_gpio0>; |
| status = "disabled"; |
| }; |
| |
| i2c@1 { |
| compatible = "i2c-gpio"; |
| gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ |
| &pioC 1 GPIO_ACTIVE_HIGH /* scl */ |
| >; |
| i2c-gpio,sda-open-drain; |
| i2c-gpio,scl-open-drain; |
| i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c_gpio1>; |
| status = "disabled"; |
| }; |
| |
| i2c@2 { |
| compatible = "i2c-gpio"; |
| gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ |
| &pioB 5 GPIO_ACTIVE_HIGH /* scl */ |
| >; |
| i2c-gpio,sda-open-drain; |
| i2c-gpio,scl-open-drain; |
| i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c_gpio2>; |
| status = "disabled"; |
| }; |
| }; |