V4L/DVB: em28xx: fix for "Leadtek winfast tv usbii deluxe"
fix Video/Sound support "Leadtek winfast tv usbii deluxe".
Now, it is working Stereo, IR, Radio, TV, Svideo and Composite.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/IR/ir-keymaps.c b/drivers/media/IR/ir-keymaps.c
index 9bbe6b1..71b3278 100644
--- a/drivers/media/IR/ir-keymaps.c
+++ b/drivers/media/IR/ir-keymaps.c
@@ -3393,3 +3393,51 @@
};
EXPORT_SYMBOL_GPL(ir_codes_nec_terratec_cinergy_xs_table);
+
+/* Leadtek Winfast TV USB II Deluxe remote
+ Magnus Alm <magnus.alm@gmail.com>
+ */
+static struct ir_scancode ir_codes_winfast_usbii_deluxe[] = {
+ { 0x62, KEY_0},
+ { 0x75, KEY_1},
+ { 0x76, KEY_2},
+ { 0x77, KEY_3},
+ { 0x79, KEY_4},
+ { 0x7a, KEY_5},
+ { 0x7b, KEY_6},
+ { 0x7d, KEY_7},
+ { 0x7e, KEY_8},
+ { 0x7f, KEY_9},
+
+ { 0x38, KEY_CAMERA}, /* SNAPSHOT */
+ { 0x37, KEY_RECORD}, /* RECORD */
+ { 0x35, KEY_TIME}, /* TIMESHIFT */
+
+ { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */
+ { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
+ { 0x64, KEY_MUTE}, /* MUTE */
+
+ { 0x21, KEY_CHANNEL}, /* SURF */
+ { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */
+ { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */
+ { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */
+
+ { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */
+
+ { 0x70, KEY_POWER2}, /* TV ON/OFF */
+
+ { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */
+ { 0x3a, KEY_NEW}, /* PIP */
+ { 0x73, KEY_ZOOM}, /* FULLSECREEN */
+
+ { 0x66, KEY_INFO}, /* OSD (DISPLAY) */
+
+ { 0x31, KEY_DOT}, /* '.' */
+ { 0x63, KEY_ENTER}, /* ENTER */
+
+};
+struct ir_scancode_table ir_codes_winfast_usbii_deluxe_table = {
+ .scan = ir_codes_winfast_usbii_deluxe,
+ .size = ARRAY_SIZE(ir_codes_winfast_usbii_deluxe),
+};
+EXPORT_SYMBOL_GPL(ir_codes_winfast_usbii_deluxe_table);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 2510000..b1c5d95 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -461,21 +461,30 @@
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
- .tda9887_conf = TDA9887_PRESENT,
+ .has_ir_i2c = 1,
+ .tvaudio_addr = 0x58,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT2_ACTIVE |
+ TDA9887_QSS,
.decoder = EM28XX_SAA711X,
+ .adecoder = EM28XX_TVAUDIO,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
- .vmux = SAA7115_COMPOSITE2,
- .amux = EM28XX_AMUX_VIDEO,
+ .vmux = SAA7115_COMPOSITE4,
+ .amux = EM28XX_AMUX_AUX,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
+ .radio = {
+ .type = EM28XX_RADIO,
+ .amux = EM28XX_AMUX_AUX,
+ }
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
@@ -2259,9 +2268,12 @@
/* ----------------------------------------------------------------------- */
void em28xx_register_i2c_ir(struct em28xx *dev)
{
+ /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
+ /* at address 0x18, so if that address is needed for another board in */
+ /* the future, please put it after 0x1f. */
struct i2c_board_info info;
const unsigned short addr_list[] = {
- 0x30, 0x47, I2C_CLIENT_END
+ 0x1f, 0x30, 0x47, I2C_CLIENT_END
};
if (disable_ir)
@@ -2344,6 +2356,11 @@
dev->board.has_msp34xx = 1;
}
break;
+ case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
+ dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
+ dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
+ dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
+ break;
}
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, 0x0d, 0x42);
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 69dcf0c..1fb754e 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -184,6 +184,36 @@
return 1;
}
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char subaddr, keydetect, key;
+
+ struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1},
+
+ { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
+
+ subaddr = 0x10;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (keydetect == 0x00)
+ return 0;
+
+ subaddr = 0x00;
+ msg[1].buf = &key;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (key == 0x00)
+ return 0;
+
+ *ir_key = key;
+ *ir_raw = key;
+ return 1;
+}
+
/**********************************************************
Poll based get keycode functions
**********************************************************/
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 71e90dc6..0cb8d15 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -694,6 +694,8 @@
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw);
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key,
+ u32 *ir_raw);
void em28xx_register_snapshot_button(struct em28xx *dev);
void em28xx_deregister_snapshot_button(struct em28xx *dev);
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 094e21d..da18d69 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -331,6 +331,7 @@
ir_codes = &ir_codes_pv951_table;
break;
case 0x18:
+ case 0x1f:
case 0x1a:
name = "Hauppauge";
ir->get_key = get_key_haup;