| /* |
| * BCM2835 master mode driver |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #define BCM2835_I2C_C 0x0 |
| #define BCM2835_I2C_S 0x4 |
| #define BCM2835_I2C_DLEN 0x8 |
| #define BCM2835_I2C_A 0xc |
| #define BCM2835_I2C_FIFO 0x10 |
| #define BCM2835_I2C_DIV 0x14 |
| #define BCM2835_I2C_DEL 0x18 |
| #define BCM2835_I2C_CLKT 0x1c |
| |
| #define BCM2835_I2C_C_READ BIT(0) |
| #define BCM2835_I2C_C_CLEAR BIT(4) /* bits 4 and 5 both clear */ |
| #define BCM2835_I2C_C_ST BIT(7) |
| #define BCM2835_I2C_C_INTD BIT(8) |
| #define BCM2835_I2C_C_INTT BIT(9) |
| #define BCM2835_I2C_C_INTR BIT(10) |
| #define BCM2835_I2C_C_I2CEN BIT(15) |
| |
| #define BCM2835_I2C_S_TA BIT(0) |
| #define BCM2835_I2C_S_DONE BIT(1) |
| #define BCM2835_I2C_S_TXW BIT(2) |
| #define BCM2835_I2C_S_RXR BIT(3) |
| #define BCM2835_I2C_S_TXD BIT(4) |
| #define BCM2835_I2C_S_RXD BIT(5) |
| #define BCM2835_I2C_S_TXE BIT(6) |
| #define BCM2835_I2C_S_RXF BIT(7) |
| #define BCM2835_I2C_S_ERR BIT(8) |
| #define BCM2835_I2C_S_CLKT BIT(9) |
| #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */ |
| |
| #define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000)) |
| |
| struct bcm2835_i2c_dev { |
| struct device *dev; |
| void __iomem *regs; |
| struct clk *clk; |
| int irq; |
| struct i2c_adapter adapter; |
| struct completion completion; |
| u32 msg_err; |
| u8 *msg_buf; |
| size_t msg_buf_remaining; |
| }; |
| |
| static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev, |
| u32 reg, u32 val) |
| { |
| writel(val, i2c_dev->regs + reg); |
| } |
| |
| static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg) |
| { |
| return readl(i2c_dev->regs + reg); |
| } |
| |
| static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) |
| { |
| u32 val; |
| |
| while (i2c_dev->msg_buf_remaining) { |
| val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); |
| if (!(val & BCM2835_I2C_S_TXD)) |
| break; |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_FIFO, |
| *i2c_dev->msg_buf); |
| i2c_dev->msg_buf++; |
| i2c_dev->msg_buf_remaining--; |
| } |
| } |
| |
| static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev) |
| { |
| u32 val; |
| |
| while (i2c_dev->msg_buf_remaining) { |
| val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); |
| if (!(val & BCM2835_I2C_S_RXD)) |
| break; |
| *i2c_dev->msg_buf = bcm2835_i2c_readl(i2c_dev, |
| BCM2835_I2C_FIFO); |
| i2c_dev->msg_buf++; |
| i2c_dev->msg_buf_remaining--; |
| } |
| } |
| |
| static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) |
| { |
| struct bcm2835_i2c_dev *i2c_dev = data; |
| u32 val, err; |
| |
| val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val); |
| |
| err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); |
| if (err) { |
| i2c_dev->msg_err = err; |
| complete(&i2c_dev->completion); |
| return IRQ_HANDLED; |
| } |
| |
| if (val & BCM2835_I2C_S_RXD) { |
| bcm2835_drain_rxfifo(i2c_dev); |
| if (!(val & BCM2835_I2C_S_DONE)) |
| return IRQ_HANDLED; |
| } |
| |
| if (val & BCM2835_I2C_S_DONE) { |
| if (i2c_dev->msg_buf_remaining) |
| i2c_dev->msg_err = BCM2835_I2C_S_LEN; |
| else |
| i2c_dev->msg_err = 0; |
| complete(&i2c_dev->completion); |
| return IRQ_HANDLED; |
| } |
| |
| if (val & BCM2835_I2C_S_TXD) { |
| bcm2835_fill_txfifo(i2c_dev); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, |
| struct i2c_msg *msg) |
| { |
| u32 c; |
| int time_left; |
| |
| i2c_dev->msg_buf = msg->buf; |
| i2c_dev->msg_buf_remaining = msg->len; |
| reinit_completion(&i2c_dev->completion); |
| |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); |
| |
| if (msg->flags & I2C_M_RD) { |
| c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; |
| } else { |
| c = BCM2835_I2C_C_INTT; |
| bcm2835_fill_txfifo(i2c_dev); |
| } |
| c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN; |
| |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); |
| |
| time_left = wait_for_completion_timeout(&i2c_dev->completion, |
| BCM2835_I2C_TIMEOUT); |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); |
| if (!time_left) { |
| dev_err(i2c_dev->dev, "i2c transfer timed out\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (likely(!i2c_dev->msg_err)) |
| return 0; |
| |
| if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) && |
| (msg->flags & I2C_M_IGNORE_NAK)) |
| return 0; |
| |
| dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); |
| |
| if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) |
| return -EREMOTEIO; |
| else |
| return -EIO; |
| } |
| |
| static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], |
| int num) |
| { |
| struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); |
| int i; |
| int ret = 0; |
| |
| for (i = 0; i < num; i++) { |
| ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]); |
| if (ret) |
| break; |
| } |
| |
| return ret ?: i; |
| } |
| |
| static u32 bcm2835_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm bcm2835_i2c_algo = { |
| .master_xfer = bcm2835_i2c_xfer, |
| .functionality = bcm2835_i2c_func, |
| }; |
| |
| static int bcm2835_i2c_probe(struct platform_device *pdev) |
| { |
| struct bcm2835_i2c_dev *i2c_dev; |
| struct resource *mem, *irq; |
| u32 bus_clk_rate, divider; |
| int ret; |
| struct i2c_adapter *adap; |
| |
| i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); |
| if (!i2c_dev) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, i2c_dev); |
| i2c_dev->dev = &pdev->dev; |
| init_completion(&i2c_dev->completion); |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| i2c_dev->regs = devm_ioremap_resource(&pdev->dev, mem); |
| if (IS_ERR(i2c_dev->regs)) |
| return PTR_ERR(i2c_dev->regs); |
| |
| i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(i2c_dev->clk)) { |
| dev_err(&pdev->dev, "Could not get clock\n"); |
| return PTR_ERR(i2c_dev->clk); |
| } |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", |
| &bus_clk_rate); |
| if (ret < 0) { |
| dev_warn(&pdev->dev, |
| "Could not read clock-frequency property\n"); |
| bus_clk_rate = 100000; |
| } |
| |
| divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate); |
| /* |
| * Per the datasheet, the register is always interpreted as an even |
| * number, by rounding down. In other words, the LSB is ignored. So, |
| * if the LSB is set, increment the divider to avoid any issue. |
| */ |
| if (divider & 1) |
| divider++; |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); |
| |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "No IRQ resource\n"); |
| return -ENODEV; |
| } |
| i2c_dev->irq = irq->start; |
| |
| ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED, |
| dev_name(&pdev->dev), i2c_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "Could not request IRQ\n"); |
| return -ENODEV; |
| } |
| |
| adap = &i2c_dev->adapter; |
| i2c_set_adapdata(adap, i2c_dev); |
| adap->owner = THIS_MODULE; |
| adap->class = I2C_CLASS_DEPRECATED; |
| strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name)); |
| adap->algo = &bcm2835_i2c_algo; |
| adap->dev.parent = &pdev->dev; |
| adap->dev.of_node = pdev->dev.of_node; |
| |
| bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0); |
| |
| ret = i2c_add_adapter(adap); |
| if (ret) |
| free_irq(i2c_dev->irq, i2c_dev); |
| |
| return ret; |
| } |
| |
| static int bcm2835_i2c_remove(struct platform_device *pdev) |
| { |
| struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev); |
| |
| free_irq(i2c_dev->irq, i2c_dev); |
| i2c_del_adapter(&i2c_dev->adapter); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id bcm2835_i2c_of_match[] = { |
| { .compatible = "brcm,bcm2835-i2c" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match); |
| |
| static struct platform_driver bcm2835_i2c_driver = { |
| .probe = bcm2835_i2c_probe, |
| .remove = bcm2835_i2c_remove, |
| .driver = { |
| .name = "i2c-bcm2835", |
| .owner = THIS_MODULE, |
| .of_match_table = bcm2835_i2c_of_match, |
| }, |
| }; |
| module_platform_driver(bcm2835_i2c_driver); |
| |
| MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>"); |
| MODULE_DESCRIPTION("BCM2835 I2C bus adapter"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:i2c-bcm2835"); |