[media] Rename all public generic RC functions from ir_ to rc_
Those functions are not InfraRed specific. So, rename them to properly
reflect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index b6ba3c7..d67573e 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1146,14 +1146,14 @@
bool is_release_code = false;
/* Look for the initial press of a button */
- keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+ keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
ictx->rc_toggle = 0x0;
ictx->rc_scancode = scancode;
/* Look for the release of a button */
if (keycode == KEY_RESERVED) {
release = scancode & ~0x4000;
- keycode = ir_g_keycode_from_table(ictx->rdev, release);
+ keycode = rc_g_keycode_from_table(ictx->rdev, release);
if (keycode != KEY_RESERVED)
is_release_code = true;
}
@@ -1182,7 +1182,7 @@
scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
ictx->rc_scancode = scancode;
- keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+ keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
/* not used in mce mode, but make sure we know its false */
ictx->release_code = false;
@@ -1564,9 +1564,9 @@
if (ktype != IMON_KEY_PANEL) {
if (press_type == 0)
- ir_keyup(ictx->rdev);
+ rc_keyup(ictx->rdev);
else {
- ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+ rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
spin_lock_irqsave(&ictx->kc_lock, flags);
ictx->last_keycode = ictx->kc;
spin_unlock_irqrestore(&ictx->kc_lock, flags);
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index cfe0e70..09c143f 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -139,12 +139,12 @@
scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
(bitrev8((data->bits >> 0) & 0xff) << 0);
IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
- ir_keydown(dev, scancode, data->toggle);
+ rc_keydown(dev, scancode, data->toggle);
data->first = false;
data->old_bits = data->bits;
} else if (data->bits == data->old_bits) {
IR_dprintk(1, "JVC repeat\n");
- ir_repeat(dev);
+ rc_repeat(dev);
} else {
IR_dprintk(1, "JVC invalid repeat msg\n");
break;
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 8ff157a..235d774 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -88,7 +88,7 @@
data->state = STATE_BIT_PULSE;
return 0;
} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
- ir_repeat(dev);
+ rc_repeat(dev);
IR_dprintk(1, "Repeat last key\n");
data->state = STATE_TRAILER_PULSE;
return 0;
@@ -114,7 +114,7 @@
geq_margin(ev.duration,
NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
IR_dprintk(1, "Repeat last key\n");
- ir_repeat(dev);
+ rc_repeat(dev);
data->state = STATE_INACTIVE;
return 0;
@@ -178,7 +178,7 @@
if (data->is_nec_x)
data->necx_repeat = true;
- ir_keydown(dev, scancode, 0);
+ rc_keydown(dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index dae6f9a..779ab0d0 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -150,7 +150,7 @@
scancode, toggle);
}
- ir_keydown(dev, scancode, toggle);
+ rc_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index d8a53c0..5586bf2 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -114,7 +114,7 @@
IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
- ir_keydown(dev, scancode, toggle);
+ rc_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 2435bbd..88d9487 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -242,7 +242,7 @@
goto out;
}
- ir_keydown(dev, scancode, toggle);
+ rc_keydown(dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 3138520..5292b89 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -143,7 +143,7 @@
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
- ir_keydown(dev, scancode, 0);
+ rc_keydown(dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d91b62c..11e2703 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -481,7 +481,7 @@
}
/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * rc_g_keycode_from_table() - gets the keycode that corresponds to a scancode
* @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode to look for
* @return: the corresponding keycode, or KEY_RESERVED
@@ -490,7 +490,7 @@
* keycode. Normally it should not be used since drivers should have no
* interest in keycodes.
*/
-u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
{
struct ir_scancode_table *rc_tab = &dev->rc_tab;
unsigned int keycode;
@@ -511,7 +511,7 @@
return keycode;
}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
/**
* ir_do_keyup() - internal function to signal the release of a keypress
@@ -532,13 +532,13 @@
}
/**
- * ir_keyup() - signals the release of a keypress
+ * rc_keyup() - signals the release of a keypress
* @dev: the struct rc_dev descriptor of the device
*
* This routine is used to signal that a key has been released on the
* remote control.
*/
-void ir_keyup(struct rc_dev *dev)
+void rc_keyup(struct rc_dev *dev)
{
unsigned long flags;
@@ -546,7 +546,7 @@
ir_do_keyup(dev);
spin_unlock_irqrestore(&dev->keylock, flags);
}
-EXPORT_SYMBOL_GPL(ir_keyup);
+EXPORT_SYMBOL_GPL(rc_keyup);
/**
* ir_timer_keyup() - generates a keyup event after a timeout
@@ -577,14 +577,14 @@
}
/**
- * ir_repeat() - signals that a key is still pressed
+ * rc_repeat() - signals that a key is still pressed
* @dev: the struct rc_dev descriptor of the device
*
* This routine is used by IR decoders when a repeat message which does
* not include the necessary bits to reproduce the scancode has been
* received.
*/
-void ir_repeat(struct rc_dev *dev)
+void rc_repeat(struct rc_dev *dev)
{
unsigned long flags;
@@ -601,7 +601,7 @@
out:
spin_unlock_irqrestore(&dev->keylock, flags);
}
-EXPORT_SYMBOL_GPL(ir_repeat);
+EXPORT_SYMBOL_GPL(rc_repeat);
/**
* ir_do_keydown() - internal function to process a keypress
@@ -643,7 +643,7 @@
}
/**
- * ir_keydown() - generates input event for a key press
+ * rc_keydown() - generates input event for a key press
* @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode that we're seeking
* @toggle: the toggle value (protocol dependent, if the protocol doesn't
@@ -652,10 +652,10 @@
* This routine is used to signal that a key has been pressed on the
* remote control.
*/
-void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
{
unsigned long flags;
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
+ u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
ir_do_keydown(dev, scancode, keycode, toggle);
@@ -666,10 +666,10 @@
}
spin_unlock_irqrestore(&dev->keylock, flags);
}
-EXPORT_SYMBOL_GPL(ir_keydown);
+EXPORT_SYMBOL_GPL(rc_keydown);
/**
- * ir_keydown_notimeout() - generates input event for a key press without
+ * rc_keydown_notimeout() - generates input event for a key press without
* an automatic keyup event at a later time
* @dev: the struct rc_dev descriptor of the device
* @scancode: the scancode that we're seeking
@@ -677,18 +677,18 @@
* support toggle values, this should be set to zero)
*
* This routine is used to signal that a key has been pressed on the
- * remote control. The driver must manually call ir_keyup() at a later stage.
+ * remote control. The driver must manually call rc_keyup() at a later stage.
*/
-void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
{
unsigned long flags;
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
+ u32 keycode = rc_g_keycode_from_table(dev, scancode);
spin_lock_irqsave(&dev->keylock, flags);
ir_do_keydown(dev, scancode, keycode, toggle);
spin_unlock_irqrestore(&dev->keylock, flags);
}
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
static int ir_open(struct input_dev *idev)
{