iio: proximity: add support for PulsedLight LIDAR
Add support for the PulsedLight LIDAR rangefinder sensor which allows
high speed (over 300Hz) distance measurements using Barker Coding within
40 meter range.
Support only tested on the "blue label" rev 2, but may work using low
sample frequencies on the original version.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
new file mode 100644
index 0000000..185a7ab
--- /dev/null
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -0,0 +1,288 @@
+/*
+ * pulsedlight-lidar-lite-v2.c - Support for PulsedLight LIDAR sensor
+ *
+ * Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * TODO: runtime pm, interrupt mode, and signal strength reporting
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define LIDAR_REG_CONTROL 0x00
+#define LIDAR_REG_CONTROL_ACQUIRE BIT(2)
+
+#define LIDAR_REG_STATUS 0x01
+#define LIDAR_REG_STATUS_INVALID BIT(3)
+#define LIDAR_REG_STATUS_READY BIT(0)
+
+#define LIDAR_REG_DATA_HBYTE 0x0f
+#define LIDAR_REG_DATA_LBYTE 0x10
+
+#define LIDAR_DRV_NAME "lidar"
+
+struct lidar_data {
+ struct iio_dev *indio_dev;
+ struct i2c_client *client;
+
+ u16 buffer[8]; /* 2 byte distance + 8 byte timestamp */
+};
+
+static const struct iio_chan_spec lidar_channels[] = {
+ {
+ .type = IIO_DISTANCE,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int lidar_read_byte(struct lidar_data *data, int reg)
+{
+ struct i2c_client *client = data->client;
+ int ret;
+
+ /*
+ * Device needs a STOP condition between address write, and data read
+ * so in turn i2c_smbus_read_byte_data cannot be used
+ */
+
+ ret = i2c_smbus_write_byte(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "cannot write addr value");
+ return ret;
+ }
+
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0)
+ dev_err(&client->dev, "cannot read data value");
+
+ return ret;
+}
+
+static inline int lidar_write_control(struct lidar_data *data, int val)
+{
+ return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val);
+}
+
+static int lidar_read_measurement(struct lidar_data *data, u16 *reg)
+{
+ int ret;
+ int val;
+
+ ret = lidar_read_byte(data, LIDAR_REG_DATA_HBYTE);
+ if (ret < 0)
+ return ret;
+ val = ret << 8;
+
+ ret = lidar_read_byte(data, LIDAR_REG_DATA_LBYTE);
+ if (ret < 0)
+ return ret;
+
+ val |= ret;
+ *reg = val;
+
+ return 0;
+}
+
+static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
+{
+ struct i2c_client *client = data->client;
+ int tries = 10;
+ int ret;
+
+ /* start sample */
+ ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
+ if (ret < 0) {
+ dev_err(&client->dev, "cannot send start measurement command");
+ return ret;
+ }
+
+ while (tries--) {
+ usleep_range(1000, 2000);
+
+ ret = lidar_read_byte(data, LIDAR_REG_STATUS);
+ if (ret < 0)
+ break;
+
+ /* return 0 since laser is likely pointed out of range */
+ if (ret & LIDAR_REG_STATUS_INVALID) {
+ *reg = 0;
+ ret = 0;
+ break;
+ }
+
+ /* sample ready to read */
+ if (!(ret & LIDAR_REG_STATUS_READY)) {
+ ret = lidar_read_measurement(data, reg);
+ break;
+ }
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int lidar_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct lidar_data *data = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&indio_dev->mlock);
+
+ if (iio_buffer_enabled(indio_dev) && mask == IIO_CHAN_INFO_RAW) {
+ ret = -EBUSY;
+ goto error_busy;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW: {
+ u16 reg;
+
+ ret = lidar_get_measurement(data, ®);
+ if (!ret) {
+ *val = reg;
+ ret = IIO_VAL_INT;
+ }
+ break;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = 10000;
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ break;
+ }
+
+error_busy:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static irqreturn_t lidar_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct lidar_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = lidar_get_measurement(data, data->buffer);
+ if (!ret) {
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_get_time_ns());
+ } else {
+ dev_err(&data->client->dev, "cannot read LIDAR measurement");
+ }
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_info lidar_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = lidar_read_raw,
+};
+
+static int lidar_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lidar_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ indio_dev->info = &lidar_info;
+ indio_dev->name = LIDAR_DRV_NAME;
+ indio_dev->channels = lidar_channels;
+ indio_dev->num_channels = ARRAY_SIZE(lidar_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+
+ data->client = client;
+ data->indio_dev = indio_dev;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ lidar_trigger_handler, NULL);
+ if (ret)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_unreg_buffer;
+
+ return 0;
+
+error_unreg_buffer:
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ return ret;
+}
+
+static int lidar_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id lidar_id[] = {
+ {"lidar-lite-v2", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, lidar_id);
+
+static const struct of_device_id lidar_dt_ids[] = {
+ { .compatible = "pulsedlight,lidar-lite-v2" },
+ { }
+};
+
+static struct i2c_driver lidar_driver = {
+ .driver = {
+ .name = LIDAR_DRV_NAME,
+ .of_match_table = of_match_ptr(lidar_dt_ids),
+ },
+ .probe = lidar_probe,
+ .remove = lidar_remove,
+ .id_table = lidar_id,
+};
+module_i2c_driver(lidar_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
+MODULE_DESCRIPTION("PulsedLight LIDAR sensor");
+MODULE_LICENSE("GPL");