Merge tag 'imx-clk-dt-lookup' into imx/dt-for-3.7-2
Conflicts:
arch/arm/boot/dts/imx6q.dtsi
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d6e18f..1a01ffa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,7 +273,7 @@
select ARM_AMBA
select ARCH_HAS_CPUFREQ
select COMMON_CLK
- select CLK_VERSATILE
+ select COMMON_CLK_VERSATILE
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
@@ -289,13 +289,12 @@
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
@@ -413,7 +412,7 @@
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index 2b0ff60..777caa3 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -23,10 +23,6 @@
soc {
aipi@10000000 { /* aipi */
- wdog@10002000 {
- status = "okay";
- };
-
serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 5303ab6..3e54f14 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -62,7 +62,6 @@
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x4000>;
interrupts = <27>;
- status = "disabled";
};
uart1: serial@1000a000 {
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index cd86177..6f4c80e 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,23 +25,31 @@
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
fsl,cd-internal;
fsl,wp-internal;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
uart3: serial@7000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@70010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
@@ -169,31 +177,43 @@
};
};
- wdog@73f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@73fa8000 {
- compatible = "fsl,imx51-iomuxc-babbage";
- reg = <0x73fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
+ 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
+ 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
+ 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
+ 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
+ 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+ 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+ >;
+ };
+ };
};
uart1: serial@73fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
fsl,uart-has-rtscts;
status = "okay";
};
uart2: serial@73fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@80000000 { /* aips-2 */
- sdma@83fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
- };
-
i2c@83fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
};
audmux@83fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@83fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "mii";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index aba28dc..2f71a91 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -130,6 +130,34 @@
};
};
+ usb@73f80000 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@73f80200 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@73f80400 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@73f80600 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f84000 0x4000>;
@@ -174,7 +202,6 @@
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@73f9c000 { /* WDOG2 */
@@ -184,6 +211,122 @@
status = "disabled";
};
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc";
+ reg = <0x73fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+ 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+ 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+ 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */
+ 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+ 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+ 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+ 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */
+ 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */
+ 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */
+ 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+ 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+ 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+ 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+ 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */
+ 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+ 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+ 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+ 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+ 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+ 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */
+ 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */
+ 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+ 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+ 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+ 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */
+ 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */
+ 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+ 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+ 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+ 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */
+ 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */
+ 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */
+ 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */
+ 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */
+ 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */
+ 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */
+ 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */
+ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
@@ -219,6 +362,7 @@
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
cspi@83fc0000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index da895e9..4be76f2 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -25,31 +25,66 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-ard";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
+ 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
+ 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
+ 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
+ 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+ 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+ 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+ 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+ 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+ 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+ 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+ 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+ 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+ 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+ 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+ 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+ 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+ 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+ 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+ 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+ 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+ 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+ 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+ 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+ 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+ 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+ 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+ 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+ 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+ 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+ 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+ 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+ 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+ 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
};
-
- aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
- };
};
eim-cs1@f4000000 {
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 9c79803..a124d1e 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -25,12 +25,16 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -56,32 +60,45 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-evk";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
@@ -96,6 +113,8 @@
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 2d803a9..08948af 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -25,6 +25,8 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
@@ -35,32 +37,46 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-qsb";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+ 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
};
audmux@63fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 0809102..06c6858 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -25,22 +25,30 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
esdhc@50008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
uart3: serial@5000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -72,35 +80,49 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-smd";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
uart2: serial@53fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd37165..221cf33 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -135,6 +135,34 @@
};
};
+ usb@53f80000 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@53f80200 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@53f80400 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@53f80600 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
@@ -179,7 +207,6 @@
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@53f9c000 { /* WDOG2 */
@@ -189,6 +216,161 @@
status = "disabled";
};
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+ 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+ 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+ 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
+ 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
+ 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+ 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+ 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+ 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+ 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+ 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+ 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+ 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+ 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
+ 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+
+ pinctrl_esdhc1_2: esdhc1grp-2 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+ 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+ 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+ 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+ 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+ 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+ 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+ 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+ 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+ >;
+ };
+ };
+
+ esdhc3 {
+ pinctrl_esdhc3_1: esdhc3grp-1 {
+ fsl,pins = <
+ 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+ 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+ 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+ 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+ 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+ 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+ 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+ 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+ 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+ 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+ 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
+ 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+ 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+ >;
+ };
+
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+ 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+ 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+ 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+ 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
+ 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
@@ -203,6 +385,20 @@
status = "disabled";
};
+ can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ status = "disabled";
+ };
+
+ can2: can@53fcc000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <83>;
+ status = "disabled";
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
@@ -277,6 +473,7 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi@63fc0000 {
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d792581..15df4c1 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -28,8 +28,27 @@
status = "disabled"; /* gpmi nand conflicts with SD */
};
+ aips-bus@02000000 { /* AIPS1 */
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+ >;
+ };
+ };
+ };
+ };
+
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
@@ -52,6 +71,8 @@
};
uart4: serial@021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index cfdbe53..0fb29ca 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -46,15 +46,20 @@
iomuxc@020e0000 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_hog>;
+ pinctrl-0 = <&pinctrl_hog>;
- gpios {
- pinctrl_gpio_hog: gpiohog {
+ hog {
+ pinctrl_hog: hoggrp {
fsl,pins = <
- 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
- 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
- 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
- >;
+ 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+ 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+ 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+ 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+ >;
};
};
};
@@ -71,12 +76,16 @@
};
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
vmmc-supply = <®_3p3v>;
@@ -84,6 +93,8 @@
};
usdhc@0219c000 { /* uSDHC4 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_2>;
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
vmmc-supply = <®_3p3v>;
@@ -99,7 +110,7 @@
uart2: serial@021e8000 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2_1>;
+ pinctrl-0 = <&pinctrl_uart2_1>;
};
i2c@021a0000 { /* I2C1 */
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 07509a1..e596c28c 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -22,28 +22,51 @@
};
soc {
-
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
uart1: serial@02020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
+
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+ 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+ >;
+ };
+ };
+ };
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02194000 { /* uSDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_1>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 925da33..e45476d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -383,7 +383,6 @@
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
clocks = <&clks 0>;
- status = "disabled";
};
wdog@020c0000 { /* WDOG2 */
@@ -539,86 +538,199 @@
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
- fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
- 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
- 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
- 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
- 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
- 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
- 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
- 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
- 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
- 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
- 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
- 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
- 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
- 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
- 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
- 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
- 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
- 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
- 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
- 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
- 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
- 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
- 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
- };
- };
-
- serial2 {
- pinctrl_serial2_1: serial2grp-1 {
- fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
- 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
- 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
- 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
- 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
- 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
- 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
- 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
- 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
- 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
- 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
- };
- };
-
- usdhc4 {
- pinctrl_usdhc4_1: usdhc4grp-1 {
- fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
- 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
- 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
- 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
- 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
- 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
- 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
- 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
- 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
- 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ fsl,pins = <
+ 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+ 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ >;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
- 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
- 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ fsl,pins = <
+ 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+ 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+ 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+ 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+ 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
+ };
+
+ pinctrl_enet_2: enetgrp-2 {
+ fsl,pins = <
+ 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+ 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
+ };
+ };
+
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <
+ 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+ 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+ 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+ 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+ 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+ 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+ 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+ 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+ 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+ 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+ 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+ 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+ 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+ 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+ 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+ 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+ 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+ 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+ 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+ 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+ 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
+ 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ >;
+ };
+ };
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */
+ 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+ 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+ 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+ 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+ 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+ 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+ 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+ 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+ 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+ 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+ 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ >;
+ };
+
+ pinctrl_usdhc3_2: usdhc3grp-2 {
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ >;
+ };
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ >;
+ };
+
+ pinctrl_usdhc4_2: usdhc4grp-2 {
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ >;
};
};
};
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3c9f32f..565132d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,9 +32,7 @@
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_SMP=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index afd542a..7ca5fe4 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -101,13 +101,8 @@
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
-
-config SOC_IMX53
- bool
- select SOC_IMX5
- select ARCH_MX5
- select ARCH_MX53
- select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX51
if ARCH_IMX_V4_V5
@@ -561,7 +556,6 @@
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
- select USE_OF
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
@@ -737,95 +731,19 @@
endchoice
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
+comment "Device tree only"
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
+config SOC_IMX53
+ bool "i.MX53 support"
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
+ select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX53
+
help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+ This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
bool "i.MX6 Quad support"
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c22..58dc7c6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -83,16 +83,9 @@
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf..c609676 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -39,8 +39,12 @@
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
- imx53-qsb.dtb imx53-smd.dtb
+
+dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
+
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
deleted file mode 100644
index 77e0db9..0000000
--- a/arch/arm/mach-imx/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata) \
- imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
- imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h
deleted file mode 100644
index 014aa98..0000000
--- a/arch/arm/mach-imx/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index d4067fe..f233b4b 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -13,7 +13,6 @@
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
@@ -44,27 +43,8 @@
{ /* sentinel */ }
};
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
- { /* sentinel */ }
-};
-
static void __init imx51_dt_init(void)
{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx51_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
of_platform_populate(NULL, of_default_bus_match_table,
imx51_auxdata_lookup, NULL);
}
@@ -79,7 +59,6 @@
};
static const char *imx51_dt_board_compat[] __initdata = {
- "fsl,imx51-babbage",
"fsl,imx51",
NULL
};
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c
similarity index 81%
rename from arch/arm/mach-imx/imx53-dt.c
rename to arch/arm/mach-imx/mach-imx53.c
index 1b7a2fc..29711e9 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -17,7 +17,6 @@
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
@@ -51,14 +50,6 @@
{ /* sentinel */ }
};
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
- { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
- { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
- { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
- { /* sentinel */ }
-};
-
static void __init imx53_qsb_init(void)
{
struct clk *clk;
@@ -74,20 +65,6 @@
static void __init imx53_dt_init(void)
{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx53_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
if (of_machine_is_compatible("fsl,imx53-qsb"))
imx53_qsb_init();
@@ -105,10 +82,6 @@
};
static const char *imx53_dt_board_compat[] __initdata = {
- "fsl,imx53-ard",
- "fsl,imx53-evk",
- "fsl,imx53-qsb",
- "fsl,imx53-smd",
"fsl,imx53",
NULL
};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 0b30aa8..715029e 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -22,7 +22,6 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/anatop.h>
@@ -158,12 +157,6 @@
static void __init imx6q_init_machine(void)
{
- /*
- * This should be removed when all imx6q boards have pinctrl
- * states for devices defined in device tree.
- */
- pinctrl_provide_dummies();
-
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
imx6q_sabrelite_init();
@@ -217,9 +210,6 @@
};
static const char *imx6q_dt_compat[] __initdata = {
- "fsl,imx6q-arm2",
- "fsl,imx6q-sabrelite",
- "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
deleted file mode 100644
index 8d09c01..0000000
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
- /* board id */
- MX51_PAD_PCBID0,
- MX51_PAD_PCBID1,
- MX51_PAD_PCBID2,
-
- /* leds */
- MX51_PAD_CSI1_D9__GPIO3_13,
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
- MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
- /* power key */
- MX51_PAD_PWRKEY,
-
- /* reset */
- MX51_PAD_DI1_PIN13__GPIO3_2,
- MX51_PAD_GPIO1_4__GPIO1_4,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/* PCBID2 PCBID1 PCBID0 STATE
- 1 1 1 ER1:rev1.1
- 1 1 0 ER2:rev1.2
- 1 0 1 ER3:rev1.3
- 1 0 0 ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
- int id;
-
- /* things are taking time to settle */
- msleep(150);
-
- gpio_request(EFIKAMX_PCBID0, "pcbid0");
- gpio_direction_input(EFIKAMX_PCBID0);
- gpio_request(EFIKAMX_PCBID1, "pcbid1");
- gpio_direction_input(EFIKAMX_PCBID1);
- gpio_request(EFIKAMX_PCBID2, "pcbid2");
- gpio_direction_input(EFIKAMX_PCBID2);
-
- id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
- id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
- switch (id) {
- case 7:
- system_rev = 0x11;
- break;
- case 6:
- system_rev = 0x12;
- break;
- case 5:
- system_rev = 0x13;
- break;
- case 4:
- system_rev = 0x14;
- break;
- default:
- system_rev = 0x10;
- break;
- }
-
- if ((system_rev == 0x10)
- || (system_rev == 0x12)
- || (system_rev == 0x14)) {
- printk(KERN_WARNING
- "EfikaMX: Unsupported board revision 1.%u!\n",
- system_rev & 0xf);
- }
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
- {
- .name = "efikamx:green",
- .default_trigger = "default-on",
- .gpio = EFIKAMX_GREEN_LED,
- },
- {
- .name = "efikamx:red",
- .default_trigger = "ide-disk",
- .gpio = EFIKAMX_RED_LED,
- },
- {
- .name = "efikamx:blue",
- .default_trigger = "mmc0",
- .gpio = EFIKAMX_BLUE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikamx_leds_data __initconst = {
- .leds = mx51_efikamx_leds,
- .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKAMX_POWER_KEY,
- .type = EV_PWR,
- .desc = "Power Button (CM)",
- .wakeup = 1,
- .debounce_interval = 10, /* ms */
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
- .buttons = mx51_efikamx_powerkey,
- .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
- if (system_rev == 0x11)
- gpio_direction_output(EFIKAMX_RESET1_1, 0);
- else
- gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
- if (!IS_ERR(coincell))
- regulator_disable(coincell);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKAMX_POWEROFF, "poweroff");
- pm_power_off = mx51_efikamx_power_off;
-
- /* enable coincell charger. maybe need a small power driver ? */
- coincell = regulator_get(NULL, "coincell");
- if (!IS_ERR(coincell)) {
- regulator_set_voltage(coincell, 3000000, 3000000);
- regulator_enable(coincell);
- }
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikamx_init_late(void)
-{
- imx51_init_late();
- mx51_efikamx_power_init();
-}
-
-static void __init mx51_efikamx_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
- ARRAY_SIZE(mx51efikamx_pads));
- efika_board_common_init();
-
- mx51_efikamx_board_id();
-
- /* on < 1.2 boards both SD controllers are used */
- if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
- mx51_efikamx_leds[2].default_trigger = "mmc1";
- } else
- imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
- gpio_led_register_device(-1, &mx51_efikamx_leds_data);
- imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
- if (system_rev == 0x11) {
- gpio_request(EFIKAMX_RESET1_1, "reset");
- gpio_direction_output(EFIKAMX_RESET1_1, 1);
- } else {
- gpio_request(EFIKAMX_RESET, "reset");
- gpio_direction_output(EFIKAMX_RESET, 1);
- }
-
- /*
- * enable wifi by default only on mx
- * sb and mx have same wlan pin but the value to enable it are
- * different :/
- */
- gpio_request(EFIKA_WLAN_EN, "wlan_en");
- gpio_direction_output(EFIKA_WLAN_EN, 0);
- msleep(10);
-
- gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
- gpio_direction_output(EFIKA_WLAN_RESET, 0);
- msleep(10);
- gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
- .init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_efikamx_timer,
- .init_machine = mx51_efikamx_init,
- .init_late = mx51_efikamx_init_late,
- .restart = mx51_efikamx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
deleted file mode 100644
index fdbd181..0000000
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
- /* USB HOST2 */
- MX51_PAD_EIM_D16__USBH2_DATA0,
- MX51_PAD_EIM_D17__USBH2_DATA1,
- MX51_PAD_EIM_D18__USBH2_DATA2,
- MX51_PAD_EIM_D19__USBH2_DATA3,
- MX51_PAD_EIM_D20__USBH2_DATA4,
- MX51_PAD_EIM_D21__USBH2_DATA5,
- MX51_PAD_EIM_D22__USBH2_DATA6,
- MX51_PAD_EIM_D23__USBH2_DATA7,
- MX51_PAD_EIM_A24__USBH2_CLK,
- MX51_PAD_EIM_A25__USBH2_DIR,
- MX51_PAD_EIM_A26__USBH2_STP,
- MX51_PAD_EIM_A27__USBH2_NXT,
-
- /* leds */
- MX51_PAD_EIM_CS0__GPIO2_25,
- MX51_PAD_GPIO1_3__GPIO1_3,
-
- /* pcb id */
- MX51_PAD_EIM_CS3__GPIO2_28,
- MX51_PAD_EIM_CS4__GPIO2_29,
-
- /* lid */
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
- /* power key*/
- MX51_PAD_PWRKEY,
-
- /* wifi/bt button */
- MX51_PAD_DI1_PIN12__GPIO3_1,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
- /* wdog reset */
- MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
- /* BT */
- MX51_PAD_EIM_A17__GPIO2_11,
-
- MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
- iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
- mxc_iomux_v3_setup_pad(usbh2gpio);
- gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
- gpio_direction_output(EFIKASB_USBH2_STP, 0);
- msleep(1);
- gpio_set_value(EFIKASB_USBH2_STP, 1);
- msleep(1);
-
- gpio_free(EFIKASB_USBH2_STP);
- mxc_iomux_v3_setup_pad(usbh2stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
- .init = initialize_usbh2_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
- usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- if (usbh2_config.otg)
- imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
- {
- .name = "efikasb:green",
- .default_trigger = "default-on",
- .gpio = EFIKASB_GREEN_LED,
- .active_low = 1,
- },
- {
- .name = "efikasb:white",
- .default_trigger = "caps",
- .gpio = EFIKASB_WHITE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikasb_leds_data __initconst = {
- .leds = mx51_efikasb_leds,
- .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKASB_PWRKEY,
- .type = EV_KEY,
- .desc = "Power Button",
- .wakeup = 1,
- .active_low = 1,
- },
- {
- .code = SW_LID,
- .gpio = EFIKASB_LID,
- .type = EV_SW,
- .desc = "Lid Switch",
- .active_low = 1,
- },
- {
- .code = KEY_RFKILL,
- .gpio = EFIKASB_RFKILL,
- .type = EV_KEY,
- .desc = "rfkill",
- .active_low = 1,
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
- .buttons = mx51_efikasb_keys,
- .nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
- .cd_gpio = EFIKASB_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
- gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKASB_POWEROFF, "poweroff");
- pm_power_off = mx51_efikasb_power_off;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikasb_init_late(void)
-{
- imx51_init_late();
- mx51_efikasb_power_init();
-}
-
-/* 01 R1.3 board
- 10 R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
- int id;
-
- gpio_request(EFIKASB_PCBID0, "pcb id0");
- gpio_direction_input(EFIKASB_PCBID0);
- gpio_request(EFIKASB_PCBID1, "pcb id1");
- gpio_direction_input(EFIKASB_PCBID1);
-
- id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
- switch (id) {
- default:
- break;
- case 1:
- system_rev = 0x13;
- break;
- case 2:
- system_rev = 0x20;
- break;
- }
-}
-
-static void __init efikasb_board_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
- ARRAY_SIZE(mx51efikasb_pads));
- efika_board_common_init();
-
- mx51_efikasb_board_id();
- mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
- imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
- gpio_led_register_device(-1, &mx51_efikasb_leds_data);
- imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
- .init = mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_machine = efikasb_board_init,
- .init_late = mx51_efikasb_init_late,
- .timer = &mx51_efikasb_timer,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 6c28e65..0000000
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
-#define ARD_HOME IMX_GPIO_NR(5, 10)
-#define ARD_BACK IMX_GPIO_NR(5, 11)
-#define ARD_PROG IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
- /* UART1 */
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
- /* WEIM for CS1 */
- MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
- MX53_PAD_EIM_D16__EMI_WEIM_D_16,
- MX53_PAD_EIM_D17__EMI_WEIM_D_17,
- MX53_PAD_EIM_D18__EMI_WEIM_D_18,
- MX53_PAD_EIM_D19__EMI_WEIM_D_19,
- MX53_PAD_EIM_D20__EMI_WEIM_D_20,
- MX53_PAD_EIM_D21__EMI_WEIM_D_21,
- MX53_PAD_EIM_D22__EMI_WEIM_D_22,
- MX53_PAD_EIM_D23__EMI_WEIM_D_23,
- MX53_PAD_EIM_D24__EMI_WEIM_D_24,
- MX53_PAD_EIM_D25__EMI_WEIM_D_25,
- MX53_PAD_EIM_D26__EMI_WEIM_D_26,
- MX53_PAD_EIM_D27__EMI_WEIM_D_27,
- MX53_PAD_EIM_D28__EMI_WEIM_D_28,
- MX53_PAD_EIM_D29__EMI_WEIM_D_29,
- MX53_PAD_EIM_D30__EMI_WEIM_D_30,
- MX53_PAD_EIM_D31__EMI_WEIM_D_31,
- MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
- MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
- MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
- MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
- MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
- MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
- MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
- MX53_PAD_EIM_OE__EMI_WEIM_OE,
- MX53_PAD_EIM_RW__EMI_WEIM_RW,
- MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
- /* SDHC1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
- MX53_PAD_GPIO_1__GPIO1_1,
- MX53_PAD_GPIO_9__GPIO1_9,
- /* I2C2 */
- MX53_PAD_EIM_EB2__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* I2C3 */
- MX53_PAD_GPIO_3__I2C3_SCL,
- MX53_PAD_GPIO_16__I2C3_SDA,
- /* GPIO */
- MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
- MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
- MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
- MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
- MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button ard_buttons[] = {
- GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
- GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
- GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
- GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
- .buttons = ard_buttons,
- .nbuttons = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
- {
- .start = MX53_CS1_64MB_BASE_ADDR,
- .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
- .resource = ard_smsc911x_resources,
- .dev = {
- .platform_data = &ard_smsc911x_config,
- },
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
- .cd_gpio = ARD_SD1_CD,
- .wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
- .bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
- .bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
- gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
- gpio_direction_input(ARD_ETHERNET_INT_B);
-
- gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
- gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
- u32 reg;
- void __iomem *weim_base, *iomuxc_base;
-
- weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
- if (!weim_base)
- return -ENOMEM;
-
- iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
- if (!iomuxc_base) {
- iounmap(weim_base);
- return -ENOMEM;
- }
-
- /* CS1 timings for LAN9220 */
- writel(0x20001, (weim_base + 0x18));
- writel(0x0, (weim_base + 0x1C));
- writel(0x16000202, (weim_base + 0x20));
- writel(0x00000002, (weim_base + 0x24));
- writel(0x16002082, (weim_base + 0x28));
- writel(0x00000000, (weim_base + 0x2C));
- writel(0x00000000, (weim_base + 0x90));
-
- /* specify 64 MB on CS1 and CS0 on GPR1 */
- reg = readl(iomuxc_base + 0x4);
- reg &= ~0x3F;
- reg |= 0x1B;
- writel(reg, (iomuxc_base + 0x4));
-
- iounmap(iomuxc_base);
- iounmap(weim_base);
-
- return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
- weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
- &ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
- imx53_soc_init();
- imx53_add_imx_uart(0, NULL);
-
- imx53_ard_common_init();
- mx53_ard_io_init();
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
- ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
- imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
- imx_add_gpio_keys(&ard_button_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
- .init = mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_ard_timer,
- .init_machine = mx53_ard_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 09fe219..0000000
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- MX53_PAD_PATA_DIOR__UART2_RTS,
- MX53_PAD_PATA_INTRQ__UART2_CTS,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
- MX53_PAD_EIM_D16__ECSPI1_SCLK,
- MX53_PAD_EIM_D17__ECSPI1_MISO,
- MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
- /* ecspi chip select lines */
- MX53_PAD_EIM_EB2__GPIO2_30,
- MX53_PAD_EIM_D19__GPIO3_19,
- /* LED */
- MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = MX53EVK_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
- .leds = mx53evk_leds,
- .num_leds = ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
- imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
- "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx53_evk_spi_cs[] = {
- EVK_ECSPI1_CS0,
- EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
- .chipselect = mx53_evk_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
- imx53_soc_init();
- imx53_evk_common_init();
-
- mx53_evk_init_uart();
- mx53_evk_fec_reset();
- imx53_add_fec(&mx53_evk_fec_pdata);
-
- imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
- imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
-
- spi_register_board_info(mx53_evk_spi_board_info,
- ARRAY_SIZE(mx53_evk_spi_board_info));
- imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0);
- gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
- .init = mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_evk_timer,
- .init_machine = mx53_evk_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 8abe23c..0000000
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define LOCO_LED IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
- /* FEC */
- MX53_PAD_FEC_MDC__FEC_MDC,
- MX53_PAD_FEC_MDIO__FEC_MDIO,
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- MX53_PAD_FEC_TX_EN__FEC_TX_EN,
- MX53_PAD_FEC_TXD1__FEC_TDATA_1,
- MX53_PAD_FEC_TXD0__FEC_TDATA_0,
- /* FEC_nRST */
- MX53_PAD_PATA_DA_0__GPIO7_6,
- /* FEC_nINT */
- MX53_PAD_PATA_DATA4__GPIO2_4,
- /* AUDMUX5 */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
- /* I2C2 */
- MX53_PAD_KEY_COL3__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1_CD */
- MX53_PAD_EIM_DA13__GPIO3_13,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- /* SD3_CD */
- MX53_PAD_EIM_DA11__GPIO3_11,
- /* SD3_WP */
- MX53_PAD_EIM_DA12__GPIO3_12,
- /* VGA */
- MX53_PAD_EIM_OE__IPU_DI1_PIN7,
- MX53_PAD_EIM_RW__IPU_DI1_PIN8,
- /* DISPLB */
- MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
- MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
- MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
- MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
- /* DISP0_POWER_EN */
- MX53_PAD_EIM_D24__GPIO3_24,
- /* DISP0 DET INT */
- MX53_PAD_EIM_D31__GPIO3_31,
- /* LVDS */
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* UART1 */
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
- /* CSI0 */
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
- /* DISPLAY */
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
- /* Audio CLK*/
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
- /* PWM */
- MX53_PAD_GPIO_1__PWM2_PWMO,
- /* SPDIF */
- MX53_PAD_GPIO_7__SPDIF_PLOCK,
- MX53_PAD_GPIO_17__SPDIF_OUT1,
- /* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
- MX53_PAD_PATA_DA_2__GPIO7_8,
- MX53_PAD_PATA_DATA5__GPIO2_5,
- MX53_PAD_PATA_DATA6__GPIO2_6,
- MX53_PAD_PATA_DATA14__GPIO2_14,
- MX53_PAD_PATA_DATA15__GPIO2_15,
- MX53_PAD_PATA_INTRQ__GPIO7_2,
- MX53_PAD_EIM_WAIT__GPIO5_0,
- MX53_PAD_NANDF_WP_B__GPIO6_9,
- MX53_PAD_NANDF_RB0__GPIO6_10,
- MX53_PAD_NANDF_CS1__GPIO6_14,
- MX53_PAD_NANDF_CS2__GPIO6_15,
- MX53_PAD_NANDF_CS3__GPIO6_16,
- MX53_PAD_GPIO_5__GPIO1_5,
- MX53_PAD_GPIO_16__GPIO7_11,
- MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button loco_buttons[] = {
- GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
- GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
- .buttons = loco_buttons,
- .nbuttons = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
- .cd_gpio = LOCO_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
- .cd_gpio = LOCO_SD3_CD,
- .wp_gpio = LOCO_SD3_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(LOCO_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = LOCO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
- .leds = mx53loco_leds,
- .num_leds = ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
- {
- I2C_BOARD_INFO("mma8450", 0x1C),
- },
-};
-
-static void __init mx53_loco_board_init(void)
-{
- int ret;
- imx53_soc_init();
- imx53_qsb_common_init();
-
- imx53_add_imx_uart(0, NULL);
- mx53_loco_fec_reset();
- imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0);
-
- ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
- if (ret)
- pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
- i2c_register_board_info(0, mx53loco_i2c_devices,
- ARRAY_SIZE(mx53loco_i2c_devices));
- imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
- imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
- imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
- imx_add_gpio_keys(&loco_button_data);
- gpio_led_register_device(-1, &mx53loco_leds_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
- .init = mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_loco_timer,
- .init_machine = mx53_loco_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index b15d6a6d..0000000
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
- MX53_PAD_PATA_DA_1__UART3_CTS,
- MX53_PAD_PATA_DA_2__UART3_RTS,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD2 */
- MX53_PAD_SD2_CMD__ESDHC2_CMD,
- MX53_PAD_SD2_CLK__ESDHC2_CLK,
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, NULL);
- imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
- int ret;
-
- /* Enable SATA PWR */
- ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
- GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
- if (ret) {
- pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
- return;
- }
-}
-
-void __init imx53_smd_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
- imx53_soc_init();
- imx53_smd_common_init();
-
- mx53_smd_init_uart();
- mx53_smd_fec_reset();
- imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
- mx53_smd_ahci_pwr_on();
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
- .init = mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_smd_timer,
- .init_machine = mx53_smd_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 52d8f53..acb0aad 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -128,25 +128,6 @@
.script_addrs = &imx51_sdma_script,
};
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .app_2_mcu_addr = 683,
- .mcu_2_app_addr = 747,
- .uart_2_mcu_addr = 817,
- .shp_2_mcu_addr = 891,
- .mcu_2_shp_addr = 960,
- .uartsh_2_mcu_addr = 1032,
- .spdif_2_mcu_addr = 1100,
- .mcu_2_spdif_addr = 1134,
- .firi_2_mcu_addr = 1193,
- .mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
- .fw_name = "sdma-imx53.bin",
- .script_addrs = &imx53_sdma_script,
-};
-
static const struct resource imx50_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
};
@@ -155,10 +136,6 @@
DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
};
-static const struct resource imx53_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx35 type gpio */
@@ -196,30 +173,6 @@
ARRAY_SIZE(imx51_audmux_res));
}
-void __init imx53_soc_init(void)
-{
- /* i.mx53 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
- mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
- mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
- mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
- pinctrl_provide_dummies();
- /* i.mx53 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
- /* i.mx53 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
- ARRAY_SIZE(imx53_audmux_res));
-}
-
void __init imx51_init_late(void)
{
mx51_neon_fixup();
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
deleted file mode 100644
index ee870c4..0000000
--- a/arch/arm/mach-imx/mx51_efika.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-
-#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
-
- /* SD/MMC WP/CD */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
- MX51_PAD_GPIO1_7__SD2_WP,
- MX51_PAD_GPIO1_8__SD2_CD,
-
- /* spi */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
- MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB RESET */
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* WLAN */
- MX51_PAD_EIM_A22__GPIO2_16,
- MX51_PAD_EIM_A16__GPIO2_10,
-
- /* USB PHY RESET */
- MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- u32 v;
- void __iomem *usb_base;
- void __iomem *socregs_base;
-
- mxc_iomux_v3_setup_pad(usbh1gpio);
- gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
- gpio_direction_output(EFIKAMX_USBH1_STP, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USBH1_STP, 1);
- msleep(1);
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* The clock for the USBH1 ULPI port will come externally */
- /* from the PHY. */
- v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- socregs_base + MX51_USB_CTRL_1_OFFSET);
-
- iounmap(usb_base);
-
- gpio_free(EFIKAMX_USBH1_STP);
- mxc_iomux_v3_setup_pad(usbh1stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
- gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
- gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
- mx51_efika_hubreset();
-
- /* pulling it low, means no USB at all... */
- gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
- gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
- usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- if (usbh1_config.otg)
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- },
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
- .name = "spi_flash",
- .parts = mx51_efika_spi_nor_partitions,
- .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
- .type = "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "1-000a"),
- REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
- {
- .supply = "pwgt1",
- }
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
- {
- .supply = "pwgt2",
- }
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
- {
- .supply = "coincell",
- }
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 850000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .min_uV = 900000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 950000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data swbst_init = {
- .constraints = {
- .name = "SWBST",
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
- .consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .min_uV = 2400000,
- .max_uV = 2775000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .min_uV = 2775000,
- .max_uV = 2775000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
- .consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
- .constraints = {
- .name = "VAUDIO",
- .min_uV = 2300000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vsd_init = {
- .constraints = {
- .name = "VSD",
- .min_uV = 1800000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
- .consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- .min_uV = 1800000,
- .max_uV = 2900000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data gpo1_init = {
- .constraints = {
- .name = "GPO1",
- }
-};
-
-static struct regulator_init_data gpo2_init = {
- .constraints = {
- .name = "GPO2",
- }
-};
-
-static struct regulator_init_data gpo3_init = {
- .constraints = {
- .name = "GPO3",
- }
-};
-
-static struct regulator_init_data gpo4_init = {
- .constraints = {
- .name = "GPO4",
- }
-};
-
-static struct regulator_init_data pwgt1_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
- .consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
- .consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
- .constraints = {
- .name = "COINCELL",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
- .consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_SWBST, .init_data = &swbst_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VSD, .init_data = &vsd_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
- { .id = MC13892_GPO1, .init_data = &gpo1_init },
- { .id = MC13892_GPO2, .init_data = &gpo2_init },
- { .id = MC13892_GPO3, .init_data = &gpo3_init },
- { .id = MC13892_GPO4, .init_data = &gpo4_init },
- { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
- { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
- { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
- .regulators = mx51_efika_regulators,
- },
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &mx51_efika_spi_flash_data,
- .irq = -1,
- },
- {
- .modalias = "mc13892",
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &mx51_efika_mc13892_data,
- /* irq number is run-time assigned */
- },
-};
-
-static int mx51_efika_spi_cs[] = {
- EFIKAMX_SPI_CS0,
- EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
- .chipselect = mx51_efika_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
- ARRAY_SIZE(mx51efika_pads));
- imx51_add_imx_uart(0, &uart_pdata);
- mx51_efika_usb();
-
- /* FIXME: comes from original code. check this. */
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- sw2_init.constraints.state_mem.uV = 1100000;
- else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
- sw2_init.constraints.state_mem.uV = 1250000;
- sw1_init.constraints.state_mem.uV = 1000000;
- }
- if (machine_is_mx51_efikasb())
- vgen1_init.constraints.max_uV = 1200000;
-
- gpio_request(EFIKAMX_PMIC, "pmic irq");
- gpio_direction_input(EFIKAMX_PMIC);
- mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
- spi_register_board_info(mx51_efika_spi_board_info,
- ARRAY_SIZE(mx51_efika_spi_board_info));
- imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
- imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 7fddd01..d697d07 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -108,18 +108,21 @@
config CPU_PXA168
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
+ select COMMON_CLK
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 13dd160..841847d 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -1,6 +1,5 @@
obj-y := timer.o
obj-y += irq.o
-obj-y += clock.o
obj-y += rstc.o
obj-y += prima2.o
obj-y += rtciobrg.o
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
deleted file mode 100644
index aebad7e..0000000
--- a/arch/arm/mach-prima2/clock.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * Clock tree for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-
-#define SIRFSOC_CLKC_CLK_EN0 0x0000
-#define SIRFSOC_CLKC_CLK_EN1 0x0004
-#define SIRFSOC_CLKC_REF_CFG 0x0014
-#define SIRFSOC_CLKC_CPU_CFG 0x0018
-#define SIRFSOC_CLKC_MEM_CFG 0x001c
-#define SIRFSOC_CLKC_SYS_CFG 0x0020
-#define SIRFSOC_CLKC_IO_CFG 0x0024
-#define SIRFSOC_CLKC_DSP_CFG 0x0028
-#define SIRFSOC_CLKC_GFX_CFG 0x002c
-#define SIRFSOC_CLKC_MM_CFG 0x0030
-#define SIRFSOC_LKC_LCD_CFG 0x0034
-#define SIRFSOC_CLKC_MMC_CFG 0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
-
-#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000)
-
-#define KHZ 1000
-#define MHZ (KHZ * KHZ)
-
-struct clk_ops {
- unsigned long (*get_rate)(struct clk *clk);
- long (*round_rate)(struct clk *clk, unsigned long rate);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*enable)(struct clk *clk);
- int (*disable)(struct clk *clk);
- struct clk *(*get_parent)(struct clk *clk);
- int (*set_parent)(struct clk *clk, struct clk *parent);
-};
-
-struct clk {
- struct clk *parent; /* parent clk */
- unsigned long rate; /* clock rate in Hz */
- signed char usage; /* clock enable count */
- signed char enable_bit; /* enable bit: 0 ~ 63 */
- unsigned short regofs; /* register offset */
- struct clk_ops *ops; /* clock operation */
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static inline unsigned long clkc_readl(unsigned reg)
-{
- return readl(SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-static inline void clkc_writel(u32 val, unsigned reg)
-{
- writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-/*
- * osc_rtc - real time oscillator - 32.768KHz
- * osc_sys - high speed oscillator - 26MHz
- */
-
-static struct clk clk_rtc = {
- .rate = 32768,
-};
-
-static struct clk clk_osc = {
- .rate = 26 * MHZ,
-};
-
-/*
- * std pll
- */
-static unsigned long std_pll_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
- SIRFSOC_CLKC_PLL1_CFG0;
-
- if (clkc_readl(regcfg2) & BIT(2)) {
- /* pll bypass mode */
- clk->rate = fin;
- } else {
- /* fout = fin * nf / nr / od */
- u32 cfg0 = clkc_readl(clk->regofs);
- u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
- u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
- u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
- WARN_ON(fin % MHZ);
- clk->rate = fin / MHZ * nf / nr / od * MHZ;
- }
-
- return clk->rate;
-}
-
-static int std_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin, nf, nr, od, reg;
-
- /*
- * fout = fin * nf / (nr * od);
- * set od = 1, nr = fin/MHz, so fout = nf * MHz
- */
-
- nf = rate / MHZ;
- if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
- return -EINVAL;
-
- fin = clk_get_rate(clk->parent);
- BUG_ON(fin < MHZ);
-
- nr = fin / MHZ;
- BUG_ON((fin % MHZ) || nr > BIT(6));
-
- od = 1;
-
- reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
- clkc_writel(reg, clk->regofs);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
- clkc_writel((nf >> 1) - 1, reg);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
- while (!(clkc_readl(reg) & BIT(6)))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
- return 0;
-}
-
-static struct clk_ops std_pll_ops = {
- .get_rate = std_pll_get_rate,
- .set_rate = std_pll_set_rate,
-};
-
-static struct clk clk_pll1 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL1_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll2 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL2_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll3 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL3_CFG0,
- .ops = &std_pll_ops,
-};
-
-/*
- * clock domains - cpu, mem, sys/io
- */
-
-static struct clk clk_mem;
-
-static struct clk *dmn_get_parent(struct clk *clk)
-{
- struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- WARN_ON((cfg & (BIT(3) - 1)) > 4);
- return clks[cfg & (BIT(3) - 1)];
-}
-
-static int dmn_set_parent(struct clk *clk, struct clk *parent)
-{
- const struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- int i;
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (clks[i] == parent) {
- cfg &= ~(BIT(3) - 1);
- clkc_writel(cfg | i, clk->regofs);
- /* BIT(3) - switching status: 1 - busy, 0 - done */
- while (clkc_readl(clk->regofs) & BIT(3))
- cpu_relax();
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static unsigned long dmn_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 cfg = clkc_readl(clk->regofs);
- if (cfg & BIT(24)) {
- /* fcd bypass mode */
- clk->rate = fin;
- } else {
- /*
- * wait count: bit[19:16], hold count: bit[23:20]
- */
- u32 wait = (cfg >> 16) & (BIT(4) - 1);
- u32 hold = (cfg >> 20) & (BIT(4) - 1);
-
- clk->rate = fin / (wait + hold + 2);
- }
-
- return clk->rate;
-}
-
-static int dmn_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin;
- unsigned ratio, wait, hold, reg;
- unsigned bits = (clk == &clk_mem) ? 3 : 4;
-
- fin = clk_get_rate(clk->parent);
- ratio = fin / rate;
-
- if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
- return -EINVAL;
-
- WARN_ON(fin % rate);
-
- wait = (ratio >> 1) - 1;
- hold = ratio - wait - 2;
-
- reg = clkc_readl(clk->regofs);
- reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
- reg |= (wait << 16) | (hold << 20) | BIT(25);
- clkc_writel(reg, clk->regofs);
-
- /* waiting FCD been effective */
- while (clkc_readl(clk->regofs) & BIT(25))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return 0;
-}
-
-/*
- * cpu clock has no FCD register in Prima2, can only change pll
- */
-static int cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret1, ret2;
- struct clk *cur_parent, *tmp_parent;
-
- cur_parent = dmn_get_parent(clk);
- BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
-
- /* switch to tmp pll before setting parent clock's rate */
- tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
- ret1 = dmn_set_parent(clk, tmp_parent);
- BUG_ON(ret1);
-
- ret2 = clk_set_rate(cur_parent, rate);
-
- ret1 = dmn_set_parent(clk, cur_parent);
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return ret2 ? ret2 : ret1;
-}
-
-static struct clk_ops cpu_ops = {
- .get_parent = dmn_get_parent,
- .set_parent = dmn_set_parent,
- .set_rate = cpu_set_rate,
-};
-
-static struct clk clk_cpu = {
- .parent = &clk_pll1,
- .regofs = SIRFSOC_CLKC_CPU_CFG,
- .ops = &cpu_ops,
-};
-
-
-static struct clk_ops msi_ops = {
- .set_rate = dmn_set_rate,
- .get_rate = dmn_get_rate,
- .set_parent = dmn_set_parent,
- .get_parent = dmn_get_parent,
-};
-
-static struct clk clk_mem = {
- .parent = &clk_pll2,
- .regofs = SIRFSOC_CLKC_MEM_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_sys = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_SYS_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_io = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_IO_CFG,
- .ops = &msi_ops,
-};
-
-/*
- * on-chip clock sets
- */
-static struct clk_lookup onchip_clks[] = {
- {
- .dev_id = "rtc",
- .clk = &clk_rtc,
- }, {
- .dev_id = "osc",
- .clk = &clk_osc,
- }, {
- .dev_id = "pll1",
- .clk = &clk_pll1,
- }, {
- .dev_id = "pll2",
- .clk = &clk_pll2,
- }, {
- .dev_id = "pll3",
- .clk = &clk_pll3,
- }, {
- .dev_id = "cpu",
- .clk = &clk_cpu,
- }, {
- .dev_id = "mem",
- .clk = &clk_mem,
- }, {
- .dev_id = "sys",
- .clk = &clk_sys,
- }, {
- .dev_id = "io",
- .clk = &clk_io,
- },
-};
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (clk->parent)
- clk_enable(clk->parent);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (!clk->usage++ && clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return;
-
- WARN_ON(!clk->usage);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->usage == 0 && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- if (clk->parent)
- clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->rate)
- return clk->rate;
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->ops && clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_rate)
- return -EINVAL;
-
- return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret;
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_parent)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->ops->set_parent(clk, parent);
- if (!ret) {
- parent->usage += clk->usage;
- clk->parent->usage -= clk->usage;
- BUG_ON(clk->parent->usage < 0);
- clk->parent = parent;
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return NULL;
-
- if (!clk->ops || !clk->ops->get_parent)
- return clk->parent;
-
- spin_lock_irqsave(&clocks_lock, flags);
- clk->parent = clk->ops->get_parent(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static void __init sirfsoc_clk_init(void)
-{
- clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
-}
-
-static struct of_device_id clkc_ids[] = {
- { .compatible = "sirf,prima2-clkc" },
- {},
-};
-
-void __init sirfsoc_of_clk_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct map_desc sirfsoc_clkc_iodesc = {
- .virtual = SIRFSOC_CLOCK_VA_BASE,
- .type = MT_DEVICE,
- };
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- panic("unable to find compatible clkc node in dtb\n");
-
- if (of_address_to_resource(np, 0, &res))
- panic("unable to find clkc range in dtb");
- of_node_put(np);
-
- sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
- sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
-
- iotable_init(&sirfsoc_clkc_iodesc, 1);
-
- sirfsoc_clk_init();
-}
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index 8f0429d..e9a17ae 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -38,7 +38,6 @@
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.atag_offset = 0x100,
- .init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index f224107..d95bf25 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -21,6 +21,8 @@
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
+#include "common.h"
+
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
@@ -188,9 +190,13 @@
static void __init sirfsoc_timer_init(void)
{
unsigned long rate;
+ struct clk *clk;
+
+ /* initialize clocking early, we want to set the OS timer */
+ sirfsoc_of_clk_init();
/* timer's input clock is io clock */
- struct clk *clk = clk_get_sys("io", NULL);
+ clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb..ff007d1 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
@@ -226,115 +225,10 @@
.cd_invert = true,
};
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
- .ref = 24000000,
- .vco_max = ICST307_VCO_MAX,
- .vco_min = ICST307_VCO_MIN,
- .vd_min = 4 + 8,
- .vd_max = 511 + 8,
- .rd_min = 1 + 2,
- .rd_max = 127 + 2,
- .s2div = icst307_s2div,
- .idx2s = icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
- void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, sys_lock);
- writel(val, clk->vcoreg);
- writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
- .ops = &oscvco_clk_ops,
- .params = &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
- .rate = 24000000,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* UART0 */
- .dev_id = "dev:uart0",
- .clk = &ref24_clk,
- }, { /* UART1 */
- .dev_id = "dev:uart1",
- .clk = &ref24_clk,
- }, { /* UART2 */
- .dev_id = "dev:uart2",
- .clk = &ref24_clk,
- }, { /* UART3 */
- .dev_id = "fpga:uart3",
- .clk = &ref24_clk,
- }, { /* UART3 is on the dev chip in PB1176 */
- .dev_id = "dev:uart3",
- .clk = &ref24_clk,
- }, { /* UART4 only exists in PB1176 */
- .dev_id = "fpga:uart4",
- .clk = &ref24_clk,
- }, { /* KMI0 */
- .dev_id = "fpga:kmi0",
- .clk = &ref24_clk,
- }, { /* KMI1 */
- .dev_id = "fpga:kmi1",
- .clk = &ref24_clk,
- }, { /* MMC0 */
- .dev_id = "fpga:mmc0",
- .clk = &ref24_clk,
- }, { /* CLCD is in the PB1176 and EB DevChip */
- .dev_id = "dev:clcd",
- .clk = &oscvco_clk,
- }, { /* PB:CLCD */
- .dev_id = "issp:clcd",
- .clk = &oscvco_clk,
- }, { /* SSP */
- .dev_id = "dev:ssp0",
- .clk = &ref24_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
void __init realview_init_early(void)
{
void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
- if (machine_is_realview_pb1176())
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
- else
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
}
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d077..0000000
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- const struct icst_params *params;
- void __iomem *vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index baf382c..a33e33b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -414,6 +415,7 @@
else
timer_irq = IRQ_EB_TIMER0_1;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(timer_irq);
realview_eb_twd_init();
}
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index b1d7caf..f0298cb 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,6 +29,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -326,6 +327,7 @@
timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
realview_timer_init(IRQ_DC1176_TIMER0);
}
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index a98c536..1f019f7 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -312,6 +313,7 @@
timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_TC11MP_TIMER0_1);
realview_pb11mp_twd_init();
}
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 5965017..5032775 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -261,6 +262,7 @@
timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 3f2f605..de64ba0 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,6 +26,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -320,6 +321,7 @@
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBX_TIMER0_1);
realview_pbx_twd_init();
}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf..2d76e4f 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@
select CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
+ select COMMON_CLK
config UX500_SOC_DB8500
bool
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 026086f..5691ef6 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o cpu.o devices.o devices-common.o \
+obj-y := cpu.o devices.o devices-common.o \
id.o usb.o timer.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index 8d73b06..0000000
--- a/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h> /* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN 0x00
-#define PRCC_PCKDIS 0x04
-#define PRCC_KCKEN 0x08
-#define PRCC_KCKDIS 0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET 0x510
-#define PRCM_YYCLKEN1_MGT_SET 0x514
-#define PRCM_YYCLKEN0_MGT_CLR 0x518
-#define PRCM_YYCLKEN1_MGT_CLR 0x51C
-#define PRCM_YYCLKEN0_MGT_VAL 0x520
-#define PRCM_YYCLKEN1_MGT_VAL 0x524
-
-#define PRCM_SVAMMDSPCLK_MGT 0x008
-#define PRCM_SIAMMDSPCLK_MGT 0x00C
-#define PRCM_SGACLK_MGT 0x014
-#define PRCM_UARTCLK_MGT 0x018
-#define PRCM_MSP02CLK_MGT 0x01C
-#define PRCM_MSP1CLK_MGT 0x288
-#define PRCM_I2CCLK_MGT 0x020
-#define PRCM_SDMMCCLK_MGT 0x024
-#define PRCM_SLIMCLK_MGT 0x028
-#define PRCM_PER1CLK_MGT 0x02C
-#define PRCM_PER2CLK_MGT 0x030
-#define PRCM_PER3CLK_MGT 0x034
-#define PRCM_PER5CLK_MGT 0x038
-#define PRCM_PER6CLK_MGT 0x03C
-#define PRCM_PER7CLK_MGT 0x040
-#define PRCM_LCDCLK_MGT 0x044
-#define PRCM_BMLCLK_MGT 0x04C
-#define PRCM_HSITXCLK_MGT 0x050
-#define PRCM_HSIRXCLK_MGT 0x054
-#define PRCM_HDMICLK_MGT 0x058
-#define PRCM_APEATCLK_MGT 0x05C
-#define PRCM_APETRACECLK_MGT 0x060
-#define PRCM_MCDECLK_MGT 0x064
-#define PRCM_IPI2CCLK_MGT 0x068
-#define PRCM_DSIALTCLK_MGT 0x06C
-#define PRCM_DMACLK_MGT 0x074
-#define PRCM_B2R2CLK_MGT 0x078
-#define PRCM_TVCLK_MGT 0x07C
-#define PRCM_TCR 0x1C8
-#define PRCM_TCR_STOPPED (1 << 16)
-#define PRCM_TCR_DOZE_MODE (1 << 17)
-#define PRCM_UNIPROCLK_MGT 0x278
-#define PRCM_SSPCLK_MGT 0x280
-#define PRCM_RNGCLK_MGT 0x284
-#define PRCM_UICCCLK_MGT 0x27C
-
-#define PRCM_MGT_ENABLE (1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
- if (clk->enabled++ == 0) {
- if (clk->parent_cluster)
- __clk_enable(clk->parent_cluster);
-
- if (clk->parent_periph)
- __clk_enable(clk->parent_periph);
-
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- }
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
- if (--clk->enabled == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- if (clk->parent_periph)
- __clk_disable(clk->parent_periph);
-
- if (clk->parent_cluster)
- __clk_disable(clk->parent_cluster);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(!clk->enabled);
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
- void __iomem *addr;
- u32 tcr;
- int mtu = (int) clk->data;
- /*
- * One of these is selected eventually
- * TODO: Replace the constant with a reference
- * to the ULP source once this is modeled.
- */
- unsigned long clk32k = 32768;
- unsigned long mturate;
- unsigned long retclk;
-
- if (cpu_is_u8500_family())
- addr = __io_address(U8500_PRCMU_BASE);
- else
- ux500_unknown_soc();
-
- /*
- * On a startup, always conifgure the TCR to the doze mode;
- * bootloaders do it for us. Do this in the kernel too.
- */
- writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
- tcr = readl(addr + PRCM_TCR);
-
- /* Get the rate from the parent as a default */
- if (clk->parent_periph)
- mturate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- mturate = clk_get_rate(clk->parent_cluster);
- else
- /* We need to be connected SOMEWHERE */
- BUG();
-
- /* Return the clock selected for this MTU */
- if (tcr & (1 << mtu))
- retclk = clk32k;
- else
- retclk = mturate;
-
- pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
- return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- /*
- * If there is a custom getrate callback for this clock,
- * it will take precedence.
- */
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- rate = clk->rate;
- if (!rate) {
- if (clk->parent_periph)
- rate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- rate = clk_get_rate(clk->parent_cluster);
- }
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- /*TODO*/
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- /*TODO*/
- return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
- void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
- void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
- .enable = clk_prcmu_enable,
- .disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
- [1] = U8500_CLKRST1_BASE,
- [2] = U8500_CLKRST2_BASE,
- [3] = U8500_CLKRST3_BASE,
- [5] = U8500_CLKRST5_BASE,
- [6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
- .enable = clk_prcc_enable,
- .disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
- .name = "clk_32khz",
- .rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
-static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL);
-static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
- .name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
- CLK(dummy_apb_pclk, NULL, "apb_pclk"),
-
- /* Peripheral Cluster #1 */
- CLK(gpio0, "gpio.0", NULL),
- CLK(gpio0, "gpio.1", NULL),
- CLK(slimbus0, "slimbus0", NULL),
- CLK(i2c2, "nmk-i2c.2", NULL),
- CLK(sdi0, "sdi0", NULL),
- CLK(msp0, "ux500-msp-i2s.0", NULL),
- CLK(i2c1, "nmk-i2c.1", NULL),
- CLK(uart1, "uart1", NULL),
- CLK(uart0, "uart0", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(gpio2, "gpio.2", NULL),
- CLK(gpio2, "gpio.3", NULL),
- CLK(gpio2, "gpio.4", NULL),
- CLK(gpio2, "gpio.5", NULL),
- CLK(sdi5, "sdi5", NULL),
- CLK(uart2, "uart2", NULL),
- CLK(ske, "ske", NULL),
- CLK(ske, "nmk-ske-keypad", NULL),
- CLK(sdi2, "sdi2", NULL),
- CLK(i2c0, "nmk-i2c.0", NULL),
- CLK(fsmc, "fsmc", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(gpio3, "gpio.8", NULL),
-
- /* Peripheral Cluster #6 */
- CLK(hash1, "hash1", NULL),
- CLK(pka, "pka", NULL),
- CLK(hash0, "hash0", NULL),
- CLK(cryp0, "cryp0", NULL),
- CLK(cryp1, "cryp1", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(svaclk, "sva", NULL),
- CLK(siaclk, "sia", NULL),
- CLK(sgaclk, "sga", NULL),
- CLK(slimclk, "slim", NULL),
- CLK(lcdclk, "lcd", NULL),
- CLK(bmlclk, "bml", NULL),
- CLK(hsitxclk, "stm-hsi.0", NULL),
- CLK(hsirxclk, "stm-hsi.1", NULL),
- CLK(hdmiclk, "hdmi", NULL),
- CLK(apeatclk, "apeat", NULL),
- CLK(apetraceclk, "apetrace", NULL),
- CLK(mcdeclk, "mcde", NULL),
- CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40.0", NULL),
- CLK(b2r2clk, "b2r2", NULL),
- CLK(tvclk, "tv", NULL),
-
- /* Peripheral Cluster #1 */
- CLK(i2c4, "nmk-i2c.4", NULL),
- CLK(spi3, "spi3", NULL),
- CLK(msp1, "ux500-msp-i2s.1", NULL),
- CLK(msp3, "ux500-msp-i2s.3", NULL),
-
- /* Peripheral Cluster #2 */
- CLK(gpio1, "gpio.6", NULL),
- CLK(gpio1, "gpio.7", NULL),
- CLK(ssitx, "ssitx", NULL),
- CLK(ssirx, "ssirx", NULL),
- CLK(spi0, "spi0", NULL),
- CLK(sdi3, "sdi3", NULL),
- CLK(sdi1, "sdi1", NULL),
- CLK(msp2, "ux500-msp-i2s.2", NULL),
- CLK(sdi4, "sdi4", NULL),
- CLK(pwl, "pwl", NULL),
- CLK(spi1, "spi1", NULL),
- CLK(spi2, "spi2", NULL),
- CLK(i2c3, "nmk-i2c.3", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(ssp1, "ssp1", NULL),
- CLK(ssp0, "ssp0", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(usb, "musb-ux500.0", "usb"),
-
- /* Peripheral Cluster #6 */
- CLK(mtu1, "mtu1", NULL),
- CLK(mtu0, "mtu0", NULL),
- CLK(cfgreg, "cfgreg", NULL),
- CLK(hash1, "hash1", NULL),
- CLK(unipro, "unipro", NULL),
- CLK(rng, "rng", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(uniproclk, "uniproclk", NULL),
- CLK(dsialtclk, "dsialt", NULL),
-
- /* Bank 1 */
- CLK(rngclk, "rng", NULL),
- CLK(uiccclk, "uicc", NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes with
- * powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
- while (num--) {
- /* Check that the clock has not been already registered */
- if (!(cl->clk->list.prev != cl->clk->list.next))
- list_add_tail(&cl->clk->list, &clk_list);
-
- cl++;
- }
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char cusecount[128];
- unsigned int len;
-
- len = sprintf(cusecount, "%u\n", clk->enabled);
- return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char crate[128];
- unsigned int rate;
- unsigned int len;
-
- rate = clk_get_rate(clk);
- len = sprintf(crate, "%u\n", rate);
- return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
- .read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
- .read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
- struct dentry *p_dentry)
-{
- struct dentry *d, *clk_d;
- const char *p = c->name;
-
- if (!p)
- p = "BUG";
-
- clk_d = debugfs_create_dir(p, p_dentry);
- if (!clk_d)
- return NULL;
-
- d = debugfs_create_file("usecount", S_IRUGO,
- clk_d, c, &usecount_fops);
- if (!d)
- goto err_out;
- d = debugfs_create_file("rate", S_IRUGO,
- clk_d, c, &set_rate_fops);
- if (!d)
- goto err_out;
- /*
- * TODO : not currently available in ux500
- * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
- * if (!d)
- * goto err_out;
- */
-
- return clk_d;
-
-err_out:
- debugfs_remove_recursive(clk_d);
- return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (!(bpa && !pa)) {
- c->dent = clk_debugfs_register_dir(c,
- pa ? pa->dent : clk_debugfs_root);
- if (!c->dent)
- return -ENOMEM;
- }
-
- if (bpa) {
- c->dent_bus = clk_debugfs_register_dir(c,
- bpa->dent_bus ? bpa->dent_bus : bpa->dent);
- if ((!c->dent_bus) && (c->dent)) {
- debugfs_remove_recursive(c->dent);
- c->dent = NULL;
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (pa && (!pa->dent && !pa->dent_bus)) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (bpa && (!bpa->dent && !bpa->dent_bus)) {
- err = clk_debugfs_register(bpa);
- if (err)
- return err;
- }
-
- if ((!c->dent) && (!c->dent_bus)) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clk_list, list) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
- return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
- .get_rate = clk_smp_twd_get_rate,
- .name = "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
- .dev_id = "smp_twd",
- .clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
- unsigned long state, void *data)
-{
- struct cpufreq_freqs *f = data;
-
- if (state == CPUFREQ_PRECHANGE) {
- /* Save frequency in simple Hz */
- clk_smp_twd_rate = (f->new * 1000) / 2;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
- .notifier_call = clk_twd_cpufreq_transition,
-};
-
-int clk_init_smp_twd_cpufreq(void)
-{
- return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#endif
-
-int __init clk_init(void)
-{
- clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
- clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
- return 0;
-}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index 65d27a1..0000000
--- a/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 2010 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable: function to enable the clock
- * @disable: function to disable the clock
- * @get_rate: function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock. All of these functions are optional. If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
- void (*enable) (struct clk *);
- void (*disable) (struct clk *);
- unsigned long (*get_rate) (struct clk *);
- int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops: pointer to clkops struct used to control this clock
- * @name: name, for debugging
- * @enabled: refcount. positive if enabled, zero if disabled
- * @get_rate: custom callback for getting the clock rate
- * @data: custom per-clock data for example for the get_rate
- * callback
- * @rate: fixed rate for clocks which don't implement
- * ops->getrate
- * @prcmu_cg_off: address offset of the combined enable/disable register
- * (used on u8500v1)
- * @prcmu_cg_bit: bit in the combined enable/disable register (used on
- * u8500v1)
- * @prcmu_cg_mgt: address of the enable/disable register (used on
- * u8500ed)
- * @cluster: peripheral cluster number
- * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
- * -1 if no kernel clock exists.
- * @parent_cluster: pointer to parent's cluster clk struct
- * @parent_periph: pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock. Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * (1) the parent cluster (bus) clock at the PRCMU level
- * (2) the parent peripheral clock (if any) at the PRCMU level
- * (3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
- const struct clkops *ops;
- const char *name;
- unsigned int enabled;
- unsigned long (*get_rate)(struct clk *);
- void *data;
-
- unsigned long rate;
- struct list_head list;
-
- /* These three are only for PRCMU clks */
-
- unsigned int prcmu_cg_off;
- unsigned int prcmu_cg_bit;
- unsigned int prcmu_cg_mgt;
-
- /* The rest are only for PRCC clks */
-
- int cluster;
- unsigned int prcc_bus;
- unsigned int prcc_kernel;
-
- struct clk *parent_cluster;
- struct clk *parent_periph;
-#if defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
- struct dentry *dent_bus; /* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .rate = _rate, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk \
- }
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk, \
- .get_rate = _callback, \
- .data = (void *) _data \
- }
-
-
-#define CLK(_clk, _devname, _conname) \
- { \
- .clk = &clk_##_clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e2360e7..17a78ec 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,7 +8,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
@@ -17,6 +16,7 @@
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -25,8 +25,6 @@
#include <mach/setup.h>
#include <mach/devices.h>
-#include "clock.h"
-
void __iomem *_PRCMU_BASE;
/*
@@ -70,13 +68,17 @@
*/
if (cpu_is_u8500_family())
db8500_prcmu_early_init();
- clk_init();
+
+ if (cpu_is_u8500_family())
+ u8500_clk_init();
+ else if (cpu_is_u9540())
+ u9540_clk_init();
+ else if (cpu_is_u8540())
+ u8540_clk_init();
}
void __init ux500_init_late(void)
{
- clk_debugfs_init();
- clk_init_smp_twd_cpufreq();
}
static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7128e97..28ba09f 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -52,7 +52,6 @@
extern void imx35_soc_init(void);
extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
extern void imx51_init_late(void);
extern void imx53_init_late(void);
extern void epit_timer_init(void __iomem *base, int irq);
@@ -137,11 +136,6 @@
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
deleted file mode 100644
index 9761e00..0000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-
-#include <mach/iomux-v3.h>
-
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_ 0x00
-
-#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
-
-
-#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \
- IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \
- IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \
- IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \
- IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \
- IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \
- IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \
- IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \
- IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \
- IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \
- IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \
- IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \
- IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7f0b5ca..bace9e9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -40,4 +40,17 @@
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
+config COMMON_CLK_VERSATILE
+ bool "Clock driver for ARM Reference designs"
+ depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+ ---help---
+ Supports clocking on ARM Reference designs Integrator/AP,
+ Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+
+config COMMON_CLK_MAX77686
+ tristate "Clock driver for Maxim 77686 MFD"
+ depends on MFD_MAX77686
+ ---help---
+ This driver supports Maxim 77686 crystal oscillator clock.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5869ea3..6327536 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -9,7 +9,14 @@
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
-obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
+obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_MMP) += mmp/
+endif
+obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_U8500) += ux500/
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
+obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
new file mode 100644
index 0000000..f20b750
--- /dev/null
+++ b/drivers/clk/clk-ls1x.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <loongson1.h>
+
+#define OSC 33
+
+static DEFINE_SPINLOCK(_lock);
+
+static int ls1x_pll_clk_enable(struct clk_hw *hw)
+{
+ return 0;
+}
+
+static void ls1x_pll_clk_disable(struct clk_hw *hw)
+{
+}
+
+static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 pll, rate;
+
+ pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+ rate = ((12 + (pll & 0x3f)) * 1000000) +
+ ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
+ rate *= OSC;
+ rate >>= 1;
+
+ return rate;
+}
+
+static const struct clk_ops ls1x_pll_clk_ops = {
+ .enable = ls1x_pll_clk_enable,
+ .disable = ls1x_pll_clk_disable,
+ .recalc_rate = ls1x_pll_recalc_rate,
+};
+
+static struct clk * __init clk_register_pll(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags)
+{
+ struct clk_hw *hw;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the divider */
+ hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
+ if (!hw) {
+ pr_err("%s: could not allocate clk_hw\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &ls1x_pll_clk_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ hw->init = &init;
+
+ /* register the clock */
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ kfree(hw);
+
+ return clk;
+}
+
+void __init ls1x_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
+ clk_prepare_enable(clk);
+
+ clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
+ DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "cpu", NULL);
+
+ clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+ DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "dc", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+ DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "ahb", NULL);
+ clk_register_clkdev(clk, "stmmaceth", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "apb", NULL);
+ clk_register_clkdev(clk, "serial8250", NULL);
+}
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
new file mode 100644
index 0000000..ac5f543
--- /dev/null
+++ b/drivers/clk/clk-max77686.c
@@ -0,0 +1,244 @@
+/*
+ * clk-max77686.c - Clock driver for Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/clkdev.h>
+
+enum {
+ MAX77686_CLK_AP = 0,
+ MAX77686_CLK_CP,
+ MAX77686_CLK_PMIC,
+ MAX77686_CLKS_NUM,
+};
+
+struct max77686_clk {
+ struct max77686_dev *iodev;
+ u32 mask;
+ struct clk_hw hw;
+ struct clk_lookup *lookup;
+};
+
+static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct max77686_clk, hw);
+}
+
+static int max77686_clk_prepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
+
+ return ret;
+}
+
+static void max77686_clk_unprepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return;
+
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
+}
+
+static int max77686_clk_is_enabled(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+ u32 val;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_read(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, &val);
+
+ if (ret < 0)
+ return -EINVAL;
+
+ return val & max77686->mask;
+}
+
+static struct clk_ops max77686_clk_ops = {
+ .prepare = max77686_clk_prepare,
+ .unprepare = max77686_clk_unprepare,
+ .is_enabled = max77686_clk_is_enabled,
+};
+
+static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
+ [MAX77686_CLK_AP] = {
+ .name = "32khz_ap",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_CP] = {
+ .name = "32khz_cp",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_PMIC] = {
+ .name = "32khz_pmic",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static int max77686_clk_register(struct device *dev,
+ struct max77686_clk *max77686)
+{
+ struct clk *clk;
+ struct clk_hw *hw = &max77686->hw;
+
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ return -ENOMEM;
+
+ max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
+ GFP_KERNEL);
+ if (IS_ERR(max77686->lookup))
+ return -ENOMEM;
+
+ max77686->lookup->con_id = hw->init->name;
+ max77686->lookup->clk = clk;
+
+ clkdev_add(max77686->lookup);
+
+ return 0;
+}
+
+static __devinit int max77686_clk_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_clk **max77686_clks;
+ int i, ret;
+
+ max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
+ * MAX77686_CLKS_NUM, GFP_KERNEL);
+ if (IS_ERR(max77686_clks))
+ return -ENOMEM;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct max77686_clk), GFP_KERNEL);
+ if (IS_ERR(max77686_clks[i]))
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i]->iodev = iodev;
+ max77686_clks[i]->mask = 1 << i;
+ max77686_clks[i]->hw.init = &max77686_clks_init[i];
+
+ ret = max77686_clk_register(&pdev->dev, max77686_clks[i]);
+ if (ret) {
+ switch (i) {
+ case MAX77686_CLK_AP:
+ dev_err(&pdev->dev, "Fail to register CLK_AP\n");
+ goto err_clk_ap;
+ break;
+ case MAX77686_CLK_CP:
+ dev_err(&pdev->dev, "Fail to register CLK_CP\n");
+ goto err_clk_cp;
+ break;
+ case MAX77686_CLK_PMIC:
+ dev_err(&pdev->dev, "Fail to register CLK_PMIC\n");
+ goto err_clk_pmic;
+ }
+ }
+ }
+
+ platform_set_drvdata(pdev, max77686_clks);
+
+ goto out;
+
+err_clk_pmic:
+ clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk);
+err_clk_cp:
+ clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk);
+err_clk_ap:
+out:
+ return ret;
+}
+
+static int __devexit max77686_clk_remove(struct platform_device *pdev)
+{
+ struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ clkdev_drop(max77686_clks[i]->lookup);
+ kfree(max77686_clks[i]->hw.clk);
+ }
+ return 0;
+}
+
+static const struct platform_device_id max77686_clk_id[] = {
+ { "max77686-clk", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_clk_id);
+
+static struct platform_driver max77686_clk_driver = {
+ .driver = {
+ .name = "max77686-clk",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_clk_probe,
+ .remove = __devexit_p(max77686_clk_remove),
+ .id_table = max77686_clk_id,
+};
+
+static int __init max77686_clk_init(void)
+{
+ return platform_driver_register(&max77686_clk_driver);
+}
+subsys_initcall(max77686_clk_init);
+
+static void __init max77686_clk_cleanup(void)
+{
+ platform_driver_unregister(&max77686_clk_driver);
+}
+module_exit(max77686_clk_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
+MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
new file mode 100644
index 0000000..517874f
--- /dev/null
+++ b/drivers/clk/clk-prima2.c
@@ -0,0 +1,1171 @@
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0014
+#define SIRFSOC_CLKC_CPU_CFG 0x0018
+#define SIRFSOC_CLKC_MEM_CFG 0x001c
+#define SIRFSOC_CLKC_SYS_CFG 0x0020
+#define SIRFSOC_CLKC_IO_CFG 0x0024
+#define SIRFSOC_CLKC_DSP_CFG 0x0028
+#define SIRFSOC_CLKC_GFX_CFG 0x002c
+#define SIRFSOC_CLKC_MM_CFG 0x0030
+#define SIRFSOC_CLKC_LCD_CFG 0x0034
+#define SIRFSOC_CLKC_MMC_CFG 0x0038
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
+#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
+#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
+#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
+#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
+#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
+#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
+
+static void *sirfsoc_clk_vbase, *sirfsoc_rsc_vbase;
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+/*
+ * SiRFprimaII clock controller
+ * - 2 oscillators: osc-26MHz, rtc-32.768KHz
+ * - 3 standard configurable plls: pll1, pll2 & pll3
+ * - 2 exclusive plls: usb phy pll and sata phy pll
+ * - 8 clock domains: cpu/cpudiv, mem/memdiv, sys/io, dsp, graphic, multimedia,
+ * display and sdphy.
+ * Each clock domain can select its own clock source from five clock sources,
+ * X_XIN, X_XINW, PLL1, PLL2 and PLL3. The domain clock is used as the source
+ * clock of the group clock.
+ * - dsp domain: gps, mf
+ * - io domain: dmac, nand, audio, uart, i2c, spi, usp, pwm, pulse
+ * - sys domain: security
+ */
+
+struct clk_pll {
+ struct clk_hw hw;
+ unsigned short regofs; /* register offset */
+};
+
+#define to_pllclk(_hw) container_of(_hw, struct clk_pll, hw)
+
+struct clk_dmn {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+ unsigned short regofs; /* register offset */
+};
+
+#define to_dmnclk(_hw) container_of(_hw, struct clk_dmn, hw)
+
+struct clk_std {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+};
+
+#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
+
+static int std_clk_is_enabled(struct clk_hw *hw);
+static int std_clk_enable(struct clk_hw *hw);
+static void std_clk_disable(struct clk_hw *hw);
+
+static inline unsigned long clkc_readl(unsigned reg)
+{
+ return readl(sirfsoc_clk_vbase + reg);
+}
+
+static inline void clkc_writel(u32 val, unsigned reg)
+{
+ writel(val, sirfsoc_clk_vbase + reg);
+}
+
+/*
+ * std pll
+ */
+
+static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long fin = parent_rate;
+ struct clk_pll *clk = to_pllclk(hw);
+ u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
+ SIRFSOC_CLKC_PLL1_CFG0;
+
+ if (clkc_readl(regcfg2) & BIT(2)) {
+ /* pll bypass mode */
+ return fin;
+ } else {
+ /* fout = fin * nf / nr / od */
+ u32 cfg0 = clkc_readl(clk->regofs);
+ u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
+ u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
+ u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
+ WARN_ON(fin % MHZ);
+ return fin / MHZ * nf / nr / od * MHZ;
+ }
+}
+
+static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin, nf, nr, od;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+ rate = rate - rate % MHZ;
+
+ nf = rate / MHZ;
+ if (nf > BIT(13))
+ nf = BIT(13);
+ if (nf < 1)
+ nf = 1;
+
+ fin = *parent_rate;
+
+ nr = fin / MHZ;
+ if (nr > BIT(6))
+ nr = BIT(6);
+ od = 1;
+
+ return fin * nf / (nr * od);
+}
+
+static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *clk = to_pllclk(hw);
+ unsigned long fin, nf, nr, od, reg;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+
+ nf = rate / MHZ;
+ if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
+ return -EINVAL;
+
+ fin = parent_rate;
+ BUG_ON(fin < MHZ);
+
+ nr = fin / MHZ;
+ BUG_ON((fin % MHZ) || nr > BIT(6));
+
+ od = 1;
+
+ reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
+ clkc_writel(reg, clk->regofs);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
+ clkc_writel((nf >> 1) - 1, reg);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
+ while (!(clkc_readl(reg) & BIT(6)))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops std_pll_ops = {
+ .recalc_rate = pll_clk_recalc_rate,
+ .round_rate = pll_clk_round_rate,
+ .set_rate = pll_clk_set_rate,
+};
+
+static const char *pll_clk_parents[] = {
+ "osc",
+};
+
+static struct clk_init_data clk_pll1_init = {
+ .name = "pll1",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll2_init = {
+ .name = "pll2",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll3_init = {
+ .name = "pll3",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_pll clk_pll1 = {
+ .regofs = SIRFSOC_CLKC_PLL1_CFG0,
+ .hw = {
+ .init = &clk_pll1_init,
+ },
+};
+
+static struct clk_pll clk_pll2 = {
+ .regofs = SIRFSOC_CLKC_PLL2_CFG0,
+ .hw = {
+ .init = &clk_pll2_init,
+ },
+};
+
+static struct clk_pll clk_pll3 = {
+ .regofs = SIRFSOC_CLKC_PLL3_CFG0,
+ .hw = {
+ .init = &clk_pll3_init,
+ },
+};
+
+/*
+ * usb uses specified pll
+ */
+
+static int usb_pll_clk_enable(struct clk_hw *hw)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg &= ~(SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ while (!(readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL) &
+ SIRFSOC_USBPHY_PLL_LOCK))
+ cpu_relax();
+
+ return 0;
+}
+
+static void usb_pll_clk_disable(struct clk_hw *clk)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg |= (SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+}
+
+static unsigned long usb_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ return (reg & SIRFSOC_USBPHY_PLL_BYPASS) ? parent_rate : 48*MHZ;
+}
+
+static struct clk_ops usb_pll_ops = {
+ .enable = usb_pll_clk_enable,
+ .disable = usb_pll_clk_disable,
+ .recalc_rate = usb_pll_clk_recalc_rate,
+};
+
+static struct clk_init_data clk_usb_pll_init = {
+ .name = "usb_pll",
+ .ops = &usb_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_hw usb_pll_clk_hw = {
+ .init = &clk_usb_pll_init,
+};
+
+/*
+ * clock domains - cpu, mem, sys/io, dsp, gfx
+ */
+
+static const char *dmn_clk_parents[] = {
+ "rtc",
+ "osc",
+ "pll1",
+ "pll2",
+ "pll3",
+};
+
+static u8 dmn_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return 4;
+
+ WARN_ON((cfg & (BIT(3) - 1)) > 4);
+
+ return cfg & (BIT(3) - 1);
+}
+
+static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return -EINVAL;
+
+ cfg &= ~(BIT(3) - 1);
+ clkc_writel(cfg | parent, clk->regofs);
+ /* BIT(3) - switching status: 1 - busy, 0 - done */
+ while (clkc_readl(clk->regofs) & BIT(3))
+ cpu_relax();
+
+ return 0;
+}
+
+static unsigned long dmn_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+
+{
+ unsigned long fin = parent_rate;
+ struct clk_dmn *clk = to_dmnclk(hw);
+
+ u32 cfg = clkc_readl(clk->regofs);
+
+ if (cfg & BIT(24)) {
+ /* fcd bypass mode */
+ return fin;
+ } else {
+ /*
+ * wait count: bit[19:16], hold count: bit[23:20]
+ */
+ u32 wait = (cfg >> 16) & (BIT(4) - 1);
+ u32 hold = (cfg >> 20) & (BIT(4) - 1);
+
+ return fin / (wait + hold + 2);
+ }
+}
+
+static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin;
+ unsigned ratio, wait, hold;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = *parent_rate;
+ ratio = fin / rate;
+
+ if (ratio < 2)
+ ratio = 2;
+ if (ratio > BIT(bits + 1))
+ ratio = BIT(bits + 1);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ return fin / (wait + hold + 2);
+}
+
+static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ unsigned long fin;
+ unsigned ratio, wait, hold, reg;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = parent_rate;
+ ratio = fin / rate;
+
+ if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
+ return -EINVAL;
+
+ WARN_ON(fin % rate);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ reg = clkc_readl(clk->regofs);
+ reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
+ reg |= (wait << 16) | (hold << 20) | BIT(25);
+ clkc_writel(reg, clk->regofs);
+
+ /* waiting FCD been effective */
+ while (clkc_readl(clk->regofs) & BIT(25))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops msi_ops = {
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_mem_init = {
+ .name = "mem",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mem = {
+ .regofs = SIRFSOC_CLKC_MEM_CFG,
+ .hw = {
+ .init = &clk_mem_init,
+ },
+};
+
+static struct clk_init_data clk_sys_init = {
+ .name = "sys",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_GATE,
+};
+
+static struct clk_dmn clk_sys = {
+ .regofs = SIRFSOC_CLKC_SYS_CFG,
+ .hw = {
+ .init = &clk_sys_init,
+ },
+};
+
+static struct clk_init_data clk_io_init = {
+ .name = "io",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_io = {
+ .regofs = SIRFSOC_CLKC_IO_CFG,
+ .hw = {
+ .init = &clk_io_init,
+ },
+};
+
+static struct clk_ops cpu_ops = {
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_cpu_init = {
+ .name = "cpu",
+ .ops = &cpu_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_PARENT,
+};
+
+static struct clk_dmn clk_cpu = {
+ .regofs = SIRFSOC_CLKC_CPU_CFG,
+ .hw = {
+ .init = &clk_cpu_init,
+ },
+};
+
+static struct clk_ops dmn_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+/* dsp, gfx, mm, lcd and vpp domain */
+
+static struct clk_init_data clk_dsp_init = {
+ .name = "dsp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_dsp = {
+ .regofs = SIRFSOC_CLKC_DSP_CFG,
+ .enable_bit = 0,
+ .hw = {
+ .init = &clk_dsp_init,
+ },
+};
+
+static struct clk_init_data clk_gfx_init = {
+ .name = "gfx",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_gfx = {
+ .regofs = SIRFSOC_CLKC_GFX_CFG,
+ .enable_bit = 8,
+ .hw = {
+ .init = &clk_gfx_init,
+ },
+};
+
+static struct clk_init_data clk_mm_init = {
+ .name = "mm",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mm = {
+ .regofs = SIRFSOC_CLKC_MM_CFG,
+ .enable_bit = 9,
+ .hw = {
+ .init = &clk_mm_init,
+ },
+};
+
+static struct clk_init_data clk_lcd_init = {
+ .name = "lcd",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_lcd = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 10,
+ .hw = {
+ .init = &clk_lcd_init,
+ },
+};
+
+static struct clk_init_data clk_vpp_init = {
+ .name = "vpp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_vpp = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 11,
+ .hw = {
+ .init = &clk_vpp_init,
+ },
+};
+
+static struct clk_init_data clk_mmc01_init = {
+ .name = "mmc01",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc01 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 59,
+ .hw = {
+ .init = &clk_mmc01_init,
+ },
+};
+
+static struct clk_init_data clk_mmc23_init = {
+ .name = "mmc23",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc23 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 60,
+ .hw = {
+ .init = &clk_mmc23_init,
+ },
+};
+
+static struct clk_init_data clk_mmc45_init = {
+ .name = "mmc45",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc45 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 61,
+ .hw = {
+ .init = &clk_mmc45_init,
+ },
+};
+
+/*
+ * peripheral controllers in io domain
+ */
+
+static int std_clk_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ return !!(clkc_readl(reg) & BIT(bit));
+}
+
+static int std_clk_enable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) | BIT(bit);
+ clkc_writel(val, reg);
+ return 0;
+}
+
+static void std_clk_disable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) & ~BIT(bit);
+ clkc_writel(val, reg);
+}
+
+static const char *std_clk_io_parents[] = {
+ "io",
+};
+
+static struct clk_ops ios_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+};
+
+static struct clk_init_data clk_dmac0_init = {
+ .name = "dmac0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac0 = {
+ .enable_bit = 32,
+ .hw = {
+ .init = &clk_dmac0_init,
+ },
+};
+
+static struct clk_init_data clk_dmac1_init = {
+ .name = "dmac1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac1 = {
+ .enable_bit = 33,
+ .hw = {
+ .init = &clk_dmac1_init,
+ },
+};
+
+static struct clk_init_data clk_nand_init = {
+ .name = "nand",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_nand = {
+ .enable_bit = 34,
+ .hw = {
+ .init = &clk_nand_init,
+ },
+};
+
+static struct clk_init_data clk_audio_init = {
+ .name = "audio",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_audio = {
+ .enable_bit = 35,
+ .hw = {
+ .init = &clk_audio_init,
+ },
+};
+
+static struct clk_init_data clk_uart0_init = {
+ .name = "uart0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart0 = {
+ .enable_bit = 36,
+ .hw = {
+ .init = &clk_uart0_init,
+ },
+};
+
+static struct clk_init_data clk_uart1_init = {
+ .name = "uart1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart1 = {
+ .enable_bit = 37,
+ .hw = {
+ .init = &clk_uart1_init,
+ },
+};
+
+static struct clk_init_data clk_uart2_init = {
+ .name = "uart2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart2 = {
+ .enable_bit = 38,
+ .hw = {
+ .init = &clk_uart2_init,
+ },
+};
+
+static struct clk_init_data clk_usp0_init = {
+ .name = "usp0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp0 = {
+ .enable_bit = 39,
+ .hw = {
+ .init = &clk_usp0_init,
+ },
+};
+
+static struct clk_init_data clk_usp1_init = {
+ .name = "usp1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp1 = {
+ .enable_bit = 40,
+ .hw = {
+ .init = &clk_usp1_init,
+ },
+};
+
+static struct clk_init_data clk_usp2_init = {
+ .name = "usp2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp2 = {
+ .enable_bit = 41,
+ .hw = {
+ .init = &clk_usp2_init,
+ },
+};
+
+static struct clk_init_data clk_vip_init = {
+ .name = "vip",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_vip = {
+ .enable_bit = 42,
+ .hw = {
+ .init = &clk_vip_init,
+ },
+};
+
+static struct clk_init_data clk_spi0_init = {
+ .name = "spi0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi0 = {
+ .enable_bit = 43,
+ .hw = {
+ .init = &clk_spi0_init,
+ },
+};
+
+static struct clk_init_data clk_spi1_init = {
+ .name = "spi1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi1 = {
+ .enable_bit = 44,
+ .hw = {
+ .init = &clk_spi1_init,
+ },
+};
+
+static struct clk_init_data clk_tsc_init = {
+ .name = "tsc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_tsc = {
+ .enable_bit = 45,
+ .hw = {
+ .init = &clk_tsc_init,
+ },
+};
+
+static struct clk_init_data clk_i2c0_init = {
+ .name = "i2c0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c0 = {
+ .enable_bit = 46,
+ .hw = {
+ .init = &clk_i2c0_init,
+ },
+};
+
+static struct clk_init_data clk_i2c1_init = {
+ .name = "i2c1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c1 = {
+ .enable_bit = 47,
+ .hw = {
+ .init = &clk_i2c1_init,
+ },
+};
+
+static struct clk_init_data clk_pwmc_init = {
+ .name = "pwmc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pwmc = {
+ .enable_bit = 48,
+ .hw = {
+ .init = &clk_pwmc_init,
+ },
+};
+
+static struct clk_init_data clk_efuse_init = {
+ .name = "efuse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_efuse = {
+ .enable_bit = 49,
+ .hw = {
+ .init = &clk_efuse_init,
+ },
+};
+
+static struct clk_init_data clk_pulse_init = {
+ .name = "pulse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pulse = {
+ .enable_bit = 50,
+ .hw = {
+ .init = &clk_pulse_init,
+ },
+};
+
+static const char *std_clk_dsp_parents[] = {
+ "dsp",
+};
+
+static struct clk_init_data clk_gps_init = {
+ .name = "gps",
+ .ops = &ios_ops,
+ .parent_names = std_clk_dsp_parents,
+ .num_parents = ARRAY_SIZE(std_clk_dsp_parents),
+};
+
+static struct clk_std clk_gps = {
+ .enable_bit = 1,
+ .hw = {
+ .init = &clk_gps_init,
+ },
+};
+
+static struct clk_init_data clk_mf_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_mf = {
+ .enable_bit = 2,
+ .hw = {
+ .init = &clk_mf_init,
+ },
+};
+
+static const char *std_clk_sys_parents[] = {
+ "sys",
+};
+
+static struct clk_init_data clk_security_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_sys_parents,
+ .num_parents = ARRAY_SIZE(std_clk_sys_parents),
+};
+
+static struct clk_std clk_security = {
+ .enable_bit = 19,
+ .hw = {
+ .init = &clk_security_init,
+ },
+};
+
+static const char *std_clk_usb_parents[] = {
+ "usb_pll",
+};
+
+static struct clk_init_data clk_usb0_init = {
+ .name = "usb0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb0 = {
+ .enable_bit = 16,
+ .hw = {
+ .init = &clk_usb0_init,
+ },
+};
+
+static struct clk_init_data clk_usb1_init = {
+ .name = "usb1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb1 = {
+ .enable_bit = 17,
+ .hw = {
+ .init = &clk_usb1_init,
+ },
+};
+
+static struct of_device_id clkc_ids[] = {
+ { .compatible = "sirf,prima2-clkc" },
+ {},
+};
+
+static struct of_device_id rsc_ids[] = {
+ { .compatible = "sirf,prima2-rsc" },
+ {},
+};
+
+void __init sirfsoc_of_clk_init(void)
+{
+ struct clk *clk;
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, clkc_ids);
+ if (!np)
+ panic("unable to find compatible clkc node in dtb\n");
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
+
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, rsc_ids);
+ if (!np)
+ panic("unable to find compatible rsc node in dtb\n");
+
+ sirfsoc_rsc_vbase = of_iomap(np, 0);
+ if (!sirfsoc_rsc_vbase)
+ panic("unable to map rsc registers\n");
+
+ of_node_put(np);
+
+
+ /* These are always available (RTC and 26MHz OSC)*/
+ clk = clk_register_fixed_rate(NULL, "rtc", NULL,
+ CLK_IS_ROOT, 32768);
+ BUG_ON(!clk);
+ clk = clk_register_fixed_rate(NULL, "osc", NULL,
+ CLK_IS_ROOT, 26000000);
+ BUG_ON(!clk);
+
+ clk = clk_register(NULL, &clk_pll1.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll2.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll3.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mem.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_sys.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_security.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b8030000.security");
+ clk = clk_register(NULL, &clk_dsp.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_gps.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a8010000.gps");
+ clk = clk_register(NULL, &clk_mf.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_io.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "io");
+ clk = clk_register(NULL, &clk_cpu.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "cpu");
+ clk = clk_register(NULL, &clk_uart0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0050000.uart");
+ clk = clk_register(NULL, &clk_uart1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0060000.uart");
+ clk = clk_register(NULL, &clk_uart2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0070000.uart");
+ clk = clk_register(NULL, &clk_tsc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0110000.tsc");
+ clk = clk_register(NULL, &clk_i2c0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.i2c");
+ clk = clk_register(NULL, &clk_i2c1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.i2c");
+ clk = clk_register(NULL, &clk_spi0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00d0000.spi");
+ clk = clk_register(NULL, &clk_spi1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0170000.spi");
+ clk = clk_register(NULL, &clk_pwmc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0130000.pwm");
+ clk = clk_register(NULL, &clk_efuse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0140000.efusesys");
+ clk = clk_register(NULL, &clk_pulse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0150000.pulsec");
+ clk = clk_register(NULL, &clk_dmac0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
+ clk = clk_register(NULL, &clk_dmac1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
+ clk = clk_register(NULL, &clk_nand.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0030000.nand");
+ clk = clk_register(NULL, &clk_audio.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0040000.audio");
+ clk = clk_register(NULL, &clk_usp0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0080000.usp");
+ clk = clk_register(NULL, &clk_usp1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0090000.usp");
+ clk = clk_register(NULL, &clk_usp2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00a0000.usp");
+ clk = clk_register(NULL, &clk_vip.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00c0000.vip");
+ clk = clk_register(NULL, &clk_gfx.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "98000000.graphics");
+ clk = clk_register(NULL, &clk_mm.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a0000000.multimedia");
+ clk = clk_register(NULL, &clk_lcd.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90010000.display");
+ clk = clk_register(NULL, &clk_vpp.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90020000.vpp");
+ clk = clk_register(NULL, &clk_mmc01.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc23.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc45.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &usb_pll_clk_hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_usb0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.usb");
+ clk = clk_register(NULL, &clk_usb1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.usb");
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index efdfd00..56e4495e 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -558,25 +558,6 @@
EXPORT_SYMBOL_GPL(clk_enable);
/**
- * clk_get_rate - return the rate of clk
- * @clk: the clk whose rate is being returned
- *
- * Simply returns the cached rate of the clk. Does not query the hardware. If
- * clk is NULL then returns 0.
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- mutex_lock(&prepare_lock);
- rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
-
- return rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/**
* __clk_round_rate - round the given rate for a clk
* @clk: round the rate of this clock
*
@@ -702,6 +683,30 @@
}
/**
+ * clk_get_rate - return the rate of clk
+ * @clk: the clk whose rate is being returned
+ *
+ * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
+ * is set, which means a recalc_rate will be issued.
+ * If clk is NULL then returns 0.
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ mutex_lock(&prepare_lock);
+
+ if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
+ __clk_recalc_rates(clk, 0);
+
+ rate = __clk_get_rate(clk);
+ mutex_unlock(&prepare_lock);
+
+ return rate;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+/**
* __clk_speculate_rates
* @clk: first clk in the subtree
* @parent_rate: the "future" rate of clk's parent
@@ -1582,6 +1587,20 @@
}
EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct clk_onecell_data *clk_data = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= clk_data->clk_num) {
+ pr_err("%s: invalid clock index %d\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clk_data->clks[idx];
+}
+EXPORT_SYMBOL_GPL(of_clk_src_onecell_get);
+
/**
* of_clk_add_provider() - Register a clock provider for a node
* @np: Device node pointer associated with clock provider
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
new file mode 100644
index 0000000..392d780
--- /dev/null
+++ b/drivers/clk/mmp/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for mmp specific clk
+#
+
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+
+obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/clk-apbc.c b/drivers/clk/mmp/clk-apbc.c
new file mode 100644
index 0000000..d14120e
--- /dev/null
+++ b/drivers/clk/mmp/clk-apbc.c
@@ -0,0 +1,152 @@
+/*
+ * mmp APB clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+#define APBC_POWER (1 << 7) /* Reset Generation */
+
+#define to_clk_apbc(hw) container_of(hw, struct clk_apbc, hw)
+struct clk_apbc {
+ struct clk_hw hw;
+ void __iomem *base;
+ unsigned int delay;
+ unsigned int flags;
+ spinlock_t *lock;
+};
+
+static int clk_apbc_prepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned int data;
+ unsigned long flags = 0;
+
+ /*
+ * It may share same register as MUX clock,
+ * and it will impact FNCLK enable. Spinlock is needed
+ */
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data |= APBC_POWER;
+ data |= APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data |= APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (!(apbc->flags & APBC_NO_BUS_CTRL)) {
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_RST;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+ }
+
+ return 0;
+}
+
+static void clk_apbc_unprepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data &= ~APBC_POWER;
+ data &= ~APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(10);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+}
+
+struct clk_ops clk_apbc_ops = {
+ .prepare = clk_apbc_prepare,
+ .unprepare = clk_apbc_unprepare,
+};
+
+struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name,
+ void __iomem *base, unsigned int delay,
+ unsigned int apbc_flags, spinlock_t *lock)
+{
+ struct clk_apbc *apbc;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apbc = kzalloc(sizeof(*apbc), GFP_KERNEL);
+ if (!apbc)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apbc_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apbc->base = base;
+ apbc->delay = delay;
+ apbc->flags = apbc_flags;
+ apbc->lock = lock;
+ apbc->hw.init = &init;
+
+ clk = clk_register(NULL, &apbc->hw);
+ if (IS_ERR(clk))
+ kfree(apbc);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-apmu.c b/drivers/clk/mmp/clk-apmu.c
new file mode 100644
index 0000000..abe182b
--- /dev/null
+++ b/drivers/clk/mmp/clk-apmu.c
@@ -0,0 +1,97 @@
+/*
+ * mmp AXI peripharal clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+#define to_clk_apmu(clk) (container_of(clk, struct clk_apmu, clk))
+struct clk_apmu {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 rst_mask;
+ u32 enable_mask;
+ spinlock_t *lock;
+};
+
+static int clk_apmu_enable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) | apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+
+ return 0;
+}
+
+static void clk_apmu_disable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) & ~apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+}
+
+struct clk_ops clk_apmu_ops = {
+ .enable = clk_apmu_enable,
+ .disable = clk_apmu_disable,
+};
+
+struct clk *mmp_clk_register_apmu(const char *name, const char *parent_name,
+ void __iomem *base, u32 enable_mask, spinlock_t *lock)
+{
+ struct clk_apmu *apmu;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apmu = kzalloc(sizeof(*apmu), GFP_KERNEL);
+ if (!apmu)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apmu_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apmu->base = base;
+ apmu->enable_mask = enable_mask;
+ apmu->lock = lock;
+ apmu->hw.init = &init;
+
+ clk = clk_register(NULL, &apmu->hw);
+
+ if (IS_ERR(clk))
+ kfree(apmu);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
new file mode 100644
index 0000000..80c1dd1
--- /dev/null
+++ b/drivers/clk/mmp/clk-frac.c
@@ -0,0 +1,153 @@
+/*
+ * mmp factor clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include "clk.h"
+/*
+ * It is M/N clock
+ *
+ * Fout from synthesizer can be given from two equations:
+ * numerator/denominator = Fin / (Fout * factor)
+ */
+
+#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw)
+struct clk_factor {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct clk_factor_masks *masks;
+ struct clk_factor_tbl *ftbl;
+ unsigned int ftbl_cnt;
+};
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ unsigned long rate = 0, prev_rate;
+ int i;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((*prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i == 0)
+ return rate;
+ else
+ return prev_rate;
+}
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ unsigned int val, num, den;
+
+ val = readl_relaxed(factor->base);
+
+ /* calculate numerator */
+ num = (val >> masks->num_shift) & masks->num_mask;
+
+ /* calculate denominator */
+ den = (val >> masks->den_shift) & masks->num_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * den) /
+ (num * factor->masks->factor)) * 10000;
+}
+
+/* Configures new clock rate*/
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ int i;
+ unsigned long val;
+ unsigned long prev_rate, rate = 0;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i > 0)
+ i--;
+
+ val = readl_relaxed(factor->base);
+
+ val &= ~(masks->num_mask << masks->num_shift);
+ val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+
+ val &= ~(masks->den_mask << masks->den_shift);
+ val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+
+ writel_relaxed(val, factor->base);
+
+ return 0;
+}
+
+static struct clk_ops clk_factor_ops = {
+ .recalc_rate = clk_factor_recalc_rate,
+ .round_rate = clk_factor_round_rate,
+ .set_rate = clk_factor_set_rate,
+};
+
+struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *base,
+ struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl,
+ unsigned int ftbl_cnt)
+{
+ struct clk_factor *factor;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!masks) {
+ pr_err("%s: must pass a clk_factor_mask\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ factor = kzalloc(sizeof(*factor), GFP_KERNEL);
+ if (!factor) {
+ pr_err("%s: could not allocate factor clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ factor->base = base;
+ factor->masks = masks;
+ factor->ftbl = ftbl;
+ factor->ftbl_cnt = ftbl_cnt;
+ factor->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_factor_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &factor->hw);
+ if (IS_ERR_OR_NULL(clk))
+ kfree(factor);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
new file mode 100644
index 0000000..ade4358
--- /dev/null
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -0,0 +1,449 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static const char *uart_parent[] = {"uart_pll", "vctcxo"};
+static const char *ssp_parent[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
+
+void __init mmp2_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *vctcxo;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ vctcxo = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(vctcxo, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 800000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "usb_pll", NULL, CLK_IS_ROOT,
+ 480000000);
+ clk_register_clkdev(clk, "usb_pll", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll2", NULL, CLK_IS_ROOT,
+ 960000000);
+ clk_register_clkdev(clk, "pll2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_20", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 5);
+ clk_register_clkdev(clk, "pll1_20", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3", "pll1",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_2", "pll2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_4", "pll2_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_8", "pll2_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_16", "pll2_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_3", "pll2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll2_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_6", "pll2_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_12", "pll2_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_2", "vctcxo",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_4", "vctcxo_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_4", NULL);
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(clk, 14745600);
+ clk_register_clkdev(clk, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "vctcxo",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "vctcxo",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("twsi2", "vctcxo",
+ apbc_base + APBC_TWSI2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.2");
+
+ clk = mmp_clk_register_apbc("twsi3", "vctcxo",
+ apbc_base + APBC_TWSI3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.3");
+
+ clk = mmp_clk_register_apbc("twsi4", "vctcxo",
+ apbc_base + APBC_TWSI4, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.4");
+
+ clk = mmp_clk_register_apbc("twsi5", "vctcxo",
+ apbc_base + APBC_TWSI5, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.5");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "vctcxo",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "vctcxo",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "vctcxo",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "vctcxo",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "uart3_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART3, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("uart3", "uart3_mux",
+ apbc_base + APBC_UART3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.3");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp2_mux",
+ apbc_base + APBC_SSP2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp3_mux",
+ apbc_base + APBC_SSP3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "sdh_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 8, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh_mux", NULL);
+
+ clk = clk_register_divider(NULL, "sdh_div", "sdh_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_SDH0,
+ 10, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "sdh_div", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_div", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.0");
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh_div", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.1");
+
+ clk = mmp_clk_register_apmu("sdh2", "sdh_div", apmu_base + APMU_SDH2,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.2");
+
+ clk = mmp_clk_register_apmu("sdh3", "sdh_div", apmu_base + APMU_SDH3,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.3");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "disp0_div", "disp0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP0,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_div",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_divider(NULL, "disp0_sphy_div", "disp0_mux", 0,
+ apmu_base + APMU_DISP0, 15, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0_sphy", "disp0_sphy_div",
+ apmu_base + APMU_DISP0, 0x1024, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy.0", NULL);
+
+ clk = clk_register_mux(NULL, "disp1_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "disp1_div", "disp1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP1,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("disp1", "disp1_div",
+ apmu_base + APMU_DISP1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.1");
+
+ clk = mmp_clk_register_apmu("ccic_arbiter", "vctcxo",
+ apmu_base + APMU_CCIC0, 0x1800, &clk_lock);
+ clk_register_clkdev(clk, "ccic_arbiter", NULL);
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "ccic0_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 17, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic1_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "ccic1_div", "ccic1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 16, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("ccic1", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_phy", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.1");
+
+ clk = clk_register_divider(NULL, "ccic1_sphy_div", "ccic1_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_sphy", "ccic1_sphy_div",
+ apmu_base + APMU_CCIC1, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.1");
+}
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
new file mode 100644
index 0000000..e8d036c
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -0,0 +1,346 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x81c
+#define APBC_SSP1 0x820
+#define APBC_SSP2 0x84c
+#define APBC_SSP3 0x858
+#define APBC_SSP4 0x85c
+#define APBC_TWSI1 0x6c
+#define APBC_UART2 0x70
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa168_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.4", NULL);
+
+ clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.4");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC,
+ 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB,
+ 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-disp.0");
+
+ clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "hclk", "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
new file mode 100644
index 0000000..7048c31
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -0,0 +1,320 @@
+/*
+ * pxa910 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x18
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_SSP2 0x4c
+#define APBCP_TWSI1 0x28
+#define APBCP_UART2 0x1c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa910_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbcp_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+ if (apbcp_base == NULL) {
+ pr_err("error to ioremap APBC extension base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbcp_base + APBCP_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbcp_base + APBCP_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbcp_base + APBCP_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4",
+ apmu_base + APMU_DFC, 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux",
+ apmu_base + APMU_SDH0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux",
+ apmu_base + APMU_SDH1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll",
+ apmu_base + APMU_USB, 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll",
+ apmu_base + APMU_USB, 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
new file mode 100644
index 0000000..ab86dd4
--- /dev/null
+++ b/drivers/clk/mmp/clk.h
@@ -0,0 +1,35 @@
+#ifndef __MACH_MMP_CLK_H
+#define __MACH_MMP_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define APBC_NO_BUS_CTRL BIT(0)
+#define APBC_POWER_CTRL BIT(1)
+
+struct clk_factor_masks {
+ unsigned int factor;
+ unsigned int num_mask;
+ unsigned int den_mask;
+ unsigned int num_shift;
+ unsigned int den_shift;
+};
+
+struct clk_factor_tbl {
+ unsigned int num;
+ unsigned int den;
+};
+
+extern struct clk *mmp_clk_register_pll2(const char *name,
+ const char *parent_name, unsigned long flags);
+extern struct clk *mmp_clk_register_apbc(const char *name,
+ const char *parent_name, void __iomem *base,
+ unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
+extern struct clk *mmp_clk_register_apmu(const char *name,
+ const char *parent_name, void __iomem *base, u32 enable_mask,
+ spinlock_t *lock);
+extern struct clk *mmp_clk_register_factor(const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *base, struct clk_factor_masks *masks,
+ struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+#endif
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
new file mode 100644
index 0000000..858fbfe
--- /dev/null
+++ b/drivers/clk/ux500/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for ux500 clocks
+#
+
+# Clock types
+obj-y += clk-prcc.o
+obj-y += clk-prcmu.o
+
+# Clock definitions
+obj-y += u8500_clk.o
+obj-y += u9540_clk.o
+obj-y += u8540_clk.o
diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c
new file mode 100644
index 0000000..7eee7f7
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcc.c
@@ -0,0 +1,164 @@
+/*
+ * PRCC clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <mach/hardware.h>
+
+#include "clk.h"
+
+#define PRCC_PCKEN 0x000
+#define PRCC_PCKDIS 0x004
+#define PRCC_KCKEN 0x008
+#define PRCC_KCKDIS 0x00C
+#define PRCC_PCKSR 0x010
+#define PRCC_KCKSR 0x014
+
+#define to_clk_prcc(_hw) container_of(_hw, struct clk_prcc, hw)
+
+struct clk_prcc {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 cg_sel;
+ int is_enabled;
+};
+
+/* PRCC clock operations. */
+
+static int clk_prcc_pclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKEN));
+ while (!(readl(clk->base + PRCC_PCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_pclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_kclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKEN));
+ while (!(readl(clk->base + PRCC_KCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_kclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+ return clk->is_enabled;
+}
+
+static struct clk_ops clk_prcc_pclk_ops = {
+ .enable = clk_prcc_pclk_enable,
+ .disable = clk_prcc_pclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk_ops clk_prcc_kclk_ops = {
+ .enable = clk_prcc_kclk_enable,
+ .disable = clk_prcc_kclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk *clk_reg_prcc(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags,
+ struct clk_ops *clk_prcc_ops)
+{
+ struct clk_prcc *clk;
+ struct clk_init_data clk_prcc_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcc: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcc), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcc: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->base = ioremap(phy_base, SZ_4K);
+ if (!clk->base)
+ goto free_clk;
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+
+ clk_prcc_init.name = name;
+ clk_prcc_init.ops = clk_prcc_ops;
+ clk_prcc_init.flags = flags;
+ clk_prcc_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcc_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcc_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto unmap_clk;
+
+ return clk_reg;
+
+unmap_clk:
+ iounmap(clk->base);
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcc: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_pclk_ops);
+}
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_kclk_ops);
+}
diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
new file mode 100644
index 0000000..930cdfe
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -0,0 +1,252 @@
+/*
+ * PRCMU clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw)
+
+struct clk_prcmu {
+ struct clk_hw hw;
+ u8 cg_sel;
+ int is_enabled;
+};
+
+/* PRCMU clock operations. */
+
+static int clk_prcmu_prepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_request_clock(clk->cg_sel, true);
+}
+
+static void clk_prcmu_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ if (prcmu_request_clock(clk->cg_sel, false))
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static int clk_prcmu_enable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcmu_disable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 0;
+}
+
+static int clk_prcmu_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_enabled;
+}
+
+static unsigned long clk_prcmu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_clock_rate(clk->cg_sel);
+}
+
+static long clk_prcmu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_round_clock_rate(clk->cg_sel, rate);
+}
+
+static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_set_clock_rate(clk->cg_sel, rate);
+}
+
+static int request_ape_opp100(bool enable)
+{
+ static int reqs;
+ int err = 0;
+
+ if (enable) {
+ if (!reqs)
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ "clock", 100);
+ if (!err)
+ reqs++;
+ } else {
+ reqs--;
+ if (!reqs)
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ "clock");
+ }
+ return err;
+}
+
+static int clk_prcmu_opp_prepare(struct clk_hw *hw)
+{
+ int err;
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ err = request_ape_opp100(true);
+ if (err) {
+ pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
+ __func__, hw->init->name);
+ return err;
+ }
+
+ err = prcmu_request_clock(clk->cg_sel, true);
+ if (err)
+ request_ape_opp100(false);
+
+ return err;
+}
+
+static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ if (prcmu_request_clock(clk->cg_sel, false))
+ goto out_error;
+ if (request_ape_opp100(false))
+ goto out_error;
+ return;
+
+out_error:
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static struct clk_ops clk_prcmu_scalable_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+ .round_rate = clk_prcmu_round_rate,
+ .set_rate = clk_prcmu_set_rate,
+};
+
+static struct clk_ops clk_prcmu_gate_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_rate_ops = {
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_opp_gate_ops = {
+ .prepare = clk_prcmu_opp_prepare,
+ .unprepare = clk_prcmu_opp_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk *clk_reg_prcmu(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags,
+ struct clk_ops *clk_prcmu_ops)
+{
+ struct clk_prcmu *clk;
+ struct clk_init_data clk_prcmu_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcmu: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcmu), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcmu: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+ /* "rate" can be used for changing the initial frequency */
+ if (rate)
+ prcmu_set_clock_rate(cg_sel, rate);
+
+ clk_prcmu_init.name = name;
+ clk_prcmu_init.ops = clk_prcmu_ops;
+ clk_prcmu_init.flags = flags;
+ clk_prcmu_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcmu_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcmu_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto free_clk;
+
+ return clk_reg;
+
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcmu: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+ &clk_prcmu_scalable_ops);
+}
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_gate_ops);
+}
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_rate_ops);
+}
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_opp_gate_ops);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
new file mode 100644
index 0000000..836d7d1
--- /dev/null
+++ b/drivers/clk/ux500/clk.h
@@ -0,0 +1,48 @@
+/*
+ * Clocks for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __UX500_CLK_H
+#define __UX500_CLK_H
+
+#include <linux/clk.h>
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+#endif /* __UX500_CLK_H */
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
new file mode 100644
index 0000000..ca4a25e
--- /dev/null
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -0,0 +1,477 @@
+/*
+ * Clock definitions for u8500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8500_clk_init(void)
+{
+ struct prcmu_fw_version *fw_version;
+ const char *sgaclk_parent = NULL;
+ struct clk *clk;
+
+ /* Clock sources */
+ clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc0_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc1_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "ddr_pll", NULL);
+
+ /* FIXME: Add sys, ulp and int clocks here. */
+
+ clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+ 32768);
+ clk_register_clkdev(clk, "clk32k", NULL);
+ clk_register_clkdev(clk, NULL, "rtc-pl031");
+
+ /* PRCMU clocks */
+ fw_version = prcmu_get_fw_version();
+ if (fw_version != NULL) {
+ switch (fw_version->project) {
+ case PRCMU_FW_PROJECT_U8500_C2:
+ case PRCMU_FW_PROJECT_U8520:
+ case PRCMU_FW_PROJECT_U8420:
+ sgaclk_parent = "soc0_pll";
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (sgaclk_parent)
+ clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
+ PRCMU_SGACLK, 0);
+ else
+ clk = clk_reg_prcmu_gate("sgclk", NULL,
+ PRCMU_SGACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mali");
+
+ clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "UART");
+
+ clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP02");
+
+ clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP1");
+
+ clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "I2C");
+
+ clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "slim");
+
+ clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH1");
+
+ clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH2");
+
+ clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH3");
+
+ clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH5");
+
+ clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH6");
+
+ clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH7");
+
+ clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "lcd");
+ clk_register_clkdev(clk, "lcd", "mcde");
+
+ clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "bml");
+
+ clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "hdmi");
+ clk_register_clkdev(clk, "hdmi", "mcde");
+
+ clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apeat");
+
+ clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apetrace");
+
+ clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mcde");
+ clk_register_clkdev(clk, "mcde", "mcde");
+ clk_register_clkdev(clk, "dsisys", "dsilink.0");
+ clk_register_clkdev(clk, "dsisys", "dsilink.1");
+ clk_register_clkdev(clk, "dsisys", "dsilink.2");
+
+ clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "ipi2");
+
+ clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dsialt");
+
+ clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dma40.0");
+
+ clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "b2r2");
+ clk_register_clkdev(clk, NULL, "b2r2_core");
+ clk_register_clkdev(clk, NULL, "U8500-B2R2.0");
+
+ clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "tv");
+ clk_register_clkdev(clk, "tv", "mcde");
+
+ clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "SSP");
+
+ clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "rngclk");
+
+ clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "uicc");
+
+ /*
+ * FIXME: The MTU clocks might need some kind of "parent muxed join"
+ * and these have no K-clocks. For now, we ignore the missing
+ * connection to the corresponding P-clocks, p6_mtu0_clk and
+ * p6_mtu1_clk. Instead timclk is used which is the valid parent.
+ */
+ clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "sdmmc");
+
+
+ clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+ PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs2", "mcde");
+ clk_register_clkdev(clk, "dsihs2", "dsilink.2");
+
+
+ clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+ PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs0", "mcde");
+ clk_register_clkdev(clk, "dsihs0", "dsilink.0");
+
+ clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+ PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs1", "mcde");
+ clk_register_clkdev(clk, "dsihs1", "dsilink.1");
+
+ clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+ PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp0", "dsilink.0");
+ clk_register_clkdev(clk, "dsilp0", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+ PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp1", "dsilink.1");
+ clk_register_clkdev(clk, "dsilp1", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+ PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp2", "dsilink.2");
+ clk_register_clkdev(clk, "dsilp2", "mcde");
+
+ clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS,
+ CLK_IS_ROOT|CLK_GET_RATE_NOCACHE|
+ CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, NULL, "smp_twd");
+
+ /*
+ * FIXME: Add special handled PRCMU clocks here:
+ * 1. clk_arm, use PRCMU_ARMCLK.
+ * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+ * 3. ab9540_clkout1yuv, see clkout0yuv
+ */
+
+ /* PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
+ BIT(3), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
+ BIT(4), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
+ BIT(6), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, NULL, "spi3");
+
+ clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
+ BIT(8), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpioblock0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
+ BIT(10), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "spi2");
+
+ clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "spi1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pwl");
+
+ clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi4");
+
+ clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi1");
+
+
+ clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi3");
+
+ clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "spi0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+ clk_register_clkdev(clk, NULL, "gpio.6");
+ clk_register_clkdev(clk, NULL, "gpio.7");
+ clk_register_clkdev(clk, NULL, "gpioblock1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, NULL, "fsmc");
+
+ clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
+ BIT(1), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
+ BIT(3), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi5");
+
+ clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "gpio.4");
+ clk_register_clkdev(clk, NULL, "gpio.5");
+ clk_register_clkdev(clk, NULL, "gpioblock2");
+
+ clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "usb", "musb-ux500.0");
+
+ clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "gpio.8");
+ clk_register_clkdev(clk, NULL, "gpioblock3");
+
+ clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "cryp0");
+ clk_register_clkdev(clk, NULL, "cryp1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "hash0");
+
+ clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pka");
+
+ clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, NULL, "hash1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, NULL, "cfgreg");
+
+ clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
+ BIT(6), 0);
+ clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
+ BIT(7), 0);
+
+ /* PRCC K-clocks
+ *
+ * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
+ * by enabling just the K-clock, even if it is not a valid parent to
+ * the K-clock. Until drivers get fixed we might need some kind of
+ * "parent muxed join".
+ */
+
+ /* Periph1 */
+ clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart0");
+
+ clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart1");
+
+ clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
+ U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi0");
+
+ clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ /* FIXME: Redefinition of BIT(3). */
+ clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+
+ /* Periph2 */
+ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+ U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi4");
+
+ clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+ U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi1");
+
+ clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi3");
+
+ /* Note that rate is received from parent. */
+ clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+ U8500_CLKRST2_BASE, BIT(6),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+ clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+ U8500_CLKRST2_BASE, BIT(7),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+
+ /* Periph3 */
+ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+ U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi2");
+
+ clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+ U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+ U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart2");
+
+ clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi5");
+
+ /* Periph6 */
+ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
+ U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+}
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
new file mode 100644
index 0000000..10adfd2
--- /dev/null
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u8540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8540_clk_init(void)
+{
+ /* register clocks here */
+}
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
new file mode 100644
index 0000000..dbc0191
--- /dev/null
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u9540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u9540_clk_init(void)
+{
+ /* register clocks here */
+}
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 50cf6a2..c0a0f64 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,3 +1,4 @@
# Makefile for Versatile-specific clocks
obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
new file mode 100644
index 0000000..e21a99c
--- /dev/null
+++ b/drivers/clk/versatile/clk-realview.c
@@ -0,0 +1,114 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(sys_vcoreg);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+static void realview_oscvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(sys_vcoreg) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, sys_lock);
+ writel(val, sys_vcoreg);
+ /* This locks the CM again */
+ writel(0, sys_lock);
+}
+
+static const struct icst_params realview_oscvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST307_VCO_MAX,
+ .vco_min = ICST307_VCO_MIN,
+ .vd_min = 4 + 8,
+ .vd_max = 511 + 8,
+ .rd_min = 1 + 2,
+ .rd_max = 127 + 2,
+ .s2div = icst307_s2div,
+ .idx2s = icst307_idx2s,
+};
+
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+ .params = &realview_oscvco_params,
+ .getvco = realview_oscvco_get,
+ .setvco = realview_oscvco_set,
+};
+
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+ struct clk *clk;
+
+ sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+ if (is_pb1176)
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+ else
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "dev:uart0");
+ clk_register_clkdev(clk, NULL, "dev:uart1");
+ clk_register_clkdev(clk, NULL, "dev:uart2");
+ clk_register_clkdev(clk, NULL, "fpga:kmi0");
+ clk_register_clkdev(clk, NULL, "fpga:kmi1");
+ clk_register_clkdev(clk, NULL, "fpga:mmc0");
+ clk_register_clkdev(clk, NULL, "dev:ssp0");
+ if (is_pb1176) {
+ /*
+ * UART3 is on the dev chip in PB1176
+ * UART4 only exists in PB1176
+ */
+ clk_register_clkdev(clk, NULL, "dev:uart3");
+ clk_register_clkdev(clk, NULL, "dev:uart4");
+ } else
+ clk_register_clkdev(clk, NULL, "fpga:uart3");
+
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock */
+ clk = icst_clk_register(NULL, &realview_icst_desc);
+ clk_register_clkdev(clk, NULL, "dev:clcd");
+ clk_register_clkdev(clk, NULL, "issp:clcd");
+}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 7040a00..6b37e2d 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -418,6 +418,9 @@
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+/* Functions definition */
+static void compute_armss_rate(void);
+
/* Spinlocks */
static DEFINE_SPINLOCK(prcmu_lock);
static DEFINE_SPINLOCK(clkout_lock);
@@ -517,6 +520,7 @@
}
};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
@@ -1013,6 +1017,7 @@
(mb1_transfer.ack.arm_opp != opp))
r = -EIO;
+ compute_armss_rate();
mutex_unlock(&mb1_transfer.lock);
return r;
@@ -1612,6 +1617,7 @@
if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
(val & PRCM_PLL_FREQ_DIV2EN) &&
((reg == PRCM_PLLSOC0_FREQ) ||
+ (reg == PRCM_PLLARM_FREQ) ||
(reg == PRCM_PLLDDR_FREQ))))
div *= 2;
@@ -1661,6 +1667,39 @@
else
return 0;
}
+static unsigned long latest_armss_rate;
+static unsigned long armss_rate(void)
+{
+ return latest_armss_rate;
+}
+
+static void compute_armss_rate(void)
+{
+ u32 r;
+ unsigned long rate;
+
+ r = readl(PRCM_ARM_CHGCLKREQ);
+
+ if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
+ /* External ARMCLKFIX clock */
+
+ rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
+
+ /* Check PRCM_ARM_CHGCLKREQ divider */
+ if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
+ rate /= 2;
+
+ /* Check PRCM_ARMCLKFIX_MGT divider */
+ r = readl(PRCM_ARMCLKFIX_MGT);
+ r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ rate /= r;
+
+ } else {/* ARM PLL */
+ rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
+ }
+
+ latest_armss_rate = rate;
+}
static unsigned long dsiclk_rate(u8 n)
{
@@ -1707,6 +1746,8 @@
return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLSOC1)
return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_ARMSS)
+ return armss_rate();
else if (clock == PRCMU_PLLDDR)
return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLDSI)
@@ -2693,6 +2734,7 @@
handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+ compute_armss_rate();
}
static void __init init_prcm_registers(void)
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 23108a6..79c76eb 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -61,7 +61,8 @@
#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16)
#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
@@ -140,6 +141,7 @@
/* PRCMU clock/PLL/reset registers */
#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080)
#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088)
#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C)
#define PRCM_PLL_FREQ_D_SHIFT 0
#define PRCM_PLL_FREQ_D_MASK BITS(0, 7)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 77335fa..c127315 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -26,6 +26,7 @@
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
struct clk_hw;
@@ -360,6 +361,11 @@
void of_clk_del_provider(struct device_node *np);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
void *data);
+struct clk_onecell_data {
+ struct clk **clks;
+ unsigned int clk_num;
+};
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
const char *of_clk_get_parent_name(struct device_node *np, int index);
void of_clk_init(const struct of_device_id *matches);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 5b90e94..c410d99 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -136,6 +136,7 @@
PRCMU_TIMCLK,
PRCMU_PLLSOC0,
PRCMU_PLLSOC1,
+ PRCMU_ARMSS,
PRCMU_PLLDDR,
PRCMU_PLLDSI,
PRCMU_DSI0CLK,
diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h
new file mode 100644
index 0000000..2e426a7
--- /dev/null
+++ b/include/linux/platform_data/clk-realview.h
@@ -0,0 +1 @@
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
new file mode 100644
index 0000000..3af0da1
--- /dev/null
+++ b/include/linux/platform_data/clk-ux500.h
@@ -0,0 +1,17 @@
+/*
+ * Clock definitions for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __CLK_UX500_H
+#define __CLK_UX500_H
+
+void u8500_clk_init(void);
+void u9540_clk_init(void);
+void u8540_clk_init(void);
+
+#endif /* __CLK_UX500_H */