cfg80211: add start / stop NAN commands
This allows user space to start/stop NAN interface.
A NAN interface is like P2P device in a few aspects: it
doesn't have a netdev associated to it.
Add the new interface type and prevent operations that
can't be executed on NAN interface like scan.
Define several attributes that may be configured by user space
when starting NAN functionality (master preference and dual
band operation)
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 68dca3d..9898e1f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2314,6 +2314,19 @@
};
/**
+ * struct cfg80211_nan_conf - NAN configuration
+ *
+ * This struct defines NAN configuration parameters
+ *
+ * @master_pref: master preference (1 - 255)
+ * @dual: dual band operation mode, see &enum nl80211_nan_dual_band_conf
+ */
+struct cfg80211_nan_conf {
+ u8 master_pref;
+ u8 dual;
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -2601,6 +2614,8 @@
* and returning to the base channel for communication with the AP.
* @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
* peers must be on the base channel when the call completes.
+ * @start_nan: Start the NAN interface.
+ * @stop_nan: Stop the NAN interface.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2866,6 +2881,9 @@
void (*tdls_cancel_channel_switch)(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr);
+ int (*start_nan)(struct wiphy *wiphy, struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf);
+ void (*stop_nan)(struct wiphy *wiphy, struct wireless_dev *wdev);
};
/*
@@ -3626,6 +3644,7 @@
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
* @p2p_started: true if this is a P2P Device that has been started
+ * @nan_started: true if this is a NAN interface that has been started
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
* @cac_time_ms: CAC time in ms
@@ -3657,7 +3676,7 @@
struct mutex mtx;
- bool use_4addr, p2p_started;
+ bool use_4addr, p2p_started, nan_started;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index ec10d1b..98fd3ec 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -838,6 +838,16 @@
* not running. The driver indicates the status of the scan through
* cfg80211_scan_done().
*
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+ * %NL80211_ATTR_WDEV interface. This interface must have been previously
+ * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
+ * NAN interface will create or join a cluster. This command must have a
+ * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ * %NL80211_ATTR_NAN_DUAL attributes.
+ * After this command NAN functions can be added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ * its %NL80211_ATTR_WDEV interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1026,6 +1036,9 @@
NL80211_CMD_ABORT_SCAN,
+ NL80211_CMD_START_NAN,
+ NL80211_CMD_STOP_NAN,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1739,6 +1752,12 @@
* regulatory indoor configuration would be owned by the netlink socket
* that configured the indoor setting, and the indoor operation would be
* cleared when the socket is closed.
+ * If set during NAN interface creation, the interface will be destroyed
+ * if the socket is closed just like any other interface. Moreover, only
+ * the netlink socket that created the interface will be allowed to add
+ * and remove functions. NAN notifications will be sent in unicast to that
+ * socket. Without this attribute, any socket can add functions and the
+ * notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
@@ -1873,6 +1892,14 @@
* @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
* used to pull the stored data for mesh peer in power save state.
*
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
+ * %NL80211_CMD_START_NAN. Its type is u8 and it can't be 0.
+ * Also, values 1 and 255 are reserved for certification purposes and
+ * should not be used during a normal device operation.
+ * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
+ * &enum nl80211_nan_dual_band_conf). This attribute is used with
+ * %NL80211_CMD_START_NAN.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2267,6 +2294,9 @@
NL80211_ATTR_MESH_PEER_AID,
+ NL80211_ATTR_NAN_MASTER_PREF,
+ NL80211_ATTR_NAN_DUAL,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2345,6 +2375,7 @@
* commands to create and destroy one
* @NL80211_IF_TYPE_OCB: Outside Context of a BSS
* This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -2365,6 +2396,7 @@
NL80211_IFTYPE_P2P_GO,
NL80211_IFTYPE_P2P_DEVICE,
NL80211_IFTYPE_OCB,
+ NL80211_IFTYPE_NAN,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -4870,4 +4902,19 @@
NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
};
+/**
+ * enum nl80211_nan_dual_band_conf - NAN dual band configuration
+ *
+ * Defines the NAN dual band mode of operation
+ *
+ * @NL80211_NAN_BAND_DEFAULT: device default mode
+ * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
+ * @NL80211_NAN_BAND_5GHZ: 5GHz mode
+ */
+enum nl80211_nan_dual_band_conf {
+ NL80211_NAN_BAND_DEFAULT = 1 << 0,
+ NL80211_NAN_BAND_2GHZ = 1 << 1,
+ NL80211_NAN_BAND_5GHZ = 1 << 2,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index e29ff57..a74027f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -257,6 +257,7 @@
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
@@ -2036,6 +2037,7 @@
!(req->flags & NL80211_SCAN_FLAG_AP)))
return -EOPNOTSUPP;
break;
+ case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 74142d0..d035801 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -274,6 +274,7 @@
ieee80211_get_max_required_bw(sdata));
break;
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
continue;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
@@ -718,6 +719,7 @@
switch (sdata->vif.type) {
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
continue;
case NL80211_IFTYPE_STATION:
if (!sdata->u.mgd.associated)
@@ -980,6 +982,7 @@
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
case NUM_NL80211_IFTYPES:
WARN_ON(1);
break;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index b0abddc7..e694ca2 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -545,6 +545,7 @@
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_OCB:
+ case NL80211_IFTYPE_NAN:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
@@ -660,6 +661,7 @@
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
break;
default:
/* not reached */
@@ -948,6 +950,7 @@
/* relies on synchronize_rcu() below */
RCU_INIT_POINTER(local->p2p_sdata, NULL);
/* fall through */
+ case NL80211_IFTYPE_NAN:
default:
cancel_work_sync(&sdata->work);
/*
@@ -1457,6 +1460,7 @@
break;
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
sdata->vif.bss_conf.bssid = sdata->vif.addr;
break;
case NL80211_IFTYPE_UNSPECIFIED:
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 55a9c5b..75d5c96 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -838,6 +838,7 @@
case NL80211_IFTYPE_P2P_DEVICE:
need_offchan = true;
break;
+ case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index e796060..c9489a8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3586,6 +3586,9 @@
ieee80211_is_probe_req(hdr->frame_control) ||
ieee80211_is_probe_resp(hdr->frame_control) ||
ieee80211_is_beacon(hdr->frame_control);
+ case NL80211_IFTYPE_NAN:
+ /* Currently no frames on NAN interface are allowed */
+ return false;
default:
break;
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index b6865d8..2c78541 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1975,6 +1975,7 @@
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
/* nothing to do */
break;
case NL80211_IFTYPE_UNSPECIFIED:
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 0f50622..5497d022 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -372,6 +372,7 @@
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
@@ -946,6 +947,7 @@
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
/* these interface types don't really have a channel */
return;
case NL80211_IFTYPE_UNSPECIFIED:
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 4911cd9..0139872 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -225,6 +225,23 @@
}
}
+void cfg80211_stop_nan(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ ASSERT_RTNL();
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_NAN))
+ return;
+
+ if (!wdev->nan_started)
+ return;
+
+ rdev_stop_nan(rdev, wdev);
+ wdev->nan_started = false;
+
+ rdev->opencount--;
+}
+
void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
@@ -242,6 +259,9 @@
case NL80211_IFTYPE_P2P_DEVICE:
cfg80211_stop_p2p_device(rdev, wdev);
break;
+ case NL80211_IFTYPE_NAN:
+ cfg80211_stop_nan(rdev, wdev);
+ break;
default:
break;
}
@@ -537,6 +557,11 @@
c->limits[j].max > 1))
return -EINVAL;
+ /* Only a single NAN can be allowed */
+ if (WARN_ON(types & BIT(NL80211_IFTYPE_NAN) &&
+ c->limits[j].max > 1))
+ return -EINVAL;
+
cnt += c->limits[j].max;
/*
* Don't advertise an unsupported type
@@ -579,6 +604,10 @@
!rdev->ops->tdls_cancel_channel_switch)))
return -EINVAL;
+ if (WARN_ON((wiphy->interface_modes & BIT(NL80211_IFTYPE_NAN)) &&
+ (!rdev->ops->start_nan || !rdev->ops->stop_nan)))
+ return -EINVAL;
+
/*
* if a wiphy has unsupported modes for regulatory channel enforcement,
* opt-out of enforcement checking
@@ -589,6 +618,7 @@
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_NAN) |
BIT(NL80211_IFTYPE_AP_VLAN) |
BIT(NL80211_IFTYPE_MONITOR)))
wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF;
@@ -916,6 +946,9 @@
cfg80211_mlme_purge_registrations(wdev);
cfg80211_stop_p2p_device(rdev, wdev);
break;
+ case NL80211_IFTYPE_NAN:
+ cfg80211_stop_nan(rdev, wdev);
+ break;
default:
WARN_ON_ONCE(1);
break;
@@ -979,6 +1012,7 @@
/* must be handled by mac80211/driver, has no APIs */
break;
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
/* cannot happen, has no netdev */
break;
case NL80211_IFTYPE_AP_VLAN:
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 554f87d..08d2e94 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -488,6 +488,9 @@
void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev);
+void cfg80211_stop_nan(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index d6abb07..cbb48e2 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -634,6 +634,7 @@
* fall through, P2P device only supports
* public action frames
*/
+ case NL80211_IFTYPE_NAN:
default:
err = -EOPNOTSUPP;
break;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b8441e6..9e9fb37 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -409,6 +409,8 @@
.len = VHT_MUMIMO_GROUPS_DATA_LEN
},
[NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR] = { .len = ETH_ALEN },
+ [NL80211_ATTR_NAN_MASTER_PREF] = { .type = NLA_U8 },
+ [NL80211_ATTR_NAN_DUAL] = { .type = NLA_U8 },
};
/* policy for the key attributes */
@@ -934,6 +936,7 @@
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_WDS:
case NUM_NL80211_IFTYPES:
@@ -2819,7 +2822,7 @@
!(rdev->wiphy.interface_modes & (1 << type)))
return -EOPNOTSUPP;
- if ((type == NL80211_IFTYPE_P2P_DEVICE ||
+ if ((type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN ||
rdev->wiphy.features & NL80211_FEATURE_MAC_ON_CREATE) &&
info->attrs[NL80211_ATTR_MAC]) {
nla_memcpy(params.macaddr, info->attrs[NL80211_ATTR_MAC],
@@ -2875,9 +2878,10 @@
wdev->mesh_id_up_len);
wdev_unlock(wdev);
break;
+ case NL80211_IFTYPE_NAN:
case NL80211_IFTYPE_P2P_DEVICE:
/*
- * P2P Device doesn't have a netdev, so doesn't go
+ * P2P Device and NAN do not have a netdev, so don't go
* through the netdev notifier and must be added here
*/
mutex_init(&wdev->mtx);
@@ -6434,6 +6438,9 @@
wiphy = &rdev->wiphy;
+ if (wdev->iftype == NL80211_IFTYPE_NAN)
+ return -EOPNOTSUPP;
+
if (!rdev->ops->scan)
return -EOPNOTSUPP;
@@ -8977,6 +8984,7 @@
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_DEVICE:
break;
+ case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
@@ -9022,6 +9030,7 @@
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_GO:
break;
+ case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
@@ -9138,6 +9147,7 @@
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_P2P_DEVICE:
break;
+ case NL80211_IFTYPE_NAN:
default:
return -EOPNOTSUPP;
}
@@ -10504,6 +10514,58 @@
return 0;
}
+static int nl80211_start_nan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+ struct cfg80211_nan_conf conf = {};
+ int err;
+
+ if (wdev->iftype != NL80211_IFTYPE_NAN)
+ return -EOPNOTSUPP;
+
+ if (wdev->nan_started)
+ return -EEXIST;
+
+ if (rfkill_blocked(rdev->rfkill))
+ return -ERFKILL;
+
+ if (!info->attrs[NL80211_ATTR_NAN_MASTER_PREF])
+ return -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_NAN_DUAL])
+ return -EINVAL;
+
+ conf.master_pref =
+ nla_get_u8(info->attrs[NL80211_ATTR_NAN_MASTER_PREF]);
+ if (!conf.master_pref)
+ return -EINVAL;
+
+ conf.dual = nla_get_u8(info->attrs[NL80211_ATTR_NAN_DUAL]);
+
+ err = rdev_start_nan(rdev, wdev, &conf);
+ if (err)
+ return err;
+
+ wdev->nan_started = true;
+ rdev->opencount++;
+
+ return 0;
+}
+
+static int nl80211_stop_nan(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev = info->user_ptr[1];
+
+ if (wdev->iftype != NL80211_IFTYPE_NAN)
+ return -EOPNOTSUPP;
+
+ cfg80211_stop_nan(rdev, wdev);
+
+ return 0;
+}
+
static int nl80211_get_protocol_features(struct sk_buff *skb,
struct genl_info *info)
{
@@ -11205,7 +11267,14 @@
dev_hold(dev);
} else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
- if (!wdev->p2p_started) {
+ if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE &&
+ !wdev->p2p_started) {
+ if (rtnl)
+ rtnl_unlock();
+ return -ENETDOWN;
+ }
+ if (wdev->iftype == NL80211_IFTYPE_NAN &&
+ !wdev->nan_started) {
if (rtnl)
rtnl_unlock();
return -ENETDOWN;
@@ -11839,6 +11908,22 @@
NL80211_FLAG_NEED_RTNL,
},
{
+ .cmd = NL80211_CMD_START_NAN,
+ .doit = nl80211_start_nan,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_STOP_NAN,
+ .doit = nl80211_stop_nan,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
.cmd = NL80211_CMD_SET_MCAST_RATE,
.doit = nl80211_set_mcast_rate,
.policy = nl80211_policy,
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 85ff30b..afb68a8 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -887,6 +887,26 @@
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int rdev_start_nan(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf)
+{
+ int ret;
+
+ trace_rdev_start_nan(&rdev->wiphy, wdev, conf);
+ ret = rdev->ops->start_nan(&rdev->wiphy, wdev, conf);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
+static inline void rdev_stop_nan(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ trace_rdev_stop_nan(&rdev->wiphy, wdev);
+ rdev->ops->stop_nan(&rdev->wiphy, wdev);
+ trace_rdev_return_void(&rdev->wiphy);
+}
+
static inline int rdev_set_mac_acl(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_acl_data *params)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 72b5255..5f3370f 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1889,6 +1889,33 @@
TP_ARGS(wiphy, wdev)
);
+TRACE_EVENT(rdev_start_nan,
+ TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev,
+ struct cfg80211_nan_conf *conf),
+ TP_ARGS(wiphy, wdev, conf),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ WDEV_ENTRY
+ __field(u8, master_pref)
+ __field(u8, dual);
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ WDEV_ASSIGN;
+ __entry->master_pref = conf->master_pref;
+ __entry->dual = conf->dual;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT
+ ", master preference: %u, dual: %d",
+ WIPHY_PR_ARG, WDEV_PR_ARG, __entry->master_pref,
+ __entry->dual)
+);
+
+DEFINE_EVENT(wiphy_wdev_evt, rdev_stop_nan,
+ TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev),
+ TP_ARGS(wiphy, wdev)
+);
+
TRACE_EVENT(rdev_set_mac_acl,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
struct cfg80211_acl_data *params),
diff --git a/net/wireless/util.c b/net/wireless/util.c
index e02141d..7a2d46b 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1008,8 +1008,9 @@
if (otype == NL80211_IFTYPE_AP_VLAN)
return -EOPNOTSUPP;
- /* cannot change into P2P device type */
- if (ntype == NL80211_IFTYPE_P2P_DEVICE)
+ /* cannot change into P2P device or NAN */
+ if (ntype == NL80211_IFTYPE_P2P_DEVICE ||
+ ntype == NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
if (!rdev->ops->change_virtual_intf ||
@@ -1088,6 +1089,7 @@
/* not happening */
break;
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_NAN:
WARN_ON(1);
break;
}