serial: sirf: use uart_port's fifosize for fifo related operation
In SiRF platform, there are different fifo size of uart and usp,
with the fifosize configuration changes in different chips, we
can not use port line to decide how to check FIFO full,empty and
level.
There is a direct mapping between FIFO HW register layout with
fifo size, so move to use fifosize as the input to check fifo
status.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index cd30ba9..af2f187 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -6,6 +6,7 @@
* Licensed under GPLv2 or later.
*/
#include <linux/bitops.h>
+#include <linux/log2.h>
struct sirfsoc_uart_param {
const char *uart_name;
const char *port_name;
@@ -43,8 +44,8 @@
u32 sirfsoc_async_param_reg;
};
-typedef u32 (*fifo_full_mask)(int line);
-typedef u32 (*fifo_empty_mask)(int line);
+typedef u32 (*fifo_full_mask)(struct uart_port *port);
+typedef u32 (*fifo_empty_mask)(struct uart_port *port);
struct sirfsoc_fifo_status {
fifo_full_mask ff_full;
@@ -103,21 +104,20 @@
enum sirfsoc_uart_type uart_type;
};
-u32 usp_ff_full(int line)
+u32 uart_usp_ff_full_mask(struct uart_port *port)
{
- return 0x80;
+ u32 full_bit;
+
+ full_bit = ilog2(port->fifosize);
+ return (1 << full_bit);
}
-u32 usp_ff_empty(int line)
+
+u32 uart_usp_ff_empty_mask(struct uart_port *port)
{
- return 0x100;
-}
-u32 uart_ff_full(int line)
-{
- return (line == 1) ? (0x20) : (0x80);
-}
-u32 uart_ff_empty(int line)
-{
- return (line == 1) ? (0x40) : (0x100);
+ u32 empty_bit;
+
+ empty_bit = ilog2(port->fifosize);
+ return (1 << empty_bit);
}
struct sirfsoc_uart_register sirfsoc_usp = {
.uart_reg = {
@@ -175,8 +175,8 @@
.sirfsoc_rxd_brk = BIT(15),
},
.fifo_status = {
- .ff_full = usp_ff_full,
- .ff_empty = usp_ff_empty,
+ .ff_full = uart_usp_ff_full_mask,
+ .ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
@@ -245,8 +245,8 @@
.sirfsoc_rts = BIT(15),
},
.fifo_status = {
- .ff_full = uart_ff_full,
- .ff_empty = uart_ff_empty,
+ .ff_full = uart_usp_ff_full_mask,
+ .ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
@@ -294,6 +294,7 @@
/* Macro Specific*/
#define SIRFUART_INT_EN_CLR 0x0060
/* Baud Rate Calculation */
+#define SIRF_USP_MIN_SAMPLE_DIV 0x1
#define SIRF_MIN_SAMPLE_DIV 0xf
#define SIRF_MAX_SAMPLE_DIV 0x3f
#define SIRF_IOCLK_DIV_MAX 0xffff
@@ -328,7 +329,7 @@
#define SIRFUART_RECV_TIMEOUT(port, x) \
(((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16)
-#define SIRFUART_FIFO_THD(port) ((port->line) == 1 ? 16 : 64)
+#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1)
#define SIRFUART_ERR_INT_STAT(port, unit_st) \
(uint_st->sirfsoc_rx_oflow | \
uint_st->sirfsoc_frm_err | \
@@ -365,10 +366,6 @@
/* Uart Common Use Macro*/
#define SIRFSOC_RX_DMA_BUF_SIZE 256
#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
-#define LOOP_DMA_BUFA_FILL 1
-#define LOOP_DMA_BUFB_FILL 2
-#define TX_TRAN_PIO 1
-#define TX_TRAN_DMA 2
/* Uart Fifo Level Chk */
#define SIRFUART_TX_FIFO_SC_OFFSET 0
#define SIRFUART_TX_FIFO_LC_OFFSET 10
@@ -437,10 +434,6 @@
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
/* UART Port Mask */
-#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f))
-#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80))
-#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100))
-
-/* I/O Mode */
-#define SIRFSOC_UART_IO_RX_MAX_CNT 256
-#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 256
+#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF)
+#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF)
+#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1)