aic7xxx: convert to SPI transport class Domain Validation
Now that we export all the parameters, this is easy to do.
It also means that we can dump about 2000 lines of code that
were dedicated to doing this internally.
Additionally, this removes all the aic7xxx driver abuse
of SCSI timers which were embedded in the DV routines.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 6b6ee0a..d74b99d 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -275,39 +275,6 @@
};
/*
- * DV option:
- *
- * positive value = DV Enabled
- * zero = DV Disabled
- * negative value = DV Default for adapter type/seeprom
- */
-#ifdef CONFIG_AIC7XXX_DV_SETTING
-#define AIC7XXX_CONFIGED_DV CONFIG_AIC7XXX_DV_SETTING
-#else
-#define AIC7XXX_CONFIGED_DV -1
-#endif
-
-static int8_t aic7xxx_dv_settings[] =
-{
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV,
- AIC7XXX_CONFIGED_DV
-};
-
-/*
* There should be a specific return value for this in scsi.h, but
* it seems that most drivers ignore it.
*/
@@ -454,7 +421,6 @@
" tag_info:<tag_str> Set per-target tag depth\n"
" global_tag_depth:<int> Global tag depth for every target\n"
" on every bus\n"
-" dv:<dv_settings> Set per-controller Domain Validation Setting.\n"
" seltime:<int> Selection Timeout\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
"\n"
@@ -471,7 +437,6 @@
struct scb *);
static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc,
Scsi_Cmnd *cmd);
-static void ahc_linux_filter_inquiry(struct ahc_softc*, struct ahc_devinfo*);
static void ahc_linux_sem_timeout(u_long arg);
static void ahc_linux_freeze_simq(struct ahc_softc *ahc);
static void ahc_linux_release_simq(u_long arg);
@@ -480,49 +445,8 @@
static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc);
static void ahc_linux_size_nseg(void);
static void ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc);
-static void ahc_linux_start_dv(struct ahc_softc *ahc);
-static void ahc_linux_dv_timeout(struct scsi_cmnd *cmd);
-static int ahc_linux_dv_thread(void *data);
-static void ahc_linux_kill_dv_thread(struct ahc_softc *ahc);
-static void ahc_linux_dv_target(struct ahc_softc *ahc, u_int target);
-static void ahc_linux_dv_transition(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ);
-static void ahc_linux_dv_fill_cmd(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_inq(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ,
- u_int request_length);
-static void ahc_linux_dv_tur(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_rebd(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ);
-static void ahc_linux_dv_web(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ);
-static void ahc_linux_dv_reb(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ);
-static void ahc_linux_dv_su(struct ahc_softc *ahc,
- struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ);
-static int ahc_linux_fallback(struct ahc_softc *ahc,
- struct ahc_devinfo *devinfo);
-static void ahc_linux_dv_complete(Scsi_Cmnd *cmd);
-static void ahc_linux_generate_dv_pattern(struct ahc_linux_target *targ);
static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
-static u_int ahc_linux_user_dv_setting(struct ahc_softc *ahc);
static void ahc_linux_device_queue_depth(struct ahc_softc *ahc,
struct ahc_linux_device *dev);
static struct ahc_linux_target* ahc_linux_alloc_target(struct ahc_softc*,
@@ -538,7 +462,6 @@
struct ahc_linux_device*);
static void ahc_linux_setup_tag_info_global(char *p);
static aic_option_callback_t ahc_linux_setup_tag_info;
-static aic_option_callback_t ahc_linux_setup_dv;
static int aic7xxx_setup(char *s);
static int ahc_linux_next_unit(void);
static void ahc_runq_tasklet(unsigned long data);
@@ -667,8 +590,7 @@
{
if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0
- || (ahc->platform_data->qfrozen != 0
- && AHC_DV_SIMQ_FROZEN(ahc) == 0))
+ || (ahc->platform_data->qfrozen != 0))
return (NULL);
return (TAILQ_FIRST(&ahc->platform_data->device_runq));
}
@@ -966,8 +888,7 @@
* DV commands through so long as we are only frozen to
* perform DV.
*/
- if (ahc->platform_data->qfrozen != 0
- && AHC_DV_CMD(cmd) == 0) {
+ if (ahc->platform_data->qfrozen != 0) {
ahc_cmd_set_transaction_status(cmd, CAM_REQUEUE_REQ);
ahc_linux_queue_cmd_complete(ahc, cmd);
@@ -1034,6 +955,11 @@
ahc_linux_device_queue_depth(ahc, dev);
}
ahc_midlayer_entrypoint_unlock(ahc, &flags);
+
+ /* Initial Domain Validation */
+ if (!spi_initial_dv(device->sdev_target))
+ spi_dv_device(device);
+
return (0);
}
@@ -1549,18 +1475,6 @@
}
}
-static void
-ahc_linux_setup_dv(u_long arg, int instance, int targ, int32_t value)
-{
-
- if ((instance >= 0)
- && (instance < NUM_ELEMENTS(aic7xxx_dv_settings))) {
- aic7xxx_dv_settings[instance] = value;
- if (bootverbose)
- printf("dv[%d] = %d\n", instance, value);
- }
-}
-
/*
* Handle Linux boot parameters. This routine allows for assigning a value
* to a parameter with a ':' between the parameter and the value.
@@ -1620,9 +1534,6 @@
} else if (strncmp(p, "tag_info", n) == 0) {
s = aic_parse_brace_option("tag_info", p + n, end,
2, ahc_linux_setup_tag_info, 0);
- } else if (strncmp(p, "dv", n) == 0) {
- s = aic_parse_brace_option("dv", p + n, end, 1,
- ahc_linux_setup_dv, 0);
} else if (p[n] == ':') {
*(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
} else if (strncmp(p, "verbose", n) == 0) {
@@ -1645,7 +1556,6 @@
struct Scsi_Host *host;
char *new_name;
u_long s;
- u_int targ_offset;
template->name = ahc->description;
host = scsi_host_alloc(template, sizeof(struct ahc_softc *));
@@ -1681,55 +1591,7 @@
scsi_set_pci_device(host, ahc->dev_softc);
#endif
ahc_linux_initialize_scsi_bus(ahc);
- ahc_unlock(ahc, &s);
- ahc->platform_data->dv_pid = kernel_thread(ahc_linux_dv_thread, ahc, 0);
- ahc_lock(ahc, &s);
- if (ahc->platform_data->dv_pid < 0) {
- printf("%s: Failed to create DV thread, error= %d\n",
- ahc_name(ahc), ahc->platform_data->dv_pid);
- return (-ahc->platform_data->dv_pid);
- }
- /*
- * Initially allocate *all* of our linux target objects
- * so that the DV thread will scan them all in parallel
- * just after driver initialization. Any device that
- * does not exist will have its target object destroyed
- * by the selection timeout handler. In the case of a
- * device that appears after the initial DV scan, async
- * negotiation will occur for the first command, and DV
- * will comence should that first command be successful.
- */
- for (targ_offset = 0;
- targ_offset < host->max_id * (host->max_channel + 1);
- targ_offset++) {
- u_int channel;
- u_int target;
-
- channel = 0;
- target = targ_offset;
- if (target > 7
- && (ahc->features & AHC_TWIN) != 0) {
- channel = 1;
- target &= 0x7;
- }
- /*
- * Skip our own ID. Some Compaq/HP storage devices
- * have enclosure management devices that respond to
- * single bit selection (i.e. selecting ourselves).
- * It is expected that either an external application
- * or a modified kernel will be used to probe this
- * ID if it is appropriate. To accommodate these
- * installations, ahc_linux_alloc_target() will allocate
- * for our ID if asked to do so.
- */
- if ((channel == 0 && target == ahc->our_id)
- || (channel == 1 && target == ahc->our_id_b))
- continue;
-
- ahc_linux_alloc_target(ahc, channel, target);
- }
ahc_intr_enable(ahc, TRUE);
- ahc_linux_start_dv(ahc);
ahc_unlock(ahc, &s);
host->transportt = ahc_linux_transport_template;
@@ -1866,8 +1728,6 @@
ahc->platform_data->completeq_timer.function =
(ahc_linux_callback_t *)ahc_linux_thread_run_complete_queue;
init_MUTEX_LOCKED(&ahc->platform_data->eh_sem);
- init_MUTEX_LOCKED(&ahc->platform_data->dv_sem);
- init_MUTEX_LOCKED(&ahc->platform_data->dv_cmd_sem);
tasklet_init(&ahc->platform_data->runq_tasklet, ahc_runq_tasklet,
(unsigned long)ahc);
ahc->seltime = (aic7xxx_seltime & 0x3) << 4;
@@ -1887,7 +1747,6 @@
if (ahc->platform_data != NULL) {
del_timer_sync(&ahc->platform_data->completeq_timer);
- ahc_linux_kill_dv_thread(ahc);
tasklet_kill(&ahc->platform_data->runq_tasklet);
if (ahc->platform_data->host != NULL) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
@@ -2126,1331 +1985,6 @@
ahc_unlock(ahc, &flags);
}
-static void
-ahc_linux_start_dv(struct ahc_softc *ahc)
-{
-
- /*
- * Freeze the simq and signal ahc_linux_queue to not let any
- * more commands through.
- */
- if ((ahc->platform_data->flags & AHC_DV_ACTIVE) == 0) {
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV)
- printf("%s: Waking DV thread\n", ahc_name(ahc));
-#endif
-
- ahc->platform_data->flags |= AHC_DV_ACTIVE;
- ahc_linux_freeze_simq(ahc);
-
- /* Wake up the DV kthread */
- up(&ahc->platform_data->dv_sem);
- }
-}
-
-static void
-ahc_linux_kill_dv_thread(struct ahc_softc *ahc)
-{
- u_long s;
-
- ahc_lock(ahc, &s);
- if (ahc->platform_data->dv_pid != 0) {
- ahc->platform_data->flags |= AHC_DV_SHUTDOWN;
- ahc_unlock(ahc, &s);
- up(&ahc->platform_data->dv_sem);
-
- /*
- * Use the eh_sem as an indicator that the
- * dv thread is exiting. Note that the dv
- * thread must still return after performing
- * the up on our semaphore before it has
- * completely exited this module. Unfortunately,
- * there seems to be no easy way to wait for the
- * exit of a thread for which you are not the
- * parent (dv threads are parented by init).
- * Cross your fingers...
- */
- down(&ahc->platform_data->eh_sem);
-
- /*
- * Mark the dv thread as already dead. This
- * avoids attempting to kill it a second time.
- * This is necessary because we must kill the
- * DV thread before calling ahc_free() in the
- * module shutdown case to avoid bogus locking
- * in the SCSI mid-layer, but we ahc_free() is
- * called without killing the DV thread in the
- * instance detach case, so ahc_platform_free()
- * calls us again to verify that the DV thread
- * is dead.
- */
- ahc->platform_data->dv_pid = 0;
- } else {
- ahc_unlock(ahc, &s);
- }
-}
-
-static int
-ahc_linux_dv_thread(void *data)
-{
- struct ahc_softc *ahc;
- int target;
- u_long s;
-
- ahc = (struct ahc_softc *)data;
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV)
- printf("Launching DV Thread\n");
-#endif
-
- /*
- * Complete thread creation.
- */
- lock_kernel();
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- /*
- * Don't care about any signals.
- */
- siginitsetinv(¤t->blocked, 0);
-
- daemonize();
- sprintf(current->comm, "ahc_dv_%d", ahc->unit);
-#else
- daemonize("ahc_dv_%d", ahc->unit);
- current->flags |= PF_FREEZE;
-#endif
- unlock_kernel();
-
- while (1) {
- /*
- * Use down_interruptible() rather than down() to
- * avoid inclusion in the load average.
- */
- down_interruptible(&ahc->platform_data->dv_sem);
-
- /* Check to see if we've been signaled to exit */
- ahc_lock(ahc, &s);
- if ((ahc->platform_data->flags & AHC_DV_SHUTDOWN) != 0) {
- ahc_unlock(ahc, &s);
- break;
- }
- ahc_unlock(ahc, &s);
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV)
- printf("%s: Beginning Domain Validation\n",
- ahc_name(ahc));
-#endif
-
- /*
- * Wait for any pending commands to drain before proceeding.
- */
- ahc_lock(ahc, &s);
- while (LIST_FIRST(&ahc->pending_scbs) != NULL) {
- ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_EMPTY;
- ahc_unlock(ahc, &s);
- down_interruptible(&ahc->platform_data->dv_sem);
- ahc_lock(ahc, &s);
- }
-
- /*
- * Wait for the SIMQ to be released so that DV is the
- * only reason the queue is frozen.
- */
- while (AHC_DV_SIMQ_FROZEN(ahc) == 0) {
- ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_RELEASE;
- ahc_unlock(ahc, &s);
- down_interruptible(&ahc->platform_data->dv_sem);
- ahc_lock(ahc, &s);
- }
- ahc_unlock(ahc, &s);
-
- for (target = 0; target < AHC_NUM_TARGETS; target++)
- ahc_linux_dv_target(ahc, target);
-
- ahc_lock(ahc, &s);
- ahc->platform_data->flags &= ~AHC_DV_ACTIVE;
- ahc_unlock(ahc, &s);
-
- /*
- * Release the SIMQ so that normal commands are
- * allowed to continue on the bus.
- */
- ahc_linux_release_simq((u_long)ahc);
- }
- up(&ahc->platform_data->eh_sem);
- return (0);
-}
-
-#define AHC_LINUX_DV_INQ_SHORT_LEN 36
-#define AHC_LINUX_DV_INQ_LEN 256
-#define AHC_LINUX_DV_TIMEOUT (HZ / 4)
-
-#define AHC_SET_DV_STATE(ahc, targ, newstate) \
- ahc_set_dv_state(ahc, targ, newstate, __LINE__)
-
-static __inline void
-ahc_set_dv_state(struct ahc_softc *ahc, struct ahc_linux_target *targ,
- ahc_dv_state newstate, u_int line)
-{
- ahc_dv_state oldstate;
-
- oldstate = targ->dv_state;
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV)
- printf("%s:%d: Going from state %d to state %d\n",
- ahc_name(ahc), line, oldstate, newstate);
-#endif
-
- if (oldstate == newstate)
- targ->dv_state_retry++;
- else
- targ->dv_state_retry = 0;
- targ->dv_state = newstate;
-}
-
-static void
-ahc_linux_dv_target(struct ahc_softc *ahc, u_int target_offset)
-{
- struct ahc_devinfo devinfo;
- struct ahc_linux_target *targ;
- struct scsi_cmnd *cmd;
- struct scsi_device *scsi_dev;
- struct scsi_sense_data *sense;
- uint8_t *buffer;
- u_long s;
- u_int timeout;
- int echo_size;
-
- sense = NULL;
- buffer = NULL;
- echo_size = 0;
- ahc_lock(ahc, &s);
- targ = ahc->platform_data->targets[target_offset];
- if (targ == NULL || (targ->flags & AHC_DV_REQUIRED) == 0) {
- ahc_unlock(ahc, &s);
- return;
- }
- ahc_compile_devinfo(&devinfo,
- targ->channel == 0 ? ahc->our_id : ahc->our_id_b,
- targ->target, /*lun*/0, targ->channel + 'A',
- ROLE_INITIATOR);
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, &devinfo);
- printf("Performing DV\n");
- }
-#endif
-
- ahc_unlock(ahc, &s);
-
- cmd = malloc(sizeof(struct scsi_cmnd), M_DEVBUF, M_WAITOK);
- scsi_dev = malloc(sizeof(struct scsi_device), M_DEVBUF, M_WAITOK);
- scsi_dev->host = ahc->platform_data->host;
- scsi_dev->id = devinfo.target;
- scsi_dev->lun = devinfo.lun;
- scsi_dev->channel = devinfo.channel - 'A';
- ahc->platform_data->dv_scsi_dev = scsi_dev;
-
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_INQ_SHORT_ASYNC);
-
- while (targ->dv_state != AHC_DV_STATE_EXIT) {
- timeout = AHC_LINUX_DV_TIMEOUT;
- switch (targ->dv_state) {
- case AHC_DV_STATE_INQ_SHORT_ASYNC:
- case AHC_DV_STATE_INQ_ASYNC:
- case AHC_DV_STATE_INQ_ASYNC_VERIFY:
- /*
- * Set things to async narrow to reduce the
- * chance that the INQ will fail.
- */
- ahc_lock(ahc, &s);
- ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0,
- AHC_TRANS_GOAL, /*paused*/FALSE);
- ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
- AHC_TRANS_GOAL, /*paused*/FALSE);
- ahc_unlock(ahc, &s);
- timeout = 10 * HZ;
- targ->flags &= ~AHC_INQ_VALID;
- /* FALLTHROUGH */
- case AHC_DV_STATE_INQ_VERIFY:
- {
- u_int inq_len;
-
- if (targ->dv_state == AHC_DV_STATE_INQ_SHORT_ASYNC)
- inq_len = AHC_LINUX_DV_INQ_SHORT_LEN;
- else
- inq_len = targ->inq_data->additional_length + 5;
- ahc_linux_dv_inq(ahc, cmd, &devinfo, targ, inq_len);
- break;
- }
- case AHC_DV_STATE_TUR:
- case AHC_DV_STATE_BUSY:
- timeout = 5 * HZ;
- ahc_linux_dv_tur(ahc, cmd, &devinfo);
- break;
- case AHC_DV_STATE_REBD:
- ahc_linux_dv_rebd(ahc, cmd, &devinfo, targ);
- break;
- case AHC_DV_STATE_WEB:
- ahc_linux_dv_web(ahc, cmd, &devinfo, targ);
- break;
-
- case AHC_DV_STATE_REB:
- ahc_linux_dv_reb(ahc, cmd, &devinfo, targ);
- break;
-
- case AHC_DV_STATE_SU:
- ahc_linux_dv_su(ahc, cmd, &devinfo, targ);
- timeout = 50 * HZ;
- break;
-
- default:
- ahc_print_devinfo(ahc, &devinfo);
- printf("Unknown DV state %d\n", targ->dv_state);
- goto out;
- }
-
- /* Queue the command and wait for it to complete */
- /* Abuse eh_timeout in the scsi_cmnd struct for our purposes */
- init_timer(&cmd->eh_timeout);
-#ifdef AHC_DEBUG
- if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
- /*
- * All of the printfs during negotiation
- * really slow down the negotiation.
- * Add a bit of time just to be safe.
- */
- timeout += HZ;
-#endif
- scsi_add_timer(cmd, timeout, ahc_linux_dv_timeout);
- /*
- * In 2.5.X, it is assumed that all calls from the
- * "midlayer" (which we are emulating) will have the
- * ahc host lock held. For other kernels, the
- * io_request_lock must be held.
- */
-#if AHC_SCSI_HAS_HOST_LOCK != 0
- ahc_lock(ahc, &s);
-#else
- spin_lock_irqsave(&io_request_lock, s);
-#endif
- ahc_linux_queue(cmd, ahc_linux_dv_complete);
-#if AHC_SCSI_HAS_HOST_LOCK != 0
- ahc_unlock(ahc, &s);
-#else
- spin_unlock_irqrestore(&io_request_lock, s);
-#endif
- down_interruptible(&ahc->platform_data->dv_cmd_sem);
- /*
- * Wait for the SIMQ to be released so that DV is the
- * only reason the queue is frozen.
- */
- ahc_lock(ahc, &s);
- while (AHC_DV_SIMQ_FROZEN(ahc) == 0) {
- ahc->platform_data->flags |= AHC_DV_WAIT_SIMQ_RELEASE;
- ahc_unlock(ahc, &s);
- down_interruptible(&ahc->platform_data->dv_sem);
- ahc_lock(ahc, &s);
- }
- ahc_unlock(ahc, &s);
-
- ahc_linux_dv_transition(ahc, cmd, &devinfo, targ);
- }
-
-out:
- if ((targ->flags & AHC_INQ_VALID) != 0
- && ahc_linux_get_device(ahc, devinfo.channel - 'A',
- devinfo.target, devinfo.lun,
- /*alloc*/FALSE) == NULL) {
- /*
- * The DV state machine failed to configure this device.
- * This is normal if DV is disabled. Since we have inquiry
- * data, filter it and use the "optimistic" negotiation
- * parameters found in the inquiry string.
- */
- ahc_linux_filter_inquiry(ahc, &devinfo);
- if ((targ->flags & (AHC_BASIC_DV|AHC_ENHANCED_DV)) != 0) {
- ahc_print_devinfo(ahc, &devinfo);
- printf("DV failed to configure device. "
- "Please file a bug report against "
- "this driver.\n");
- }
- }
-
- if (cmd != NULL)
- free(cmd, M_DEVBUF);
-
- if (ahc->platform_data->dv_scsi_dev != NULL) {
- free(ahc->platform_data->dv_scsi_dev, M_DEVBUF);
- ahc->platform_data->dv_scsi_dev = NULL;
- }
-
- ahc_lock(ahc, &s);
- if (targ->dv_buffer != NULL) {
- free(targ->dv_buffer, M_DEVBUF);
- targ->dv_buffer = NULL;
- }
- if (targ->dv_buffer1 != NULL) {
- free(targ->dv_buffer1, M_DEVBUF);
- targ->dv_buffer1 = NULL;
- }
- targ->flags &= ~AHC_DV_REQUIRED;
- if (targ->refcount == 0)
- ahc_linux_free_target(ahc, targ);
- ahc_unlock(ahc, &s);
-}
-
-static void
-ahc_linux_dv_transition(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ)
-{
- u_int32_t status;
-
- status = aic_error_action(cmd, targ->inq_data,
- ahc_cmd_get_transaction_status(cmd),
- ahc_cmd_get_scsi_status(cmd));
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Entering ahc_linux_dv_transition, state= %d, "
- "status= 0x%x, cmd->result= 0x%x\n", targ->dv_state,
- status, cmd->result);
- }
-#endif
-
- switch (targ->dv_state) {
- case AHC_DV_STATE_INQ_SHORT_ASYNC:
- case AHC_DV_STATE_INQ_ASYNC:
- switch (status & SS_MASK) {
- case SS_NOP:
- {
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state+1);
- break;
- }
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_TUR:
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ)
- targ->dv_state_retry--;
- if ((status & SS_ERRMASK) == EBUSY)
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
- if (targ->dv_state_retry < 10)
- break;
- /* FALLTHROUGH */
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Failed DV inquiry, skipping\n");
- }
-#endif
- break;
- }
- break;
- case AHC_DV_STATE_INQ_ASYNC_VERIFY:
- switch (status & SS_MASK) {
- case SS_NOP:
- {
- u_int xportflags;
- u_int spi3data;
-
- if (memcmp(targ->inq_data, targ->dv_buffer,
- AHC_LINUX_DV_INQ_LEN) != 0) {
- /*
- * Inquiry data must have changed.
- * Try from the top again.
- */
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- }
-
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state+1);
- targ->flags |= AHC_INQ_VALID;
- if (ahc_linux_user_dv_setting(ahc) == 0)
- break;
-
- xportflags = targ->inq_data->flags;
- if ((xportflags & (SID_Sync|SID_WBus16)) == 0)
- break;
-
- spi3data = targ->inq_data->spi3data;
- switch (spi3data & SID_SPI_CLOCK_DT_ST) {
- default:
- case SID_SPI_CLOCK_ST:
- /* Assume only basic DV is supported. */
- targ->flags |= AHC_BASIC_DV;
- break;
- case SID_SPI_CLOCK_DT:
- case SID_SPI_CLOCK_DT_ST:
- targ->flags |= AHC_ENHANCED_DV;
- break;
- }
- break;
- }
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_TUR:
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ)
- targ->dv_state_retry--;
-
- if ((status & SS_ERRMASK) == EBUSY)
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
- if (targ->dv_state_retry < 10)
- break;
- /* FALLTHROUGH */
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Failed DV inquiry, skipping\n");
- }
-#endif
- break;
- }
- break;
- case AHC_DV_STATE_INQ_VERIFY:
- switch (status & SS_MASK) {
- case SS_NOP:
- {
-
- if (memcmp(targ->inq_data, targ->dv_buffer,
- AHC_LINUX_DV_INQ_LEN) == 0) {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- int i;
-
- ahc_print_devinfo(ahc, devinfo);
- printf("Inquiry buffer mismatch:");
- for (i = 0; i < AHC_LINUX_DV_INQ_LEN; i++) {
- if ((i & 0xF) == 0)
- printf("\n ");
- printf("0x%x:0x0%x ",
- ((uint8_t *)targ->inq_data)[i],
- targ->dv_buffer[i]);
- }
- printf("\n");
- }
-#endif
-
- if (ahc_linux_fallback(ahc, devinfo) != 0) {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- /*
- * Do not count "falling back"
- * against our retries.
- */
- targ->dv_state_retry = 0;
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- break;
- }
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_TUR:
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ) {
- targ->dv_state_retry--;
- } else if ((status & SSQ_FALLBACK) != 0) {
- if (ahc_linux_fallback(ahc, devinfo) != 0) {
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_EXIT);
- break;
- }
- /*
- * Do not count "falling back"
- * against our retries.
- */
- targ->dv_state_retry = 0;
- } else if ((status & SS_ERRMASK) == EBUSY)
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
- if (targ->dv_state_retry < 10)
- break;
- /* FALLTHROUGH */
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Failed DV inquiry, skipping\n");
- }
-#endif
- break;
- }
- break;
-
- case AHC_DV_STATE_TUR:
- switch (status & SS_MASK) {
- case SS_NOP:
- if ((targ->flags & AHC_BASIC_DV) != 0) {
- ahc_linux_filter_inquiry(ahc, devinfo);
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_VERIFY);
- } else if ((targ->flags & AHC_ENHANCED_DV) != 0) {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_REBD);
- } else {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- }
- break;
- case SS_RETRY:
- case SS_TUR:
- if ((status & SS_ERRMASK) == EBUSY) {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_BUSY);
- break;
- }
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ) {
- targ->dv_state_retry--;
- } else if ((status & SSQ_FALLBACK) != 0) {
- if (ahc_linux_fallback(ahc, devinfo) != 0) {
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_EXIT);
- break;
- }
- /*
- * Do not count "falling back"
- * against our retries.
- */
- targ->dv_state_retry = 0;
- }
- if (targ->dv_state_retry >= 10) {
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("DV TUR reties exhausted\n");
- }
-#endif
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- if (status & SSQ_DELAY)
- ssleep(1);
-
- break;
- case SS_START:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_SU);
- break;
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- break;
-
- case AHC_DV_STATE_REBD:
- switch (status & SS_MASK) {
- case SS_NOP:
- {
- uint32_t echo_size;
-
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_WEB);
- echo_size = scsi_3btoul(&targ->dv_buffer[1]);
- echo_size &= 0x1FFF;
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Echo buffer size= %d\n", echo_size);
- }
-#endif
- if (echo_size == 0) {
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
-
- /* Generate the buffer pattern */
- targ->dv_echo_size = echo_size;
- ahc_linux_generate_dv_pattern(targ);
- /*
- * Setup initial negotiation values.
- */
- ahc_linux_filter_inquiry(ahc, devinfo);
- break;
- }
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ)
- targ->dv_state_retry--;
- if (targ->dv_state_retry <= 10)
- break;
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("DV REBD reties exhausted\n");
- }
-#endif
- /* FALLTHROUGH */
- case SS_FATAL:
- default:
- /*
- * Setup initial negotiation values
- * and try level 1 DV.
- */
- ahc_linux_filter_inquiry(ahc, devinfo);
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_INQ_VERIFY);
- targ->dv_echo_size = 0;
- break;
- }
- break;
-
- case AHC_DV_STATE_WEB:
- switch (status & SS_MASK) {
- case SS_NOP:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_REB);
- break;
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ) {
- targ->dv_state_retry--;
- } else if ((status & SSQ_FALLBACK) != 0) {
- if (ahc_linux_fallback(ahc, devinfo) != 0) {
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_EXIT);
- break;
- }
- /*
- * Do not count "falling back"
- * against our retries.
- */
- targ->dv_state_retry = 0;
- }
- if (targ->dv_state_retry <= 10)
- break;
- /* FALLTHROUGH */
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("DV WEB reties exhausted\n");
- }
-#endif
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- break;
-
- case AHC_DV_STATE_REB:
- switch (status & SS_MASK) {
- case SS_NOP:
- if (memcmp(targ->dv_buffer, targ->dv_buffer1,
- targ->dv_echo_size) != 0) {
- if (ahc_linux_fallback(ahc, devinfo) != 0)
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_EXIT);
- else
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_WEB);
- break;
- }
-
- if (targ->dv_buffer != NULL) {
- free(targ->dv_buffer, M_DEVBUF);
- targ->dv_buffer = NULL;
- }
- if (targ->dv_buffer1 != NULL) {
- free(targ->dv_buffer1, M_DEVBUF);
- targ->dv_buffer1 = NULL;
- }
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ) {
- targ->dv_state_retry--;
- } else if ((status & SSQ_FALLBACK) != 0) {
- if (ahc_linux_fallback(ahc, devinfo) != 0) {
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_EXIT);
- break;
- }
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_WEB);
- }
- if (targ->dv_state_retry <= 10) {
- if ((status & (SSQ_DELAY_RANDOM|SSQ_DELAY))!= 0)
- msleep(ahc->our_id*1000/10);
- break;
- }
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("DV REB reties exhausted\n");
- }
-#endif
- /* FALLTHROUGH */
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- break;
-
- case AHC_DV_STATE_SU:
- switch (status & SS_MASK) {
- case SS_NOP:
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- break;
-
- case AHC_DV_STATE_BUSY:
- switch (status & SS_MASK) {
- case SS_NOP:
- case SS_INQ_REFRESH:
- AHC_SET_DV_STATE(ahc, targ,
- AHC_DV_STATE_INQ_SHORT_ASYNC);
- break;
- case SS_TUR:
- case SS_RETRY:
- AHC_SET_DV_STATE(ahc, targ, targ->dv_state);
- if (ahc_cmd_get_transaction_status(cmd)
- == CAM_REQUEUE_REQ) {
- targ->dv_state_retry--;
- } else if (targ->dv_state_retry < 60) {
- if ((status & SSQ_DELAY) != 0)
- ssleep(1);
- } else {
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("DV BUSY reties exhausted\n");
- }
-#endif
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- }
- break;
- default:
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
- break;
-
- default:
- printf("%s: Invalid DV completion state %d\n", ahc_name(ahc),
- targ->dv_state);
- AHC_SET_DV_STATE(ahc, targ, AHC_DV_STATE_EXIT);
- break;
- }
-}
-
-static void
-ahc_linux_dv_fill_cmd(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo)
-{
- memset(cmd, 0, sizeof(struct scsi_cmnd));
- cmd->device = ahc->platform_data->dv_scsi_dev;
- cmd->scsi_done = ahc_linux_dv_complete;
-}
-
-/*
- * Synthesize an inquiry command. On the return trip, it'll be
- * sniffed and the device transfer settings set for us.
- */
-static void
-ahc_linux_dv_inq(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo, struct ahc_linux_target *targ,
- u_int request_length)
-{
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending INQ\n");
- }
-#endif
- if (targ->inq_data == NULL)
- targ->inq_data = malloc(AHC_LINUX_DV_INQ_LEN,
- M_DEVBUF, M_WAITOK);
- if (targ->dv_state > AHC_DV_STATE_INQ_ASYNC) {
- if (targ->dv_buffer != NULL)
- free(targ->dv_buffer, M_DEVBUF);
- targ->dv_buffer = malloc(AHC_LINUX_DV_INQ_LEN,
- M_DEVBUF, M_WAITOK);
- }
-
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_FROM_DEVICE;
- cmd->cmd_len = 6;
- cmd->cmnd[0] = INQUIRY;
- cmd->cmnd[4] = request_length;
- cmd->request_bufflen = request_length;
- if (targ->dv_state > AHC_DV_STATE_INQ_ASYNC)
- cmd->request_buffer = targ->dv_buffer;
- else
- cmd->request_buffer = targ->inq_data;
- memset(cmd->request_buffer, 0, AHC_LINUX_DV_INQ_LEN);
-}
-
-static void
-ahc_linux_dv_tur(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo)
-{
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending TUR\n");
- }
-#endif
- /* Do a TUR to clear out any non-fatal transitional state */
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_NONE;
- cmd->cmd_len = 6;
- cmd->cmnd[0] = TEST_UNIT_READY;
-}
-
-#define AHC_REBD_LEN 4
-
-static void
-ahc_linux_dv_rebd(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending REBD\n");
- }
-#endif
- if (targ->dv_buffer != NULL)
- free(targ->dv_buffer, M_DEVBUF);
- targ->dv_buffer = malloc(AHC_REBD_LEN, M_DEVBUF, M_WAITOK);
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_FROM_DEVICE;
- cmd->cmd_len = 10;
- cmd->cmnd[0] = READ_BUFFER;
- cmd->cmnd[1] = 0x0b;
- scsi_ulto3b(AHC_REBD_LEN, &cmd->cmnd[6]);
- cmd->request_bufflen = AHC_REBD_LEN;
- cmd->underflow = cmd->request_bufflen;
- cmd->request_buffer = targ->dv_buffer;
-}
-
-static void
-ahc_linux_dv_web(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending WEB\n");
- }
-#endif
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_TO_DEVICE;
- cmd->cmd_len = 10;
- cmd->cmnd[0] = WRITE_BUFFER;
- cmd->cmnd[1] = 0x0a;
- scsi_ulto3b(targ->dv_echo_size, &cmd->cmnd[6]);
- cmd->request_bufflen = targ->dv_echo_size;
- cmd->underflow = cmd->request_bufflen;
- cmd->request_buffer = targ->dv_buffer;
-}
-
-static void
-ahc_linux_dv_reb(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo, struct ahc_linux_target *targ)
-{
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending REB\n");
- }
-#endif
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_FROM_DEVICE;
- cmd->cmd_len = 10;
- cmd->cmnd[0] = READ_BUFFER;
- cmd->cmnd[1] = 0x0a;
- scsi_ulto3b(targ->dv_echo_size, &cmd->cmnd[6]);
- cmd->request_bufflen = targ->dv_echo_size;
- cmd->underflow = cmd->request_bufflen;
- cmd->request_buffer = targ->dv_buffer1;
-}
-
-static void
-ahc_linux_dv_su(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
- struct ahc_devinfo *devinfo,
- struct ahc_linux_target *targ)
-{
- u_int le;
-
- le = SID_IS_REMOVABLE(targ->inq_data) ? SSS_LOEJ : 0;
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Sending SU\n");
- }
-#endif
- ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
- cmd->sc_data_direction = DMA_NONE;
- cmd->cmd_len = 6;
- cmd->cmnd[0] = START_STOP_UNIT;
- cmd->cmnd[4] = le | SSS_START;
-}
-
-static int
-ahc_linux_fallback(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
-{
- struct ahc_linux_target *targ;
- struct ahc_initiator_tinfo *tinfo;
- struct ahc_transinfo *goal;
- struct ahc_tmode_tstate *tstate;
- struct ahc_syncrate *syncrate;
- u_long s;
- u_int width;
- u_int period;
- u_int offset;
- u_int ppr_options;
- u_int cur_speed;
- u_int wide_speed;
- u_int narrow_speed;
- u_int fallback_speed;
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- ahc_print_devinfo(ahc, devinfo);
- printf("Trying to fallback\n");
- }
-#endif
- ahc_lock(ahc, &s);
- targ = ahc->platform_data->targets[devinfo->target_offset];
- tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
- devinfo->our_scsiid,
- devinfo->target, &tstate);
- goal = &tinfo->goal;
- width = goal->width;
- period = goal->period;
- offset = goal->offset;
- ppr_options = goal->ppr_options;
- if (offset == 0)
- period = AHC_ASYNC_XFER_PERIOD;
- if (targ->dv_next_narrow_period == 0)
- targ->dv_next_narrow_period = MAX(period, AHC_SYNCRATE_ULTRA2);
- if (targ->dv_next_wide_period == 0)
- targ->dv_next_wide_period = period;
- if (targ->dv_max_width == 0)
- targ->dv_max_width = width;
- if (targ->dv_max_ppr_options == 0)
- targ->dv_max_ppr_options = ppr_options;
- if (targ->dv_last_ppr_options == 0)
- targ->dv_last_ppr_options = ppr_options;
-
- cur_speed = aic_calc_speed(width, period, offset, AHC_SYNCRATE_MIN);
- wide_speed = aic_calc_speed(MSG_EXT_WDTR_BUS_16_BIT,
- targ->dv_next_wide_period,
- MAX_OFFSET,
- AHC_SYNCRATE_MIN);
- narrow_speed = aic_calc_speed(MSG_EXT_WDTR_BUS_8_BIT,
- targ->dv_next_narrow_period,
- MAX_OFFSET,
- AHC_SYNCRATE_MIN);
- fallback_speed = aic_calc_speed(width, period+1, offset,
- AHC_SYNCRATE_MIN);
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- printf("cur_speed= %d, wide_speed= %d, narrow_speed= %d, "
- "fallback_speed= %d\n", cur_speed, wide_speed,
- narrow_speed, fallback_speed);
- }
-#endif
-
- if (cur_speed > 160000) {
- /*
- * Paced/DT/IU_REQ only transfer speeds. All we
- * can do is fallback in terms of syncrate.
- */
- period++;
- } else if (cur_speed > 80000) {
- if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
- /*
- * Try without IU_REQ as it may be confusing
- * an expander.
- */
- ppr_options &= ~MSG_EXT_PPR_IU_REQ;
- } else {
- /*
- * Paced/DT only transfer speeds. All we
- * can do is fallback in terms of syncrate.
- */
- period++;
- ppr_options = targ->dv_max_ppr_options;
- }
- } else if (cur_speed > 3300) {
-
- /*
- * In this range we the following
- * options ordered from highest to
- * lowest desireability:
- *
- * o Wide/DT
- * o Wide/non-DT
- * o Narrow at a potentally higher sync rate.
- *
- * All modes are tested with and without IU_REQ
- * set since using IUs may confuse an expander.
- */
- if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
-
- ppr_options &= ~MSG_EXT_PPR_IU_REQ;
- } else if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
- /*
- * Try going non-DT.
- */
- ppr_options = targ->dv_max_ppr_options;
- ppr_options &= ~MSG_EXT_PPR_DT_REQ;
- } else if (targ->dv_last_ppr_options != 0) {
- /*
- * Try without QAS or any other PPR options.
- * We may need a non-PPR message to work with
- * an expander. We look at the "last PPR options"
- * so we will perform this fallback even if the
- * target responded to our PPR negotiation with
- * no option bits set.
- */
- ppr_options = 0;
- } else if (width == MSG_EXT_WDTR_BUS_16_BIT) {
- /*
- * If the next narrow speed is greater than
- * the next wide speed, fallback to narrow.
- * Otherwise fallback to the next DT/Wide setting.
- * The narrow async speed will always be smaller
- * than the wide async speed, so handle this case
- * specifically.
- */
- ppr_options = targ->dv_max_ppr_options;
- if (narrow_speed > fallback_speed
- || period >= AHC_ASYNC_XFER_PERIOD) {
- targ->dv_next_wide_period = period+1;
- width = MSG_EXT_WDTR_BUS_8_BIT;
- period = targ->dv_next_narrow_period;
- } else {
- period++;
- }
- } else if ((ahc->features & AHC_WIDE) != 0
- && targ->dv_max_width != 0
- && wide_speed >= fallback_speed
- && (targ->dv_next_wide_period <= AHC_ASYNC_XFER_PERIOD
- || period >= AHC_ASYNC_XFER_PERIOD)) {
-
- /*
- * We are narrow. Try falling back
- * to the next wide speed with
- * all supported ppr options set.
- */
- targ->dv_next_narrow_period = period+1;
- width = MSG_EXT_WDTR_BUS_16_BIT;
- period = targ->dv_next_wide_period;
- ppr_options = targ->dv_max_ppr_options;
- } else {
- /* Only narrow fallback is allowed. */
- period++;
- ppr_options = targ->dv_max_ppr_options;
- }
- } else {
- ahc_unlock(ahc, &s);
- return (-1);
- }
- offset = MAX_OFFSET;
- syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,
- AHC_SYNCRATE_DT);
- ahc_set_width(ahc, devinfo, width, AHC_TRANS_GOAL, FALSE);
- if (period == 0) {
- period = 0;
- offset = 0;
- ppr_options = 0;
- if (width == MSG_EXT_WDTR_BUS_8_BIT)
- targ->dv_next_narrow_period = AHC_ASYNC_XFER_PERIOD;
- else
- targ->dv_next_wide_period = AHC_ASYNC_XFER_PERIOD;
- }
- ahc_set_syncrate(ahc, devinfo, syncrate, period, offset,
- ppr_options, AHC_TRANS_GOAL, FALSE);
- targ->dv_last_ppr_options = ppr_options;
- ahc_unlock(ahc, &s);
- return (0);
-}
-
-static void
-ahc_linux_dv_timeout(struct scsi_cmnd *cmd)
-{
- struct ahc_softc *ahc;
- struct scb *scb;
- u_long flags;
-
- ahc = *((struct ahc_softc **)cmd->device->host->hostdata);
- ahc_lock(ahc, &flags);
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV) {
- printf("%s: Timeout while doing DV command %x.\n",
- ahc_name(ahc), cmd->cmnd[0]);
- ahc_dump_card_state(ahc);
- }
-#endif
-
- /*
- * Guard against "done race". No action is
- * required if we just completed.
- */
- if ((scb = (struct scb *)cmd->host_scribble) == NULL) {
- ahc_unlock(ahc, &flags);
- return;
- }
-
- /*
- * Command has not completed. Mark this
- * SCB as having failing status prior to
- * resetting the bus, so we get the correct
- * error code.
- */
- if ((scb->flags & SCB_SENSE) != 0)
- ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
- else
- ahc_set_transaction_status(scb, CAM_CMD_TIMEOUT);
- ahc_reset_channel(ahc, cmd->device->channel + 'A', /*initiate*/TRUE);
-
- /*
- * Add a minimal bus settle delay for devices that are slow to
- * respond after bus resets.
- */
- ahc_linux_freeze_simq(ahc);
- init_timer(&ahc->platform_data->reset_timer);
- ahc->platform_data->reset_timer.data = (u_long)ahc;
- ahc->platform_data->reset_timer.expires = jiffies + HZ / 2;
- ahc->platform_data->reset_timer.function =
- (ahc_linux_callback_t *)ahc_linux_release_simq;
- add_timer(&ahc->platform_data->reset_timer);
- if (ahc_linux_next_device_to_run(ahc) != NULL)
- ahc_schedule_runq(ahc);
- ahc_linux_run_complete_queue(ahc);
- ahc_unlock(ahc, &flags);
-}
-
-static void
-ahc_linux_dv_complete(struct scsi_cmnd *cmd)
-{
- struct ahc_softc *ahc;
-
- ahc = *((struct ahc_softc **)cmd->device->host->hostdata);
-
- /* Delete the DV timer before it goes off! */
- scsi_delete_timer(cmd);
-
-#ifdef AHC_DEBUG
- if (ahc_debug & AHC_SHOW_DV)
- printf("%s:%d:%d: Command completed, status= 0x%x\n",
- ahc_name(ahc), cmd->device->channel,
- cmd->device->id, cmd->result);
-#endif
-
- /* Wake up the state machine */
- up(&ahc->platform_data->dv_cmd_sem);
-}
-
-static void
-ahc_linux_generate_dv_pattern(struct ahc_linux_target *targ)
-{
- uint16_t b;
- u_int i;
- u_int j;
-
- if (targ->dv_buffer != NULL)
- free(targ->dv_buffer, M_DEVBUF);
- targ->dv_buffer = malloc(targ->dv_echo_size, M_DEVBUF, M_WAITOK);
- if (targ->dv_buffer1 != NULL)
- free(targ->dv_buffer1, M_DEVBUF);
- targ->dv_buffer1 = malloc(targ->dv_echo_size, M_DEVBUF, M_WAITOK);
-
- i = 0;
- b = 0x0001;
- for (j = 0 ; i < targ->dv_echo_size; j++) {
- if (j < 32) {
- /*
- * 32bytes of sequential numbers.
- */
- targ->dv_buffer[i++] = j & 0xff;
- } else if (j < 48) {
- /*
- * 32bytes of repeating 0x0000, 0xffff.
- */
- targ->dv_buffer[i++] = (j & 0x02) ? 0xff : 0x00;
- } else if (j < 64) {
- /*
- * 32bytes of repeating 0x5555, 0xaaaa.
- */
- targ->dv_buffer[i++] = (j & 0x02) ? 0xaa : 0x55;
- } else {
- /*
- * Remaining buffer is filled with a repeating
- * patter of:
- *
- * 0xffff
- * ~0x0001 << shifted once in each loop.
- */
- if (j & 0x02) {
- if (j & 0x01) {
- targ->dv_buffer[i++] = ~(b >> 8) & 0xff;
- b <<= 1;
- if (b == 0x0000)
- b = 0x0001;
- } else {
- targ->dv_buffer[i++] = (~b & 0xff);
- }
- } else {
- targ->dv_buffer[i++] = 0xff;
- }
- }
- }
-}
-
static u_int
ahc_linux_user_tagdepth(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
@@ -3482,48 +2016,6 @@
return (tags);
}
-static u_int
-ahc_linux_user_dv_setting(struct ahc_softc *ahc)
-{
- static int warned_user;
- int dv;
-
- if (ahc->unit >= NUM_ELEMENTS(aic7xxx_dv_settings)) {
- if (warned_user == 0) {
-
- printf(KERN_WARNING
-"aic7xxx: WARNING: Insufficient dv settings instances\n"
-"aic7xxx: for installed controllers. Using defaults\n"
-"aic7xxx: Please update the aic7xxx_dv_settings array\n"
-"aic7xxx: in the aic7xxx_osm.c source file.\n");
- warned_user++;
- }
- dv = -1;
- } else {
-
- dv = aic7xxx_dv_settings[ahc->unit];
- }
-
- if (dv < 0) {
- u_long s;
-
- /*
- * Apply the default.
- */
- /*
- * XXX - Enable DV on non-U160 controllers once it
- * has been tested there.
- */
- ahc_lock(ahc, &s);
- dv = (ahc->features & AHC_DT);
- if (ahc->seep_config != 0
- && ahc->seep_config->signature >= CFSIGNATURE2)
- dv = (ahc->seep_config->adapter_control & CFENABLEDV);
- ahc_unlock(ahc, &s);
- }
- return (dv);
-}
-
/*
* Determines the queue depth for a given device.
*/
@@ -3574,8 +2066,7 @@
* Schedule us to run later. The only reason we are not
* running is because the whole controller Q is frozen.
*/
- if (ahc->platform_data->qfrozen != 0
- && AHC_DV_SIMQ_FROZEN(ahc) == 0) {
+ if (ahc->platform_data->qfrozen != 0) {
TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
dev, links);
dev->flags |= AHC_DEV_ON_RUN_LIST;
@@ -3616,9 +2107,6 @@
if ((ahc->user_discenable & mask) != 0)
hscb->control |= DISCENB;
- if (AHC_DV_CMD(cmd) != 0)
- scb->flags |= SCB_SILENT;
-
if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
@@ -3811,7 +2299,6 @@
targ->channel = channel;
targ->target = target;
targ->ahc = ahc;
- targ->flags = AHC_DV_REQUIRED;
ahc->platform_data->targets[target_offset] = targ;
return (targ);
}
@@ -3850,10 +2337,6 @@
ahc->platform_data->targets[target_offset] = NULL;
if (targ->inq_data != NULL)
free(targ->inq_data, M_DEVBUF);
- if (targ->dv_buffer != NULL)
- free(targ->dv_buffer, M_DEVBUF);
- if (targ->dv_buffer1 != NULL)
- free(targ->dv_buffer1, M_DEVBUF);
free(targ, M_DEVBUF);
}
@@ -3900,8 +2383,7 @@
targ->devices[dev->lun] = NULL;
free(dev, M_DEVBUF);
targ->refcount--;
- if (targ->refcount == 0
- && (targ->flags & AHC_DV_REQUIRED) == 0)
+ if (targ->refcount == 0)
ahc_linux_free_target(ahc, targ);
}
@@ -4105,16 +2587,7 @@
ahc_linux_handle_scsi_status(ahc, dev, scb);
} else if (ahc_get_transaction_status(scb) == CAM_SEL_TIMEOUT) {
dev->flags |= AHC_DEV_UNCONFIGURED;
- if (AHC_DV_CMD(cmd) == FALSE)
- dev->target->flags &= ~AHC_DV_REQUIRED;
}
- /*
- * Start DV for devices that require it assuming the first command
- * sent does not result in a selection timeout.
- */
- if (ahc_get_transaction_status(scb) != CAM_SEL_TIMEOUT
- && (dev->target->flags & AHC_DV_REQUIRED) != 0)
- ahc_linux_start_dv(ahc);
if (dev->openings == 1
&& ahc_get_transaction_status(scb) == CAM_REQ_CMP
@@ -4158,13 +2631,6 @@
ahc_free_scb(ahc, scb);
ahc_linux_queue_cmd_complete(ahc, cmd);
-
- if ((ahc->platform_data->flags & AHC_DV_WAIT_SIMQ_EMPTY) != 0
- && LIST_FIRST(&ahc->pending_scbs) == NULL) {
- ahc->platform_data->flags &= ~AHC_DV_WAIT_SIMQ_EMPTY;
- up(&ahc->platform_data->dv_sem);
- }
-
}
static void
@@ -4341,7 +2807,7 @@
* full error information available when making
* state change decisions.
*/
- if (AHC_DV_CMD(cmd) == FALSE) {
+ {
u_int new_status;
switch (ahc_cmd_get_transaction_status(cmd)) {
@@ -4432,115 +2898,6 @@
}
static void
-ahc_linux_filter_inquiry(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
-{
- struct scsi_inquiry_data *sid;
- struct ahc_initiator_tinfo *tinfo;
- struct ahc_transinfo *user;
- struct ahc_transinfo *goal;
- struct ahc_transinfo *curr;
- struct ahc_tmode_tstate *tstate;
- struct ahc_syncrate *syncrate;
- struct ahc_linux_device *dev;
- u_int maxsync;
- u_int width;
- u_int period;
- u_int offset;
- u_int ppr_options;
- u_int trans_version;
- u_int prot_version;
-
- /*
- * Determine if this lun actually exists. If so,
- * hold on to its corresponding device structure.
- * If not, make sure we release the device and
- * don't bother processing the rest of this inquiry
- * command.
- */
- dev = ahc_linux_get_device(ahc, devinfo->channel - 'A',
- devinfo->target, devinfo->lun,
- /*alloc*/TRUE);
-
- sid = (struct scsi_inquiry_data *)dev->target->inq_data;
- if (SID_QUAL(sid) == SID_QUAL_LU_CONNECTED) {
-
- dev->flags &= ~AHC_DEV_UNCONFIGURED;
- } else {
- dev->flags |= AHC_DEV_UNCONFIGURED;
- return;
- }
-
- /*
- * Update our notion of this device's transfer
- * negotiation capabilities.
- */
- tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
- devinfo->our_scsiid,
- devinfo->target, &tstate);
- user = &tinfo->user;
- goal = &tinfo->goal;
- curr = &tinfo->curr;
- width = user->width;
- period = user->period;
- offset = user->offset;
- ppr_options = user->ppr_options;
- trans_version = user->transport_version;
- prot_version = MIN(user->protocol_version, SID_ANSI_REV(sid));
-
- /*
- * Only attempt SPI3/4 once we've verified that
- * the device claims to support SPI3/4 features.
- */
- if (prot_version < SCSI_REV_2)
- trans_version = SID_ANSI_REV(sid);
- else
- trans_version = SCSI_REV_2;
-
- if ((sid->flags & SID_WBus16) == 0)
- width = MSG_EXT_WDTR_BUS_8_BIT;
- if ((sid->flags & SID_Sync) == 0) {
- period = 0;
- offset = 0;
- ppr_options = 0;
- }
- if ((sid->spi3data & SID_SPI_QAS) == 0)
- ppr_options &= ~MSG_EXT_PPR_QAS_REQ;
- if ((sid->spi3data & SID_SPI_CLOCK_DT) == 0)
- ppr_options &= MSG_EXT_PPR_QAS_REQ;
- if ((sid->spi3data & SID_SPI_IUS) == 0)
- ppr_options &= (MSG_EXT_PPR_DT_REQ
- | MSG_EXT_PPR_QAS_REQ);
-
- if (prot_version > SCSI_REV_2
- && ppr_options != 0)
- trans_version = user->transport_version;
-
- ahc_validate_width(ahc, /*tinfo limit*/NULL, &width, ROLE_UNKNOWN);
- if ((ahc->features & AHC_ULTRA2) != 0)
- maxsync = AHC_SYNCRATE_DT;
- else if ((ahc->features & AHC_ULTRA) != 0)
- maxsync = AHC_SYNCRATE_ULTRA;
- else
- maxsync = AHC_SYNCRATE_FAST;
-
- syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, maxsync);
- ahc_validate_offset(ahc, /*tinfo limit*/NULL, syncrate,
- &offset, width, ROLE_UNKNOWN);
- if (offset == 0 || period == 0) {
- period = 0;
- offset = 0;
- ppr_options = 0;
- }
- /* Apply our filtered user settings. */
- curr->transport_version = trans_version;
- curr->protocol_version = prot_version;
- ahc_set_width(ahc, devinfo, width, AHC_TRANS_GOAL, /*paused*/FALSE);
- ahc_set_syncrate(ahc, devinfo, syncrate, period,
- offset, ppr_options, AHC_TRANS_GOAL,
- /*paused*/FALSE);
-}
-
-static void
ahc_linux_sem_timeout(u_long arg)
{
struct ahc_softc *ahc;
@@ -4585,11 +2942,6 @@
ahc->platform_data->qfrozen--;
if (ahc->platform_data->qfrozen == 0)
unblock_reqs = 1;
- if (AHC_DV_SIMQ_FROZEN(ahc)
- && ((ahc->platform_data->flags & AHC_DV_WAIT_SIMQ_RELEASE) != 0)) {
- ahc->platform_data->flags &= ~AHC_DV_WAIT_SIMQ_RELEASE;
- up(&ahc->platform_data->dv_sem);
- }
ahc_schedule_runq(ahc);
ahc_unlock(ahc, &s);
/*
@@ -5274,19 +3626,6 @@
static void
ahc_linux_exit(void)
{
- struct ahc_softc *ahc;
-
- /*
- * Shutdown DV threads before going into the SCSI mid-layer.
- * This avoids situations where the mid-layer locks the entire
- * kernel so that waiting for our DV threads to exit leads
- * to deadlock.
- */
- TAILQ_FOREACH(ahc, &ahc_tailq, links) {
-
- ahc_linux_kill_dv_thread(ahc);
- }
-
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
/*
* In 2.4 we have to unregister from the PCI core _after_