| /******************************************************************************* |
| * |
| * Module Name: utresrc - Resource managment utilities |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2005, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/amlresrc.h> |
| |
| #define _COMPONENT ACPI_UTILITIES |
| ACPI_MODULE_NAME("utmisc") |
| |
| /* |
| * Base sizes of the raw AML resource descriptors, indexed by resource type. |
| * Zero indicates a reserved (and therefore invalid) resource type. |
| */ |
| const u8 acpi_gbl_resource_aml_sizes[] = { |
| /* Small descriptors */ |
| |
| 0, |
| 0, |
| 0, |
| 0, |
| ACPI_AML_SIZE_SMALL(struct aml_resource_irq), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_dma), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_start_dependent), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_io), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io), |
| 0, |
| 0, |
| 0, |
| 0, |
| ACPI_AML_SIZE_SMALL(struct aml_resource_vendor_small), |
| ACPI_AML_SIZE_SMALL(struct aml_resource_end_tag), |
| |
| /* Large descriptors */ |
| |
| 0, |
| ACPI_AML_SIZE_LARGE(struct aml_resource_memory24), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_generic_register), |
| 0, |
| ACPI_AML_SIZE_LARGE(struct aml_resource_vendor_large), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_memory32), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_fixed_memory32), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_address32), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_address16), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_address64), |
| ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64) |
| }; |
| |
| /* |
| * Resource types, used to validate the resource length field. |
| * The length of fixed-length types must match exactly, variable |
| * lengths must meet the minimum required length, etc. |
| * Zero indicates a reserved (and therefore invalid) resource type. |
| */ |
| static const u8 acpi_gbl_resource_types[] = { |
| /* Small descriptors */ |
| |
| 0, |
| 0, |
| 0, |
| 0, |
| ACPI_SMALL_VARIABLE_LENGTH, |
| ACPI_FIXED_LENGTH, |
| ACPI_SMALL_VARIABLE_LENGTH, |
| ACPI_FIXED_LENGTH, |
| ACPI_FIXED_LENGTH, |
| ACPI_FIXED_LENGTH, |
| 0, |
| 0, |
| 0, |
| 0, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_FIXED_LENGTH, |
| |
| /* Large descriptors */ |
| |
| 0, |
| ACPI_FIXED_LENGTH, |
| ACPI_FIXED_LENGTH, |
| 0, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_FIXED_LENGTH, |
| ACPI_FIXED_LENGTH, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_VARIABLE_LENGTH, |
| ACPI_FIXED_LENGTH |
| }; |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_validate_resource |
| * |
| * PARAMETERS: Aml - Pointer to the raw AML resource descriptor |
| * return_index - Where the resource index is returned. NULL |
| * if the index is not required. |
| * |
| * RETURN: Status, and optionally the Index into the global resource tables |
| * |
| * DESCRIPTION: Validate an AML resource descriptor by checking the Resource |
| * Type and Resource Length. Returns an index into the global |
| * resource information/dispatch tables for later use. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) |
| { |
| u8 resource_type; |
| u8 resource_index; |
| acpi_rs_length resource_length; |
| acpi_rs_length minimum_resource_length; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* |
| * 1) Validate the resource_type field (Byte 0) |
| */ |
| resource_type = ACPI_GET8(aml); |
| |
| /* |
| * Byte 0 contains the descriptor name (Resource Type) |
| * Examine the large/small bit in the resource header |
| */ |
| if (resource_type & ACPI_RESOURCE_NAME_LARGE) { |
| /* Verify the large resource type (name) against the max */ |
| |
| if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) { |
| return (AE_AML_INVALID_RESOURCE_TYPE); |
| } |
| |
| /* |
| * Large Resource Type -- bits 6:0 contain the name |
| * Translate range 0x80-0x8B to index range 0x10-0x1B |
| */ |
| resource_index = (u8) (resource_type - 0x70); |
| } else { |
| /* |
| * Small Resource Type -- bits 6:3 contain the name |
| * Shift range to index range 0x00-0x0F |
| */ |
| resource_index = (u8) |
| ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); |
| } |
| |
| /* Check validity of the resource type, zero indicates name is invalid */ |
| |
| if (!acpi_gbl_resource_types[resource_index]) { |
| return (AE_AML_INVALID_RESOURCE_TYPE); |
| } |
| |
| /* |
| * 2) Validate the resource_length field. This ensures that the length |
| * is at least reasonable, and guarantees that it is non-zero. |
| */ |
| resource_length = acpi_ut_get_resource_length(aml); |
| minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; |
| |
| /* Validate based upon the type of resource - fixed length or variable */ |
| |
| switch (acpi_gbl_resource_types[resource_index]) { |
| case ACPI_FIXED_LENGTH: |
| |
| /* Fixed length resource, length must match exactly */ |
| |
| if (resource_length != minimum_resource_length) { |
| return (AE_AML_BAD_RESOURCE_LENGTH); |
| } |
| break; |
| |
| case ACPI_VARIABLE_LENGTH: |
| |
| /* Variable length resource, length must be at least the minimum */ |
| |
| if (resource_length < minimum_resource_length) { |
| return (AE_AML_BAD_RESOURCE_LENGTH); |
| } |
| break; |
| |
| case ACPI_SMALL_VARIABLE_LENGTH: |
| |
| /* Small variable length resource, length can be (Min) or (Min-1) */ |
| |
| if ((resource_length > minimum_resource_length) || |
| (resource_length < (minimum_resource_length - 1))) { |
| return (AE_AML_BAD_RESOURCE_LENGTH); |
| } |
| break; |
| |
| default: |
| |
| /* Shouldn't happen (because of validation earlier), but be sure */ |
| |
| return (AE_AML_INVALID_RESOURCE_TYPE); |
| } |
| |
| /* Optionally return the resource table index */ |
| |
| if (return_index) { |
| *return_index = resource_index; |
| } |
| |
| return (AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_get_resource_type |
| * |
| * PARAMETERS: Aml - Pointer to the raw AML resource descriptor |
| * |
| * RETURN: The Resource Type with no extraneous bits (except the |
| * Large/Small descriptor bit -- this is left alone) |
| * |
| * DESCRIPTION: Extract the Resource Type/Name from the first byte of |
| * a resource descriptor. |
| * |
| ******************************************************************************/ |
| |
| u8 acpi_ut_get_resource_type(void *aml) |
| { |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* |
| * Byte 0 contains the descriptor name (Resource Type) |
| * Examine the large/small bit in the resource header |
| */ |
| if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { |
| /* Large Resource Type -- bits 6:0 contain the name */ |
| |
| return (ACPI_GET8(aml)); |
| } else { |
| /* Small Resource Type -- bits 6:3 contain the name */ |
| |
| return ((u8) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_MASK)); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_get_resource_length |
| * |
| * PARAMETERS: Aml - Pointer to the raw AML resource descriptor |
| * |
| * RETURN: Byte Length |
| * |
| * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By |
| * definition, this does not include the size of the descriptor |
| * header or the length field itself. |
| * |
| ******************************************************************************/ |
| |
| u16 acpi_ut_get_resource_length(void *aml) |
| { |
| acpi_rs_length resource_length; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* |
| * Byte 0 contains the descriptor name (Resource Type) |
| * Examine the large/small bit in the resource header |
| */ |
| if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { |
| /* Large Resource type -- bytes 1-2 contain the 16-bit length */ |
| |
| ACPI_MOVE_16_TO_16(&resource_length, ACPI_ADD_PTR(u8, aml, 1)); |
| |
| } else { |
| /* Small Resource type -- bits 2:0 of byte 0 contain the length */ |
| |
| resource_length = (u16) (ACPI_GET8(aml) & |
| ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK); |
| } |
| |
| return (resource_length); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_get_resource_header_length |
| * |
| * PARAMETERS: Aml - Pointer to the raw AML resource descriptor |
| * |
| * RETURN: Length of the AML header (depends on large/small descriptor) |
| * |
| * DESCRIPTION: Get the length of the header for this resource. |
| * |
| ******************************************************************************/ |
| |
| u8 acpi_ut_get_resource_header_length(void *aml) |
| { |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* Examine the large/small bit in the resource header */ |
| |
| if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { |
| return (sizeof(struct aml_resource_large_header)); |
| } else { |
| return (sizeof(struct aml_resource_small_header)); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_get_descriptor_length |
| * |
| * PARAMETERS: Aml - Pointer to the raw AML resource descriptor |
| * |
| * RETURN: Byte length |
| * |
| * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the |
| * length of the descriptor header and the length field itself. |
| * Used to walk descriptor lists. |
| * |
| ******************************************************************************/ |
| |
| u32 acpi_ut_get_descriptor_length(void *aml) |
| { |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* |
| * Get the Resource Length (does not include header length) and add |
| * the header length (depends on if this is a small or large resource) |
| */ |
| return (acpi_ut_get_resource_length(aml) + |
| acpi_ut_get_resource_header_length(aml)); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_get_resource_end_tag |
| * |
| * PARAMETERS: obj_desc - The resource template buffer object |
| * end_tag - Where the pointer to the end_tag is returned |
| * |
| * RETURN: Status, pointer to the end tag |
| * |
| * DESCRIPTION: Find the end_tag resource descriptor in an AML resource template |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc, |
| u8 ** end_tag) |
| { |
| acpi_status status; |
| u8 *aml; |
| u8 *end_aml; |
| |
| ACPI_FUNCTION_TRACE("ut_get_resource_end_tag"); |
| |
| /* Get start and end pointers */ |
| |
| aml = obj_desc->buffer.pointer; |
| end_aml = aml + obj_desc->buffer.length; |
| |
| /* Walk the resource template, one descriptor per iteration */ |
| |
| while (aml < end_aml) { |
| /* Validate the Resource Type and Resource Length */ |
| |
| status = acpi_ut_validate_resource(aml, NULL); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* end_tag resource indicates the end of the resource template */ |
| |
| if (acpi_ut_get_resource_type(aml) == |
| ACPI_RESOURCE_NAME_END_TAG) { |
| /* Return the pointer to the end_tag */ |
| |
| *end_tag = aml; |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* |
| * Point to the next resource descriptor in the AML buffer. The |
| * descriptor length is guaranteed to be non-zero by resource |
| * validation above. |
| */ |
| aml += acpi_ut_get_descriptor_length(aml); |
| } |
| |
| /* Did not find an end_tag resource descriptor */ |
| |
| return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); |
| } |