OMAP4: ID: add omap_has_feature for max freq supported
Macros for identifying the max frequency supported by various
OMAP4 variants - Expanding along the lines of OMAP3's feature
handling.
[nm@ti.com: minor fixes for checks that should only for 443x|446x]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 743889a..37efb86 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -31,7 +31,7 @@
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
-u32 omap3_features;
+u32 omap_features;
unsigned int omap_rev(void)
{
@@ -183,14 +183,14 @@
#define OMAP3_CHECK_FEATURE(status,feat) \
if (((status & OMAP3_ ##feat## _MASK) \
>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
- omap3_features |= OMAP3_HAS_ ##feat; \
+ omap_features |= OMAP3_HAS_ ##feat; \
}
static void __init omap3_check_features(void)
{
u32 status;
- omap3_features = 0;
+ omap_features = 0;
status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
@@ -200,11 +200,11 @@
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
if (cpu_is_omap3630())
- omap3_features |= OMAP3_HAS_192MHZ_CLK;
+ omap_features |= OMAP3_HAS_192MHZ_CLK;
if (!cpu_is_omap3505() && !cpu_is_omap3517())
- omap3_features |= OMAP3_HAS_IO_WAKEUP;
+ omap_features |= OMAP3_HAS_IO_WAKEUP;
- omap3_features |= OMAP3_HAS_SDRC;
+ omap_features |= OMAP3_HAS_SDRC;
/*
* TODO: Get additional info (where applicable)
@@ -212,9 +212,34 @@
*/
}
+static void __init omap4_check_features(void)
+{
+ u32 si_type;
+
+ if (cpu_is_omap443x())
+ omap_features |= OMAP4_HAS_MPU_1GHZ;
+
+
+ if (cpu_is_omap446x()) {
+ si_type =
+ read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1);
+ switch ((si_type & (3 << 16)) >> 16) {
+ case 2:
+ /* High performance device */
+ omap_features |= OMAP4_HAS_MPU_1_5GHZ;
+ break;
+ case 1:
+ default:
+ /* Standard device */
+ omap_features |= OMAP4_HAS_MPU_1_2GHZ;
+ break;
+ }
+ }
+}
+
static void __init ti816x_check_features(void)
{
- omap3_features = OMAP3_HAS_NEON;
+ omap_features = OMAP3_HAS_NEON;
}
static void __init omap3_check_revision(void)
@@ -527,6 +552,7 @@
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
+ omap4_check_features();
return;
} else {
pr_err("OMAP revision unknown, please fix!\n");