diff --git a/drivers/staging/rt2860/ap.h b/drivers/staging/rt2860/ap.h
index 97da749..c7ff694 100644
--- a/drivers/staging/rt2860/ap.h
+++ b/drivers/staging/rt2860/ap.h
@@ -40,7 +40,7 @@
 #ifndef __AP_H__
 #define __AP_H__
 
-// ap_wpa.c
+/* ap_wpa.c */
 VOID WpaStateMachineInit(IN PRTMP_ADAPTER pAd,
 			 IN STATE_MACHINE * Sm, OUT STATE_MACHINE_FUNC Trans[]);
 
@@ -48,7 +48,7 @@
 VOID BeaconUpdateExec(IN PVOID SystemSpecific1,
 		      IN PVOID FunctionContext,
 		      IN PVOID SystemSpecific2, IN PVOID SystemSpecific3);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 VOID RTMPSetPiggyBack(IN PRTMP_ADAPTER pAd, IN BOOLEAN bPiggyBack);
 
@@ -63,4 +63,4 @@
 
 MAC_TABLE_ENTRY *MacTableLookup(IN PRTMP_ADAPTER pAd, IN PUCHAR pAddr);
 
-#endif // __AP_H__
+#endif /* __AP_H__ */
diff --git a/drivers/staging/rt2860/chip/mac_pci.h b/drivers/staging/rt2860/chip/mac_pci.h
index b0aa0d3..34f7b9a 100644
--- a/drivers/staging/rt2860/chip/mac_pci.h
+++ b/drivers/staging/rt2860/chip/mac_pci.h
@@ -178,7 +178,6 @@
 
 #define NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, freeNum, _TxFrameType) \
 		(((freeNum != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 0)) || (freeNum<3))
-		//(((freeNum) != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 1 /*0*/))
 
 #define HAL_KickOutMgmtTx(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen)	\
 			RtmpPCIMgmtKickOut(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen)
diff --git a/drivers/staging/rt2860/chip/mac_usb.h b/drivers/staging/rt2860/chip/mac_usb.h
index 8ce6969..fe7ba28b 100644
--- a/drivers/staging/rt2860/chip/mac_usb.h
+++ b/drivers/staging/rt2860/chip/mac_usb.h
@@ -46,18 +46,18 @@
 #define USB_CYC_CFG				0x02a4
 
 #define BEACON_RING_SIZE		2
-#define MGMTPIPEIDX				0	// EP6 is highest priority
+#define MGMTPIPEIDX				0	/* EP6 is highest priority */
 
-#define RTMP_PKT_TAIL_PADDING	11	// 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding)
+#define RTMP_PKT_TAIL_PADDING	11	/* 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding) */
 
 #define fRTMP_ADAPTER_NEED_STOP_TX		\
 		(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS |	\
 		 fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_BULKOUT_RESET | \
 		 fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_REMOVE_IN_PROGRESS)
 
-//
-// RXINFO appends at the end of each rx packet.
-//
+/* */
+/* RXINFO appends at the end of each rx packet. */
+/* */
 #define RXINFO_SIZE				4
 #define RT2870_RXDMALEN_FIELD_SIZE	4
 
@@ -66,17 +66,17 @@
 	UINT32 DATA:1;
 	UINT32 NULLDATA:1;
 	UINT32 FRAG:1;
-	UINT32 U2M:1;		// 1: this RX frame is unicast to me
-	UINT32 Mcast:1;		// 1: this is a multicast frame
-	UINT32 Bcast:1;		// 1: this is a broadcast frame
-	UINT32 MyBss:1;		// 1: this frame belongs to the same BSSID
-	UINT32 Crc:1;		// 1: CRC error
-	UINT32 CipherErr:2;	// 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32 AMSDU:1;		// rx with 802.3 header, not 802.11 header.
+	UINT32 U2M:1;		/* 1: this RX frame is unicast to me */
+	UINT32 Mcast:1;		/* 1: this is a multicast frame */
+	UINT32 Bcast:1;		/* 1: this is a broadcast frame */
+	UINT32 MyBss:1;		/* 1: this frame belongs to the same BSSID */
+	UINT32 Crc:1;		/* 1: CRC error */
+	UINT32 CipherErr:2;	/* 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid */
+	UINT32 AMSDU:1;		/* rx with 802.3 header, not 802.11 header. */
 	UINT32 HTC:1;
 	UINT32 RSSI:1;
 	UINT32 L2PAD:1;
-	UINT32 AMPDU:1;		// To be moved
+	UINT32 AMPDU:1;		/* To be moved */
 	UINT32 Decrypted:1;
 	UINT32 PlcpRssil:1;
 	UINT32 CipherAlg:1;
@@ -84,35 +84,35 @@
 	UINT32 PlcpSignal:12;
 } RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
 
-//
-// TXINFO
-//
+/* */
+/* TXINFO */
+/* */
 #define TXINFO_SIZE				4
 
 typedef struct _TXINFO_STRUC {
-	// Word 0
-	UINT32 USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
+	/* Word 0 */
+	UINT32 USBDMATxPktLen:16;	/*used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame. */
 	UINT32 rsv:8;
-	UINT32 WIV:1;		// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32 QSEL:2;		// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32 SwUseLastRound:1;	// Software use.
-	UINT32 rsv2:2;		// Software use.
-	UINT32 USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
-	UINT32 USBDMATxburst:1;	//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
+	UINT32 WIV:1;		/* Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition */
+	UINT32 QSEL:2;		/* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */
+	UINT32 SwUseLastRound:1;	/* Software use. */
+	UINT32 rsv2:2;		/* Software use. */
+	UINT32 USBDMANextVLD:1;	/*used ONLY in USB bulk Aggregation, NextValid */
+	UINT32 USBDMATxburst:1;	/*used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint */
 } TXINFO_STRUC, *PTXINFO_STRUC;
 
-//
-// Management ring buffer format
-//
+/* */
+/* Management ring buffer format */
+/* */
 typedef struct _MGMT_STRUC {
 	BOOLEAN Valid;
 	PUCHAR pBuffer;
 	ULONG Length;
 } MGMT_STRUC, *PMGMT_STRUC;
 
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
+/*////////////////////////////////////////////////////////////////////////// */
+/* The TX_BUFFER structure forms the transmitted USB packet to the device */
+/*////////////////////////////////////////////////////////////////////////// */
 typedef struct __TX_BUFFER {
 	union {
 		UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
@@ -120,7 +120,7 @@
 		PSPOLL_FRAME PsPollPacket;
 		RTS_FRAME RTSFrame;
 	} field;
-	UCHAR Aggregation[4];	//Buffer for save Aggregation size.
+	UCHAR Aggregation[4];	/*Buffer for save Aggregation size. */
 } TX_BUFFER, *PTX_BUFFER;
 
 typedef struct __HTTX_BUFFER {
@@ -130,22 +130,22 @@
 		PSPOLL_FRAME PsPollPacket;
 		RTS_FRAME RTSFrame;
 	} field;
-	UCHAR Aggregation[4];	//Buffer for save Aggregation size.
+	UCHAR Aggregation[4];	/*Buffer for save Aggregation size. */
 } HTTX_BUFFER, *PHTTX_BUFFER;
 
-// used to track driver-generated write irps
+/* used to track driver-generated write irps */
 typedef struct _TX_CONTEXT {
-	PVOID pAd;		//Initialized in MiniportInitialize
-	PURB pUrb;		//Initialized in MiniportInitialize
-	PIRP pIrp;		//used to cancel pending bulk out.
-	//Initialized in MiniportInitialize
-	PTX_BUFFER TransferBuffer;	//Initialized in MiniportInitialize
+	PVOID pAd;		/*Initialized in MiniportInitialize */
+	PURB pUrb;		/*Initialized in MiniportInitialize */
+	PIRP pIrp;		/*used to cancel pending bulk out. */
+	/*Initialized in MiniportInitialize */
+	PTX_BUFFER TransferBuffer;	/*Initialized in MiniportInitialize */
 	ULONG BulkOutSize;
 	UCHAR BulkOutPipeId;
 	UCHAR SelfIdx;
 	BOOLEAN InUse;
-	BOOLEAN bWaitingBulkOut;	// at least one packet is in this TxContext, ready for making IRP anytime.
-	BOOLEAN bFullForBulkOut;	// all tx buffer are full , so waiting for tx bulkout.
+	BOOLEAN bWaitingBulkOut;	/* at least one packet is in this TxContext, ready for making IRP anytime. */
+	BOOLEAN bFullForBulkOut;	/* all tx buffer are full , so waiting for tx bulkout. */
 	BOOLEAN IRPPending;
 	BOOLEAN LastOne;
 	BOOLEAN bAggregatible;
@@ -153,18 +153,18 @@
 	UCHAR Rsv[2];
 	ULONG DataOffset;
 	UINT TxRate;
-	dma_addr_t data_dma;	// urb dma on linux
+	dma_addr_t data_dma;	/* urb dma on linux */
 
 } TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
 
-// used to track driver-generated write irps
+/* used to track driver-generated write irps */
 typedef struct _HT_TX_CONTEXT {
-	PVOID pAd;		//Initialized in MiniportInitialize
-	PURB pUrb;		//Initialized in MiniportInitialize
-	PIRP pIrp;		//used to cancel pending bulk out.
-	//Initialized in MiniportInitialize
-	PHTTX_BUFFER TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
+	PVOID pAd;		/*Initialized in MiniportInitialize */
+	PURB pUrb;		/*Initialized in MiniportInitialize */
+	PIRP pIrp;		/*used to cancel pending bulk out. */
+	/*Initialized in MiniportInitialize */
+	PHTTX_BUFFER TransferBuffer;	/*Initialized in MiniportInitialize */
+	ULONG BulkOutSize;	/* Indicate the total bulk-out size in bytes in one bulk-transmission */
 	UCHAR BulkOutPipeId;
 	BOOLEAN IRPPending;
 	BOOLEAN LastOne;
@@ -173,33 +173,33 @@
 	BOOLEAN bCopySavePad;
 	UCHAR SavedPad[8];
 	UCHAR Header_802_3[LENGTH_802_3];
-	ULONG CurWritePosition;	// Indicate the buffer offset which packet will be inserted start from.
-	ULONG CurWriteRealPos;	// Indicate the buffer offset which packet now are writing to.
-	ULONG NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
-	ULONG ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
+	ULONG CurWritePosition;	/* Indicate the buffer offset which packet will be inserted start from. */
+	ULONG CurWriteRealPos;	/* Indicate the buffer offset which packet now are writing to. */
+	ULONG NextBulkOutPosition;	/* Indicate the buffer start offset of a bulk-transmission */
+	ULONG ENextBulkOutPosition;	/* Indicate the buffer end offset of a bulk-transmission */
 	UINT TxRate;
-	dma_addr_t data_dma;	// urb dma on linux
+	dma_addr_t data_dma;	/* urb dma on linux */
 } HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
 
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
+/* */
+/* Structure to keep track of receive packets and buffers to indicate */
+/* receive data to the protocol. */
+/* */
 typedef struct _RX_CONTEXT {
 	PUCHAR TransferBuffer;
 	PVOID pAd;
-	PIRP pIrp;		//used to cancel pending bulk in.
+	PIRP pIrp;		/*used to cancel pending bulk in. */
 	PURB pUrb;
-	//These 2 Boolean shouldn't both be 1 at the same time.
-	ULONG BulkInOffset;	// number of packets waiting for reordering .
-//      BOOLEAN                         ReorderInUse;   // At least one packet in this buffer are in reordering buffer and wait for receive indication
-	BOOLEAN bRxHandling;	// Notify this packet is being process now.
-	BOOLEAN InUse;		// USB Hardware Occupied. Wait for USB HW to put packet.
-	BOOLEAN Readable;	// Receive Complete back. OK for driver to indicate receiving packet.
-	BOOLEAN IRPPending;	// TODO: To be removed
+	/*These 2 Boolean shouldn't both be 1 at the same time. */
+	ULONG BulkInOffset;	/* number of packets waiting for reordering . */
+/*      BOOLEAN                         ReorderInUse;   // At least one packet in this buffer are in reordering buffer and wait for receive indication */
+	BOOLEAN bRxHandling;	/* Notify this packet is being process now. */
+	BOOLEAN InUse;		/* USB Hardware Occupied. Wait for USB HW to put packet. */
+	BOOLEAN Readable;	/* Receive Complete back. OK for driver to indicate receiving packet. */
+	BOOLEAN IRPPending;	/* TODO: To be removed */
 	atomic_t IrpLock;
 	NDIS_SPIN_LOCK RxContextLock;
-	dma_addr_t data_dma;	// urb dma on linux
+	dma_addr_t data_dma;	/* urb dma on linux */
 } RX_CONTEXT, *PRX_CONTEXT;
 
 /******************************************************************************
@@ -207,9 +207,9 @@
 	USB Frimware Related MACRO
 
 ******************************************************************************/
-// 8051 firmware image for usb - use last-half base address = 0x3000
+/* 8051 firmware image for usb - use last-half base address = 0x3000 */
 #define FIRMWARE_IMAGE_BASE			0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE		0x1000	// 4kbyte
+#define MAX_FIRMWARE_IMAGE_SIZE		0x1000	/* 4kbyte */
 
 #define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen)		\
 	RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen)
@@ -278,7 +278,7 @@
 #define HAL_KickOutNullFrameTx(_pAd, _QueIdx, _pNullFrame, _frameLen)	\
 			RtmpUSBNullFrameKickOut(_pAd, _QueIdx, _pNullFrame, _frameLen)
 
-#define GET_TXRING_FREENO(_pAd, _QueIdx)	(_QueIdx)	//(_pAd->TxRing[_QueIdx].TxSwFreeIdx)
+#define GET_TXRING_FREENO(_pAd, _QueIdx)	(_QueIdx)	/*(_pAd->TxRing[_QueIdx].TxSwFreeIdx) */
 #define GET_MGMTRING_FREENO(_pAd)			(_pAd->MgmtRing.TxSwFreeIdx)
 
 /* ----------------- RX Related MACRO ----------------- */
@@ -344,4 +344,4 @@
 #define RTMP_MLME_RADIO_OFF(pAd) \
     RT28xxUsbMlmeRadioOFF(pAd);
 
-#endif //__MAC_USB_H__ //
+#endif /*__MAC_USB_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt2860.h b/drivers/staging/rt2860/chip/rt2860.h
index 6b976b4..f30b808 100644
--- a/drivers/staging/rt2860/chip/rt2860.h
+++ b/drivers/staging/rt2860/chip/rt2860.h
@@ -38,17 +38,17 @@
 #error "For RT2880, you should define the compile flag -DRTMP_MAC_PCI"
 #endif
 
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
 #define NIC2860_PCI_DEVICE_ID	0x0601
 #define NIC2860_PCIe_DEVICE_ID	0x0681
-#define NIC2760_PCI_DEVICE_ID	0x0701	// 1T/2R Cardbus ???
-#define NIC2790_PCIe_DEVICE_ID  0x0781	// 1T/2R miniCard
+#define NIC2760_PCI_DEVICE_ID	0x0701	/* 1T/2R Cardbus ??? */
+#define NIC2790_PCIe_DEVICE_ID  0x0781	/* 1T/2R miniCard */
 
 #define VEN_AWT_PCIe_DEVICE_ID	0x1059
 #define VEN_AWT_PCI_VENDOR_ID		0x1A3B
 
 #define EDIMAX_PCI_VENDOR_ID		0x1432
 
-#endif //__RT2860_H__ //
+#endif /*__RT2860_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt2870.h b/drivers/staging/rt2860/chip/rt2870.h
index 5115a37..8263f1b 100644
--- a/drivers/staging/rt2860/chip/rt2870.h
+++ b/drivers/staging/rt2860/chip/rt2870.h
@@ -40,7 +40,7 @@
 #include "../rtmp_type.h"
 #include "mac_usb.h"
 
-//#define RTMP_CHIP_NAME                "RT2870"
+/*#define RTMP_CHIP_NAME                "RT2870" */
 
-#endif // RT2870 //
-#endif //__RT2870_H__ //
+#endif /* RT2870 // */
+#endif /*__RT2870_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt3070.h b/drivers/staging/rt2860/chip/rt3070.h
index 3781d9d..172ce70 100644
--- a/drivers/staging/rt2860/chip/rt3070.h
+++ b/drivers/staging/rt2860/chip/rt3070.h
@@ -58,10 +58,10 @@
 #include "mac_usb.h"
 #include "rt30xx.h"
 
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
 
-#endif // RT3070 //
+#endif /* RT3070 // */
 
-#endif //__RT3070_H__ //
+#endif /*__RT3070_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt3090.h b/drivers/staging/rt2860/chip/rt3090.h
index 92481cc..102b938 100644
--- a/drivers/staging/rt2860/chip/rt3090.h
+++ b/drivers/staging/rt2860/chip/rt3090.h
@@ -60,13 +60,13 @@
 #include "mac_pci.h"
 #include "rt30xx.h"
 
-//
-// Device ID & Vendor ID, these values should match EEPROM value
-//
-#define NIC3090_PCIe_DEVICE_ID  0x3090	// 1T/1R miniCard
-#define NIC3091_PCIe_DEVICE_ID  0x3091	// 1T/2R miniCard
-#define NIC3092_PCIe_DEVICE_ID  0x3092	// 2T/2R miniCard
+/* */
+/* Device ID & Vendor ID, these values should match EEPROM value */
+/* */
+#define NIC3090_PCIe_DEVICE_ID  0x3090	/* 1T/1R miniCard */
+#define NIC3091_PCIe_DEVICE_ID  0x3091	/* 1T/2R miniCard */
+#define NIC3092_PCIe_DEVICE_ID  0x3092	/* 2T/2R miniCard */
 
-#endif // RT3090 //
+#endif /* RT3090 // */
 
-#endif //__RT3090_H__ //
+#endif /*__RT3090_H__ // */
diff --git a/drivers/staging/rt2860/chip/rt30xx.h b/drivers/staging/rt2860/chip/rt30xx.h
index e6aa175..477a205 100644
--- a/drivers/staging/rt2860/chip/rt30xx.h
+++ b/drivers/staging/rt2860/chip/rt30xx.h
@@ -42,6 +42,6 @@
 extern REG_PAIR RT30xx_RFRegTable[];
 extern UCHAR NUM_RF_REG_PARMS;
 
-#endif // RT30xx //
+#endif /* RT30xx // */
 
-#endif //__RT30XX_H__ //
+#endif /*__RT30XX_H__ // */
diff --git a/drivers/staging/rt2860/chip/rtmp_mac.h b/drivers/staging/rt2860/chip/rtmp_mac.h
index 06321c0..dac1577 100644
--- a/drivers/staging/rt2860/chip/rtmp_mac.h
+++ b/drivers/staging/rt2860/chip/rtmp_mac.h
@@ -38,70 +38,70 @@
 #ifndef __RTMP_MAC_H__
 #define __RTMP_MAC_H__
 
-// =================================================================================
-// TX / RX ring descriptor format
-// =================================================================================
+/* ================================================================================= */
+/* TX / RX ring descriptor format */
+/* ================================================================================= */
 
-// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO.
-// MAC block use this TXINFO to control the transmission behavior of this frame.
+/* the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. */
+/* MAC block use this TXINFO to control the transmission behavior of this frame. */
 #define FIFO_MGMT                 0
 #define FIFO_HCCA                 1
 #define FIFO_EDCA                 2
 
-//
-// TXD Wireless Information format for Tx ring and Mgmt Ring
-//
-//txop : for txop mode
-// 0:txop for the MPDU frame will be handles by ASIC by register
-// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
+/* */
+/* TXD Wireless Information format for Tx ring and Mgmt Ring */
+/* */
+/*txop : for txop mode */
+/* 0:txop for the MPDU frame will be handles by ASIC by register */
+/* 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS */
 typedef struct PACKED _TXWI_STRUC {
-	// Word 0
-	// ex: 00 03 00 40 means txop = 3, PHYMODE = 1
-	UINT32 FRAG:1;		// 1 to inform TKIP engine this is a fragment.
-	UINT32 MIMOps:1;	// the remote peer is in dynamic MIMO-PS mode
+	/* Word 0 */
+	/* ex: 00 03 00 40 means txop = 3, PHYMODE = 1 */
+	UINT32 FRAG:1;		/* 1 to inform TKIP engine this is a fragment. */
+	UINT32 MIMOps:1;	/* the remote peer is in dynamic MIMO-PS mode */
 	UINT32 CFACK:1;
 	UINT32 TS:1;
 
 	UINT32 AMPDU:1;
 	UINT32 MpduDensity:3;
-	UINT32 txop:2;		//FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
+	UINT32 txop:2;		/*FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful. */
 	UINT32 rsv:6;
 
 	UINT32 MCS:7;
-	UINT32 BW:1;		//channel bandwidth 20MHz or 40 MHz
+	UINT32 BW:1;		/*channel bandwidth 20MHz or 40 MHz */
 	UINT32 ShortGI:1;
-	UINT32 STBC:2;		// 1: STBC support MCS =0-7,   2,3 : RESERVE
-	UINT32 Ifs:1;		//
-//      UINT32          rsv2:2; //channel bandwidth 20MHz or 40 MHz
+	UINT32 STBC:2;		/* 1: STBC support MCS =0-7,   2,3 : RESERVE */
+	UINT32 Ifs:1;		/* */
+/*      UINT32          rsv2:2; //channel bandwidth 20MHz or 40 MHz */
 	UINT32 rsv2:1;
-	UINT32 TxBF:1;		// 3*3
+	UINT32 TxBF:1;		/* 3*3 */
 	UINT32 PHYMODE:2;
-	// Word1
-	// ex:  1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38
+	/* Word1 */
+	/* ex:  1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38 */
 	UINT32 ACK:1;
 	UINT32 NSEQ:1;
 	UINT32 BAWinSize:6;
 	UINT32 WirelessCliID:8;
 	UINT32 MPDUtotalByteCount:12;
 	UINT32 PacketId:4;
-	//Word2
+	/*Word2 */
 	UINT32 IV;
-	//Word3
+	/*Word3 */
 	UINT32 EIV;
 } TXWI_STRUC, *PTXWI_STRUC;
 
-//
-// RXWI wireless information format, in PBF. invisible in driver.
-//
+/* */
+/* RXWI wireless information format, in PBF. invisible in driver. */
+/* */
 typedef struct PACKED _RXWI_STRUC {
-	// Word 0
+	/* Word 0 */
 	UINT32 WirelessCliID:8;
 	UINT32 KeyIndex:2;
 	UINT32 BSSID:3;
 	UINT32 UDF:3;
 	UINT32 MPDUtotalByteCount:12;
 	UINT32 TID:4;
-	// Word 1
+	/* Word 1 */
 	UINT32 FRAG:4;
 	UINT32 SEQUENCE:12;
 	UINT32 MCS:7;
@@ -109,29 +109,29 @@
 	UINT32 ShortGI:1;
 	UINT32 STBC:2;
 	UINT32 rsv:3;
-	UINT32 PHYMODE:2;	// 1: this RX frame is unicast to me
-	//Word2
+	UINT32 PHYMODE:2;	/* 1: this RX frame is unicast to me */
+	/*Word2 */
 	UINT32 RSSI0:8;
 	UINT32 RSSI1:8;
 	UINT32 RSSI2:8;
 	UINT32 rsv1:8;
-	//Word3
+	/*Word3 */
 	UINT32 SNR0:8;
 	UINT32 SNR1:8;
-	UINT32 FOFFSET:8;	// RT35xx
+	UINT32 FOFFSET:8;	/* RT35xx */
 	UINT32 rsv2:8;
 	/*UINT32                rsv2:16; */
 } RXWI_STRUC, *PRXWI_STRUC;
 
-// =================================================================================
-// Register format
-// =================================================================================
+/* ================================================================================= */
+/* Register format */
+/* ================================================================================= */
 
-//
-// SCH/DMA registers - base address 0x0200
-//
-// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit
-//
+/* */
+/* SCH/DMA registers - base address 0x0200 */
+/* */
+/* INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit */
+/* */
 #define DMA_CSR0		0x200
 #define INT_SOURCE_CSR		0x200
 typedef union _INT_SOURCE_CSR_STRUC {
@@ -139,29 +139,29 @@
 		UINT32 RxDelayINT:1;
 		UINT32 TxDelayINT:1;
 		UINT32 RxDone:1;
-		UINT32 Ac0DmaDone:1;	//4
+		UINT32 Ac0DmaDone:1;	/*4 */
 		UINT32 Ac1DmaDone:1;
 		UINT32 Ac2DmaDone:1;
 		UINT32 Ac3DmaDone:1;
-		UINT32 HccaDmaDone:1;	// bit7
+		UINT32 HccaDmaDone:1;	/* bit7 */
 		UINT32 MgmtDmaDone:1;
-		UINT32 MCUCommandINT:1;	//bit 9
+		UINT32 MCUCommandINT:1;	/*bit 9 */
 		UINT32 RxTxCoherent:1;
 		UINT32 TBTTInt:1;
 		UINT32 PreTBTT:1;
-		UINT32 TXFifoStatusInt:1;	//FIFO Statistics is full, sw should read 0x171c
-		UINT32 AutoWakeup:1;	//bit14
+		UINT32 TXFifoStatusInt:1;	/*FIFO Statistics is full, sw should read 0x171c */
+		UINT32 AutoWakeup:1;	/*bit14 */
 		UINT32 GPTimer:1;
-		UINT32 RxCoherent:1;	//bit16
+		UINT32 RxCoherent:1;	/*bit16 */
 		UINT32 TxCoherent:1;
 		 UINT32:14;
 	} field;
 	UINT32 word;
 } INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
 
-//
-// INT_MASK_CSR:   Interrupt MASK register.   1: the interrupt is mask OFF
-//
+/* */
+/* INT_MASK_CSR:   Interrupt MASK register.   1: the interrupt is mask OFF */
+/* */
 #define INT_MASK_CSR        0x204
 typedef union _INT_MASK_CSR_STRUC {
 	struct {
@@ -228,99 +228,99 @@
 #define WMM_AIFSN_CFG   0x0214
 typedef union _AIFSN_CSR_STRUC {
 	struct {
-		UINT32 Aifsn0:4;	// for AC_BE
-		UINT32 Aifsn1:4;	// for AC_BK
-		UINT32 Aifsn2:4;	// for AC_VI
-		UINT32 Aifsn3:4;	// for AC_VO
+		UINT32 Aifsn0:4;	/* for AC_BE */
+		UINT32 Aifsn1:4;	/* for AC_BK */
+		UINT32 Aifsn2:4;	/* for AC_VI */
+		UINT32 Aifsn3:4;	/* for AC_VO */
 		UINT32 Rsv:16;
 	} field;
 	UINT32 word;
 } AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-//
-// CWMIN_CSR: CWmin for each EDCA AC
-//
+/* */
+/* CWMIN_CSR: CWmin for each EDCA AC */
+/* */
 #define WMM_CWMIN_CFG   0x0218
 typedef union _CWMIN_CSR_STRUC {
 	struct {
-		UINT32 Cwmin0:4;	// for AC_BE
-		UINT32 Cwmin1:4;	// for AC_BK
-		UINT32 Cwmin2:4;	// for AC_VI
-		UINT32 Cwmin3:4;	// for AC_VO
+		UINT32 Cwmin0:4;	/* for AC_BE */
+		UINT32 Cwmin1:4;	/* for AC_BK */
+		UINT32 Cwmin2:4;	/* for AC_VI */
+		UINT32 Cwmin3:4;	/* for AC_VO */
 		UINT32 Rsv:16;
 	} field;
 	UINT32 word;
 } CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
 
-//
-// CWMAX_CSR: CWmin for each EDCA AC
-//
+/* */
+/* CWMAX_CSR: CWmin for each EDCA AC */
+/* */
 #define WMM_CWMAX_CFG   0x021c
 typedef union _CWMAX_CSR_STRUC {
 	struct {
-		UINT32 Cwmax0:4;	// for AC_BE
-		UINT32 Cwmax1:4;	// for AC_BK
-		UINT32 Cwmax2:4;	// for AC_VI
-		UINT32 Cwmax3:4;	// for AC_VO
+		UINT32 Cwmax0:4;	/* for AC_BE */
+		UINT32 Cwmax1:4;	/* for AC_BK */
+		UINT32 Cwmax2:4;	/* for AC_VI */
+		UINT32 Cwmax3:4;	/* for AC_VO */
 		UINT32 Rsv:16;
 	} field;
 	UINT32 word;
 } CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
 
-//
-// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
-//
+/* */
+/* AC_TXOP_CSR0: AC_BK/AC_BE TXOP register */
+/* */
 #define WMM_TXOP0_CFG    0x0220
 typedef union _AC_TXOP_CSR0_STRUC {
 	struct {
-		USHORT Ac0Txop;	// for AC_BK, in unit of 32us
-		USHORT Ac1Txop;	// for AC_BE, in unit of 32us
+		USHORT Ac0Txop;	/* for AC_BK, in unit of 32us */
+		USHORT Ac1Txop;	/* for AC_BE, in unit of 32us */
 	} field;
 	UINT32 word;
 } AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
 
-//
-// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
-//
+/* */
+/* AC_TXOP_CSR1: AC_VO/AC_VI TXOP register */
+/* */
 #define WMM_TXOP1_CFG    0x0224
 typedef union _AC_TXOP_CSR1_STRUC {
 	struct {
-		USHORT Ac2Txop;	// for AC_VI, in unit of 32us
-		USHORT Ac3Txop;	// for AC_VO, in unit of 32us
+		USHORT Ac2Txop;	/* for AC_VI, in unit of 32us */
+		USHORT Ac3Txop;	/* for AC_VO, in unit of 32us */
 	} field;
 	UINT32 word;
 } AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
 
 #define RINGREG_DIFF			0x10
-#define GPIO_CTRL_CFG    0x0228	//MAC_CSR13
+#define GPIO_CTRL_CFG    0x0228	/*MAC_CSR13 */
 #define MCU_CMD_CFG    0x022c
-#define TX_BASE_PTR0     0x0230	//AC_BK base address
+#define TX_BASE_PTR0     0x0230	/*AC_BK base address */
 #define TX_MAX_CNT0      0x0234
 #define TX_CTX_IDX0       0x0238
 #define TX_DTX_IDX0      0x023c
-#define TX_BASE_PTR1     0x0240	//AC_BE base address
+#define TX_BASE_PTR1     0x0240	/*AC_BE base address */
 #define TX_MAX_CNT1      0x0244
 #define TX_CTX_IDX1       0x0248
 #define TX_DTX_IDX1      0x024c
-#define TX_BASE_PTR2     0x0250	//AC_VI base address
+#define TX_BASE_PTR2     0x0250	/*AC_VI base address */
 #define TX_MAX_CNT2      0x0254
 #define TX_CTX_IDX2       0x0258
 #define TX_DTX_IDX2      0x025c
-#define TX_BASE_PTR3     0x0260	//AC_VO base address
+#define TX_BASE_PTR3     0x0260	/*AC_VO base address */
 #define TX_MAX_CNT3      0x0264
 #define TX_CTX_IDX3       0x0268
 #define TX_DTX_IDX3      0x026c
-#define TX_BASE_PTR4     0x0270	//HCCA base address
+#define TX_BASE_PTR4     0x0270	/*HCCA base address */
 #define TX_MAX_CNT4      0x0274
 #define TX_CTX_IDX4       0x0278
 #define TX_DTX_IDX4      0x027c
-#define TX_BASE_PTR5     0x0280	//MGMT base address
+#define TX_BASE_PTR5     0x0280	/*MGMT base address */
 #define  TX_MAX_CNT5     0x0284
 #define TX_CTX_IDX5       0x0288
 #define TX_DTX_IDX5      0x028c
 #define TX_MGMTMAX_CNT      TX_MAX_CNT5
 #define TX_MGMTCTX_IDX       TX_CTX_IDX5
 #define TX_MGMTDTX_IDX      TX_DTX_IDX5
-#define RX_BASE_PTR     0x0290	//RX base address
+#define RX_BASE_PTR     0x0290	/*RX base address */
 #define RX_MAX_CNT      0x0294
 #define RX_CRX_IDX       0x0298
 #define RX_DRX_IDX      0x029c
@@ -328,27 +328,27 @@
 #define USB_DMA_CFG      0x02a0
 typedef union _USB_DMA_CFG_STRUC {
 	struct {
-		UINT32 RxBulkAggTOut:8;	//Rx Bulk Aggregation TimeOut  in unit of 33ns
-		UINT32 RxBulkAggLmt:8;	//Rx Bulk Aggregation Limit  in unit of 256 bytes
-		UINT32 phyclear:1;	//phy watch dog enable. write 1
+		UINT32 RxBulkAggTOut:8;	/*Rx Bulk Aggregation TimeOut  in unit of 33ns */
+		UINT32 RxBulkAggLmt:8;	/*Rx Bulk Aggregation Limit  in unit of 256 bytes */
+		UINT32 phyclear:1;	/*phy watch dog enable. write 1 */
 		UINT32 rsv:2;
-		UINT32 TxClear:1;	//Clear USB DMA TX path
-		UINT32 TxopHalt:1;	//Halt TXOP count down when TX buffer is full.
-		UINT32 RxBulkAggEn:1;	//Enable Rx Bulk Aggregation
-		UINT32 RxBulkEn:1;	//Enable USB DMA Rx
-		UINT32 TxBulkEn:1;	//Enable USB DMA Tx
-		UINT32 EpoutValid:6;	//OUT endpoint data valid
-		UINT32 RxBusy:1;	//USB DMA RX FSM busy
-		UINT32 TxBusy:1;	//USB DMA TX FSM busy
+		UINT32 TxClear:1;	/*Clear USB DMA TX path */
+		UINT32 TxopHalt:1;	/*Halt TXOP count down when TX buffer is full. */
+		UINT32 RxBulkAggEn:1;	/*Enable Rx Bulk Aggregation */
+		UINT32 RxBulkEn:1;	/*Enable USB DMA Rx */
+		UINT32 TxBulkEn:1;	/*Enable USB DMA Tx */
+		UINT32 EpoutValid:6;	/*OUT endpoint data valid */
+		UINT32 RxBusy:1;	/*USB DMA RX FSM busy */
+		UINT32 TxBusy:1;	/*USB DMA TX FSM busy */
 	} field;
 	UINT32 word;
 } USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
 
-//
-//  3  PBF  registers
-//
-//
-// Most are for debug. Driver doesn't touch PBF register.
+/* */
+/*  3  PBF  registers */
+/* */
+/* */
+/* Most are for debug. Driver doesn't touch PBF register. */
 #define PBF_SYS_CTRL	 0x0400
 #define PBF_CFG                 0x0408
 #define PBF_MAX_PCNT	 0x040C
@@ -361,224 +361,224 @@
 
 #ifdef RT30xx
 #ifdef RTMP_EFUSE_SUPPORT
-// eFuse registers
+/* eFuse registers */
 #define EFUSE_CTRL				0x0580
 #define EFUSE_DATA0				0x0590
 #define EFUSE_DATA1				0x0594
 #define EFUSE_DATA2				0x0598
 #define EFUSE_DATA3				0x059c
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
 
 #define OSC_CTRL		0x5a4
 #define PCIE_PHY_TX_ATTENUATION_CTRL	0x05C8
 #define LDO_CFG0				0x05d4
 #define GPIO_SWITCH				0x05dc
 
-//
-//  4  MAC  registers
-//
-//
-//  4.1 MAC SYSTEM  configuration registers (offset:0x1000)
-//
+/* */
+/*  4  MAC  registers */
+/* */
+/* */
+/*  4.1 MAC SYSTEM  configuration registers (offset:0x1000) */
+/* */
 #define MAC_CSR0            0x1000
 typedef union _ASIC_VER_ID_STRUC {
 	struct {
-		USHORT ASICRev;	// reversion  : 0
-		USHORT ASICVer;	// version : 2860
+		USHORT ASICRev;	/* reversion  : 0 */
+		USHORT ASICVer;	/* version : 2860 */
 	} field;
 	UINT32 word;
 } ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-#define MAC_SYS_CTRL            0x1004	//MAC_CSR1
-#define MAC_ADDR_DW0				0x1008	// MAC ADDR DW0
-#define MAC_ADDR_DW1			 0x100c	// MAC ADDR DW1
-//
-// MAC_CSR2: STA MAC register 0
-//
+#define MAC_SYS_CTRL            0x1004	/*MAC_CSR1 */
+#define MAC_ADDR_DW0				0x1008	/* MAC ADDR DW0 */
+#define MAC_ADDR_DW1			 0x100c	/* MAC ADDR DW1 */
+/* */
+/* MAC_CSR2: STA MAC register 0 */
+/* */
 typedef union _MAC_DW0_STRUC {
 	struct {
-		UCHAR Byte0;	// MAC address byte 0
-		UCHAR Byte1;	// MAC address byte 1
-		UCHAR Byte2;	// MAC address byte 2
-		UCHAR Byte3;	// MAC address byte 3
+		UCHAR Byte0;	/* MAC address byte 0 */
+		UCHAR Byte1;	/* MAC address byte 1 */
+		UCHAR Byte2;	/* MAC address byte 2 */
+		UCHAR Byte3;	/* MAC address byte 3 */
 	} field;
 	UINT32 word;
 } MAC_DW0_STRUC, *PMAC_DW0_STRUC;
 
-//
-// MAC_CSR3: STA MAC register 1
-//
+/* */
+/* MAC_CSR3: STA MAC register 1 */
+/* */
 typedef union _MAC_DW1_STRUC {
 	struct {
-		UCHAR Byte4;	// MAC address byte 4
-		UCHAR Byte5;	// MAC address byte 5
+		UCHAR Byte4;	/* MAC address byte 4 */
+		UCHAR Byte5;	/* MAC address byte 5 */
 		UCHAR U2MeMask;
 		UCHAR Rsvd1;
 	} field;
 	UINT32 word;
 } MAC_DW1_STRUC, *PMAC_DW1_STRUC;
 
-#define MAC_BSSID_DW0				0x1010	// MAC BSSID DW0
-#define MAC_BSSID_DW1				0x1014	// MAC BSSID DW1
+#define MAC_BSSID_DW0				0x1010	/* MAC BSSID DW0 */
+#define MAC_BSSID_DW1				0x1014	/* MAC BSSID DW1 */
 
-//
-// MAC_CSR5: BSSID register 1
-//
+/* */
+/* MAC_CSR5: BSSID register 1 */
+/* */
 typedef union _MAC_CSR5_STRUC {
 	struct {
-		UCHAR Byte4;	// BSSID byte 4
-		UCHAR Byte5;	// BSSID byte 5
-		USHORT BssIdMask:2;	// 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID
+		UCHAR Byte4;	/* BSSID byte 4 */
+		UCHAR Byte5;	/* BSSID byte 5 */
+		USHORT BssIdMask:2;	/* 0: one BSSID, 10: 4 BSSID,  01: 2 BSSID , 11: 8BSSID */
 		USHORT MBssBcnNum:3;
 		USHORT Rsvd:11;
 	} field;
 	UINT32 word;
 } MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
 
-#define MAX_LEN_CFG              0x1018	// rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-#define BBP_CSR_CFG			0x101c	//
-//
-// BBP_CSR_CFG: BBP serial control register
-//
+#define MAX_LEN_CFG              0x1018	/* rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 */
+#define BBP_CSR_CFG			0x101c	/* */
+/* */
+/* BBP_CSR_CFG: BBP serial control register */
+/* */
 typedef union _BBP_CSR_CFG_STRUC {
 	struct {
-		UINT32 Value:8;	// Register     value to program into BBP
-		UINT32 RegNum:8;	// Selected     BBP     register
-		UINT32 fRead:1;	// 0: Write BBP, 1: Read BBP
-		UINT32 Busy:1;	// 1: ASIC is busy execute BBP programming.
-		UINT32 BBP_PAR_DUR:1;	// 0: 4 MAC clock cycles  1: 8 MAC clock cycles
-		UINT32 BBP_RW_MODE:1;	// 0: use serial mode  1:parallel
+		UINT32 Value:8;	/* Register     value to program into BBP */
+		UINT32 RegNum:8;	/* Selected     BBP     register */
+		UINT32 fRead:1;	/* 0: Write BBP, 1: Read BBP */
+		UINT32 Busy:1;	/* 1: ASIC is busy execute BBP programming. */
+		UINT32 BBP_PAR_DUR:1;	/* 0: 4 MAC clock cycles  1: 8 MAC clock cycles */
+		UINT32 BBP_RW_MODE:1;	/* 0: use serial mode  1:parallel */
 		 UINT32:12;
 	} field;
 	UINT32 word;
 } BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
 #define RF_CSR_CFG0			0x1020
-//
-// RF_CSR_CFG: RF control register
-//
+/* */
+/* RF_CSR_CFG: RF control register */
+/* */
 typedef union _RF_CSR_CFG0_STRUC {
 	struct {
-		UINT32 RegIdAndContent:24;	// Register     value to program into BBP
-		UINT32 bitwidth:5;	// Selected     BBP     register
-		UINT32 StandbyMode:1;	// 0: high when stand by 1: low when standby
-		UINT32 Sel:1;	// 0:RF_LE0 activate  1:RF_LE1 activate
-		UINT32 Busy:1;	// 0: idle 1: 8busy
+		UINT32 RegIdAndContent:24;	/* Register     value to program into BBP */
+		UINT32 bitwidth:5;	/* Selected     BBP     register */
+		UINT32 StandbyMode:1;	/* 0: high when stand by 1: low when standby */
+		UINT32 Sel:1;	/* 0:RF_LE0 activate  1:RF_LE1 activate */
+		UINT32 Busy:1;	/* 0: idle 1: 8busy */
 	} field;
 	UINT32 word;
 } RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
 #define RF_CSR_CFG1			0x1024
 typedef union _RF_CSR_CFG1_STRUC {
 	struct {
-		UINT32 RegIdAndContent:24;	// Register     value to program into BBP
-		UINT32 RFGap:5;	// Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
-		UINT32 rsv:7;	// 0: idle 1: 8busy
+		UINT32 RegIdAndContent:24;	/* Register     value to program into BBP */
+		UINT32 RFGap:5;	/* Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) */
+		UINT32 rsv:7;	/* 0: idle 1: 8busy */
 	} field;
 	UINT32 word;
 } RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-#define RF_CSR_CFG2			0x1028	//
+#define RF_CSR_CFG2			0x1028	/* */
 typedef union _RF_CSR_CFG2_STRUC {
 	struct {
-		UINT32 RegIdAndContent:24;	// Register     value to program into BBP
-		UINT32 rsv:8;	// 0: idle 1: 8busy
+		UINT32 RegIdAndContent:24;	/* Register     value to program into BBP */
+		UINT32 rsv:8;	/* 0: idle 1: 8busy */
 	} field;
 	UINT32 word;
 } RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-#define LED_CFG				0x102c	//  MAC_CSR14
+#define LED_CFG				0x102c	/*  MAC_CSR14 */
 typedef union _LED_CFG_STRUC {
 	struct {
-		UINT32 OnPeriod:8;	// blinking on period unit 1ms
-		UINT32 OffPeriod:8;	// blinking off period unit 1ms
-		UINT32 SlowBlinkPeriod:6;	// slow blinking period. unit:1ms
+		UINT32 OnPeriod:8;	/* blinking on period unit 1ms */
+		UINT32 OffPeriod:8;	/* blinking off period unit 1ms */
+		UINT32 SlowBlinkPeriod:6;	/* slow blinking period. unit:1ms */
 		UINT32 rsv:2;
-		UINT32 RLedMode:2;	// red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on
-		UINT32 GLedMode:2;	// green Led Mode
-		UINT32 YLedMode:2;	// yellow Led Mode
-		UINT32 LedPolar:1;	// Led Polarity.  0: active low1: active high
+		UINT32 RLedMode:2;	/* red Led Mode    0: off1: blinking upon TX2: periodic slow blinking3: always on */
+		UINT32 GLedMode:2;	/* green Led Mode */
+		UINT32 YLedMode:2;	/* yellow Led Mode */
+		UINT32 LedPolar:1;	/* Led Polarity.  0: active low1: active high */
 		 UINT32:1;
 	} field;
 	UINT32 word;
 } LED_CFG_STRUC, *PLED_CFG_STRUC;
-//
-//  4.2 MAC TIMING  configuration registers (offset:0x1100)
-//
-#define XIFS_TIME_CFG             0x1100	// MAC_CSR8  MAC_CSR9
+/* */
+/*  4.2 MAC TIMING  configuration registers (offset:0x1100) */
+/* */
+#define XIFS_TIME_CFG             0x1100	/* MAC_CSR8  MAC_CSR9 */
 typedef union _IFS_SLOT_CFG_STRUC {
 	struct {
-		UINT32 CckmSifsTime:8;	//  unit 1us. Applied after CCK RX/TX
-		UINT32 OfdmSifsTime:8;	//  unit 1us. Applied after OFDM RX/TX
-		UINT32 OfdmXifsTime:4;	//OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
-		UINT32 EIFS:9;	//  unit 1us
-		UINT32 BBRxendEnable:1;	//  reference RXEND signal to begin XIFS defer
+		UINT32 CckmSifsTime:8;	/*  unit 1us. Applied after CCK RX/TX */
+		UINT32 OfdmSifsTime:8;	/*  unit 1us. Applied after OFDM RX/TX */
+		UINT32 OfdmXifsTime:4;	/*OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND */
+		UINT32 EIFS:9;	/*  unit 1us */
+		UINT32 BBRxendEnable:1;	/*  reference RXEND signal to begin XIFS defer */
 		UINT32 rsv:2;
 	} field;
 	UINT32 word;
 } IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
 
-#define BKOFF_SLOT_CFG             0x1104	//  mac_csr9 last 8 bits
-#define NAV_TIME_CFG             0x1108	// NAV  (MAC_CSR15)
-#define CH_TIME_CFG             0x110C	// Count as channel busy
-#define PBF_LIFE_TIMER             0x1110	//TX/RX MPDU timestamp timer (free run)Unit: 1us
-#define BCN_TIME_CFG             0x1114	// TXRX_CSR9
+#define BKOFF_SLOT_CFG             0x1104	/*  mac_csr9 last 8 bits */
+#define NAV_TIME_CFG             0x1108	/* NAV  (MAC_CSR15) */
+#define CH_TIME_CFG             0x110C	/* Count as channel busy */
+#define PBF_LIFE_TIMER             0x1110	/*TX/RX MPDU timestamp timer (free run)Unit: 1us */
+#define BCN_TIME_CFG             0x1114	/* TXRX_CSR9 */
 
 #define BCN_OFFSET0				0x042C
 #define BCN_OFFSET1				0x0430
 
-//
-// BCN_TIME_CFG : Synchronization control register
-//
+/* */
+/* BCN_TIME_CFG : Synchronization control register */
+/* */
 typedef union _BCN_TIME_CFG_STRUC {
 	struct {
-		UINT32 BeaconInterval:16;	// in unit of 1/16 TU
-		UINT32 bTsfTicking:1;	// Enable TSF auto counting
-		UINT32 TsfSyncMode:2;	// Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+		UINT32 BeaconInterval:16;	/* in unit of 1/16 TU */
+		UINT32 bTsfTicking:1;	/* Enable TSF auto counting */
+		UINT32 TsfSyncMode:2;	/* Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode */
 		UINT32 bTBTTEnable:1;
-		UINT32 bBeaconGen:1;	// Enable beacon generator
+		UINT32 bBeaconGen:1;	/* Enable beacon generator */
 		 UINT32:3;
 		UINT32 TxTimestampCompensate:8;
 	} field;
 	UINT32 word;
 } BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-#define TBTT_SYNC_CFG            0x1118	// txrx_csr10
-#define TSF_TIMER_DW0             0x111C	// Local TSF timer lsb 32 bits. Read-only
-#define TSF_TIMER_DW1             0x1120	// msb 32 bits. Read-only.
-#define TBTT_TIMER		0x1124	// TImer remains till next TBTT. Read-only.  TXRX_CSR14
-#define INT_TIMER_CFG			0x1128	//
-#define INT_TIMER_EN			0x112c	//  GP-timer and pre-tbtt Int enable
-#define CH_IDLE_STA			0x1130	//  channel idle time
-#define CH_BUSY_STA			0x1134	//  channle busy time
-//
-//  4.2 MAC POWER  configuration registers (offset:0x1200)
-//
-#define MAC_STATUS_CFG             0x1200	// old MAC_CSR12
-#define PWR_PIN_CFG             0x1204	// old MAC_CSR12
-#define AUTO_WAKEUP_CFG             0x1208	// old MAC_CSR10
-//
-// AUTO_WAKEUP_CFG: Manual power control / status register
-//
+#define TBTT_SYNC_CFG            0x1118	/* txrx_csr10 */
+#define TSF_TIMER_DW0             0x111C	/* Local TSF timer lsb 32 bits. Read-only */
+#define TSF_TIMER_DW1             0x1120	/* msb 32 bits. Read-only. */
+#define TBTT_TIMER		0x1124	/* TImer remains till next TBTT. Read-only.  TXRX_CSR14 */
+#define INT_TIMER_CFG			0x1128	/* */
+#define INT_TIMER_EN			0x112c	/*  GP-timer and pre-tbtt Int enable */
+#define CH_IDLE_STA			0x1130	/*  channel idle time */
+#define CH_BUSY_STA			0x1134	/*  channle busy time */
+/* */
+/*  4.2 MAC POWER  configuration registers (offset:0x1200) */
+/* */
+#define MAC_STATUS_CFG             0x1200	/* old MAC_CSR12 */
+#define PWR_PIN_CFG             0x1204	/* old MAC_CSR12 */
+#define AUTO_WAKEUP_CFG             0x1208	/* old MAC_CSR10 */
+/* */
+/* AUTO_WAKEUP_CFG: Manual power control / status register */
+/* */
 typedef union _AUTO_WAKEUP_STRUC {
 	struct {
 		UINT32 AutoLeadTime:8;
-		UINT32 NumofSleepingTbtt:7;	// ForceWake has high privilege than PutToSleep when both set
-		UINT32 EnableAutoWakeup:1;	// 0:sleep, 1:awake
+		UINT32 NumofSleepingTbtt:7;	/* ForceWake has high privilege than PutToSleep when both set */
+		UINT32 EnableAutoWakeup:1;	/* 0:sleep, 1:awake */
 		 UINT32:16;
 	} field;
 	UINT32 word;
 } AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-//
-//  4.3 MAC TX  configuration registers (offset:0x1300)
-//
+/* */
+/*  4.3 MAC TX  configuration registers (offset:0x1300) */
+/* */
 
-#define EDCA_AC0_CFG	0x1300	//AC_TXOP_CSR0 0x3474
+#define EDCA_AC0_CFG	0x1300	/*AC_TXOP_CSR0 0x3474 */
 #define EDCA_AC1_CFG	0x1304
 #define EDCA_AC2_CFG	0x1308
 #define EDCA_AC3_CFG	0x130c
 typedef union _EDCA_AC_CFG_STRUC {
 	struct {
-		UINT32 AcTxop:8;	//  in unit of 32us
-		UINT32 Aifsn:4;	// # of slot time
-		UINT32 Cwmin:4;	//
-		UINT32 Cwmax:4;	//unit power of 2
-		 UINT32:12;	//
+		UINT32 AcTxop:8;	/*  in unit of 32us */
+		UINT32 Aifsn:4;	/* # of slot time */
+		UINT32 Cwmin:4;	/* */
+		UINT32 Cwmax:4;	/*unit power of 2 */
+		 UINT32:12;	/* */
 	} field;
 	UINT32 word;
 } EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
@@ -590,7 +590,7 @@
 #define TX_PWR_CFG_3	0x1320
 #define TX_PWR_CFG_4	0x1324
 #define TX_PIN_CFG		0x1328
-#define TX_BAND_CFG	0x132c	// 0x1 use upper 20MHz. 0 juse lower 20MHz
+#define TX_BAND_CFG	0x132c	/* 0x1 use upper 20MHz. 0 juse lower 20MHz */
 #define TX_SW_CFG0		0x1330
 #define TX_SW_CFG1		0x1334
 #define TX_SW_CFG2		0x1338
@@ -601,9 +601,9 @@
 typedef union _TX_RTS_CFG_STRUC {
 	struct {
 		UINT32 AutoRtsRetryLimit:8;
-		UINT32 RtsThres:16;	// unit:byte
-		UINT32 RtsFbkEn:1;	// enable rts rate fallback
-		UINT32 rsv:7;	// 1: HT non-STBC control frame enable
+		UINT32 RtsThres:16;	/* unit:byte */
+		UINT32 RtsFbkEn:1;	/* enable rts rate fallback */
+		UINT32 rsv:7;	/* 1: HT non-STBC control frame enable */
 	} field;
 	UINT32 word;
 } TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
@@ -611,38 +611,38 @@
 typedef union _TX_TIMEOUT_CFG_STRUC {
 	struct {
 		UINT32 rsv:4;
-		UINT32 MpduLifeTime:4;	//  expiration time = 2^(9+MPDU LIFE TIME)  us
-		UINT32 RxAckTimeout:8;	// unit:slot. Used for TX precedure
-		UINT32 TxopTimeout:8;	//TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-		UINT32 rsv2:8;	// 1: HT non-STBC control frame enable
+		UINT32 MpduLifeTime:4;	/*  expiration time = 2^(9+MPDU LIFE TIME)  us */
+		UINT32 RxAckTimeout:8;	/* unit:slot. Used for TX precedure */
+		UINT32 TxopTimeout:8;	/*TXOP timeout value for TXOP truncation.  It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) */
+		UINT32 rsv2:8;	/* 1: HT non-STBC control frame enable */
 	} field;
 	UINT32 word;
 } TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
 #define TX_RTY_CFG	0x134c
 typedef union PACKED _TX_RTY_CFG_STRUC {
 	struct {
-		UINT32 ShortRtyLimit:8;	//  short retry limit
-		UINT32 LongRtyLimit:8;	//long retry limit
-		UINT32 LongRtyThre:12;	// Long retry threshoold
-		UINT32 NonAggRtyMode:1;	// Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-		UINT32 AggRtyMode:1;	// Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer
-		UINT32 TxautoFBEnable:1;	// Tx retry PHY rate auto fallback enable
-		UINT32 rsv:1;	// 1: HT non-STBC control frame enable
+		UINT32 ShortRtyLimit:8;	/*  short retry limit */
+		UINT32 LongRtyLimit:8;	/*long retry limit */
+		UINT32 LongRtyThre:12;	/* Long retry threshoold */
+		UINT32 NonAggRtyMode:1;	/* Non-Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer */
+		UINT32 AggRtyMode:1;	/* Aggregate MPDU retry mode.  0:expired by retry limit, 1: expired by mpdu life timer */
+		UINT32 TxautoFBEnable:1;	/* Tx retry PHY rate auto fallback enable */
+		UINT32 rsv:1;	/* 1: HT non-STBC control frame enable */
 	} field;
 	UINT32 word;
 } TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
 #define TX_LINK_CFG	0x1350
 typedef union PACKED _TX_LINK_CFG_STRUC {
 	struct PACKED {
-		UINT32 RemoteMFBLifeTime:8;	//remote MFB life time. unit : 32us
-		UINT32 MFBEnable:1;	//  TX apply remote MFB 1:enable
-		UINT32 RemoteUMFSEnable:1;	//  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7)
-		UINT32 TxMRQEn:1;	//  MCS request TX enable
-		UINT32 TxRDGEn:1;	// RDG TX enable
-		UINT32 TxCFAckEn:1;	//   Piggyback CF-ACK enable
-		UINT32 rsv:3;	//
-		UINT32 RemotMFB:8;	//  remote MCS feedback
-		UINT32 RemotMFS:8;	//remote MCS feedback sequence number
+		UINT32 RemoteMFBLifeTime:8;	/*remote MFB life time. unit : 32us */
+		UINT32 MFBEnable:1;	/*  TX apply remote MFB 1:enable */
+		UINT32 RemoteUMFSEnable:1;	/*  remote unsolicit  MFB enable.  0: not apply remote remote unsolicit (MFS=7) */
+		UINT32 TxMRQEn:1;	/*  MCS request TX enable */
+		UINT32 TxRDGEn:1;	/* RDG TX enable */
+		UINT32 TxCFAckEn:1;	/*   Piggyback CF-ACK enable */
+		UINT32 rsv:3;	/* */
+		UINT32 RemotMFB:8;	/*  remote MCS feedback */
+		UINT32 RemotMFS:8;	/*remote MCS feedback sequence number */
 	} field;
 	UINT32 word;
 } TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
@@ -677,116 +677,116 @@
 #define LG_FBK_CFG0	0x135c
 typedef union _LG_FBK_CFG0_STRUC {
 	struct {
-		UINT32 OFDMMCS0FBK:4;	//initial value is 0
-		UINT32 OFDMMCS1FBK:4;	//initial value is 0
-		UINT32 OFDMMCS2FBK:4;	//initial value is 1
-		UINT32 OFDMMCS3FBK:4;	//initial value is 2
-		UINT32 OFDMMCS4FBK:4;	//initial value is 3
-		UINT32 OFDMMCS5FBK:4;	//initial value is 4
-		UINT32 OFDMMCS6FBK:4;	//initial value is 5
-		UINT32 OFDMMCS7FBK:4;	//initial value is 6
+		UINT32 OFDMMCS0FBK:4;	/*initial value is 0 */
+		UINT32 OFDMMCS1FBK:4;	/*initial value is 0 */
+		UINT32 OFDMMCS2FBK:4;	/*initial value is 1 */
+		UINT32 OFDMMCS3FBK:4;	/*initial value is 2 */
+		UINT32 OFDMMCS4FBK:4;	/*initial value is 3 */
+		UINT32 OFDMMCS5FBK:4;	/*initial value is 4 */
+		UINT32 OFDMMCS6FBK:4;	/*initial value is 5 */
+		UINT32 OFDMMCS7FBK:4;	/*initial value is 6 */
 	} field;
 	UINT32 word;
 } LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
 #define LG_FBK_CFG1		0x1360
 typedef union _LG_FBK_CFG1_STRUC {
 	struct {
-		UINT32 CCKMCS0FBK:4;	//initial value is 0
-		UINT32 CCKMCS1FBK:4;	//initial value is 0
-		UINT32 CCKMCS2FBK:4;	//initial value is 1
-		UINT32 CCKMCS3FBK:4;	//initial value is 2
+		UINT32 CCKMCS0FBK:4;	/*initial value is 0 */
+		UINT32 CCKMCS1FBK:4;	/*initial value is 0 */
+		UINT32 CCKMCS2FBK:4;	/*initial value is 1 */
+		UINT32 CCKMCS3FBK:4;	/*initial value is 2 */
 		UINT32 rsv:16;
 	} field;
 	UINT32 word;
 } LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
 
-//=======================================================
-//================ Protection Paramater================================
-//=======================================================
-#define CCK_PROT_CFG	0x1364	//CCK Protection
+/*======================================================= */
+/*================ Protection Paramater================================ */
+/*======================================================= */
+#define CCK_PROT_CFG	0x1364	/*CCK Protection */
 #define ASIC_SHORTNAV		1
 #define ASIC_LONGNAV		2
 #define ASIC_RTS		1
 #define ASIC_CTS		2
 typedef union _PROT_CFG_STRUC {
 	struct {
-		UINT32 ProtectRate:16;	//Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
-		UINT32 ProtectCtrl:2;	//Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
-		UINT32 ProtectNav:2;	//TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv
-		UINT32 TxopAllowCck:1;	//CCK TXOP allowance.0:disallow.
-		UINT32 TxopAllowOfdm:1;	//CCK TXOP allowance.0:disallow.
-		UINT32 TxopAllowMM20:1;	//CCK TXOP allowance. 0:disallow.
-		UINT32 TxopAllowMM40:1;	//CCK TXOP allowance.0:disallow.
-		UINT32 TxopAllowGF20:1;	//CCK TXOP allowance.0:disallow.
-		UINT32 TxopAllowGF40:1;	//CCK TXOP allowance.0:disallow.
-		UINT32 RTSThEn:1;	//RTS threshold enable on CCK TX
+		UINT32 ProtectRate:16;	/*Protection control frame rate for CCK TX(RTS/CTS/CFEnd). */
+		UINT32 ProtectCtrl:2;	/*Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv */
+		UINT32 ProtectNav:2;	/*TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect,  2:LongNAVProtect, 3:rsv */
+		UINT32 TxopAllowCck:1;	/*CCK TXOP allowance.0:disallow. */
+		UINT32 TxopAllowOfdm:1;	/*CCK TXOP allowance.0:disallow. */
+		UINT32 TxopAllowMM20:1;	/*CCK TXOP allowance. 0:disallow. */
+		UINT32 TxopAllowMM40:1;	/*CCK TXOP allowance.0:disallow. */
+		UINT32 TxopAllowGF20:1;	/*CCK TXOP allowance.0:disallow. */
+		UINT32 TxopAllowGF40:1;	/*CCK TXOP allowance.0:disallow. */
+		UINT32 RTSThEn:1;	/*RTS threshold enable on CCK TX */
 		UINT32 rsv:5;
 	} field;
 	UINT32 word;
 } PROT_CFG_STRUC, *PPROT_CFG_STRUC;
 
-#define OFDM_PROT_CFG	0x1368	//OFDM Protection
-#define MM20_PROT_CFG	0x136C	//MM20 Protection
-#define MM40_PROT_CFG	0x1370	//MM40 Protection
-#define GF20_PROT_CFG	0x1374	//GF20 Protection
-#define GF40_PROT_CFG	0x1378	//GR40 Protection
-#define EXP_CTS_TIME	0x137C	//
-#define EXP_ACK_TIME	0x1380	//
+#define OFDM_PROT_CFG	0x1368	/*OFDM Protection */
+#define MM20_PROT_CFG	0x136C	/*MM20 Protection */
+#define MM40_PROT_CFG	0x1370	/*MM40 Protection */
+#define GF20_PROT_CFG	0x1374	/*GF20 Protection */
+#define GF40_PROT_CFG	0x1378	/*GR40 Protection */
+#define EXP_CTS_TIME	0x137C	/* */
+#define EXP_ACK_TIME	0x1380	/* */
 
-//
-//  4.4 MAC RX configuration registers (offset:0x1400)
-//
-#define RX_FILTR_CFG	0x1400	//TXRX_CSR0
-#define AUTO_RSP_CFG	0x1404	//TXRX_CSR4
-//
-// TXRX_CSR4: Auto-Responder/
-//
+/* */
+/*  4.4 MAC RX configuration registers (offset:0x1400) */
+/* */
+#define RX_FILTR_CFG	0x1400	/*TXRX_CSR0 */
+#define AUTO_RSP_CFG	0x1404	/*TXRX_CSR4 */
+/* */
+/* TXRX_CSR4: Auto-Responder/ */
+/* */
 typedef union _AUTO_RSP_CFG_STRUC {
 	struct {
 		UINT32 AutoResponderEnable:1;
-		UINT32 BACAckPolicyEnable:1;	// 0:long, 1:short preamble
-		UINT32 CTS40MMode:1;	// Response CTS 40MHz duplicate mode
-		UINT32 CTS40MRef:1;	// Response CTS 40MHz duplicate mode
-		UINT32 AutoResponderPreamble:1;	// 0:long, 1:short preamble
-		UINT32 rsv:1;	// Power bit value in conrtrol frame
-		UINT32 DualCTSEn:1;	// Power bit value in conrtrol frame
-		UINT32 AckCtsPsmBit:1;	// Power bit value in conrtrol frame
+		UINT32 BACAckPolicyEnable:1;	/* 0:long, 1:short preamble */
+		UINT32 CTS40MMode:1;	/* Response CTS 40MHz duplicate mode */
+		UINT32 CTS40MRef:1;	/* Response CTS 40MHz duplicate mode */
+		UINT32 AutoResponderPreamble:1;	/* 0:long, 1:short preamble */
+		UINT32 rsv:1;	/* Power bit value in conrtrol frame */
+		UINT32 DualCTSEn:1;	/* Power bit value in conrtrol frame */
+		UINT32 AckCtsPsmBit:1;	/* Power bit value in conrtrol frame */
 		 UINT32:24;
 	} field;
 	UINT32 word;
 } AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
 
-#define LEGACY_BASIC_RATE	0x1408	//  TXRX_CSR5           0x3054
+#define LEGACY_BASIC_RATE	0x1408	/*  TXRX_CSR5           0x3054 */
 #define HT_BASIC_RATE		0x140c
 #define HT_CTRL_CFG		0x1410
 #define SIFS_COST_CFG		0x1414
-#define RX_PARSER_CFG		0x1418	//Set NAV for all received frames
+#define RX_PARSER_CFG		0x1418	/*Set NAV for all received frames */
 
-//
-//  4.5 MAC Security configuration (offset:0x1500)
-//
-#define TX_SEC_CNT0		0x1500	//
-#define RX_SEC_CNT0		0x1504	//
-#define CCMP_FC_MUTE		0x1508	//
-//
-//  4.6 HCCA/PSMP (offset:0x1600)
-//
+/* */
+/*  4.5 MAC Security configuration (offset:0x1500) */
+/* */
+#define TX_SEC_CNT0		0x1500	/* */
+#define RX_SEC_CNT0		0x1504	/* */
+#define CCMP_FC_MUTE		0x1508	/* */
+/* */
+/*  4.6 HCCA/PSMP (offset:0x1600) */
+/* */
 #define TXOP_HLDR_ADDR0		0x1600
 #define TXOP_HLDR_ADDR1		0x1604
 #define TXOP_HLDR_ET		0x1608
 #define QOS_CFPOLL_RA_DW0		0x160c
 #define QOS_CFPOLL_A1_DW1		0x1610
 #define QOS_CFPOLL_QC		0x1614
-//
-//  4.7 MAC Statistis registers (offset:0x1700)
-//
-#define RX_STA_CNT0		0x1700	//
-#define RX_STA_CNT1		0x1704	//
-#define RX_STA_CNT2		0x1708	//
+/* */
+/*  4.7 MAC Statistis registers (offset:0x1700) */
+/* */
+#define RX_STA_CNT0		0x1700	/* */
+#define RX_STA_CNT1		0x1704	/* */
+#define RX_STA_CNT2		0x1708	/* */
 
-//
-// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
-//
+/* */
+/* RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count */
+/* */
 typedef union _RX_STA_CNT0_STRUC {
 	struct {
 		USHORT CrcErr;
@@ -795,9 +795,9 @@
 	UINT32 word;
 } RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
 
-//
-// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
-//
+/* */
+/* RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count */
+/* */
 typedef union _RX_STA_CNT1_STRUC {
 	struct {
 		USHORT FalseCca;
@@ -806,9 +806,9 @@
 	UINT32 word;
 } RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
 
-//
-// RX_STA_CNT2_STRUC:
-//
+/* */
+/* RX_STA_CNT2_STRUC: */
+/* */
 typedef union _RX_STA_CNT2_STRUC {
 	struct {
 		USHORT RxDupliCount;
@@ -816,10 +816,10 @@
 	} field;
 	UINT32 word;
 } RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-#define TX_STA_CNT0		0x170C	//
-//
-// STA_CSR3: TX Beacon count
-//
+#define TX_STA_CNT0		0x170C	/* */
+/* */
+/* STA_CSR3: TX Beacon count */
+/* */
 typedef union _TX_STA_CNT0_STRUC {
 	struct {
 		USHORT TxFailCount;
@@ -827,10 +827,10 @@
 	} field;
 	UINT32 word;
 } TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-#define TX_STA_CNT1		0x1710	//
-//
-// TX_STA_CNT1: TX tx count
-//
+#define TX_STA_CNT1		0x1710	/* */
+/* */
+/* TX_STA_CNT1: TX tx count */
+/* */
 typedef union _TX_STA_CNT1_STRUC {
 	struct {
 		USHORT TxSuccess;
@@ -838,10 +838,10 @@
 	} field;
 	UINT32 word;
 } TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-#define TX_STA_CNT2		0x1714	//
-//
-// TX_STA_CNT2: TX tx count
-//
+#define TX_STA_CNT2		0x1714	/* */
+/* */
+/* TX_STA_CNT2: TX tx count */
+/* */
 typedef union _TX_STA_CNT2_STRUC {
 	struct {
 		USHORT TxZeroLenCount;
@@ -849,26 +849,26 @@
 	} field;
 	UINT32 word;
 } TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-#define TX_STA_FIFO		0x1718	//
-//
-// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
-//
+#define TX_STA_FIFO		0x1718	/* */
+/* */
+/* TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register */
+/* */
 typedef union PACKED _TX_STA_FIFO_STRUC {
 	struct {
-		UINT32 bValid:1;	// 1:This register contains a valid TX result
+		UINT32 bValid:1;	/* 1:This register contains a valid TX result */
 		UINT32 PidType:4;
-		UINT32 TxSuccess:1;	// Tx No retry success
-		UINT32 TxAggre:1;	// Tx Retry Success
-		UINT32 TxAckRequired:1;	// Tx fail
-		UINT32 wcid:8;	//wireless client index
-//              UINT32          SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
-		UINT32 SuccessRate:13;	//include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
+		UINT32 TxSuccess:1;	/* Tx No retry success */
+		UINT32 TxAggre:1;	/* Tx Retry Success */
+		UINT32 TxAckRequired:1;	/* Tx fail */
+		UINT32 wcid:8;	/*wireless client index */
+/*              UINT32          SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */
+		UINT32 SuccessRate:13;	/*include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */
 		UINT32 TxBF:1;
 		UINT32 Reserve:2;
 	} field;
 	UINT32 word;
 } TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-// Debug counter
+/* Debug counter */
 #define TX_AGG_CNT	0x171c
 typedef union _TX_AGG_CNT_STRUC {
 	struct {
@@ -877,7 +877,7 @@
 	} field;
 	UINT32 word;
 } TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-// Debug counter
+/* Debug counter */
 #define TX_AGG_CNT0	0x1720
 typedef union _TX_AGG_CNT0_STRUC {
 	struct {
@@ -886,7 +886,7 @@
 	} field;
 	UINT32 word;
 } TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-// Debug counter
+/* Debug counter */
 #define TX_AGG_CNT1	0x1724
 typedef union _TX_AGG_CNT1_STRUC {
 	struct {
@@ -903,7 +903,7 @@
 	} field;
 	UINT32 word;
 } TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-// Debug counter
+/* Debug counter */
 #define TX_AGG_CNT3	0x172c
 typedef union _TX_AGG_CNT3_STRUC {
 	struct {
@@ -912,7 +912,7 @@
 	} field;
 	UINT32 word;
 } TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-// Debug counter
+/* Debug counter */
 #define TX_AGG_CNT4	0x1730
 typedef union _TX_AGG_CNT4_STRUC {
 	struct {
@@ -948,32 +948,32 @@
 #define MPDU_DENSITY_CNT		0x1740
 typedef union _MPDU_DEN_CNT_STRUC {
 	struct {
-		USHORT TXZeroDelCount;	//TX zero length delimiter count
-		USHORT RXZeroDelCount;	//RX zero length delimiter count
+		USHORT TXZeroDelCount;	/*TX zero length delimiter count */
+		USHORT RXZeroDelCount;	/*RX zero length delimiter count */
 	} field;
 	UINT32 word;
 } MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-//
-// TXRX control registers - base address 0x3000
-//
-// rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+/* */
+/* TXRX control registers - base address 0x3000 */
+/* */
+/* rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first.. */
 #define TXRX_CSR1           0x77d0
 
-//
-// Security key table memory, base address = 0x1000
-//
-#define MAC_WCID_BASE		0x1800	//8-bytes(use only 6-bytes) * 256 entry =
+/* */
+/* Security key table memory, base address = 0x1000 */
+/* */
+#define MAC_WCID_BASE		0x1800	/*8-bytes(use only 6-bytes) * 256 entry = */
 #define HW_WCID_ENTRY_SIZE   8
-#define PAIRWISE_KEY_TABLE_BASE     0x4000	// 32-byte * 256-entry =  -byte
+#define PAIRWISE_KEY_TABLE_BASE     0x4000	/* 32-byte * 256-entry =  -byte */
 #define HW_KEY_ENTRY_SIZE           0x20
-#define PAIRWISE_IVEIV_TABLE_BASE     0x6000	// 8-byte * 256-entry =  -byte
-#define MAC_IVEIV_TABLE_BASE     0x6000	// 8-byte * 256-entry =  -byte
+#define PAIRWISE_IVEIV_TABLE_BASE     0x6000	/* 8-byte * 256-entry =  -byte */
+#define MAC_IVEIV_TABLE_BASE     0x6000	/* 8-byte * 256-entry =  -byte */
 #define HW_IVEIV_ENTRY_SIZE   8
-#define MAC_WCID_ATTRIBUTE_BASE     0x6800	// 4-byte * 256-entry =  -byte
+#define MAC_WCID_ATTRIBUTE_BASE     0x6800	/* 4-byte * 256-entry =  -byte */
 #define HW_WCID_ATTRI_SIZE   4
 #define WCID_RESERVED			0x6bfc
-#define SHARED_KEY_TABLE_BASE       0x6c00	// 32-byte * 16-entry = 512-byte
-#define SHARED_KEY_MODE_BASE       0x7000	// 32-byte * 16-entry = 512-byte
+#define SHARED_KEY_TABLE_BASE       0x6c00	/* 32-byte * 16-entry = 512-byte */
+#define SHARED_KEY_MODE_BASE       0x7000	/* 32-byte * 16-entry = 512-byte */
 #define HW_SHARED_KEY_MODE_SIZE   4
 #define SHAREDKEYTABLE			0
 #define PAIRWISEKEYTABLE			1
@@ -999,48 +999,48 @@
 	} field;
 	UINT32 word;
 } SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-// 64-entry for pairwise key table
-typedef struct _HW_WCID_ENTRY {	// 8-byte per entry
+/* 64-entry for pairwise key table */
+typedef struct _HW_WCID_ENTRY {	/* 8-byte per entry */
 	UCHAR Address[6];
 	UCHAR Rsv[2];
 } HW_WCID_ENTRY, PHW_WCID_ENTRY;
 
-// =================================================================================
-// WCID  format
-// =================================================================================
-//7.1   WCID  ENTRY  format  : 8bytes
+/* ================================================================================= */
+/* WCID  format */
+/* ================================================================================= */
+/*7.1   WCID  ENTRY  format  : 8bytes */
 typedef struct _WCID_ENTRY_STRUC {
-	UCHAR RXBABitmap7;	// bit0 for TID8, bit7 for TID 15
-	UCHAR RXBABitmap0;	// bit0 for TID0, bit7 for TID 7
-	UCHAR MAC[6];		// 0 for shared key table.  1 for pairwise key table
+	UCHAR RXBABitmap7;	/* bit0 for TID8, bit7 for TID 15 */
+	UCHAR RXBABitmap0;	/* bit0 for TID0, bit7 for TID 7 */
+	UCHAR MAC[6];		/* 0 for shared key table.  1 for pairwise key table */
 } WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC;
 
-//8.1.1 SECURITY  KEY  format  : 8DW
-// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table
-typedef struct _HW_KEY_ENTRY {	// 32-byte per entry
+/*8.1.1 SECURITY  KEY  format  : 8DW */
+/* 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table */
+typedef struct _HW_KEY_ENTRY {	/* 32-byte per entry */
 	UCHAR Key[16];
 	UCHAR TxMic[8];
 	UCHAR RxMic[8];
 } HW_KEY_ENTRY, *PHW_KEY_ENTRY;
 
-//8.1.2 IV/EIV  format  : 2DW
+/*8.1.2 IV/EIV  format  : 2DW */
 
-//8.1.3 RX attribute entry format  : 1DW
+/*8.1.3 RX attribute entry format  : 1DW */
 typedef struct _MAC_ATTRIBUTE_STRUC {
-	UINT32 KeyTab:1;	// 0 for shared key table.  1 for pairwise key table
+	UINT32 KeyTab:1;	/* 0 for shared key table.  1 for pairwise key table */
 	UINT32 PairKeyMode:3;
-	UINT32 BSSIDIdx:3;	//multipleBSS index for the WCID
+	UINT32 BSSIDIdx:3;	/*multipleBSS index for the WCID */
 	UINT32 RXWIUDF:3;
 	UINT32 rsv:22;
 } MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
 
-// =================================================================================
-// HOST-MCU communication data structure
-// =================================================================================
+/* ================================================================================= */
+/* HOST-MCU communication data structure */
+/* ================================================================================= */
 
-//
-// H2M_MAILBOX_CSR: Host-to-MCU Mailbox
-//
+/* */
+/* H2M_MAILBOX_CSR: Host-to-MCU Mailbox */
+/* */
 typedef union _H2M_MAILBOX_STRUC {
 	struct {
 		UINT32 LowByte:8;
@@ -1051,9 +1051,9 @@
 	UINT32 word;
 } H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
 
-//
-// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
-//
+/* */
+/* M2H_CMD_DONE_CSR: MCU-to-Host command complete indication */
+/* */
 typedef union _M2H_CMD_DONE_STRUC {
 	struct {
 		UINT32 CmdToken0;
@@ -1064,42 +1064,42 @@
 	UINT32 word;
 } M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
 
-//NAV_TIME_CFG :NAV
+/*NAV_TIME_CFG :NAV */
 typedef union _NAV_TIME_CFG_STRUC {
 	struct {
-		UCHAR Sifs;	// in unit of 1-us
-		UCHAR SlotTime;	// in unit of 1-us
-		USHORT Eifs:9;	// in unit of 1-us
-		USHORT ZeroSifs:1;	// Applied zero SIFS timer after OFDM RX 0: disable
+		UCHAR Sifs;	/* in unit of 1-us */
+		UCHAR SlotTime;	/* in unit of 1-us */
+		USHORT Eifs:9;	/* in unit of 1-us */
+		USHORT ZeroSifs:1;	/* Applied zero SIFS timer after OFDM RX 0: disable */
 		USHORT rsv:6;
 	} field;
 	UINT32 word;
 } NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
 
-//
-// RX_FILTR_CFG:  /RX configuration register
-//
+/* */
+/* RX_FILTR_CFG:  /RX configuration register */
+/* */
 typedef union _RX_FILTR_CFG_STRUC {
 	struct {
-		UINT32 DropCRCErr:1;	// Drop CRC error
-		UINT32 DropPhyErr:1;	// Drop physical error
-		UINT32 DropNotToMe:1;	// Drop not to me unicast frame
-		UINT32 DropNotMyBSSID:1;	// Drop fram ToDs bit is true
+		UINT32 DropCRCErr:1;	/* Drop CRC error */
+		UINT32 DropPhyErr:1;	/* Drop physical error */
+		UINT32 DropNotToMe:1;	/* Drop not to me unicast frame */
+		UINT32 DropNotMyBSSID:1;	/* Drop fram ToDs bit is true */
 
-		UINT32 DropVerErr:1;	// Drop version error frame
-		UINT32 DropMcast:1;	// Drop multicast frames
-		UINT32 DropBcast:1;	// Drop broadcast frames
-		UINT32 DropDuplicate:1;	// Drop duplicate frame
+		UINT32 DropVerErr:1;	/* Drop version error frame */
+		UINT32 DropMcast:1;	/* Drop multicast frames */
+		UINT32 DropBcast:1;	/* Drop broadcast frames */
+		UINT32 DropDuplicate:1;	/* Drop duplicate frame */
 
-		UINT32 DropCFEndAck:1;	// Drop Ps-Poll
-		UINT32 DropCFEnd:1;	// Drop Ps-Poll
-		UINT32 DropAck:1;	// Drop Ps-Poll
-		UINT32 DropCts:1;	// Drop Ps-Poll
+		UINT32 DropCFEndAck:1;	/* Drop Ps-Poll */
+		UINT32 DropCFEnd:1;	/* Drop Ps-Poll */
+		UINT32 DropAck:1;	/* Drop Ps-Poll */
+		UINT32 DropCts:1;	/* Drop Ps-Poll */
 
-		UINT32 DropRts:1;	// Drop Ps-Poll
-		UINT32 DropPsPoll:1;	// Drop Ps-Poll
-		UINT32 DropBA:1;	//
-		UINT32 DropBAR:1;	//
+		UINT32 DropRts:1;	/* Drop Ps-Poll */
+		UINT32 DropPsPoll:1;	/* Drop Ps-Poll */
+		UINT32 DropBA:1;	/* */
+		UINT32 DropBAR:1;	/* */
 
 		UINT32 DropRsvCntlType:1;
 		 UINT32:15;
@@ -1107,23 +1107,23 @@
 	UINT32 word;
 } RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
 
-//
-// PHY_CSR4: RF serial control register
-//
+/* */
+/* PHY_CSR4: RF serial control register */
+/* */
 typedef union _PHY_CSR4_STRUC {
 	struct {
-		UINT32 RFRegValue:24;	// Register     value (include register id)     serial out to RF/IF     chip.
-		UINT32 NumberOfBits:5;	// Number of bits used in RFRegValue (I:20,     RFMD:22)
-		UINT32 IFSelect:1;	// 1: select IF to program,     0: select RF to program
-		UINT32 PLL_LD:1;	// RF PLL_LD status
-		UINT32 Busy:1;	// 1: ASIC is busy execute RF programming.
+		UINT32 RFRegValue:24;	/* Register     value (include register id)     serial out to RF/IF     chip. */
+		UINT32 NumberOfBits:5;	/* Number of bits used in RFRegValue (I:20,     RFMD:22) */
+		UINT32 IFSelect:1;	/* 1: select IF to program,     0: select RF to program */
+		UINT32 PLL_LD:1;	/* RF PLL_LD status */
+		UINT32 Busy:1;	/* 1: ASIC is busy execute RF programming. */
 	} field;
 	UINT32 word;
 } PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
 
-//
-// SEC_CSR5: shared key table security mode register
-//
+/* */
+/* SEC_CSR5: shared key table security mode register */
+/* */
 typedef union _SEC_CSR5_STRUC {
 	struct {
 		UINT32 Bss2Key0CipherAlg:3;
@@ -1146,9 +1146,9 @@
 	UINT32 word;
 } SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
 
-//
-// HOST_CMD_CSR: For HOST to interrupt embedded processor
-//
+/* */
+/* HOST_CMD_CSR: For HOST to interrupt embedded processor */
+/* */
 typedef union _HOST_CMD_CSR_STRUC {
 	struct {
 		UINT32 HostCommand:8;
@@ -1157,47 +1157,47 @@
 	UINT32 word;
 } HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
 
-//
-// AIFSN_CSR: AIFSN for each EDCA AC
-//
+/* */
+/* AIFSN_CSR: AIFSN for each EDCA AC */
+/* */
 
-//
-// E2PROM_CSR: EEPROM control register
-//
+/* */
+/* E2PROM_CSR: EEPROM control register */
+/* */
 typedef union _E2PROM_CSR_STRUC {
 	struct {
-		UINT32 Reload:1;	// Reload EEPROM content, write one to reload, self-cleared.
+		UINT32 Reload:1;	/* Reload EEPROM content, write one to reload, self-cleared. */
 		UINT32 EepromSK:1;
 		UINT32 EepromCS:1;
 		UINT32 EepromDI:1;
 		UINT32 EepromDO:1;
-		UINT32 Type:1;	// 1: 93C46, 0:93C66
-		UINT32 LoadStatus:1;	// 1:loading, 0:done
+		UINT32 Type:1;	/* 1: 93C46, 0:93C66 */
+		UINT32 LoadStatus:1;	/* 1:loading, 0:done */
 		UINT32 Rsvd:25;
 	} field;
 	UINT32 word;
 } E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
 
-//
-// QOS_CSR0: TXOP holder address0 register
-//
+/* */
+/* QOS_CSR0: TXOP holder address0 register */
+/* */
 typedef union _QOS_CSR0_STRUC {
 	struct {
-		UCHAR Byte0;	// MAC address byte 0
-		UCHAR Byte1;	// MAC address byte 1
-		UCHAR Byte2;	// MAC address byte 2
-		UCHAR Byte3;	// MAC address byte 3
+		UCHAR Byte0;	/* MAC address byte 0 */
+		UCHAR Byte1;	/* MAC address byte 1 */
+		UCHAR Byte2;	/* MAC address byte 2 */
+		UCHAR Byte3;	/* MAC address byte 3 */
 	} field;
 	UINT32 word;
 } QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
 
-//
-// QOS_CSR1: TXOP holder address1 register
-//
+/* */
+/* QOS_CSR1: TXOP holder address1 register */
+/* */
 typedef union _QOS_CSR1_STRUC {
 	struct {
-		UCHAR Byte4;	// MAC address byte 4
-		UCHAR Byte5;	// MAC address byte 5
+		UCHAR Byte4;	/* MAC address byte 4 */
+		UCHAR Byte5;	/* MAC address byte 5 */
 		UCHAR Rsvd0;
 		UCHAR Rsvd1;
 	} field;
@@ -1207,41 +1207,41 @@
 #define	RF_CSR_CFG	0x500
 typedef union _RF_CSR_CFG_STRUC {
 	struct {
-		UINT RF_CSR_DATA:8;	// DATA
-		UINT TESTCSR_RFACC_REGNUM:5;	// RF register ID
-		UINT Rsvd2:3;	// Reserved
-		UINT RF_CSR_WR:1;	// 0: read  1: write
-		UINT RF_CSR_KICK:1;	// kick RF register read/write
-		UINT Rsvd1:14;	// Reserved
+		UINT RF_CSR_DATA:8;	/* DATA */
+		UINT TESTCSR_RFACC_REGNUM:5;	/* RF register ID */
+		UINT Rsvd2:3;	/* Reserved */
+		UINT RF_CSR_WR:1;	/* 0: read  1: write */
+		UINT RF_CSR_KICK:1;	/* kick RF register read/write */
+		UINT Rsvd1:14;	/* Reserved */
 	} field;
 	UINT word;
 } RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
 
-//
-// Other on-chip shared memory space, base = 0x2000
-//
+/* */
+/* Other on-chip shared memory space, base = 0x2000 */
+/* */
 
-// CIS space - base address = 0x2000
+/* CIS space - base address = 0x2000 */
 #define HW_CIS_BASE             0x2000
 
-// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function.
+/* Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function. */
 #define HW_CS_CTS_BASE			0x7700
-// DFS CTS frame base address. It's where mac stores CTS frame for DFS.
+/* DFS CTS frame base address. It's where mac stores CTS frame for DFS. */
 #define HW_DFS_CTS_BASE			0x7780
 #define HW_CTS_FRAME_SIZE		0x80
 
-// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes
-// to save debugging settings
-#define HW_DEBUG_SETTING_BASE   0x77f0	// 0x77f0~0x77ff total 16 bytes
-#define HW_DEBUG_SETTING_BASE2   0x7770	// 0x77f0~0x77ff total 16 bytes
+/* 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes */
+/* to save debugging settings */
+#define HW_DEBUG_SETTING_BASE   0x77f0	/* 0x77f0~0x77ff total 16 bytes */
+#define HW_DEBUG_SETTING_BASE2   0x7770	/* 0x77f0~0x77ff total 16 bytes */
 
-// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon
-// Three section discontinue memory segments will be used.
-// 1. The original region for BCN 0~3
-// 2. Extract memory from FCE table for BCN 4~5
-// 3. Extract memory from Pair-wise key table for BCN 6~7
-//        It occupied those memory of wcid 238~253 for BCN 6
-//                                                    and wcid 222~237 for BCN 7
+/* In order to support maximum 8 MBSS and its maximum length is 512 for each beacon */
+/* Three section discontinue memory segments will be used. */
+/* 1. The original region for BCN 0~3 */
+/* 2. Extract memory from FCE table for BCN 4~5 */
+/* 3. Extract memory from Pair-wise key table for BCN 6~7 */
+/*        It occupied those memory of wcid 238~253 for BCN 6 */
+/*                                                    and wcid 222~237 for BCN 7 */
 #define HW_BEACON_MAX_SIZE      0x1000	/* unit: byte */
 #define HW_BEACON_BASE0         0x7800
 #define HW_BEACON_BASE1         0x7A00
@@ -1256,7 +1256,7 @@
 #define HW_BEACON_OFFSET		0x0200
 #define HW_BEACON_CONTENT_LEN	(HW_BEACON_OFFSET - TXWI_SIZE)
 
-// HOST-MCU shared memory - base address = 0x2100
+/* HOST-MCU shared memory - base address = 0x2100 */
 #define HOST_CMD_CSR		0x404
 #define H2M_MAILBOX_CSR         0x7010
 #define H2M_MAILBOX_CID         0x7014
@@ -1264,37 +1264,37 @@
 #define H2M_INT_SRC             0x7024
 #define H2M_BBP_AGENT           0x7028
 #define M2H_CMD_DONE_CSR        0x000c
-#define MCU_TXOP_ARRAY_BASE     0x000c	// TODO: to be provided by Albert
-#define MCU_TXOP_ENTRY_SIZE     32	// TODO: to be provided by Albert
-#define MAX_NUM_OF_TXOP_ENTRY   16	// TODO: must be same with 8051 firmware
-#define MCU_MBOX_VERSION        0x01	// TODO: to be confirmed by Albert
-#define MCU_MBOX_VERSION_OFFSET 5	// TODO: to be provided by Albert
+#define MCU_TXOP_ARRAY_BASE     0x000c	/* TODO: to be provided by Albert */
+#define MCU_TXOP_ENTRY_SIZE     32	/* TODO: to be provided by Albert */
+#define MAX_NUM_OF_TXOP_ENTRY   16	/* TODO: must be same with 8051 firmware */
+#define MCU_MBOX_VERSION        0x01	/* TODO: to be confirmed by Albert */
+#define MCU_MBOX_VERSION_OFFSET 5	/* TODO: to be provided by Albert */
 
-//
-// Host DMA registers - base address 0x200 .  TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT,
-//
-//
-//  DMA RING DESCRIPTOR
-//
+/* */
+/* Host DMA registers - base address 0x200 .  TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT, */
+/* */
+/* */
+/*  DMA RING DESCRIPTOR */
+/* */
 #define E2PROM_CSR          0x0004
 #define IO_CNTL_CSR         0x77d0
 
-// ================================================================
-// Tx / Rx / Mgmt ring descriptor definition
-// ================================================================
+/* ================================================================ */
+/* Tx / Rx / Mgmt ring descriptor definition */
+/* ================================================================ */
 
-// the following PID values are used to mark outgoing frame type in TXD->PID so that
-// proper TX statistics can be collected based on these categories
-// b3-2 of PID field -
+/* the following PID values are used to mark outgoing frame type in TXD->PID so that */
+/* proper TX statistics can be collected based on these categories */
+/* b3-2 of PID field - */
 #define PID_MGMT			0x05
 #define PID_BEACON			0x0c
 #define PID_DATA_NORMALUCAST		0x02
 #define PID_DATA_AMPDU		0x04
 #define PID_DATA_NO_ACK		0x08
 #define PID_DATA_NOT_NORM_ACK		0x03
-// value domain of pTxD->HostQId (4-bit: 0~15)
-#define QID_AC_BK               1	// meet ACI definition in 802.11e
-#define QID_AC_BE               0	// meet ACI definition in 802.11e
+/* value domain of pTxD->HostQId (4-bit: 0~15) */
+#define QID_AC_BK               1	/* meet ACI definition in 802.11e */
+#define QID_AC_BE               0	/* meet ACI definition in 802.11e */
 #define QID_AC_VI               2
 #define QID_AC_VO               3
 #define QID_HCCA                4
@@ -1303,4 +1303,4 @@
 #define QID_RX                  14
 #define QID_OTHER               15
 
-#endif // __RTMP_MAC_H__ //
+#endif /* __RTMP_MAC_H__ // */
diff --git a/drivers/staging/rt2860/chip/rtmp_phy.h b/drivers/staging/rt2860/chip/rtmp_phy.h
index bbf920d..fd1a989c 100644
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -74,30 +74,30 @@
 #define RF_R30			30
 #define RF_R31			31
 
-// value domain of pAd->RfIcType
-#define RFIC_2820                   1	// 2.4G 2T3R
-#define RFIC_2850                   2	// 2.4G/5G 2T3R
-#define RFIC_2720                   3	// 2.4G 1T2R
-#define RFIC_2750                   4	// 2.4G/5G 1T2R
-#define RFIC_3020                   5	// 2.4G 1T1R
-#define RFIC_2020                   6	// 2.4G B/G
-#define RFIC_3021                   7	// 2.4G 1T2R
-#define RFIC_3022                   8	// 2.4G 2T2R
-#define RFIC_3052                   9	// 2.4G/5G 2T2R
+/* value domain of pAd->RfIcType */
+#define RFIC_2820                   1	/* 2.4G 2T3R */
+#define RFIC_2850                   2	/* 2.4G/5G 2T3R */
+#define RFIC_2720                   3	/* 2.4G 1T2R */
+#define RFIC_2750                   4	/* 2.4G/5G 1T2R */
+#define RFIC_3020                   5	/* 2.4G 1T1R */
+#define RFIC_2020                   6	/* 2.4G B/G */
+#define RFIC_3021                   7	/* 2.4G 1T2R */
+#define RFIC_3022                   8	/* 2.4G 2T2R */
+#define RFIC_3052                   9	/* 2.4G/5G 2T2R */
 
 /*
 	BBP sections
 */
-#define BBP_R0			0	// version
-#define BBP_R1			1	// TSSI
-#define BBP_R2			2	// TX configure
+#define BBP_R0			0	/* version */
+#define BBP_R1			1	/* TSSI */
+#define BBP_R2			2	/* TX configure */
 #define BBP_R3			3
 #define BBP_R4			4
 #define BBP_R5			5
 #define BBP_R6			6
-#define BBP_R14			14	// RX configure
+#define BBP_R14			14	/* RX configure */
 #define BBP_R16			16
-#define BBP_R17			17	// RX sensibility
+#define BBP_R17			17	/* RX sensibility */
 #define BBP_R18			18
 #define BBP_R21			21
 #define BBP_R22			22
@@ -106,12 +106,12 @@
 #define BBP_R26			26
 #define BBP_R27			27
 #define BBP_R31			31
-#define BBP_R49			49	//TSSI
+#define BBP_R49			49	/*TSSI */
 #define BBP_R50			50
 #define BBP_R51			51
 #define BBP_R52			52
 #define BBP_R55			55
-#define BBP_R62			62	// Rx SQ0 Threshold HIGH
+#define BBP_R62			62	/* Rx SQ0 Threshold HIGH */
 #define BBP_R63			63
 #define BBP_R64			64
 #define BBP_R65			65
@@ -119,7 +119,7 @@
 #define BBP_R67			67
 #define BBP_R68			68
 #define BBP_R69			69
-#define BBP_R70			70	// Rx AGC SQ CCK Xcorr threshold
+#define BBP_R70			70	/* Rx AGC SQ CCK Xcorr threshold */
 #define BBP_R73			73
 #define BBP_R75			75
 #define BBP_R77			77
@@ -133,7 +133,7 @@
 #define BBP_R86			86
 #define BBP_R91			91
 #define BBP_R92			92
-#define BBP_R94			94	// Tx Gain Control
+#define BBP_R94			94	/* Tx Gain Control */
 #define BBP_R103		103
 #define BBP_R105		105
 #define BBP_R106		106
@@ -149,22 +149,22 @@
 #define BBP_R122		122
 #define BBP_R123		123
 #ifdef RT30xx
-#define BBP_R138		138	// add by johnli, RF power sequence setup, ADC dynamic on/off control
-#endif // RT30xx //
+#define BBP_R138		138	/* add by johnli, RF power sequence setup, ADC dynamic on/off control */
+#endif /* RT30xx // */
 
-#define BBPR94_DEFAULT	0x06	// Add 1 value will gain 1db
+#define BBPR94_DEFAULT	0x06	/* Add 1 value will gain 1db */
 
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT  100	// Number of retry before failing access BBP & RF indirect register
+/* */
+/* BBP & RF are using indirect access. Before write any value into it. */
+/* We have to make sure there is no outstanding command pending via checking busy bit. */
+/* */
+#define MAX_BUSY_COUNT  100	/* Number of retry before failing access BBP & RF indirect register */
 
-//#define PHY_TR_SWITCH_TIME          5  // usec
+/*#define PHY_TR_SWITCH_TIME          5  // usec */
 
-//#define BBP_R17_LOW_SENSIBILITY     0x50
-//#define BBP_R17_MID_SENSIBILITY     0x41
-//#define BBP_R17_DYNAMIC_UP_BOUND    0x40
+/*#define BBP_R17_LOW_SENSIBILITY     0x50 */
+/*#define BBP_R17_MID_SENSIBILITY     0x41 */
+/*#define BBP_R17_DYNAMIC_UP_BOUND    0x40 */
 
 #define RSSI_FOR_VERY_LOW_SENSIBILITY   -35
 #define RSSI_FOR_LOW_SENSIBILITY		-58
@@ -194,15 +194,15 @@
 		}                                               \
 	}								\
 }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 #define RTMP_RF_IO_WRITE32(_A, _V)                 RTUSBWriteRFRegister(_A, _V)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #ifdef RT30xx
 #define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV)    RT30xxReadRFRegister(_A, _I, _pV)
 #define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V)    RT30xxWriteRFRegister(_A, _I, _V)
-#endif // RT30xx //
+#endif /* RT30xx // */
 
 /*****************************************************************************
 	BBP register Read/Write marco definitions.
@@ -276,7 +276,7 @@
 	But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
 	will use this function too and didn't access the bbp register via the MCU.
 */
-// Read BBP register by register's ID. Generate PER to test BA
+/* Read BBP register by register's ID. Generate PER to test BA */
 #define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)						\
 {																		\
 	BBP_CSR_CFG_STRUC	BbpCsr;											\
@@ -425,7 +425,7 @@
 	But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
 	will use this function too and didn't access the bbp register via the MCU.
 */
-// Write BBP register by register's ID & value
+/* Write BBP register by register's ID & value */
 #define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)						\
 {																		\
 	BBP_CSR_CFG_STRUC	BbpCsr;											\
@@ -510,7 +510,7 @@
 		DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n"));	\
 	}																		\
 }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 #ifdef RTMP_MAC_USB
 #define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)   RTUSBReadBBPRegister(_A, _I, _pV)
@@ -518,7 +518,7 @@
 
 #define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V)			RTUSBWriteBBPRegister(_A, _I, _V)
 #define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV)		RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #ifdef RT30xx
 #define RTMP_ASIC_MMPS_DISABLE(_pAd)							\
@@ -551,6 +551,6 @@
 		RTMP_IO_WRITE32(_pAd, 0x1210, _macData);				\
 	}while(0)
 
-#endif // RT30xx //
+#endif /* RT30xx // */
 
-#endif // __RTMP_PHY_H__ //
+#endif /* __RTMP_PHY_H__ // */
diff --git a/drivers/staging/rt2860/chlist.h b/drivers/staging/rt2860/chlist.h
index e3d55b4..af8b5ca 100644
--- a/drivers/staging/rt2860/chlist.h
+++ b/drivers/staging/rt2860/chlist.h
@@ -52,14 +52,14 @@
 typedef struct _CH_DESP {
 	UCHAR FirstChannel;
 	UCHAR NumOfCh;
-	CHAR MaxTxPwr;		// dBm
-	UCHAR Geography;	// 0:out door, 1:in door, 2:both
-	BOOLEAN DfsReq;		// Dfs require, 0: No, 1: yes.
+	CHAR MaxTxPwr;		/* dBm */
+	UCHAR Geography;	/* 0:out door, 1:in door, 2:both */
+	BOOLEAN DfsReq;		/* Dfs require, 0: No, 1: yes. */
 } CH_DESP, *PCH_DESP;
 
 typedef struct _CH_REGION {
 	UCHAR CountReg[3];
-	UCHAR DfsType;		// 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
+	UCHAR DfsType;		/* 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56 */
 	CH_DESP ChDesp[10];
 } CH_REGION, *PCH_REGION;
 
@@ -114,4 +114,4 @@
 
 UINT8 GetCuntryMaxTxPwr(IN PRTMP_ADAPTER pAd, IN UINT8 channel);
 
-#endif // __CHLIST_H__
+#endif /* __CHLIST_H__ */
diff --git a/drivers/staging/rt2860/eeprom.h b/drivers/staging/rt2860/eeprom.h
index 56aa583..4d8e8bf 100644
--- a/drivers/staging/rt2860/eeprom.h
+++ b/drivers/staging/rt2860/eeprom.h
@@ -43,25 +43,25 @@
   ************************************************************************/
 int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
 			IN USHORT Offset, OUT USHORT * pValue);
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
 #ifdef RTMP_USB_SUPPORT
 /*************************************************************************
   *	Public function declarations for usb-based prom chipset
   ************************************************************************/
 NTSTATUS RTUSBReadEEPROM16(IN PRTMP_ADAPTER pAd,
 			   IN USHORT offset, OUT PUSHORT pData);
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
 
 #ifdef RT30xx
 #ifdef RTMP_EFUSE_SUPPORT
 int rtmp_ee_efuse_read16(IN RTMP_ADAPTER * pAd,
 			 IN USHORT Offset, OUT USHORT * pValue);
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
+#endif /* RTMP_EFUSE_SUPPORT // */
+#endif /* RT30xx // */
 
 /*************************************************************************
   *	Public function declarations for prom operation callback functions setting
   ************************************************************************/
 INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType);
 
-#endif // __EEPROM_H__ //
+#endif /* __EEPROM_H__ // */
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index cb3cc9b..8585a4d 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -41,18 +41,18 @@
 
 #include "rtmp_dot11.h"
 
-// maximum supported capability information -
-// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
+/* maximum supported capability information - */
+/* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */
 #define SUPPORTED_CAPABILITY_INFO   0x0533
 
 #define END_OF_ARGS                 -1
 #define LFSR_MASK                   0x80000057
-#define MLME_TASK_EXEC_INTV         100/*200*/	//
+#define MLME_TASK_EXEC_INTV         100/*200*/	/* */
 #define LEAD_TIME                   5
-#define MLME_TASK_EXEC_MULTIPLE       10  /*5*/	// MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec
-#define REORDER_EXEC_INTV         	100	// 0.1 sec
+#define MLME_TASK_EXEC_MULTIPLE       10  /*5*/	/* MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec */
+#define REORDER_EXEC_INTV         	100	/* 0.1 sec */
 
-// The definition of Radar detection duration region
+/* The definition of Radar detection duration region */
 #define CE		0
 #define FCC		1
 #define JAP		2
@@ -60,61 +60,61 @@
 #define JAP_W56	4
 #define MAX_RD_REGION 5
 
-#define BEACON_LOST_TIME            4 * OS_HZ	// 2048 msec = 2 sec
+#define BEACON_LOST_TIME            4 * OS_HZ	/* 2048 msec = 2 sec */
 
-#define DLS_TIMEOUT                 1200	// unit: msec
-#define AUTH_TIMEOUT                300	// unit: msec
-#define ASSOC_TIMEOUT               300	// unit: msec
-#define JOIN_TIMEOUT                2000	// unit: msec
-#define SHORT_CHANNEL_TIME          90	// unit: msec
-#define MIN_CHANNEL_TIME            110	// unit: msec, for dual band scan
-#define MAX_CHANNEL_TIME            140	// unit: msec, for single band scan
-#define	FAST_ACTIVE_SCAN_TIME	    30	// Active scan waiting for probe response time
-#define CW_MIN_IN_BITS              4	// actual CwMin = 2^CW_MIN_IN_BITS - 1
-#define LINK_DOWN_TIMEOUT           20000	// unit: msec
-#define AUTO_WAKEUP_TIMEOUT			70	//unit: msec
+#define DLS_TIMEOUT                 1200	/* unit: msec */
+#define AUTH_TIMEOUT                300	/* unit: msec */
+#define ASSOC_TIMEOUT               300	/* unit: msec */
+#define JOIN_TIMEOUT                2000	/* unit: msec */
+#define SHORT_CHANNEL_TIME          90	/* unit: msec */
+#define MIN_CHANNEL_TIME            110	/* unit: msec, for dual band scan */
+#define MAX_CHANNEL_TIME            140	/* unit: msec, for single band scan */
+#define	FAST_ACTIVE_SCAN_TIME	    30	/* Active scan waiting for probe response time */
+#define CW_MIN_IN_BITS              4	/* actual CwMin = 2^CW_MIN_IN_BITS - 1 */
+#define LINK_DOWN_TIMEOUT           20000	/* unit: msec */
+#define AUTO_WAKEUP_TIMEOUT			70	/*unit: msec */
 
-#define CW_MAX_IN_BITS              10	// actual CwMax = 2^CW_MAX_IN_BITS - 1
+#define CW_MAX_IN_BITS              10	/* actual CwMax = 2^CW_MAX_IN_BITS - 1 */
 
-// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
-// SHould not refer to this constant anymore
-//#define RSSI_TO_DBM_OFFSET          120 // for RT2530 RSSI-115 = dBm
-#define RSSI_FOR_MID_TX_POWER       -55	// -55 db is considered mid-distance
-#define RSSI_FOR_LOW_TX_POWER       -45	// -45 db is considered very short distance and
-					// eligible to use a lower TX power
+/* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */
+/* SHould not refer to this constant anymore */
+/*#define RSSI_TO_DBM_OFFSET          120 // for RT2530 RSSI-115 = dBm */
+#define RSSI_FOR_MID_TX_POWER       -55	/* -55 db is considered mid-distance */
+#define RSSI_FOR_LOW_TX_POWER       -45	/* -45 db is considered very short distance and */
+					/* eligible to use a lower TX power */
 #define RSSI_FOR_LOWEST_TX_POWER    -30
-//#define MID_TX_POWER_DELTA          0   // 0 db from full TX power upon mid-distance to AP
-#define LOW_TX_POWER_DELTA          6	// -3 db from full TX power upon very short distance. 1 grade is 0.5 db
-#define LOWEST_TX_POWER_DELTA       16	// -8 db from full TX power upon shortest distance. 1 grade is 0.5 db
+/*#define MID_TX_POWER_DELTA          0   // 0 db from full TX power upon mid-distance to AP */
+#define LOW_TX_POWER_DELTA          6	/* -3 db from full TX power upon very short distance. 1 grade is 0.5 db */
+#define LOWEST_TX_POWER_DELTA       16	/* -8 db from full TX power upon shortest distance. 1 grade is 0.5 db */
 
 #define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD     0
 #define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD   1
 #define RSSI_THRESHOLD_FOR_ROAMING              25
 #define RSSI_DELTA                              5
 
-// Channel Quality Indication
+/* Channel Quality Indication */
 #define CQI_IS_GOOD(cqi)            ((cqi) >= 50)
-//#define CQI_IS_FAIR(cqi)          (((cqi) >= 20) && ((cqi) < 50))
-#define CQI_IS_POOR(cqi)            (cqi < 50)	//(((cqi) >= 5) && ((cqi) < 20))
+/*#define CQI_IS_FAIR(cqi)          (((cqi) >= 20) && ((cqi) < 50)) */
+#define CQI_IS_POOR(cqi)            (cqi < 50)	/*(((cqi) >= 5) && ((cqi) < 20)) */
 #define CQI_IS_BAD(cqi)             (cqi < 5)
 #define CQI_IS_DEAD(cqi)            (cqi == 0)
 
-// weighting factor to calculate Channel quality, total should be 100%
+/* weighting factor to calculate Channel quality, total should be 100% */
 #define RSSI_WEIGHTING                   50
 #define TX_WEIGHTING                     30
 #define RX_WEIGHTING                     20
 
 #define BSS_NOT_FOUND                    0xFFFFFFFF
 
-#define MAX_LEN_OF_MLME_QUEUE            40	//10
+#define MAX_LEN_OF_MLME_QUEUE            40	/*10 */
 
-#define SCAN_PASSIVE                     18	// scan with no probe request, only wait beacon and probe response
-#define SCAN_ACTIVE                      19	// scan with probe request, and wait beacon and probe response
-#define	SCAN_CISCO_PASSIVE				 20	// Single channel passive scan
-#define	SCAN_CISCO_ACTIVE				 21	// Single channel active scan
-#define	SCAN_CISCO_NOISE				 22	// Single channel passive scan for noise histogram collection
-#define	SCAN_CISCO_CHANNEL_LOAD			 23	// Single channel passive scan for channel load collection
-#define FAST_SCAN_ACTIVE                 24	// scan with probe request, and wait beacon and probe response
+#define SCAN_PASSIVE                     18	/* scan with no probe request, only wait beacon and probe response */
+#define SCAN_ACTIVE                      19	/* scan with probe request, and wait beacon and probe response */
+#define	SCAN_CISCO_PASSIVE				 20	/* Single channel passive scan */
+#define	SCAN_CISCO_ACTIVE				 21	/* Single channel active scan */
+#define	SCAN_CISCO_NOISE				 22	/* Single channel passive scan for noise histogram collection */
+#define	SCAN_CISCO_CHANNEL_LOAD			 23	/* Single channel passive scan for channel load collection */
+#define FAST_SCAN_ACTIVE                 24	/* scan with probe request, and wait beacon and probe response */
 
 #define MAC_ADDR_IS_GROUP(Addr)       (((Addr[0]) & 0x01))
 #define MAC_ADDR_HASH(Addr)            (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
@@ -122,13 +122,13 @@
 #define TID_MAC_HASH(Addr,TID)            (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
 #define TID_MAC_HASH_INDEX(Addr,TID)      (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
 
-// LED Control
-// assoiation ON. one LED ON. another blinking when TX, OFF when idle
-// no association, both LED off
+/* LED Control */
+/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */
+/* no association, both LED off */
 #define ASIC_LED_ACT_ON(pAd)        RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
 #define ASIC_LED_ACT_OFF(pAd)       RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
 
-// bit definition of the 2-byte pBEACON->Capability field
+/* bit definition of the 2-byte pBEACON->Capability field */
 #define CAP_IS_ESS_ON(x)                 (((x) & 0x0001) != 0)
 #define CAP_IS_IBSS_ON(x)                (((x) & 0x0002) != 0)
 #define CAP_IS_CF_POLLABLE_ON(x)         (((x) & 0x0004) != 0)
@@ -137,44 +137,44 @@
 #define CAP_IS_SHORT_PREAMBLE_ON(x)      (((x) & 0x0020) != 0)
 #define CAP_IS_PBCC_ON(x)                (((x) & 0x0040) != 0)
 #define CAP_IS_AGILITY_ON(x)             (((x) & 0x0080) != 0)
-#define CAP_IS_SPECTRUM_MGMT(x)          (((x) & 0x0100) != 0)	// 802.11e d9
-#define CAP_IS_QOS(x)                    (((x) & 0x0200) != 0)	// 802.11e d9
+#define CAP_IS_SPECTRUM_MGMT(x)          (((x) & 0x0100) != 0)	/* 802.11e d9 */
+#define CAP_IS_QOS(x)                    (((x) & 0x0200) != 0)	/* 802.11e d9 */
 #define CAP_IS_SHORT_SLOT(x)             (((x) & 0x0400) != 0)
-#define CAP_IS_APSD(x)                   (((x) & 0x0800) != 0)	// 802.11e d9
-#define CAP_IS_IMMED_BA(x)               (((x) & 0x1000) != 0)	// 802.11e d9
+#define CAP_IS_APSD(x)                   (((x) & 0x0800) != 0)	/* 802.11e d9 */
+#define CAP_IS_IMMED_BA(x)               (((x) & 0x1000) != 0)	/* 802.11e d9 */
 #define CAP_IS_DSSS_OFDM(x)              (((x) & 0x2000) != 0)
-#define CAP_IS_DELAY_BA(x)               (((x) & 0x4000) != 0)	// 802.11e d9
+#define CAP_IS_DELAY_BA(x)               (((x) & 0x4000) != 0)	/* 802.11e d9 */
 
 #define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum)  (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
 
-#define ERP_IS_NON_ERP_PRESENT(x)        (((x) & 0x01) != 0)	// 802.11g
-#define ERP_IS_USE_PROTECTION(x)         (((x) & 0x02) != 0)	// 802.11g
-#define ERP_IS_USE_BARKER_PREAMBLE(x)    (((x) & 0x04) != 0)	// 802.11g
+#define ERP_IS_NON_ERP_PRESENT(x)        (((x) & 0x01) != 0)	/* 802.11g */
+#define ERP_IS_USE_PROTECTION(x)         (((x) & 0x02) != 0)	/* 802.11g */
+#define ERP_IS_USE_BARKER_PREAMBLE(x)    (((x) & 0x04) != 0)	/* 802.11g */
 
-#define DRS_TX_QUALITY_WORST_BOUND       8	// 3  // just test by gary
+#define DRS_TX_QUALITY_WORST_BOUND       8	/* 3  // just test by gary */
 #define DRS_PENALTY                      8
 
 #define BA_NOTUSE 	2
-//BA Policy subfiled value in ADDBA frame
+/*BA Policy subfiled value in ADDBA frame */
 #define IMMED_BA 	1
 #define DELAY_BA	0
 
-// BA Initiator subfield in DELBA frame
+/* BA Initiator subfield in DELBA frame */
 #define ORIGINATOR	1
 #define RECIPIENT	0
 
-// ADDBA Status Code
+/* ADDBA Status Code */
 #define ADDBA_RESULTCODE_SUCCESS					0
 #define ADDBA_RESULTCODE_REFUSED					37
 #define ADDBA_RESULTCODE_INVALID_PARAMETERS			38
 
-// DELBA Reason Code
+/* DELBA Reason Code */
 #define DELBA_REASONCODE_QSTA_LEAVING				36
 #define DELBA_REASONCODE_END_BA						37
 #define DELBA_REASONCODE_UNKNOWN_BA					38
 #define DELBA_REASONCODE_TIMEOUT					39
 
-// reset all OneSecTx counters
+/* reset all OneSecTx counters */
 #define RESET_ONE_SEC_TX_CNT(__pEntry) \
 if (((__pEntry)) != NULL) \
 { \
@@ -183,38 +183,38 @@
 	(__pEntry)->OneSecTxNoRetryOkCount = 0; \
 }
 
-//
-// 802.11 frame formats
-//
-//  HT Capability INFO field in HT Cap IE .
+/* */
+/* 802.11 frame formats */
+/* */
+/*  HT Capability INFO field in HT Cap IE . */
 typedef struct PACKED {
 	USHORT AdvCoding:1;
 	USHORT ChannelWidth:1;
-	USHORT MimoPs:2;	//momi power safe
-	USHORT GF:1;		//green field
+	USHORT MimoPs:2;	/*momi power safe */
+	USHORT GF:1;		/*green field */
 	USHORT ShortGIfor20:1;
-	USHORT ShortGIfor40:1;	//for40MHz
+	USHORT ShortGIfor40:1;	/*for40MHz */
 	USHORT TxSTBC:1;
 	USHORT RxSTBC:2;
-	USHORT DelayedBA:1;	//rt2860c not support
-	USHORT AMsduSize:1;	// only support as zero
+	USHORT DelayedBA:1;	/*rt2860c not support */
+	USHORT AMsduSize:1;	/* only support as zero */
 	USHORT CCKmodein40:1;
 	USHORT PSMP:1;
 	USHORT Forty_Mhz_Intolerant:1;
 	USHORT LSIGTxopProSup:1;
 } HT_CAP_INFO, *PHT_CAP_INFO;
 
-//  HT Capability INFO field in HT Cap IE .
+/*  HT Capability INFO field in HT Cap IE . */
 typedef struct PACKED {
 	UCHAR MaxRAmpduFactor:2;
 	UCHAR MpduDensity:3;
-	UCHAR rsv:3;		//momi power safe
+	UCHAR rsv:3;		/*momi power safe */
 } HT_CAP_PARM, *PHT_CAP_PARM;
 
-//  HT Capability INFO field in HT Cap IE .
+/*  HT Capability INFO field in HT Cap IE . */
 typedef struct PACKED {
 	UCHAR MCSSet[10];
-	UCHAR SupRate[2];	// unit : 1Mbps
+	UCHAR SupRate[2];	/* unit : 1Mbps */
 	UCHAR TxMCSSetDefined:1;
 	UCHAR TxRxNotEqual:1;
 	UCHAR TxStream:2;
@@ -223,18 +223,18 @@
 	UCHAR rsv3[3];
 } HT_MCS_SET, *PHT_MCS_SET;
 
-//  HT Capability INFO field in HT Cap IE .
+/*  HT Capability INFO field in HT Cap IE . */
 typedef struct PACKED {
 	USHORT Pco:1;
 	USHORT TranTime:2;
-	USHORT rsv:5;		//momi power safe
-	USHORT MCSFeedback:2;	//0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv.
-	USHORT PlusHTC:1;	//+HTC control field support
-	USHORT RDGSupport:1;	//reverse Direction Grant  support
+	USHORT rsv:5;		/*momi power safe */
+	USHORT MCSFeedback:2;	/*0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback,  1:rsv. */
+	USHORT PlusHTC:1;	/*+HTC control field support */
+	USHORT RDGSupport:1;	/*reverse Direction Grant  support */
 	USHORT rsv2:4;
 } EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
 
-//  HT Beamforming field in HT Cap IE .
+/*  HT Beamforming field in HT Cap IE . */
 typedef struct PACKED _HT_BF_CAP {
 	ULONG TxBFRecCapable:1;
 	ULONG RxSoundCapable:1;
@@ -258,7 +258,7 @@
 	ULONG rsv:3;
 } HT_BF_CAP, *PHT_BF_CAP;
 
-//  HT antenna selection field in HT Cap IE .
+/*  HT antenna selection field in HT Cap IE . */
 typedef struct PACKED _HT_AS_CAP {
 	UCHAR AntSelect:1;
 	UCHAR ExpCSIFbkTxASEL:1;
@@ -270,48 +270,48 @@
 	UCHAR rsv:1;
 } HT_AS_CAP, *PHT_AS_CAP;
 
-// Draft 1.0 set IE length 26, but is extensible..
+/* Draft 1.0 set IE length 26, but is extensible.. */
 #define SIZE_HT_CAP_IE		26
-// The structure for HT Capability IE.
+/* The structure for HT Capability IE. */
 typedef struct PACKED _HT_CAPABILITY_IE {
 	HT_CAP_INFO HtCapInfo;
 	HT_CAP_PARM HtCapParm;
-//      HT_MCS_SET              HtMCSSet;
+/*      HT_MCS_SET              HtMCSSet; */
 	UCHAR MCSSet[16];
 	EXT_HT_CAP_INFO ExtHtCapInfo;
-	HT_BF_CAP TxBFCap;	// beamforming cap. rt2860c not support beamforming.
-	HT_AS_CAP ASCap;	//antenna selection.
+	HT_BF_CAP TxBFCap;	/* beamforming cap. rt2860c not support beamforming. */
+	HT_AS_CAP ASCap;	/*antenna selection. */
 } HT_CAPABILITY_IE, *PHT_CAPABILITY_IE;
 
-// 802.11n draft3 related structure definitions.
-// 7.3.2.60
-#define dot11OBSSScanPassiveDwell							20	// in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan.
-#define dot11OBSSScanActiveDwell							10	// in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan.
-#define dot11BSSWidthTriggerScanInterval					300	// in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
-#define dot11OBSSScanPassiveTotalPerChannel					200	// in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
-#define dot11OBSSScanActiveTotalPerChannel					20	//in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor			5	// min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum
-																//      interval between overlapping BSS scan operations.
-#define dot11BSSScanActivityThreshold						25	// in %%, max total time that a STA may be active on the medium during a period of
-																//      (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
-																//      being obligated to perform OBSS Scan operations. default is 25(== 0.25%)
+/* 802.11n draft3 related structure definitions. */
+/* 7.3.2.60 */
+#define dot11OBSSScanPassiveDwell							20	/* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */
+#define dot11OBSSScanActiveDwell							10	/* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */
+#define dot11BSSWidthTriggerScanInterval					300	/* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */
+#define dot11OBSSScanPassiveTotalPerChannel					200	/* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */
+#define dot11OBSSScanActiveTotalPerChannel					20	/*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */
+#define dot11BSSWidthChannelTransactionDelayFactor			5	/* min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum */
+																/*      interval between overlapping BSS scan operations. */
+#define dot11BSSScanActivityThreshold						25	/* in %%, max total time that a STA may be active on the medium during a period of */
+																/*      (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without */
+																/*      being obligated to perform OBSS Scan operations. default is 25(== 0.25%) */
 
 typedef struct PACKED _OVERLAP_BSS_SCAN_IE {
 	USHORT ScanPassiveDwell;
 	USHORT ScanActiveDwell;
-	USHORT TriggerScanInt;	// Trigger scan interval
-	USHORT PassiveTalPerChannel;	// passive total per channel
-	USHORT ActiveTalPerChannel;	// active total per channel
-	USHORT DelayFactor;	// BSS width channel transition delay factor
-	USHORT ScanActThre;	// Scan Activity threshold
+	USHORT TriggerScanInt;	/* Trigger scan interval */
+	USHORT PassiveTalPerChannel;	/* passive total per channel */
+	USHORT ActiveTalPerChannel;	/* active total per channel */
+	USHORT DelayFactor;	/* BSS width channel transition delay factor */
+	USHORT ScanActThre;	/* Scan Activity threshold */
 } OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE;
 
-//  7.3.2.56. 20/40 Coexistence element used in  Element ID = 72 = IE_2040_BSS_COEXIST
+/*  7.3.2.56. 20/40 Coexistence element used in  Element ID = 72 = IE_2040_BSS_COEXIST */
 typedef union PACKED _BSS_2040_COEXIST_IE {
 	struct PACKED {
 		UCHAR InfoReq:1;
-		UCHAR Intolerant40:1;	// Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
-		UCHAR BSS20WidthReq:1;	// Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
+		UCHAR Intolerant40:1;	/* Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS. */
+		UCHAR BSS20WidthReq:1;	/* Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS. */
 		UCHAR rsv:5;
 	} field;
 	UCHAR word;
@@ -320,22 +320,22 @@
 typedef struct _TRIGGER_EVENTA {
 	BOOLEAN bValid;
 	UCHAR BSSID[6];
-	UCHAR RegClass;		// Regulatory Class
+	UCHAR RegClass;		/* Regulatory Class */
 	USHORT Channel;
-	ULONG CDCounter;	// Maintain a seperate count down counter for each Event A.
+	ULONG CDCounter;	/* Maintain a seperate count down counter for each Event A. */
 } TRIGGER_EVENTA, *PTRIGGER_EVENTA;
 
-// 20/40 trigger event table
-// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP.
+/* 20/40 trigger event table */
+/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */
 #define MAX_TRIGGER_EVENT		64
 typedef struct _TRIGGER_EVENT_TAB {
 	UCHAR EventANo;
 	TRIGGER_EVENTA EventA[MAX_TRIGGER_EVENT];
-	ULONG EventBCountDown;	// Count down counter for Event B.
+	ULONG EventBCountDown;	/* Count down counter for Event B. */
 } TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB;
 
-// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
-//      This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
+/* 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY). */
+/*      This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0 */
 typedef struct PACKED _EXT_CAP_INFO_ELEMENT {
 	UCHAR BssCoexistMgmtSupport:1;
 	UCHAR rsv:1;
@@ -343,59 +343,59 @@
 	UCHAR rsv2:5;
 } EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
 
-// 802.11n 7.3.2.61
+/* 802.11n 7.3.2.61 */
 typedef struct PACKED _BSS_2040_COEXIST_ELEMENT {
-	UCHAR ElementID;	// ID = IE_2040_BSS_COEXIST = 72
+	UCHAR ElementID;	/* ID = IE_2040_BSS_COEXIST = 72 */
 	UCHAR Len;
 	BSS_2040_COEXIST_IE BssCoexistIe;
 } BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT;
 
-//802.11n 7.3.2.59
+/*802.11n 7.3.2.59 */
 typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT {
-	UCHAR ElementID;	// ID = IE_2040_BSS_INTOLERANT_REPORT = 73
+	UCHAR ElementID;	/* ID = IE_2040_BSS_INTOLERANT_REPORT = 73 */
 	UCHAR Len;
 	UCHAR RegulatoryClass;
 	UCHAR ChList[0];
 } BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT;
 
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
+/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
 typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE {
-	UCHAR SwitchMode;	//channel switch mode
-	UCHAR NewChannel;	//
-	UCHAR SwitchCount;	//
+	UCHAR SwitchMode;	/*channel switch mode */
+	UCHAR NewChannel;	/* */
+	UCHAR SwitchCount;	/* */
 } CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE;
 
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
+/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */
 typedef struct PACKED _SEC_CHA_OFFSET_IE {
-	UCHAR SecondaryChannelOffset;	// 1: Secondary above, 3: Secondary below, 0: no Secondary
+	UCHAR SecondaryChannelOffset;	/* 1: Secondary above, 3: Secondary below, 0: no Secondary */
 } SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE;
 
-// This structure is extracted from struct RT_HT_CAPABILITY
+/* This structure is extracted from struct RT_HT_CAPABILITY */
 typedef struct {
-	BOOLEAN bHtEnable;	// If we should use ht rate.
-	BOOLEAN bPreNHt;	// If we should use ht rate.
-	//Substract from HT Capability IE
+	BOOLEAN bHtEnable;	/* If we should use ht rate. */
+	BOOLEAN bPreNHt;	/* If we should use ht rate. */
+	/*Substract from HT Capability IE */
 	UCHAR MCSSet[16];
 } RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
 
-//This structure substracts ralink supports from all 802.11n-related features.
-//Features not listed here but contained in 802.11n spec are not supported in rt2860.
+/*This structure substracts ralink supports from all 802.11n-related features. */
+/*Features not listed here but contained in 802.11n spec are not supported in rt2860. */
 typedef struct {
 	USHORT ChannelWidth:1;
-	USHORT MimoPs:2;	//mimo power safe MMPS_
-	USHORT GF:1;		//green field
+	USHORT MimoPs:2;	/*mimo power safe MMPS_ */
+	USHORT GF:1;		/*green field */
 	USHORT ShortGIfor20:1;
-	USHORT ShortGIfor40:1;	//for40MHz
+	USHORT ShortGIfor40:1;	/*for40MHz */
 	USHORT TxSTBC:1;
-	USHORT RxSTBC:2;	// 2 bits
-	USHORT AmsduEnable:1;	// Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
-	USHORT AmsduSize:1;	// Max receiving A-MSDU size
+	USHORT RxSTBC:2;	/* 2 bits */
+	USHORT AmsduEnable:1;	/* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */
+	USHORT AmsduSize:1;	/* Max receiving A-MSDU size */
 	USHORT rsv:5;
 
-	//Substract from Addiont HT INFO IE
+	/*Substract from Addiont HT INFO IE */
 	UCHAR MaxRAmpduFactor:2;
 	UCHAR MpduDensity:3;
-	UCHAR ExtChanOffset:2;	// Please not the difference with following     UCHAR   NewExtChannelOffset; from 802.11n
+	UCHAR ExtChanOffset:2;	/* Please not the difference with following     UCHAR   NewExtChannelOffset; from 802.11n */
 	UCHAR RecomWidth:1;
 
 	USHORT OperaionMode:2;
@@ -404,19 +404,19 @@
 	USHORT OBSS_NonHTExist:1;
 	USHORT rsv2:11;
 
-	// New Extension Channel Offset IE
+	/* New Extension Channel Offset IE */
 	UCHAR NewExtChannelOffset;
-	// Extension Capability IE = 127
+	/* Extension Capability IE = 127 */
 	UCHAR BSSCoexist2040;
 } RT_HT_CAPABILITY, *PRT_HT_CAPABILITY;
 
-//   field in Addtional HT Information IE .
+/*   field in Addtional HT Information IE . */
 typedef struct PACKED {
 	UCHAR ExtChanOffset:2;
 	UCHAR RecomWidth:1;
 	UCHAR RifsMode:1;
-	UCHAR S_PSMPSup:1;	//Indicate support for scheduled PSMP
-	UCHAR SerInterGranu:3;	//service interval granularity
+	UCHAR S_PSMPSup:1;	/*Indicate support for scheduled PSMP */
+	UCHAR SerInterGranu:3;	/*service interval granularity */
 } ADD_HTINFO, *PADD_HTINFO;
 
 typedef struct PACKED {
@@ -427,13 +427,13 @@
 	USHORT rsv2:11;
 } ADD_HTINFO2, *PADD_HTINFO2;
 
-// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
+/* TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved. */
 typedef struct PACKED {
 	USHORT StbcMcs:6;
 	USHORT DualBeacon:1;
 	USHORT DualCTSProtect:1;
 	USHORT STBCBeacon:1;
-	USHORT LsigTxopProt:1;	// L-SIG TXOP protection full support
+	USHORT LsigTxopProt:1;	/* L-SIG TXOP protection full support */
 	USHORT PcoActive:1;
 	USHORT PcoPhase:1;
 	USHORT rsv:4;
@@ -445,7 +445,7 @@
 	ADD_HTINFO AddHtInfo;
 	ADD_HTINFO2 AddHtInfo2;
 	ADD_HTINFO3 AddHtInfo3;
-	UCHAR MCSSet[16];	// Basic MCS set
+	UCHAR MCSSet[16];	/* Basic MCS set */
 } ADD_HT_INFO_IE, *PADD_HT_INFO_IE;
 
 typedef struct PACKED {
@@ -457,7 +457,7 @@
 	UCHAR Octet[1];
 } FRAME_802_11, *PFRAME_802_11;
 
-// QoSNull embedding of management action. When HT Control MA field set to 1.
+/* QoSNull embedding of management action. When HT Control MA field set to 1. */
 typedef struct PACKED _MA_BODY {
 	UCHAR Category;
 	UCHAR Action;
@@ -469,51 +469,51 @@
 	UCHAR SAAddr2[MAC_ADDR_LEN];
 	UCHAR Octet[2];
 } HEADER_802_3, *PHEADER_802_3;
-////Block ACK related format
-// 2-byte BA Parameter  field  in       DELBA frames to terminate an already set up bA
+/*//Block ACK related format */
+/* 2-byte BA Parameter  field  in       DELBA frames to terminate an already set up bA */
 typedef struct PACKED {
-	USHORT Rsv:11;		// always set to 0
-	USHORT Initiator:1;	// 1: originator    0:recipient
-	USHORT TID:4;		// value of TC os TS
+	USHORT Rsv:11;		/* always set to 0 */
+	USHORT Initiator:1;	/* 1: originator    0:recipient */
+	USHORT TID:4;		/* value of TC os TS */
 } DELBA_PARM, *PDELBA_PARM;
 
-// 2-byte BA Parameter Set field  in ADDBA frames to signal parm for setting up a BA
+/* 2-byte BA Parameter Set field  in ADDBA frames to signal parm for setting up a BA */
 typedef struct PACKED {
-	USHORT AMSDUSupported:1;	// 0: not permitted             1: permitted
-	USHORT BAPolicy:1;	// 1: immediately BA    0:delayed BA
-	USHORT TID:4;		// value of TC os TS
-	USHORT BufSize:10;	// number of buffe of size 2304 octetsr
+	USHORT AMSDUSupported:1;	/* 0: not permitted             1: permitted */
+	USHORT BAPolicy:1;	/* 1: immediately BA    0:delayed BA */
+	USHORT TID:4;		/* value of TC os TS */
+	USHORT BufSize:10;	/* number of buffe of size 2304 octetsr */
 } BA_PARM, *PBA_PARM;
 
-// 2-byte BA Starting Seq CONTROL field
+/* 2-byte BA Starting Seq CONTROL field */
 typedef union PACKED {
 	struct PACKED {
-		USHORT FragNum:4;	// always set to 0
-		USHORT StartSeq:12;	// sequence number of the 1st MSDU for which this BAR is sent
+		USHORT FragNum:4;	/* always set to 0 */
+		USHORT StartSeq:12;	/* sequence number of the 1st MSDU for which this BAR is sent */
 	} field;
 	USHORT word;
 } BASEQ_CONTROL, *PBASEQ_CONTROL;
 
-//BAControl and BARControl are the same
-// 2-byte BA CONTROL field in BA frame
+/*BAControl and BARControl are the same */
+/* 2-byte BA CONTROL field in BA frame */
 typedef struct PACKED {
-	USHORT ACKPolicy:1;	// only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK
-	USHORT MTID:1;		//EWC V1.24
+	USHORT ACKPolicy:1;	/* only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK  1:No ACK */
+	USHORT MTID:1;		/*EWC V1.24 */
 	USHORT Compressed:1;
 	USHORT Rsv:9;
 	USHORT TID:4;
 } BA_CONTROL, *PBA_CONTROL;
 
-// 2-byte BAR CONTROL field in BAR frame
+/* 2-byte BAR CONTROL field in BAR frame */
 typedef struct PACKED {
-	USHORT ACKPolicy:1;	// 0:normal ack,  1:no ack.
-	USHORT MTID:1;		//if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ
+	USHORT ACKPolicy:1;	/* 0:normal ack,  1:no ack. */
+	USHORT MTID:1;		/*if this bit1, use  FRAME_MTBA_REQ,  if 0, use FRAME_BA_REQ */
 	USHORT Compressed:1;
 	USHORT Rsv1:9;
 	USHORT TID:4;
 } BAR_CONTROL, *PBAR_CONTROL;
 
-// BARControl in MTBAR frame
+/* BARControl in MTBAR frame */
 typedef struct PACKED {
 	USHORT ACKPolicy:1;
 	USHORT MTID:1;
@@ -532,7 +532,7 @@
 	BASEQ_CONTROL BAStartingSeq;
 } EACH_TID, *PEACH_TID;
 
-// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
+/* BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap. */
 typedef struct PACKED _FRAME_BA_REQ {
 	FRAME_CONTROL FC;
 	USHORT Duration;
@@ -552,7 +552,7 @@
 	BASEQ_CONTROL BAStartingSeq;
 } FRAME_MTBA_REQ, *PFRAME_MTBA_REQ;
 
-// Compressed format is mandantory in HT STA
+/* Compressed format is mandantory in HT STA */
 typedef struct PACKED _FRAME_MTBA {
 	FRAME_CONTROL FC;
 	USHORT Duration;
@@ -567,7 +567,7 @@
 	HEADER_802_11 Hdr;
 	UCHAR Category;
 	UCHAR Action;
-	UCHAR Psmp;		// 7.3.1.25
+	UCHAR Psmp;		/* 7.3.1.25 */
 } FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION;
 
 typedef struct PACKED _FRAME_ACTION_HDR {
@@ -576,17 +576,17 @@
 	UCHAR Action;
 } FRAME_ACTION_HDR, *PFRAME_ACTION_HDR;
 
-//Action Frame
-//Action Frame  Category:Spectrum,  Action:Channel Switch. 7.3.2.20
+/*Action Frame */
+/*Action Frame  Category:Spectrum,  Action:Channel Switch. 7.3.2.20 */
 typedef struct PACKED _CHAN_SWITCH_ANNOUNCE {
-	UCHAR ElementID;	// ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37
+	UCHAR ElementID;	/* ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37 */
 	UCHAR Len;
 	CHA_SWITCH_ANNOUNCE_IE CSAnnounceIe;
 } CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE;
 
-//802.11n : 7.3.2.20a
+/*802.11n : 7.3.2.20a */
 typedef struct PACKED _SECOND_CHAN_OFFSET {
-	UCHAR ElementID;	// ID = IE_SECONDARY_CH_OFFSET = 62
+	UCHAR ElementID;	/* ID = IE_SECONDARY_CH_OFFSET = 62 */
 	UCHAR Len;
 	SEC_CHA_OFFSET_IE SecChOffsetIe;
 } SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET;
@@ -603,10 +603,10 @@
 	HEADER_802_11 Hdr;
 	UCHAR Category;
 	UCHAR Action;
-	UCHAR Token;		// 1
-	BA_PARM BaParm;		//  2 - 10
-	USHORT TimeOutValue;	// 0 - 0
-	BASEQ_CONTROL BaStartSeq;	// 0-0
+	UCHAR Token;		/* 1 */
+	BA_PARM BaParm;		/*  2 - 10 */
+	USHORT TimeOutValue;	/* 0 - 0 */
+	BASEQ_CONTROL BaStartSeq;	/* 0-0 */
 } FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ;
 
 typedef struct PACKED _FRAME_ADDBA_RSP {
@@ -615,7 +615,7 @@
 	UCHAR Action;
 	UCHAR Token;
 	USHORT StatusCode;
-	BA_PARM BaParm;		//0 - 2
+	BA_PARM BaParm;		/*0 - 2 */
 	USHORT TimeOutValue;
 } FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP;
 
@@ -627,7 +627,7 @@
 	USHORT ReasonCode;
 } FRAME_DELBA_REQ, *PFRAME_DELBA_REQ;
 
-//7.2.1.7
+/*7.2.1.7 */
 typedef struct PACKED _FRAME_BAR {
 	FRAME_CONTROL FC;
 	USHORT Duration;
@@ -637,7 +637,7 @@
 	BASEQ_CONTROL StartingSeq;
 } FRAME_BAR, *PFRAME_BAR;
 
-//7.2.1.7
+/*7.2.1.7 */
 typedef struct PACKED _FRAME_BA {
 	FRAME_CONTROL FC;
 	USHORT Duration;
@@ -648,7 +648,7 @@
 	UCHAR bitmask[8];
 } FRAME_BA, *PFRAME_BA;
 
-// Radio Measuement Request Frame Format
+/* Radio Measuement Request Frame Format */
 typedef struct PACKED _FRAME_RM_REQ_ACTION {
 	HEADER_802_11 Hdr;
 	UCHAR Category;
@@ -668,21 +668,21 @@
 } HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE,
     *PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE;
 
-//
-// _Limit must be the 2**n - 1
-// _SEQ1 , _SEQ2 must be within 0 ~ _Limit
-//
+/* */
+/* _Limit must be the 2**n - 1 */
+/* _SEQ1 , _SEQ2 must be within 0 ~ _Limit */
+/* */
 #define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit)	((_SEQ1 == ((_SEQ2+1) & _Limit)))
 #define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit)	(((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))
 #define SEQ_LARGER(_SEQ1, _SEQ2, _Limit)	((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1))))
 #define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) &&  \
 												SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit))
 
-//
-// Contention-free parameter (without ID and Length)
-//
+/* */
+/* Contention-free parameter (without ID and Length) */
+/* */
 typedef struct PACKED {
-	BOOLEAN bValid;		// 1: variable contains valid value
+	BOOLEAN bValid;		/* 1: variable contains valid value */
 	UCHAR CfpCount;
 	UCHAR CfpPeriod;
 	USHORT CfpMaxDuration;
@@ -690,39 +690,39 @@
 } CF_PARM, *PCF_PARM;
 
 typedef struct _CIPHER_SUITE {
-	NDIS_802_11_ENCRYPTION_STATUS PairCipher;	// Unicast cipher 1, this one has more secured cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS PairCipherAux;	// Unicast cipher 2 if AP announce two unicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS GroupCipher;	// Group cipher
-	USHORT RsnCapability;	// RSN capability from beacon
-	BOOLEAN bMixMode;	// Indicate Pair & Group cipher might be different
+	NDIS_802_11_ENCRYPTION_STATUS PairCipher;	/* Unicast cipher 1, this one has more secured cipher suite */
+	NDIS_802_11_ENCRYPTION_STATUS PairCipherAux;	/* Unicast cipher 2 if AP announce two unicast cipher suite */
+	NDIS_802_11_ENCRYPTION_STATUS GroupCipher;	/* Group cipher */
+	USHORT RsnCapability;	/* RSN capability from beacon */
+	BOOLEAN bMixMode;	/* Indicate Pair & Group cipher might be different */
 } CIPHER_SUITE, *PCIPHER_SUITE;
 
-// EDCA configuration from AP's BEACON/ProbeRsp
+/* EDCA configuration from AP's BEACON/ProbeRsp */
 typedef struct {
-	BOOLEAN bValid;		// 1: variable contains valid value
-	BOOLEAN bAdd;		// 1: variable contains valid value
+	BOOLEAN bValid;		/* 1: variable contains valid value */
+	BOOLEAN bAdd;		/* 1: variable contains valid value */
 	BOOLEAN bQAck;
 	BOOLEAN bQueueRequest;
 	BOOLEAN bTxopRequest;
 	BOOLEAN bAPSDCapable;
-//  BOOLEAN     bMoreDataAck;
+/*  BOOLEAN     bMoreDataAck; */
 	UCHAR EdcaUpdateCount;
-	UCHAR Aifsn[4];		// 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO
+	UCHAR Aifsn[4];		/* 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO */
 	UCHAR Cwmin[4];
 	UCHAR Cwmax[4];
-	USHORT Txop[4];		// in unit of 32-us
-	BOOLEAN bACM[4];	// 1: Admission Control of AC_BK is mandattory
+	USHORT Txop[4];		/* in unit of 32-us */
+	BOOLEAN bACM[4];	/* 1: Admission Control of AC_BK is mandattory */
 } EDCA_PARM, *PEDCA_PARM;
 
-// QBSS LOAD information from QAP's BEACON/ProbeRsp
+/* QBSS LOAD information from QAP's BEACON/ProbeRsp */
 typedef struct {
-	BOOLEAN bValid;		// 1: variable contains valid value
+	BOOLEAN bValid;		/* 1: variable contains valid value */
 	USHORT StaNum;
 	UCHAR ChannelUtilization;
-	USHORT RemainingAdmissionControl;	// in unit of 32-us
+	USHORT RemainingAdmissionControl;	/* in unit of 32-us */
 } QBSS_LOAD_PARM, *PQBSS_LOAD_PARM;
 
-// QBSS Info field in QSTA's assoc req
+/* QBSS Info field in QSTA's assoc req */
 typedef struct PACKED {
 	UCHAR UAPSD_AC_VO:1;
 	UCHAR UAPSD_AC_VI:1;
@@ -733,21 +733,21 @@
 	UCHAR Rsv2:1;
 } QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
 
-// QBSS Info field in QAP's Beacon/ProbeRsp
+/* QBSS Info field in QAP's Beacon/ProbeRsp */
 typedef struct PACKED {
 	UCHAR ParamSetCount:4;
 	UCHAR Rsv:3;
 	UCHAR UAPSD:1;
 } QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
 
-// QOS Capability reported in QAP's BEACON/ProbeRsp
-// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq
+/* QOS Capability reported in QAP's BEACON/ProbeRsp */
+/* QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq */
 typedef struct {
-	BOOLEAN bValid;		// 1: variable contains valid value
+	BOOLEAN bValid;		/* 1: variable contains valid value */
 	BOOLEAN bQAck;
 	BOOLEAN bQueueRequest;
 	BOOLEAN bTxopRequest;
-//  BOOLEAN     bMoreDataAck;
+/*  BOOLEAN     bMoreDataAck; */
 	UCHAR EdcaUpdateCount;
 } QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
 
@@ -759,7 +759,7 @@
 typedef struct {
 	UCHAR Bssid[MAC_ADDR_LEN];
 	UCHAR Channel;
-	UCHAR CentralChannel;	//Store the wide-band central channel for 40MHz.  .used in 40MHz AP. Or this is the same as Channel.
+	UCHAR CentralChannel;	/*Store the wide-band central channel for 40MHz.  .used in 40MHz AP. Or this is the same as Channel. */
 	UCHAR BssType;
 	USHORT AtimWin;
 	USHORT BeaconPeriod;
@@ -770,11 +770,11 @@
 	UCHAR ExtRateLen;
 	HT_CAPABILITY_IE HtCapability;
 	UCHAR HtCapabilityLen;
-	ADD_HT_INFO_IE AddHtInfo;	// AP might use this additional ht info IE
+	ADD_HT_INFO_IE AddHtInfo;	/* AP might use this additional ht info IE */
 	UCHAR AddHtInfoLen;
 	UCHAR NewExtChanOffset;
 	CHAR Rssi;
-	UCHAR Privacy;		// Indicate security function ON/OFF. Don't mess up with auth mode.
+	UCHAR Privacy;		/* Indicate security function ON/OFF. Don't mess up with auth mode. */
 	UCHAR Hidden;
 
 	USHORT DtimPeriod;
@@ -787,30 +787,30 @@
 	UCHAR SsidLen;
 	CHAR Ssid[MAX_LEN_OF_SSID];
 
-	ULONG LastBeaconRxTime;	// OS's timestamp
+	ULONG LastBeaconRxTime;	/* OS's timestamp */
 
 	BOOLEAN bSES;
 
-	// New for WPA2
-	CIPHER_SUITE WPA;	// AP announced WPA cipher suite
-	CIPHER_SUITE WPA2;	// AP announced WPA2 cipher suite
+	/* New for WPA2 */
+	CIPHER_SUITE WPA;	/* AP announced WPA cipher suite */
+	CIPHER_SUITE WPA2;	/* AP announced WPA2 cipher suite */
 
-	// New for microsoft WPA support
+	/* New for microsoft WPA support */
 	NDIS_802_11_FIXED_IEs FixIEs;
-	NDIS_802_11_AUTHENTICATION_MODE AuthModeAux;	// Addition mode for WPA2 / WPA capable AP
+	NDIS_802_11_AUTHENTICATION_MODE AuthModeAux;	/* Addition mode for WPA2 / WPA capable AP */
 	NDIS_802_11_AUTHENTICATION_MODE AuthMode;
-	NDIS_802_11_WEP_STATUS WepStatus;	// Unicast Encryption Algorithm extract from VAR_IE
-	USHORT VarIELen;	// Length of next VIE include EID & Length
+	NDIS_802_11_WEP_STATUS WepStatus;	/* Unicast Encryption Algorithm extract from VAR_IE */
+	USHORT VarIELen;	/* Length of next VIE include EID & Length */
 	UCHAR VarIEs[MAX_VIE_LEN];
 
-	// CCX Ckip information
+	/* CCX Ckip information */
 	UCHAR CkipFlag;
 
-	// CCX 2 TSF
-	UCHAR PTSF[4];		// Parent TSF
-	UCHAR TTSF[8];		// Target TSF
+	/* CCX 2 TSF */
+	UCHAR PTSF[4];		/* Parent TSF */
+	UCHAR TTSF[8];		/* Target TSF */
 
-	// 802.11e d9, and WMM
+	/* 802.11e d9, and WMM */
 	EDCA_PARM EdcaParm;
 	QOS_CAPABILITY_PARM QosCapability;
 	QBSS_LOAD_PARM QbssLoad;
@@ -857,12 +857,12 @@
 	STATE_MACHINE_FUNC *TransFunc;
 } STATE_MACHINE, *PSTATE_MACHINE;
 
-// MLME AUX data structure that hold temporarliy settings during a connection attempt.
-// Once this attemp succeeds, all settings will be copy to pAd->StaActive.
-// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of
-// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely
-// separate this under-trial settings away from pAd->StaActive so that once
-// this new attempt failed, driver can auto-recover back to the active settings.
+/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */
+/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */
+/* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */
+/* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */
+/* separate this under-trial settings away from pAd->StaActive so that once */
+/* this new attempt failed, driver can auto-recover back to the active settings. */
 typedef struct _MLME_AUX {
 	UCHAR BssType;
 	UCHAR Ssid[MAX_LEN_OF_SSID];
@@ -881,28 +881,28 @@
 	USHORT CfpPeriod;
 	USHORT AtimWin;
 
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
+	/* Copy supported rate from desired AP's beacon. We are trying to match */
+	/* AP's supported and extended rate settings. */
 	UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR SupRateLen;
 	UCHAR ExtRateLen;
 	HT_CAPABILITY_IE HtCapability;
 	UCHAR HtCapabilityLen;
-	ADD_HT_INFO_IE AddHtInfo;	// AP might use this additional ht info IE
+	ADD_HT_INFO_IE AddHtInfo;	/* AP might use this additional ht info IE */
 	UCHAR NewExtChannelOffset;
-	//RT_HT_CAPABILITY      SupportedHtPhy;
+	/*RT_HT_CAPABILITY      SupportedHtPhy; */
 
-	// new for QOS
-	QOS_CAPABILITY_PARM APQosCapability;	// QOS capability of the current associated AP
-	EDCA_PARM APEdcaParm;	// EDCA parameters of the current associated AP
-	QBSS_LOAD_PARM APQbssLoad;	// QBSS load of the current associated AP
+	/* new for QOS */
+	QOS_CAPABILITY_PARM APQosCapability;	/* QOS capability of the current associated AP */
+	EDCA_PARM APEdcaParm;	/* EDCA parameters of the current associated AP */
+	QBSS_LOAD_PARM APQbssLoad;	/* QBSS load of the current associated AP */
 
-	// new to keep Ralink specific feature
+	/* new to keep Ralink specific feature */
 	ULONG APRalinkIe;
 
-	BSS_TABLE SsidBssTab;	// AP list for the same SSID
-	BSS_TABLE RoamTab;	// AP list eligible for roaming
+	BSS_TABLE SsidBssTab;	/* AP list for the same SSID */
+	BSS_TABLE RoamTab;	/* AP list eligible for roaming */
 	ULONG BssIdx;
 	ULONG RoamIdx;
 
@@ -914,7 +914,7 @@
 } MLME_AUX, *PMLME_AUX;
 
 typedef struct _MLME_ADDBA_REQ_STRUCT {
-	UCHAR Wcid;		//
+	UCHAR Wcid;		/* */
 	UCHAR pAddr[MAC_ADDR_LEN];
 	UCHAR BaBufSize;
 	USHORT TimeOutValue;
@@ -924,13 +924,13 @@
 } MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT;
 
 typedef struct _MLME_DELBA_REQ_STRUCT {
-	UCHAR Wcid;		//
+	UCHAR Wcid;		/* */
 	UCHAR Addr[MAC_ADDR_LEN];
 	UCHAR TID;
 	UCHAR Initiator;
 } MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT;
 
-// assoc struct is equal to reassoc
+/* assoc struct is equal to reassoc */
 typedef struct _MLME_ASSOC_REQ_STRUCT {
 	UCHAR Addr[MAC_ADDR_LEN];
 	USHORT CapabilityInfo;
@@ -991,62 +991,62 @@
 	UCHAR TrainDown;
 } RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH;
 
-// ========================== AP mlme.h ===============================
-#define TBTT_PRELOAD_TIME       384	// usec. LomgPreamble + 24-byte at 1Mbps
+/* ========================== AP mlme.h =============================== */
+#define TBTT_PRELOAD_TIME       384	/* usec. LomgPreamble + 24-byte at 1Mbps */
 #define DEFAULT_DTIM_PERIOD     1
 
-#define MAC_TABLE_AGEOUT_TIME			300	// unit: sec
-#define MAC_TABLE_ASSOC_TIMEOUT			5	// unit: sec
+#define MAC_TABLE_AGEOUT_TIME			300	/* unit: sec */
+#define MAC_TABLE_ASSOC_TIMEOUT			5	/* unit: sec */
 #define MAC_TABLE_FULL(Tab)				((Tab).size == MAX_LEN_OF_MAC_TABLE)
 
-// AP shall drop the sta if contine Tx fail count reach it.
-#define MAC_ENTRY_LIFE_CHECK_CNT		20	// packet cnt.
+/* AP shall drop the sta if contine Tx fail count reach it. */
+#define MAC_ENTRY_LIFE_CHECK_CNT		20	/* packet cnt. */
 
-// Value domain of pMacEntry->Sst
+/* Value domain of pMacEntry->Sst */
 typedef enum _Sst {
-	SST_NOT_AUTH,		// 0: equivalent to IEEE 802.11/1999 state 1
-	SST_AUTH,		// 1: equivalent to IEEE 802.11/1999 state 2
-	SST_ASSOC		// 2: equivalent to IEEE 802.11/1999 state 3
+	SST_NOT_AUTH,		/* 0: equivalent to IEEE 802.11/1999 state 1 */
+	SST_AUTH,		/* 1: equivalent to IEEE 802.11/1999 state 2 */
+	SST_ASSOC		/* 2: equivalent to IEEE 802.11/1999 state 3 */
 } SST;
 
-// value domain of pMacEntry->AuthState
+/* value domain of pMacEntry->AuthState */
 typedef enum _AuthState {
 	AS_NOT_AUTH,
-	AS_AUTH_OPEN,		// STA has been authenticated using OPEN SYSTEM
-	AS_AUTH_KEY,		// STA has been authenticated using SHARED KEY
-	AS_AUTHENTICATING	// STA is waiting for AUTH seq#3 using SHARED KEY
+	AS_AUTH_OPEN,		/* STA has been authenticated using OPEN SYSTEM */
+	AS_AUTH_KEY,		/* STA has been authenticated using SHARED KEY */
+	AS_AUTHENTICATING	/* STA is waiting for AUTH seq#3 using SHARED KEY */
 } AUTH_STATE;
 
-//for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
+/*for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114 */
 typedef enum _ApWpaState {
-	AS_NOTUSE,		// 0
-	AS_DISCONNECT,		// 1
-	AS_DISCONNECTED,	// 2
-	AS_INITIALIZE,		// 3
-	AS_AUTHENTICATION,	// 4
-	AS_AUTHENTICATION2,	// 5
-	AS_INITPMK,		// 6
-	AS_INITPSK,		// 7
-	AS_PTKSTART,		// 8
-	AS_PTKINIT_NEGOTIATING,	// 9
-	AS_PTKINITDONE,		// 10
-	AS_UPDATEKEYS,		// 11
-	AS_INTEGRITY_FAILURE,	// 12
-	AS_KEYUPDATE,		// 13
+	AS_NOTUSE,		/* 0 */
+	AS_DISCONNECT,		/* 1 */
+	AS_DISCONNECTED,	/* 2 */
+	AS_INITIALIZE,		/* 3 */
+	AS_AUTHENTICATION,	/* 4 */
+	AS_AUTHENTICATION2,	/* 5 */
+	AS_INITPMK,		/* 6 */
+	AS_INITPSK,		/* 7 */
+	AS_PTKSTART,		/* 8 */
+	AS_PTKINIT_NEGOTIATING,	/* 9 */
+	AS_PTKINITDONE,		/* 10 */
+	AS_UPDATEKEYS,		/* 11 */
+	AS_INTEGRITY_FAILURE,	/* 12 */
+	AS_KEYUPDATE,		/* 13 */
 } AP_WPA_STATE;
 
-// for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114
+/* for-wpa value domain of pMacEntry->WpaState  802.1i D3   p.114 */
 typedef enum _GTKState {
 	REKEY_NEGOTIATING,
 	REKEY_ESTABLISHED,
 	KEYERROR,
 } GTK_STATE;
 
-//  for-wpa  value domain of pMacEntry->WpaState  802.1i D3   p.114
+/*  for-wpa  value domain of pMacEntry->WpaState  802.1i D3   p.114 */
 typedef enum _WpaGTKState {
 	SETKEYS,
 	SETKEYS_DONE,
 } WPA_GTK_STATE;
-// ====================== end of AP mlme.h ============================
+/* ====================== end of AP mlme.h ============================ */
 
-#endif // MLME_H__
+#endif /* MLME_H__ */
diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h
index 54fac1c..ba72141 100644
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -37,7 +37,7 @@
 #ifndef _OID_H_
 #define _OID_H_
 
-//#include <linux/wireless.h>
+/*#include <linux/wireless.h> */
 
 #ifndef TRUE
 #define TRUE				1
@@ -45,9 +45,9 @@
 #ifndef FALSE
 #define FALSE				0
 #endif
-//
-// IEEE 802.11 Structures and definitions
-//
+/* */
+/* IEEE 802.11 Structures and definitions */
+/* */
 #define MAX_TX_POWER_LEVEL              100	/* mW */
 #define MAX_RSSI_TRIGGER                -10	/* dBm */
 #define MIN_RSSI_TRIGGER                -200	/* dBm */
@@ -55,19 +55,19 @@
 #define MIN_FRAG_THRESHOLD              256	/* byte count */
 #define MAX_RTS_THRESHOLD               2347	/* byte count */
 
-// new types for Media Specific Indications
-// Extension channel offset
+/* new types for Media Specific Indications */
+/* Extension channel offset */
 #define EXTCHA_NONE			0
 #define EXTCHA_ABOVE		0x1
 #define EXTCHA_BELOW		0x3
 
-// BW
+/* BW */
 #define BAND_WIDTH_20		0
 #define BAND_WIDTH_40		1
 #define BAND_WIDTH_BOTH		2
-#define BAND_WIDTH_10		3	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-// SHORTGI
-#define GAP_INTERVAL_400	1	// only support in HT mode
+#define BAND_WIDTH_10		3	/* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */
+/* SHORTGI */
+#define GAP_INTERVAL_400	1	/* only support in HT mode */
 #define GAP_INTERVAL_800	0
 #define GAP_INTERVAL_BOTH	2
 
@@ -78,12 +78,12 @@
 #define NDIS_802_11_LENGTH_RATES        8
 #define NDIS_802_11_LENGTH_RATES_EX     16
 #define MAC_ADDR_LENGTH                 6
-//#define MAX_NUM_OF_CHS                                        49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUM_OF_CHS				54	// 14 channels @2.4G +  12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination
-#define MAX_NUMBER_OF_EVENT				10	// entry # in EVENT table
-#define MAX_NUMBER_OF_MAC				32	// if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+/*#define MAX_NUM_OF_CHS                                        49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc */
+#define MAX_NUM_OF_CHS				54	/* 14 channels @2.4G +  12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination */
+#define MAX_NUMBER_OF_EVENT				10	/* entry # in EVENT table */
+#define MAX_NUMBER_OF_MAC				32	/* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
 #define MAX_NUMBER_OF_ACL				64
-#define MAX_LENGTH_OF_SUPPORT_RATES		12	// 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+#define MAX_LENGTH_OF_SUPPORT_RATES		12	/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
 #define MAX_NUMBER_OF_DLS_ENTRY			4
 
 #define RT_QUERY_SIGNAL_CONTEXT				0x0402
@@ -91,9 +91,9 @@
 #define RT_SET_APD_PID						0x0405
 #define RT_SET_DEL_MAC_ENTRY				0x0406
 #define RT_QUERY_EVENT_TABLE			0x0407
-//
-// IEEE 802.11 OIDs
-//
+/* */
+/* IEEE 802.11 OIDs */
+/* */
 #define	OID_GET_SET_TOGGLE			0x8000
 #define	OID_GET_SET_FROM_UI			0x4000
 
@@ -119,7 +119,7 @@
 #define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
 #define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
 #define	RT_OID_802_11_QUERY_PIDVID					0x0615
-//for WPA_SUPPLICANT_SUPPORT
+/*for WPA_SUPPLICANT_SUPPORT */
 #define OID_SET_COUNTERMEASURES                     0x0616
 #define RT_OID_WPA_SUPPLICANT_SUPPORT               0x0621
 #define RT_OID_WE_VERSION_COMPILED                  0x0622
@@ -132,7 +132,7 @@
 	Ndis802_11StatusType_Authentication,
 	Ndis802_11StatusType_MediaStreamMode,
 	Ndis802_11StatusType_PMKID_CandidateList,
-	Ndis802_11StatusTypeMax	// not a real type, defined as an upper bound
+	Ndis802_11StatusTypeMax	/* not a real type, defined as an upper bound */
 } NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
 
 typedef UCHAR NDIS_802_11_MAC_ADDRESS[6];
@@ -141,7 +141,7 @@
 	NDIS_802_11_STATUS_TYPE StatusType;
 } NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
 
-// mask for authentication/integrity fields
+/* mask for authentication/integrity fields */
 #define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS        0x0f
 
 #define NDIS_802_11_AUTH_REQUEST_REAUTH             0x01
@@ -150,27 +150,27 @@
 #define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR        0x0E
 
 typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST {
-	ULONG Length;		// Length of structure
+	ULONG Length;		/* Length of structure */
 	NDIS_802_11_MAC_ADDRESS Bssid;
 	ULONG Flags;
 } NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
 
-//Added new types for PMKID Candidate lists.
+/*Added new types for PMKID Candidate lists. */
 typedef struct _PMKID_CANDIDATE {
 	NDIS_802_11_MAC_ADDRESS BSSID;
 	ULONG Flags;
 } PMKID_CANDIDATE, *PPMKID_CANDIDATE;
 
 typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST {
-	ULONG Version;		// Version of the structure
-	ULONG NumCandidates;	// No. of pmkid candidates
+	ULONG Version;		/* Version of the structure */
+	ULONG NumCandidates;	/* No. of pmkid candidates */
 	PMKID_CANDIDATE CandidateList[1];
 } NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
 
-//Flags for PMKID Candidate list structure
+/*Flags for PMKID Candidate list structure */
 #define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
 
-// Added new types for OFDM 5G and 2.4G
+/* Added new types for OFDM 5G and 2.4G */
 typedef enum _NDIS_802_11_NETWORK_TYPE {
 	Ndis802_11FH,
 	Ndis802_11DS,
@@ -179,11 +179,11 @@
 	Ndis802_11Automode,
 	Ndis802_11OFDM5_N,
 	Ndis802_11OFDM24_N,
-	Ndis802_11NetworkTypeMax	// not a real type, defined as an upper bound
+	Ndis802_11NetworkTypeMax	/* not a real type, defined as an upper bound */
 } NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
 
 typedef struct _NDIS_802_11_NETWORK_TYPE_LIST {
-	UINT NumberOfItems;	// in list below, at least 1
+	UINT NumberOfItems;	/* in list below, at least 1 */
 	NDIS_802_11_NETWORK_TYPE NetworkType[1];
 } NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
 
@@ -192,33 +192,33 @@
 	Ndis802_11PowerModeMAX_PSP,
 	Ndis802_11PowerModeFast_PSP,
 	Ndis802_11PowerModeLegacy_PSP,
-	Ndis802_11PowerModeMax	// not a real mode, defined as an upper bound
+	Ndis802_11PowerModeMax	/* not a real mode, defined as an upper bound */
 } NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
 
-typedef ULONG NDIS_802_11_TX_POWER_LEVEL;	// in milliwatts
+typedef ULONG NDIS_802_11_TX_POWER_LEVEL;	/* in milliwatts */
 
-//
-// Received Signal Strength Indication
-//
-typedef LONG NDIS_802_11_RSSI;	// in dBm
+/* */
+/* Received Signal Strength Indication */
+/* */
+typedef LONG NDIS_802_11_RSSI;	/* in dBm */
 
 typedef struct _NDIS_802_11_CONFIGURATION_FH {
-	ULONG Length;		// Length of structure
-	ULONG HopPattern;	// As defined by 802.11, MSB set
-	ULONG HopSet;		// to one if non-802.11
-	ULONG DwellTime;	// units are Kusec
+	ULONG Length;		/* Length of structure */
+	ULONG HopPattern;	/* As defined by 802.11, MSB set */
+	ULONG HopSet;		/* to one if non-802.11 */
+	ULONG DwellTime;	/* units are Kusec */
 } NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
 
 typedef struct _NDIS_802_11_CONFIGURATION {
-	ULONG Length;		// Length of structure
-	ULONG BeaconPeriod;	// units are Kusec
-	ULONG ATIMWindow;	// units are Kusec
-	ULONG DSConfig;		// Frequency, units are kHz
+	ULONG Length;		/* Length of structure */
+	ULONG BeaconPeriod;	/* units are Kusec */
+	ULONG ATIMWindow;	/* units are Kusec */
+	ULONG DSConfig;		/* Frequency, units are kHz */
 	NDIS_802_11_CONFIGURATION_FH FHConfig;
 } NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
 
 typedef struct _NDIS_802_11_STATISTICS {
-	ULONG Length;		// Length of structure
+	ULONG Length;		/* Length of structure */
 	LARGE_INTEGER TransmittedFragmentCount;
 	LARGE_INTEGER MulticastTransmittedFrameCount;
 	LARGE_INTEGER FailedCount;
@@ -245,7 +245,7 @@
 typedef ULONG NDIS_802_11_KEY_INDEX;
 typedef ULONGLONG NDIS_802_11_KEY_RSC;
 
-#define MAX_RADIUS_SRV_NUM			2	// 802.1x failover number
+#define MAX_RADIUS_SRV_NUM			2	/* 802.1x failover number */
 
 typedef struct PACKED _RADIUS_SRV_INFO {
 	UINT32 radius_ip;
@@ -257,16 +257,16 @@
 typedef struct PACKED _RADIUS_KEY_INFO {
 	UCHAR radius_srv_num;
 	RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
-	UCHAR ieee8021xWEP;	// dynamic WEP
+	UCHAR ieee8021xWEP;	/* dynamic WEP */
 	UCHAR key_index;
-	UCHAR key_length;	// length of key in bytes
+	UCHAR key_length;	/* length of key in bytes */
 	UCHAR key_material[13];
 } RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
 
-// It's used by 802.1x daemon to require relative configuration
+/* It's used by 802.1x daemon to require relative configuration */
 typedef struct PACKED _RADIUS_CONF {
-	UINT32 Length;		// Length of this structure
-	UCHAR mbss_num;		// indicate multiple BSS number
+	UINT32 Length;		/* Length of this structure */
+	UCHAR mbss_num;		/* indicate multiple BSS number */
 	UINT32 own_ip_addr;
 	UINT32 retry_interval;
 	UINT32 session_timeout_interval;
@@ -277,34 +277,34 @@
 	RADIUS_KEY_INFO RadiusInfo[8];
 } RADIUS_CONF, *PRADIUS_CONF;
 
-// Key mapping keys require a BSSID
+/* Key mapping keys require a BSSID */
 typedef struct _NDIS_802_11_KEY {
-	UINT Length;		// Length of this structure
+	UINT Length;		/* Length of this structure */
 	UINT KeyIndex;
-	UINT KeyLength;		// length of key in bytes
+	UINT KeyLength;		/* length of key in bytes */
 	NDIS_802_11_MAC_ADDRESS BSSID;
 	NDIS_802_11_KEY_RSC KeyRSC;
-	UCHAR KeyMaterial[1];	// variable length depending on above field
+	UCHAR KeyMaterial[1];	/* variable length depending on above field */
 } NDIS_802_11_KEY, *PNDIS_802_11_KEY;
 
 typedef struct _NDIS_802_11_PASSPHRASE {
-	UINT KeyLength;		// length of key in bytes
+	UINT KeyLength;		/* length of key in bytes */
 	NDIS_802_11_MAC_ADDRESS BSSID;
-	UCHAR KeyMaterial[1];	// variable length depending on above field
+	UCHAR KeyMaterial[1];	/* variable length depending on above field */
 } NDIS_802_11_PASSPHRASE, *PNDIS_802_11_PASSPHRASE;
 
 typedef struct _NDIS_802_11_REMOVE_KEY {
-	UINT Length;		// Length of this structure
+	UINT Length;		/* Length of this structure */
 	UINT KeyIndex;
 	NDIS_802_11_MAC_ADDRESS BSSID;
 } NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
 
 typedef struct _NDIS_802_11_WEP {
-	UINT Length;		// Length of this structure
-	UINT KeyIndex;		// 0 is the per-client key, 1-N are the
-	// global keys
-	UINT KeyLength;		// length of key in bytes
-	UCHAR KeyMaterial[1];	// variable length depending on above field
+	UINT Length;		/* Length of this structure */
+	UINT KeyIndex;		/* 0 is the per-client key, 1-N are the */
+	/* global keys */
+	UINT KeyLength;		/* length of key in bytes */
+	UCHAR KeyMaterial[1];	/* variable length depending on above field */
 } NDIS_802_11_WEP, *PNDIS_802_11_WEP;
 
 typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE {
@@ -312,10 +312,10 @@
 	Ndis802_11Infrastructure,
 	Ndis802_11AutoUnknown,
 	Ndis802_11Monitor,
-	Ndis802_11InfrastructureMax	// Not a real value, defined as upper bound
+	Ndis802_11InfrastructureMax	/* Not a real value, defined as upper bound */
 } NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
 
-// Add new authentication modes
+/* Add new authentication modes */
 typedef enum _NDIS_802_11_AUTHENTICATION_MODE {
 	Ndis802_11AuthModeOpen,
 	Ndis802_11AuthModeShared,
@@ -327,25 +327,25 @@
 	Ndis802_11AuthModeWPA2PSK,
 	Ndis802_11AuthModeWPA1WPA2,
 	Ndis802_11AuthModeWPA1PSKWPA2PSK,
-	Ndis802_11AuthModeMax	// Not a real mode, defined as upper bound
+	Ndis802_11AuthModeMax	/* Not a real mode, defined as upper bound */
 } NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
 
-typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];	// Set of 8 data rates
-typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];	// Set of 16 data rates
+typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];	/* Set of 8 data rates */
+typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];	/* Set of 16 data rates */
 
 typedef struct PACKED _NDIS_802_11_SSID {
-	UINT SsidLength;	// length of SSID field below, in bytes;
-	// this can be zero.
-	UCHAR Ssid[NDIS_802_11_LENGTH_SSID];	// SSID information field
+	UINT SsidLength;	/* length of SSID field below, in bytes; */
+	/* this can be zero. */
+	UCHAR Ssid[NDIS_802_11_LENGTH_SSID];	/* SSID information field */
 } NDIS_802_11_SSID, *PNDIS_802_11_SSID;
 
 typedef struct PACKED _NDIS_WLAN_BSSID {
-	ULONG Length;		// Length of this structure
-	NDIS_802_11_MAC_ADDRESS MacAddress;	// BSSID
+	ULONG Length;		/* Length of this structure */
+	NDIS_802_11_MAC_ADDRESS MacAddress;	/* BSSID */
 	UCHAR Reserved[2];
-	NDIS_802_11_SSID Ssid;	// SSID
-	ULONG Privacy;		// WEP encryption requirement
-	NDIS_802_11_RSSI Rssi;	// receive signal strength in dBm
+	NDIS_802_11_SSID Ssid;	/* SSID */
+	ULONG Privacy;		/* WEP encryption requirement */
+	NDIS_802_11_RSSI Rssi;	/* receive signal strength in dBm */
 	NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
 	NDIS_802_11_CONFIGURATION Configuration;
 	NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
@@ -353,19 +353,19 @@
 } NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
 
 typedef struct PACKED _NDIS_802_11_BSSID_LIST {
-	UINT NumberOfItems;	// in list below, at least 1
+	UINT NumberOfItems;	/* in list below, at least 1 */
 	NDIS_WLAN_BSSID Bssid[1];
 } NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
 
-// Added Capabilities, IELength and IEs for each BSSID
+/* Added Capabilities, IELength and IEs for each BSSID */
 typedef struct PACKED _NDIS_WLAN_BSSID_EX {
-	ULONG Length;		// Length of this structure
-	NDIS_802_11_MAC_ADDRESS MacAddress;	// BSSID
+	ULONG Length;		/* Length of this structure */
+	NDIS_802_11_MAC_ADDRESS MacAddress;	/* BSSID */
 	UCHAR Reserved[2];
-	NDIS_802_11_SSID Ssid;	// SSID
-	UINT Privacy;		// WEP encryption requirement
-	NDIS_802_11_RSSI Rssi;	// receive signal
-	// strength in dBm
+	NDIS_802_11_SSID Ssid;	/* SSID */
+	UINT Privacy;		/* WEP encryption requirement */
+	NDIS_802_11_RSSI Rssi;	/* receive signal */
+	/* strength in dBm */
 	NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
 	NDIS_802_11_CONFIGURATION Configuration;
 	NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
@@ -375,7 +375,7 @@
 } NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
 
 typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX {
-	UINT NumberOfItems;	// in list below, at least 1
+	UINT NumberOfItems;	/* in list below, at least 1 */
 	NDIS_WLAN_BSSID_EX Bssid[1];
 } NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
 
@@ -387,7 +387,7 @@
 
 typedef struct _NDIS_802_11_VARIABLE_IEs {
 	UCHAR ElementID;
-	UCHAR Length;		// Number of bytes in data field
+	UCHAR Length;		/* Number of bytes in data field */
 	UCHAR data[1];
 } NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
 
@@ -402,8 +402,8 @@
 	Ndis802_11PrivFilter8021xWEP
 } NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
 
-// Added new encryption types
-// Also aliased typedef to new name
+/* Added new encryption types */
+/* Also aliased typedef to new name */
 typedef enum _NDIS_802_11_WEP_STATUS {
 	Ndis802_11WEPEnabled,
 	Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
@@ -417,7 +417,7 @@
 	Ndis802_11Encryption2KeyAbsent,
 	Ndis802_11Encryption3Enabled,
 	Ndis802_11Encryption3KeyAbsent,
-	Ndis802_11Encryption4Enabled,	// TKIP or AES mix
+	Ndis802_11Encryption4Enabled,	/* TKIP or AES mix */
 	Ndis802_11Encryption4KeyAbsent,
 	Ndis802_11GroupWEP40Enabled,
 	Ndis802_11GroupWEP104Enabled,
@@ -465,13 +465,13 @@
 	NDIS_802_11_AUTHENTICATION_REQUEST Request[1];
 } NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
 
-// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
+/* 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE */
 typedef enum _NDIS_802_11_MEDIA_STREAM_MODE {
 	Ndis802_11MediaStreamOff,
 	Ndis802_11MediaStreamOn,
 } NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
 
-// PMKID Structures
+/* PMKID Structures */
 typedef UCHAR NDIS_802_11_PMKID_VALUE[16];
 
 typedef struct _BSSID_INFO {
@@ -500,14 +500,14 @@
 	    AuthenticationEncryptionSupported[1];
 } NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
 
-#define RT_PRIV_IOCTL							(SIOCIWFIRSTPRIV + 0x01)	// Sync. with AP for wsc upnp daemon
+#define RT_PRIV_IOCTL							(SIOCIWFIRSTPRIV + 0x01)	/* Sync. with AP for wsc upnp daemon */
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
 #define RTPRIV_IOCTL_GSITESURVEY					(SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x0E)	// Sync. with RT61 (for wpa_supplicant)
+#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x0E)	/* Sync. with RT61 (for wpa_supplicant) */
 #define RTPRIV_IOCTL_GET_MAC_TABLE					(SIOCIWFIRSTPRIV + 0x0F)
 
 #define RTPRIV_IOCTL_SHOW							(SIOCIWFIRSTPRIV + 0x11)
@@ -519,7 +519,7 @@
 #ifdef RTMP_MAC_USB
 	SHOW_RXBULK_INFO = 8,
 	SHOW_TXBULK_INFO = 9,
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 	RAIO_OFF = 10,
 	RAIO_ON = 11,
 	SHOW_CFG_VALUE = 20,
@@ -531,19 +531,19 @@
 #define OID_802_11_GET_COUNTRY_CODE				0x0716
 #define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
 
-#define RT_OID_WSC_SET_PASSPHRASE                   0x0740	// passphrase for wpa(2)-psk
+#define RT_OID_WSC_SET_PASSPHRASE                   0x0740	/* passphrase for wpa(2)-psk */
 #define RT_OID_WSC_DRIVER_AUTO_CONNECT              0x0741
 #define RT_OID_WSC_QUERY_DEFAULT_PROFILE            0x0742
 #define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX        0x0743
 #define RT_OID_WSC_SET_ACTION                       0x0744
 #define RT_OID_WSC_SET_SSID                         0x0745
 #define RT_OID_WSC_SET_PIN_CODE                     0x0746
-#define RT_OID_WSC_SET_MODE                         0x0747	// PIN or PBC
-#define RT_OID_WSC_SET_CONF_MODE                    0x0748	// Enrollee or Registrar
+#define RT_OID_WSC_SET_MODE                         0x0747	/* PIN or PBC */
+#define RT_OID_WSC_SET_CONF_MODE                    0x0748	/* Enrollee or Registrar */
 #define RT_OID_WSC_SET_PROFILE                      0x0749
 #define	RT_OID_WSC_CONFIG_STATUS					0x074F
 #define RT_OID_802_11_WSC_QUERY_PROFILE				0x0750
-// for consistency with RT61
+/* for consistency with RT61 */
 #define RT_OID_WSC_QUERY_STATUS						0x0751
 #define RT_OID_WSC_PIN_CODE							0x0752
 #define RT_OID_WSC_UUID								0x0753
@@ -555,20 +555,20 @@
 #define RT_OID_WSC_SERIAL_NO						0x0759
 #define RT_OID_WSC_MAC_ADDRESS						0x0760
 
-// New for MeetingHouse Api support
+/* New for MeetingHouse Api support */
 #define OID_MH_802_1X_SUPPORTED               0xFFEDC100
 
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
+/* MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!! */
 typedef union _HTTRANSMIT_SETTING {
 	struct {
-		USHORT MCS:7;	// MCS
-		USHORT BW:1;	//channel bandwidth 20MHz or 40 MHz
+		USHORT MCS:7;	/* MCS */
+		USHORT BW:1;	/*channel bandwidth 20MHz or 40 MHz */
 		USHORT ShortGI:1;
-		USHORT STBC:2;	//SPACE
-//      USHORT          rsv:3;
+		USHORT STBC:2;	/*SPACE */
+/*      USHORT          rsv:3; */
 		USHORT rsv:2;
 		USHORT TxBF:1;
-		USHORT MODE:2;	// Use definition MODE_xxx.
+		USHORT MODE:2;	/* Use definition MODE_xxx. */
 	} field;
 	USHORT word;
 } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
@@ -585,45 +585,45 @@
 	PHY_11A,
 	PHY_11ABG_MIXED,
 	PHY_11G,
-	PHY_11ABGN_MIXED,	// both band   5
-	PHY_11N_2_4G,		// 11n-only with 2.4G band      6
-	PHY_11GN_MIXED,		// 2.4G band      7
-	PHY_11AN_MIXED,		// 5G  band       8
-	PHY_11BGN_MIXED,	// if check 802.11b.      9
-	PHY_11AGN_MIXED,	// if check 802.11b.      10
-	PHY_11N_5G,		// 11n-only with 5G band                11
+	PHY_11ABGN_MIXED,	/* both band   5 */
+	PHY_11N_2_4G,		/* 11n-only with 2.4G band      6 */
+	PHY_11GN_MIXED,		/* 2.4G band      7 */
+	PHY_11AN_MIXED,		/* 5G  band       8 */
+	PHY_11BGN_MIXED,	/* if check 802.11b.      9 */
+	PHY_11AGN_MIXED,	/* if check 802.11b.      10 */
+	PHY_11N_5G,		/* 11n-only with 5G band                11 */
 } RT_802_11_PHY_MODE;
 
-// put all proprietery for-query objects here to reduce # of Query_OID
+/* put all proprietery for-query objects here to reduce # of Query_OID */
 typedef struct _RT_802_11_LINK_STATUS {
-	ULONG CurrTxRate;	// in units of 0.5Mbps
-	ULONG ChannelQuality;	// 0..100 %
-	ULONG TxByteCount;	// both ok and fail
-	ULONG RxByteCount;	// both ok and fail
-	ULONG CentralChannel;	// 40MHz central channel number
+	ULONG CurrTxRate;	/* in units of 0.5Mbps */
+	ULONG ChannelQuality;	/* 0..100 % */
+	ULONG TxByteCount;	/* both ok and fail */
+	ULONG RxByteCount;	/* both ok and fail */
+	ULONG CentralChannel;	/* 40MHz central channel number */
 } RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
 
 typedef struct _RT_802_11_EVENT_LOG {
-	LARGE_INTEGER SystemTime;	// timestammp via NdisGetCurrentSystemTime()
+	LARGE_INTEGER SystemTime;	/* timestammp via NdisGetCurrentSystemTime() */
 	UCHAR Addr[MAC_ADDR_LENGTH];
-	USHORT Event;		// EVENT_xxx
+	USHORT Event;		/* EVENT_xxx */
 } RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
 
 typedef struct _RT_802_11_EVENT_TABLE {
 	ULONG Num;
-	ULONG Rsv;		// to align Log[] at LARGE_INEGER boundary
+	ULONG Rsv;		/* to align Log[] at LARGE_INEGER boundary */
 	RT_802_11_EVENT_LOG Log[MAX_NUMBER_OF_EVENT];
 } RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
 
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
+/* MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!! */
 typedef union _MACHTTRANSMIT_SETTING {
 	struct {
-		USHORT MCS:7;	// MCS
-		USHORT BW:1;	//channel bandwidth 20MHz or 40 MHz
+		USHORT MCS:7;	/* MCS */
+		USHORT BW:1;	/*channel bandwidth 20MHz or 40 MHz */
 		USHORT ShortGI:1;
-		USHORT STBC:2;	//SPACE
+		USHORT STBC:2;	/*SPACE */
 		USHORT rsv:3;
-		USHORT MODE:2;	// Use definition MODE_xxx.
+		USHORT MODE:2;	/* Use definition MODE_xxx. */
 	} field;
 	USHORT word;
 } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
@@ -631,8 +631,8 @@
 typedef struct _RT_802_11_MAC_ENTRY {
 	UCHAR Addr[MAC_ADDR_LENGTH];
 	UCHAR Aid;
-	UCHAR Psm;		// 0:PWR_ACTIVE, 1:PWR_SAVE
-	UCHAR MimoPs;		// 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
+	UCHAR Psm;		/* 0:PWR_ACTIVE, 1:PWR_SAVE */
+	UCHAR MimoPs;		/* 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled */
 	CHAR AvgRssi0;
 	CHAR AvgRssi1;
 	CHAR AvgRssi2;
@@ -645,48 +645,48 @@
 	RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
 } RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
 
-// structure for query/set hardware register - MAC, BBP, RF register
+/* structure for query/set hardware register - MAC, BBP, RF register */
 typedef struct _RT_802_11_HARDWARE_REGISTER {
-	ULONG HardwareType;	// 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
-	ULONG Offset;		// Q/S register offset addr
-	ULONG Data;		// R/W data buffer
+	ULONG HardwareType;	/* 0:MAC, 1:BBP, 2:RF register, 3:EEPROM */
+	ULONG Offset;		/* Q/S register offset addr */
+	ULONG Data;		/* R/W data buffer */
 } RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
 
 typedef struct _RT_802_11_AP_CONFIG {
-	ULONG EnableTxBurst;	// 0-disable, 1-enable
-	ULONG EnableTurboRate;	// 0-disable, 1-enable 72/100mbps turbo rate
-	ULONG IsolateInterStaTraffic;	// 0-disable, 1-enable isolation
-	ULONG HideSsid;		// 0-disable, 1-enable hiding
-	ULONG UseBGProtection;	// 0-AUTO, 1-always ON, 2-always OFF
-	ULONG UseShortSlotTime;	// 0-no use, 1-use 9-us short slot time
-	ULONG Rsv1;		// must be 0
-	ULONG SystemErrorBitmap;	// ignore upon SET, return system error upon QUERY
+	ULONG EnableTxBurst;	/* 0-disable, 1-enable */
+	ULONG EnableTurboRate;	/* 0-disable, 1-enable 72/100mbps turbo rate */
+	ULONG IsolateInterStaTraffic;	/* 0-disable, 1-enable isolation */
+	ULONG HideSsid;		/* 0-disable, 1-enable hiding */
+	ULONG UseBGProtection;	/* 0-AUTO, 1-always ON, 2-always OFF */
+	ULONG UseShortSlotTime;	/* 0-no use, 1-use 9-us short slot time */
+	ULONG Rsv1;		/* must be 0 */
+	ULONG SystemErrorBitmap;	/* ignore upon SET, return system error upon QUERY */
 } RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
 
-// structure to query/set STA_CONFIG
+/* structure to query/set STA_CONFIG */
 typedef struct _RT_802_11_STA_CONFIG {
-	ULONG EnableTxBurst;	// 0-disable, 1-enable
-	ULONG EnableTurboRate;	// 0-disable, 1-enable 72/100mbps turbo rate
-	ULONG UseBGProtection;	// 0-AUTO, 1-always ON, 2-always OFF
-	ULONG UseShortSlotTime;	// 0-no use, 1-use 9-us short slot time when applicable
-	ULONG AdhocMode;	// 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
-	ULONG HwRadioStatus;	// 0-OFF, 1-ON, default is 1, Read-Only
-	ULONG Rsv1;		// must be 0
-	ULONG SystemErrorBitmap;	// ignore upon SET, return system error upon QUERY
+	ULONG EnableTxBurst;	/* 0-disable, 1-enable */
+	ULONG EnableTurboRate;	/* 0-disable, 1-enable 72/100mbps turbo rate */
+	ULONG UseBGProtection;	/* 0-AUTO, 1-always ON, 2-always OFF */
+	ULONG UseShortSlotTime;	/* 0-no use, 1-use 9-us short slot time when applicable */
+	ULONG AdhocMode;	/* 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only */
+	ULONG HwRadioStatus;	/* 0-OFF, 1-ON, default is 1, Read-Only */
+	ULONG Rsv1;		/* must be 0 */
+	ULONG SystemErrorBitmap;	/* ignore upon SET, return system error upon QUERY */
 } RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
 
-//
-//  For OID Query or Set about BA structure
-//
+/* */
+/*  For OID Query or Set about BA structure */
+/* */
 typedef struct _OID_BACAP_STRUC {
 	UCHAR RxBAWinLimit;
 	UCHAR TxBAWinLimit;
-	UCHAR Policy;		// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-	UCHAR MpduDensity;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-	UCHAR AmsduEnable;	//Enable AMSDU transmisstion
-	UCHAR AmsduSize;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]        = { 3839, 7935};
-	UCHAR MMPSmode;		// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-	BOOLEAN AutoBA;		// Auto BA will automatically
+	UCHAR Policy;		/* 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid */
+	UCHAR MpduDensity;	/* 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid */
+	UCHAR AmsduEnable;	/*Enable AMSDU transmisstion */
+	UCHAR AmsduSize;	/* 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]        = { 3839, 7935}; */
+	UCHAR MMPSmode;		/* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */
+	BOOLEAN AutoBA;		/* Auto BA will automatically */
 } OID_BACAP_STRUC, *POID_BACAP_STRUC;
 
 typedef struct _RT_802_11_ACL_ENTRY {
@@ -695,7 +695,7 @@
 } RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
 
 typedef struct PACKED _RT_802_11_ACL {
-	ULONG Policy;		// 0-disable, 1-positive list, 2-negative list
+	ULONG Policy;		/* 0-disable, 1-positive list, 2-negative list */
 	ULONG Num;
 	RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
 } RT_802_11_ACL, *PRT_802_11_ACL;
@@ -714,29 +714,29 @@
 	UCHAR ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
 } RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
 
-// Definition of extra information code
-#define	GENERAL_LINK_UP			0x0	// Link is Up
-#define	GENERAL_LINK_DOWN		0x1	// Link is Down
-#define	HW_RADIO_OFF			0x2	// Hardware radio off
-#define	SW_RADIO_OFF			0x3	// Software radio off
-#define	AUTH_FAIL				0x4	// Open authentication fail
-#define	AUTH_FAIL_KEYS			0x5	// Shared authentication fail
-#define	ASSOC_FAIL				0x6	// Association failed
-#define	EAP_MIC_FAILURE			0x7	// Deauthencation because MIC failure
-#define	EAP_4WAY_TIMEOUT		0x8	// Deauthencation on 4-way handshake timeout
-#define	EAP_GROUP_KEY_TIMEOUT	0x9	// Deauthencation on group key handshake timeout
-#define	EAP_SUCCESS				0xa	// EAP succeed
-#define	DETECT_RADAR_SIGNAL		0xb	// Radar signal occur in current channel
-#define EXTRA_INFO_MAX			0xb	// Indicate Last OID
+/* Definition of extra information code */
+#define	GENERAL_LINK_UP			0x0	/* Link is Up */
+#define	GENERAL_LINK_DOWN		0x1	/* Link is Down */
+#define	HW_RADIO_OFF			0x2	/* Hardware radio off */
+#define	SW_RADIO_OFF			0x3	/* Software radio off */
+#define	AUTH_FAIL				0x4	/* Open authentication fail */
+#define	AUTH_FAIL_KEYS			0x5	/* Shared authentication fail */
+#define	ASSOC_FAIL				0x6	/* Association failed */
+#define	EAP_MIC_FAILURE			0x7	/* Deauthencation because MIC failure */
+#define	EAP_4WAY_TIMEOUT		0x8	/* Deauthencation on 4-way handshake timeout */
+#define	EAP_GROUP_KEY_TIMEOUT	0x9	/* Deauthencation on group key handshake timeout */
+#define	EAP_SUCCESS				0xa	/* EAP succeed */
+#define	DETECT_RADAR_SIGNAL		0xb	/* Radar signal occur in current channel */
+#define EXTRA_INFO_MAX			0xb	/* Indicate Last OID */
 
 #define EXTRA_INFO_CLEAR		0xffffffff
 
-// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
+/* This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use. */
 typedef struct {
-	RT_802_11_PHY_MODE PhyMode;	//
+	RT_802_11_PHY_MODE PhyMode;	/* */
 	UCHAR TransmitNo;
-	UCHAR HtMode;		//HTMODE_GF or HTMODE_MM
-	UCHAR ExtOffset;	//extension channel above or below
+	UCHAR HtMode;		/*HTMODE_GF or HTMODE_MM */
+	UCHAR ExtOffset;	/*extension channel above or below */
 	UCHAR MCS;
 	UCHAR BW;
 	UCHAR STBC;
@@ -753,27 +753,27 @@
 } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
 
 typedef struct _RT_CHANNEL_LIST_INFO {
-	UCHAR ChannelList[MAX_NUM_OF_CHS];	// list all supported channels for site survey
-	UCHAR ChannelListNum;	// number of channel in ChannelList[]
+	UCHAR ChannelList[MAX_NUM_OF_CHS];	/* list all supported channels for site survey */
+	UCHAR ChannelListNum;	/* number of channel in ChannelList[] */
 } RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
 
-// WSC configured credential
+/* WSC configured credential */
 typedef struct _WSC_CREDENTIAL {
-	NDIS_802_11_SSID SSID;	// mandatory
-	USHORT AuthType;	// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
-	USHORT EncrType;	// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
-	UCHAR Key[64];		// mandatory, Maximum 64 byte
+	NDIS_802_11_SSID SSID;	/* mandatory */
+	USHORT AuthType;	/* mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk */
+	USHORT EncrType;	/* mandatory, 1: none, 2: wep, 4: tkip, 8: aes */
+	UCHAR Key[64];		/* mandatory, Maximum 64 byte */
 	USHORT KeyLength;
-	UCHAR MacAddr[6];	// mandatory, AP MAC address
-	UCHAR KeyIndex;		// optional, default is 1
-	UCHAR Rsvd[3];		// Make alignment
+	UCHAR MacAddr[6];	/* mandatory, AP MAC address */
+	UCHAR KeyIndex;		/* optional, default is 1 */
+	UCHAR Rsvd[3];		/* Make alignment */
 } WSC_CREDENTIAL, *PWSC_CREDENTIAL;
 
-// WSC configured profiles
+/* WSC configured profiles */
 typedef struct _WSC_PROFILE {
 	UINT ProfileCnt;
-	UINT ApplyProfileIdx;	// add by johnli, fix WPS test plan 5.1.1
-	WSC_CREDENTIAL Profile[8];	// Support up to 8 profiles
+	UINT ApplyProfileIdx;	/* add by johnli, fix WPS test plan 5.1.1 */
+	WSC_CREDENTIAL Profile[8];	/* Support up to 8 profiles */
 } WSC_PROFILE, *PWSC_PROFILE;
 
-#endif // _OID_H_
+#endif /* _OID_H_ */
diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h
index 8fa3f11..d1adef8 100644
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -66,6 +66,6 @@
 
 #ifdef IGMP_SNOOP_SUPPORT
 #include "igmp_snoop.h"
-#endif // IGMP_SNOOP_SUPPORT //
+#endif /* IGMP_SNOOP_SUPPORT // */
 
-#endif // __RT_CONFIG_H__
+#endif /* __RT_CONFIG_H__ */
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 478c8d0..1e27c66 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -60,20 +60,20 @@
 
 #include <net/iw_handler.h>
 
-// load firmware
+/* load firmware */
 #define __KERNEL_SYSCALLS__
 #include <linux/unistd.h>
 #include <asm/uaccess.h>
 #include <asm/types.h>
-#include <asm/unaligned.h>	// for get_unaligned()
+#include <asm/unaligned.h>	/* for get_unaligned() */
 
 #define KTHREAD_SUPPORT 1
-// RT2870 2.1.0.0 has it disabled
+/* RT2870 2.1.0.0 has it disabled */
 
 #ifdef KTHREAD_SUPPORT
 #include <linux/err.h>
 #include <linux/kthread.h>
-#endif // KTHREAD_SUPPORT //
+#endif /* KTHREAD_SUPPORT // */
 
 /***********************************************************************************
  *	Profile related sections
@@ -82,12 +82,12 @@
 #ifdef RTMP_MAC_PCI
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2860STA/RT2860STA.dat"
 #define STA_DRIVER_VERSION			"2.1.0.0"
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2870STA/RT2870STA.dat"
 #define STA_DRIVER_VERSION			"2.1.0.0"
-// RT3070 version: 2.1.1.0
-#endif // RTMP_MAC_USB //
+/* RT3070 version: 2.1.1.0 */
+#endif /* RTMP_MAC_USB // */
 
 extern const struct iw_handler_def rt28xx_iw_handler_def;
 
@@ -124,8 +124,8 @@
 #define PCI_DEVICE(vend,dev) \
 	.vendor = (vend), .device = (dev), \
 	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
-#endif // PCI_DEVICE //
-#endif // RTMP_MAC_PCI //
+#endif /* PCI_DEVICE // */
+#endif /* RTMP_MAC_PCI // */
 
 #define RT_MOD_INC_USE_COUNT() \
 	if (!try_module_get(THIS_MODULE)) \
@@ -140,7 +140,7 @@
 #define RTMP_DEC_REF(_A)		0
 #define RTMP_GET_REF(_A)		0
 
-// This function will be called when query /proc
+/* This function will be called when query /proc */
 struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev);
 
 /***********************************************************************************
@@ -176,13 +176,13 @@
 /***********************************************************************************
  *	Ralink Specific network related constant definitions
  ***********************************************************************************/
-#define MIN_NET_DEVICE_FOR_AID			0x00	//0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID		0x00	//0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS			0x10	//0x40,0x50,0x60,0x70
+#define MIN_NET_DEVICE_FOR_AID			0x00	/*0x00~0x3f */
+#define MIN_NET_DEVICE_FOR_MBSSID		0x00	/*0x00,0x10,0x20,0x30 */
+#define MIN_NET_DEVICE_FOR_WDS			0x10	/*0x40,0x50,0x60,0x70 */
 #define MIN_NET_DEVICE_FOR_APCLI		0x20
 #define MIN_NET_DEVICE_FOR_MESH			0x30
 #define MIN_NET_DEVICE_FOR_DLS			0x40
-#define NET_DEVICE_REAL_IDX_MASK		0x0f	// for each operation mode, we maximum support 15 entities.
+#define NET_DEVICE_REAL_IDX_MASK		0x0f	/* for each operation mode, we maximum support 15 entities. */
 
 #define NDIS_PACKET_TYPE_DIRECTED		0
 #define NDIS_PACKET_TYPE_MULTICAST		1
@@ -217,9 +217,9 @@
 
 typedef spinlock_t NDIS_SPIN_LOCK;
 
-//
-//  spin_lock enhanced for Nested spin lock
-//
+/* */
+/*  spin_lock enhanced for Nested spin lock */
+/* */
 #define NdisAllocateSpinLock(__lock)      \
 {                                       \
     spin_lock_init((spinlock_t *)(__lock));               \
@@ -238,7 +238,7 @@
 	spin_unlock_bh((spinlock_t *)(__lock));		\
 }
 
-// sample, use semaphore lock to replace IRQ lock, 2007/11/15
+/* sample, use semaphore lock to replace IRQ lock, 2007/11/15 */
 #define RTMP_IRQ_LOCK(__lock, __irqflags)			\
 {													\
 	__irqflags = 0;									\
@@ -330,7 +330,7 @@
 /***********************************************************************************
  *	OS Memory Access related data structure and definitions
  ***********************************************************************************/
-#define MEM_ALLOC_FLAG      (GFP_ATOMIC)	//(GFP_DMA | GFP_ATOMIC)
+#define MEM_ALLOC_FLAG      (GFP_ATOMIC)	/*(GFP_DMA | GFP_ATOMIC) */
 
 #define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
 #define NdisCopyMemory(Destination, Source, Length) memcpy(Destination, Source, Length)
@@ -405,10 +405,10 @@
 	struct pci_dev *parent_pci_dev;
 	USHORT DeviceID;
 	dma_addr_t pAd_pa;
-#endif				// RTMP_MAC_PCI //
+#endif				/* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 	struct usb_device *pUsb_Dev;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
 	RTMP_NET_TASK_STRUCT rx_done_task;
 	RTMP_NET_TASK_STRUCT mgmt_dma_done_task;
@@ -419,14 +419,14 @@
 	RTMP_NET_TASK_STRUCT tbtt_task;
 #ifdef RTMP_MAC_PCI
 	RTMP_NET_TASK_STRUCT fifo_statistic_full_task;
-#endif				// RTMP_MAC_PCI //
+#endif				/* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 	RTMP_NET_TASK_STRUCT null_frame_complete_task;
 	RTMP_NET_TASK_STRUCT rts_frame_complete_task;
 	RTMP_NET_TASK_STRUCT pspoll_frame_complete_task;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
-	unsigned long apd_pid;	//802.1x daemon pid
+	unsigned long apd_pid;	/*802.1x daemon pid */
 	INT ioctl_if_type;
 	INT ioctl_if;
 };
@@ -501,12 +501,12 @@
 
 #define DEV_ALLOC_SKB(_length) \
 	dev_alloc_skb(_length)
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 #define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
 
 #define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 /*
  * ULONG
@@ -545,7 +545,7 @@
  * Device Register I/O Access related definitions and data structures.
  **********************************************************************************/
 #ifdef RTMP_MAC_PCI
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
+/*Patch for ASIC turst read/write bug, needs to remove after metel fix */
 #define RTMP_IO_READ32(_A, _R, _pV)								\
 {																\
     if ((_A)->bPCIclkOff == FALSE)                                  \
@@ -603,7 +603,7 @@
 	Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0));			\
 	writeb((_V), (PUCHAR)((_A)->CSRBaseAddress + (_R)));		\
 }
-#endif // #if defined(BRCM_6358) || defined(RALINK_2880) //
+#endif /* #if defined(BRCM_6358) || defined(RALINK_2880) // */
 
 #define RTMP_IO_WRITE16(_A, _R, _V)												\
 {																				\
@@ -611,9 +611,9 @@
 	Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0));			\
 	writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R)));	\
 }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
+/*Patch for ASIC turst read/write bug, needs to remove after metel fix */
 #define RTMP_IO_READ32(_A, _R, _pV)								\
 	RTUSBReadMACRegister((_A), (_R), (PUINT32) (_pV))
 
@@ -634,7 +634,7 @@
 {																\
 	RTUSBSingleWrite((_A), (_R), (USHORT) (_V));								\
 }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 /***********************************************************************************
  *	Network Related data structure and marco definitions
@@ -719,34 +719,34 @@
 
 #define CB_OFF  10
 
-// User Priority
+/* User Priority */
 #define RTMP_SET_PACKET_UP(_p, _prio)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio)
 #define RTMP_GET_PACKET_UP(_p)					(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0])
 
-// Fragment #
+/* Fragment # */
 #define RTMP_SET_PACKET_FRAGMENTS(_p, _num)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num)
 #define RTMP_GET_PACKET_FRAGMENTS(_p)			(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1])
 
-// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too.
-//(this value also as MAC(on-chip WCID) table index)
-// 0x80~0xff: TX to a WDS link. b0~6: WDS index
+/* 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too. */
+/*(this value also as MAC(on-chip WCID) table index) */
+/* 0x80~0xff: TX to a WDS link. b0~6: WDS index */
 #define RTMP_SET_PACKET_WCID(_p, _wdsidx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx)
 #define RTMP_GET_PACKET_WCID(_p)          		((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2]))
 
-// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet
+/* 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet */
 #define RTMP_SET_PACKET_SOURCE(_p, _pktsrc)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc)
 #define RTMP_GET_PACKET_SOURCE(_p)       		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3])
 
-// RTS/CTS-to-self protection method
+/* RTS/CTS-to-self protection method */
 #define RTMP_SET_PACKET_RTS(_p, _num)      		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num)
 #define RTMP_GET_PACKET_RTS(_p)          		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4])
-// see RTMP_S(G)ET_PACKET_EMACTAB
+/* see RTMP_S(G)ET_PACKET_EMACTAB */
 
-// TX rate index
+/* TX rate index */
 #define RTMP_SET_PACKET_TXRATE(_p, _rate)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate)
 #define RTMP_GET_PACKET_TXRATE(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5])
 
-// From which Interface
+/* From which Interface */
 #define RTMP_SET_PACKET_IF(_p, _ifdx)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx)
 #define RTMP_GET_PACKET_IF(_p)		  		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6])
 #define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss)		RTMP_SET_PACKET_IF((_p), (_bss))
@@ -759,9 +759,9 @@
 #define RTMP_SET_PACKET_MOREDATA(_p, _morebit)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
 #define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
 
-//
-//      Sepcific Pakcet Type definition
-//
+/* */
+/*      Sepcific Pakcet Type definition */
+/* */
 #define RTMP_PACKET_SPECIFIC_CB_OFFSET	11
 
 #define RTMP_PACKET_SPECIFIC_DHCP		0x01
@@ -771,10 +771,10 @@
 #define RTMP_PACKET_SPECIFIC_VLAN		0x10
 #define RTMP_PACKET_SPECIFIC_LLCSNAP	0x20
 
-//Specific
+/*Specific */
 #define RTMP_SET_PACKET_SPECIFIC(_p, _flg)	   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
 
-//DHCP
+/*DHCP */
 #define RTMP_SET_PACKET_DHCP(_p, _flg)   													\
 			do{																				\
 				if (_flg)																	\
@@ -784,7 +784,7 @@
 			}while(0)
 #define RTMP_GET_PACKET_DHCP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP)
 
-//EAPOL
+/*EAPOL */
 #define RTMP_SET_PACKET_EAPOL(_p, _flg)   													\
 			do{																				\
 				if (_flg)																	\
@@ -794,7 +794,7 @@
 			}while(0)
 #define RTMP_GET_PACKET_EAPOL(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL)
 
-//WAI
+/*WAI */
 #define RTMP_SET_PACKET_WAI(_p, _flg)   													\
 			do{																				\
 				if (_flg)																	\
@@ -806,7 +806,7 @@
 
 #define RTMP_GET_PACKET_LOWRATE(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI))
 
-//VLAN
+/*VLAN */
 #define RTMP_SET_PACKET_VLAN(_p, _flg)   													\
 			do{																				\
 				if (_flg)																	\
@@ -816,7 +816,7 @@
 			}while(0)
 #define RTMP_GET_PACKET_VLAN(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN)
 
-//LLC/SNAP
+/*LLC/SNAP */
 #define RTMP_SET_PACKET_LLCSNAP(_p, _flg)   													\
 			do{																				\
 				if (_flg)																	\
@@ -827,7 +827,7 @@
 
 #define RTMP_GET_PACKET_LLCSNAP(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP)
 
-// IP
+/* IP */
 #define RTMP_SET_PACKET_IPV4(_p, _flg)														\
 			do{																				\
 				if (_flg)																	\
@@ -838,7 +838,7 @@
 
 #define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
 
-// If this flag is set, it indicates that this EAPoL frame MUST be clear.
+/* If this flag is set, it indicates that this EAPoL frame MUST be clear. */
 #define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
 #define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
 
@@ -860,7 +860,7 @@
 #define IRQ_HANDLE_TYPE  irqreturn_t
 
 IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 INT rt28xx_sta_ioctl(IN PNET_DEV net_dev, IN OUT struct ifreq *rq, IN INT cmd);
 
@@ -869,4 +869,4 @@
 
 #define GET_PAD_FROM_NET_DEV(_pAd, _net_dev)	(_pAd) = (PRTMP_ADAPTER)(_net_dev)->ml_priv;
 
-#endif // __RT_LINUX_H__ //
+#endif /* __RT_LINUX_H__ // */
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index f6b8f62..2ac9663 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -49,14 +49,14 @@
 
 typedef struct _RTMP_CHIP_OP_ RTMP_CHIP_OP;
 
-//#define DBG           1
+/*#define DBG           1 */
 
-//#define DBG_DIAGNOSE          1
+/*#define DBG_DIAGNOSE          1 */
 
-//+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+/*+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */
 #define MAX_DATAMM_RETRY	3
 #define MGMT_USE_QUEUE_FLAG	0x80
-//---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function
+/*---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */
 
 #define	MAXSEQ		(0xFFF)
 
@@ -79,7 +79,7 @@
 extern UCHAR EAPOL[2];
 extern UCHAR IPX[2];
 extern UCHAR APPLE_TALK[2];
-extern UCHAR RateIdToPlcpSignal[12];	// see IEEE802.11a-1999 p.14
+extern UCHAR RateIdToPlcpSignal[12];	/* see IEEE802.11a-1999 p.14 */
 extern UCHAR OfdmRateToRxwiMCS[];
 extern UCHAR OfdmSignalToRateId[16];
 extern UCHAR default_cwmin[4];
@@ -147,9 +147,9 @@
 extern UCHAR PRE_N_HT_OUI[];
 
 typedef struct _RSSI_SAMPLE {
-	CHAR LastRssi0;		// last received RSSI
-	CHAR LastRssi1;		// last received RSSI
-	CHAR LastRssi2;		// last received RSSI
+	CHAR LastRssi0;		/* last received RSSI */
+	CHAR LastRssi1;		/* last received RSSI */
+	CHAR LastRssi2;		/* last received RSSI */
 	CHAR AvgRssi0;
 	CHAR AvgRssi1;
 	CHAR AvgRssi2;
@@ -158,14 +158,14 @@
 	SHORT AvgRssi2X8;
 } RSSI_SAMPLE;
 
-//
-//  Queue structure and macros
-//
+/* */
+/*  Queue structure and macros */
+/* */
 typedef struct _QUEUE_ENTRY {
 	struct _QUEUE_ENTRY *Next;
 } QUEUE_ENTRY, *PQUEUE_ENTRY;
 
-// Queue structure
+/* Queue structure */
 typedef struct _QUEUE_HEADER {
 	PQUEUE_ENTRY Head;
 	PQUEUE_ENTRY Tail;
@@ -224,15 +224,15 @@
 	(QueueHeader)->Number++;											\
 }
 
-//
-//  Macros for flag and ref count operations
-//
+/* */
+/*  Macros for flag and ref count operations */
+/* */
 #define RTMP_SET_FLAG(_M, _F)       ((_M)->Flags |= (_F))
 #define RTMP_CLEAR_FLAG(_M, _F)     ((_M)->Flags &= ~(_F))
 #define RTMP_CLEAR_FLAGS(_M)        ((_M)->Flags = 0)
 #define RTMP_TEST_FLAG(_M, _F)      (((_M)->Flags & (_F)) != 0)
 #define RTMP_TEST_FLAGS(_M, _F)     (((_M)->Flags & (_F)) == (_F))
-// Macro for power save flag.
+/* Macro for power save flag. */
 #define RTMP_SET_PSFLAG(_M, _F)       ((_M)->PSFlags |= (_F))
 #define RTMP_CLEAR_PSFLAG(_M, _F)     ((_M)->PSFlags &= ~(_F))
 #define RTMP_CLEAR_PSFLAGS(_M)        ((_M)->PSFlags = 0)
@@ -266,7 +266,7 @@
     (_idx) = (_idx+1) % (_RingSize);       \
 }
 
-// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon.  Don't need to update here.
+/* StaActive.SupportedHtPhy.MCSSet is copied from AP beacon.  Don't need to update here. */
 #define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
 {                                                                                       \
 	_pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth;      \
@@ -290,25 +290,25 @@
 	_pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor);	\
 }
 
-//
-// MACRO for 32-bit PCI register read / write
-//
-// Usage : RTMP_IO_READ32(
-//              PRTMP_ADAPTER pAd,
-//              ULONG Register_Offset,
-//              PULONG  pValue)
-//
-//         RTMP_IO_WRITE32(
-//              PRTMP_ADAPTER pAd,
-//              ULONG Register_Offset,
-//              ULONG Value)
-//
+/* */
+/* MACRO for 32-bit PCI register read / write */
+/* */
+/* Usage : RTMP_IO_READ32( */
+/*              PRTMP_ADAPTER pAd, */
+/*              ULONG Register_Offset, */
+/*              PULONG  pValue) */
+/* */
+/*         RTMP_IO_WRITE32( */
+/*              PRTMP_ADAPTER pAd, */
+/*              ULONG Register_Offset, */
+/*              ULONG Value) */
+/* */
 
-//
-// Common fragment list structure -  Identical to the scatter gather frag list structure
-//
-//#define RTMP_SCATTER_GATHER_ELEMENT         SCATTER_GATHER_ELEMENT
-//#define PRTMP_SCATTER_GATHER_ELEMENT        PSCATTER_GATHER_ELEMENT
+/* */
+/* Common fragment list structure -  Identical to the scatter gather frag list structure */
+/* */
+/*#define RTMP_SCATTER_GATHER_ELEMENT         SCATTER_GATHER_ELEMENT */
+/*#define PRTMP_SCATTER_GATHER_ELEMENT        PSCATTER_GATHER_ELEMENT */
 #define NIC_MAX_PHYS_BUF_COUNT              8
 
 typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
@@ -323,9 +323,9 @@
 	RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT];
 } RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST;
 
-//
-//  Some utility macros
-//
+/* */
+/*  Some utility macros */
+/* */
 #ifndef min
 #define min(_a, _b)     (((_a) < (_b)) ? (_a) : (_b))
 #endif
@@ -343,11 +343,11 @@
 #define MONITOR_ON(_p)              (((_p)->StaCfg.BssType) == BSS_MONITOR)
 #define IDLE_ON(_p)                 (!INFRA_ON(_p) && !ADHOC_ON(_p))
 
-// Check LEAP & CCKM flags
+/* Check LEAP & CCKM flags */
 #define LEAP_ON(_p)                 (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
 #define LEAP_CCKM_ON(_p)            ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
 
-// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required
+/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */
 #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap)		\
 {																\
 	if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500)		\
@@ -365,7 +365,7 @@
 	}															\
 }
 
-// New Define for new Tx Path.
+/* New Define for new Tx Path. */
 #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap)	\
 {																\
 	if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500)			\
@@ -390,13 +390,13 @@
     NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \
 }
 
-// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way.
-// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field
-// else remove the LLC/SNAP field from the result Ethernet frame
-// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload
-// Note:
-//     _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO
-//     _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed
+/* if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. */
+/* else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field */
+/* else remove the LLC/SNAP field from the result Ethernet frame */
+/* Patch for WHQL only, which did not turn on Netbios but use IPX within its payload */
+/* Note: */
+/*     _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO */
+/*     _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed */
 #define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP)      \
 {                                                                       \
     char LLC_Len[2];                                                    \
@@ -430,9 +430,9 @@
     }                                                                   \
 }
 
-// Enqueue this frame to MLME engine
-// We need to enqueue the whole frame because MLME need to pass data type
-// information from 802.11 header
+/* Enqueue this frame to MLME engine */
+/* We need to enqueue the whole frame because MLME need to pass data type */
+/* information from 802.11 header */
 #ifdef RTMP_MAC_PCI
 #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
 {                                                                                       \
@@ -441,21 +441,21 @@
     RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF);                                        \
     MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
 }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal)        \
 {                                                                                       \
     UINT32 High32TSF=0, Low32TSF=0;                                                          \
     MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal);   \
 }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #define MAC_ADDR_EQUAL(pAddr1,pAddr2)           RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
 #define SSID_EQUAL(ssid1, len1, ssid2, len2)    ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
 
-//
-// Check if it is Japan W53(ch52,56,60,64) channel.
-//
+/* */
+/* Check if it is Japan W53(ch52,56,60,64) channel. */
+/* */
 #define JapanChannelCheck(channel)  ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
 
 #define STA_EXTRA_SETTING(_pAd)
@@ -472,67 +472,67 @@
 	STA_EXTRA_SETTING(_pAd); \
 }
 
-//
-//  Data buffer for DMA operation, the buffer must be contiguous physical memory
-//  Both DMA to / from CPU use the same structure.
-//
+/* */
+/*  Data buffer for DMA operation, the buffer must be contiguous physical memory */
+/*  Both DMA to / from CPU use the same structure. */
+/* */
 typedef struct _RTMP_DMABUF {
 	ULONG AllocSize;
-	PVOID AllocVa;		// TxBuf virtual address
-	NDIS_PHYSICAL_ADDRESS AllocPa;	// TxBuf physical address
+	PVOID AllocVa;		/* TxBuf virtual address */
+	NDIS_PHYSICAL_ADDRESS AllocPa;	/* TxBuf physical address */
 } RTMP_DMABUF, *PRTMP_DMABUF;
 
-//
-// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
-// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
-// which won't be released, driver has to wait until upper layer return the packet
-// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair
-// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor
-// which driver should ACK upper layer when the tx is physically done or failed.
-//
+/* */
+/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */
+/* contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor */
+/* which won't be released, driver has to wait until upper layer return the packet */
+/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */
+/* to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor */
+/* which driver should ACK upper layer when the tx is physically done or failed. */
+/* */
 typedef struct _RTMP_DMACB {
-	ULONG AllocSize;	// Control block size
-	PVOID AllocVa;		// Control block virtual address
-	NDIS_PHYSICAL_ADDRESS AllocPa;	// Control block physical address
+	ULONG AllocSize;	/* Control block size */
+	PVOID AllocVa;		/* Control block virtual address */
+	NDIS_PHYSICAL_ADDRESS AllocPa;	/* Control block physical address */
 	PNDIS_PACKET pNdisPacket;
 	PNDIS_PACKET pNextNdisPacket;
 
-	RTMP_DMABUF DmaBuf;	// Associated DMA buffer structure
+	RTMP_DMABUF DmaBuf;	/* Associated DMA buffer structure */
 } RTMP_DMACB, *PRTMP_DMACB;
 
 typedef struct _RTMP_TX_RING {
 	RTMP_DMACB Cell[TX_RING_SIZE];
 	UINT32 TxCpuIdx;
 	UINT32 TxDmaIdx;
-	UINT32 TxSwFreeIdx;	// software next free tx index
+	UINT32 TxSwFreeIdx;	/* software next free tx index */
 } RTMP_TX_RING, *PRTMP_TX_RING;
 
 typedef struct _RTMP_RX_RING {
 	RTMP_DMACB Cell[RX_RING_SIZE];
 	UINT32 RxCpuIdx;
 	UINT32 RxDmaIdx;
-	INT32 RxSwReadIdx;	// software next read index
+	INT32 RxSwReadIdx;	/* software next read index */
 } RTMP_RX_RING, *PRTMP_RX_RING;
 
 typedef struct _RTMP_MGMT_RING {
 	RTMP_DMACB Cell[MGMT_RING_SIZE];
 	UINT32 TxCpuIdx;
 	UINT32 TxDmaIdx;
-	UINT32 TxSwFreeIdx;	// software next free tx index
+	UINT32 TxSwFreeIdx;	/* software next free tx index */
 } RTMP_MGMT_RING, *PRTMP_MGMT_RING;
 
-//
-//  Statistic counter structure
-//
+/* */
+/*  Statistic counter structure */
+/* */
 typedef struct _COUNTER_802_3 {
-	// General Stats
+	/* General Stats */
 	ULONG GoodTransmits;
 	ULONG GoodReceives;
 	ULONG TxErrors;
 	ULONG RxErrors;
 	ULONG RxNoBuffer;
 
-	// Ethernet Stats
+	/* Ethernet Stats */
 	ULONG RcvAlignmentErrors;
 	ULONG OneCollision;
 	ULONG MoreCollisions;
@@ -557,8 +557,8 @@
 } COUNTER_802_11, *PCOUNTER_802_11;
 
 typedef struct _COUNTER_RALINK {
-	ULONG TransmittedByteCount;	// both successful and failure, used to calculate TX throughput
-	ULONG ReceivedByteCount;	// both CRC okay and CRC error, used to calculate RX throughput
+	ULONG TransmittedByteCount;	/* both successful and failure, used to calculate TX throughput */
+	ULONG ReceivedByteCount;	/* both CRC okay and CRC error, used to calculate RX throughput */
 	ULONG BeenDisassociatedCount;
 	ULONG BadCQIAutoRecoveryCount;
 	ULONG PoorCQIRoamingCount;
@@ -580,17 +580,17 @@
 	UINT32 OneSecReceivedByteCount;
 	UINT32 OneSecFrameDuplicateCount;
 
-	UINT32 OneSecTransmittedByteCount;	// both successful and failure, used to calculate TX throughput
+	UINT32 OneSecTransmittedByteCount;	/* both successful and failure, used to calculate TX throughput */
 	UINT32 OneSecTxNoRetryOkCount;
 	UINT32 OneSecTxRetryOkCount;
 	UINT32 OneSecTxFailCount;
-	UINT32 OneSecFalseCCACnt;	// CCA error count, for debug purpose, might move to global counter
-	UINT32 OneSecRxOkCnt;	// RX without error
-	UINT32 OneSecRxOkDataCnt;	// unicast-to-me DATA frame count
-	UINT32 OneSecRxFcsErrCnt;	// CRC error
+	UINT32 OneSecFalseCCACnt;	/* CCA error count, for debug purpose, might move to global counter */
+	UINT32 OneSecRxOkCnt;	/* RX without error */
+	UINT32 OneSecRxOkDataCnt;	/* unicast-to-me DATA frame count */
+	UINT32 OneSecRxFcsErrCnt;	/* CRC error */
 	UINT32 OneSecBeaconSentCnt;
-	UINT32 LastOneSecTotalTxCount;	// OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
-	UINT32 LastOneSecRxOkDataCnt;	// OneSecRxOkDataCnt
+	UINT32 LastOneSecTotalTxCount;	/* OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount */
+	UINT32 LastOneSecRxOkDataCnt;	/* OneSecRxOkDataCnt */
 	ULONG DuplicateRcv;
 	ULONG TxAggCount;
 	ULONG TxNonAggCount;
@@ -622,15 +622,15 @@
 } COUNTER_RALINK, *PCOUNTER_RALINK;
 
 typedef struct _COUNTER_DRS {
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
+	/* to record the each TX rate's quality. 0 is best, the bigger the worse. */
 	USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
 	UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
-	UCHAR TxRateUpPenalty;	// extra # of second penalty due to last unstable condition
-	ULONG CurrTxRateStableTime;	// # of second in current TX rate
+	UCHAR TxRateUpPenalty;	/* extra # of second penalty due to last unstable condition */
+	ULONG CurrTxRateStableTime;	/* # of second in current TX rate */
 	BOOLEAN fNoisyEnvironment;
 	BOOLEAN fLastSecAccordingRSSI;
-	UCHAR LastSecTxRateChangeAction;	// 0: no change, 1:rate UP, 2:rate down
-	UCHAR LastTimeTxRateChangeAction;	//Keep last time value of LastSecTxRateChangeAction
+	UCHAR LastSecTxRateChangeAction;	/* 0: no change, 1:rate UP, 2:rate down */
+	UCHAR LastTimeTxRateChangeAction;	/*Keep last time value of LastSecTxRateChangeAction */
 	ULONG LastTxOkCount;
 } COUNTER_DRS, *PCOUNTER_DRS;
 
@@ -638,22 +638,22 @@
   *	security key related data structure
   **************************************************************************/
 typedef struct _CIPHER_KEY {
-	UCHAR Key[16];		// right now we implement 4 keys, 128 bits max
-	UCHAR RxMic[8];		// make alignment
+	UCHAR Key[16];		/* right now we implement 4 keys, 128 bits max */
+	UCHAR RxMic[8];		/* make alignment */
 	UCHAR TxMic[8];
-	UCHAR TxTsc[6];		// 48bit TSC value
-	UCHAR RxTsc[6];		// 48bit TSC value
-	UCHAR CipherAlg;	// 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
+	UCHAR TxTsc[6];		/* 48bit TSC value */
+	UCHAR RxTsc[6];		/* 48bit TSC value */
+	UCHAR CipherAlg;	/* 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 */
 	UCHAR KeyLen;
 	UCHAR BssId[6];
-	// Key length for each key, 0: entry is invalid
-	UCHAR Type;		// Indicate Pairwise/Group when reporting MIC error
+	/* Key length for each key, 0: entry is invalid */
+	UCHAR Type;		/* Indicate Pairwise/Group when reporting MIC error */
 } CIPHER_KEY, *PCIPHER_KEY;
 
-// structure to define WPA Group Key Rekey Interval
+/* structure to define WPA Group Key Rekey Interval */
 typedef struct PACKED _RT_802_11_WPA_REKEY {
-	ULONG ReKeyMethod;	// mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG ReKeyInterval;	// time-based: seconds, packet-based: kilo-packets
+	ULONG ReKeyMethod;	/* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+	ULONG ReKeyInterval;	/* time-based: seconds, packet-based: kilo-packets */
 } RT_WPA_REKEY, *PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
 
 #ifdef RTMP_MAC_USB
@@ -661,26 +661,26 @@
   *	RTUSB I/O related data structure
   **************************************************************************/
 typedef struct _RT_SET_ASIC_WCID {
-	ULONG WCID;		// mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG SetTid;		// time-based: seconds, packet-based: kilo-packets
-	ULONG DeleteTid;	// time-based: seconds, packet-based: kilo-packets
-	UCHAR Addr[MAC_ADDR_LEN];	// avoid in interrupt when write key
+	ULONG WCID;		/* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+	ULONG SetTid;		/* time-based: seconds, packet-based: kilo-packets */
+	ULONG DeleteTid;	/* time-based: seconds, packet-based: kilo-packets */
+	UCHAR Addr[MAC_ADDR_LEN];	/* avoid in interrupt when write key */
 } RT_SET_ASIC_WCID, *PRT_SET_ASIC_WCID;
 
 typedef struct _RT_SET_ASIC_WCID_ATTRI {
-	ULONG WCID;		// mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
-	ULONG Cipher;		// ASIC Cipher definition
+	ULONG WCID;		/* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */
+	ULONG Cipher;		/* ASIC Cipher definition */
 	UCHAR Addr[ETH_LENGTH_OF_ADDRESS];
 } RT_SET_ASIC_WCID_ATTRI, *PRT_SET_ASIC_WCID_ATTRI;
 
-// for USB interface, avoid in interrupt when write key
+/* for USB interface, avoid in interrupt when write key */
 typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
 	UCHAR MacAddr[6];
-	USHORT MacTabMatchWCID;	// ASIC
+	USHORT MacTabMatchWCID;	/* ASIC */
 	CIPHER_KEY CipherKey;
 } RT_ADD_PAIRWISE_KEY_ENTRY, *PRT_ADD_PAIRWISE_KEY_ENTRY;
 
-// Cipher suite type for mixed mode group cipher, P802.11i-2004
+/* Cipher suite type for mixed mode group cipher, P802.11i-2004 */
 typedef enum _RT_802_11_CIPHER_SUITE_TYPE {
 	Cipher_Type_NONE,
 	Cipher_Type_WEP40,
@@ -689,14 +689,14 @@
 	Cipher_Type_CCMP,
 	Cipher_Type_WEP104
 } RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 typedef struct {
 	UCHAR Addr[MAC_ADDR_LEN];
-	UCHAR ErrorCode[2];	//00 01-Invalid authentication type
-	//00 02-Authentication timeout
-	//00 03-Challenge from AP failed
-	//00 04-Challenge to AP failed
+	UCHAR ErrorCode[2];	/*00 01-Invalid authentication type */
+	/*00 02-Authentication timeout */
+	/*00 03-Challenge from AP failed */
+	/*00 04-Challenge to AP failed */
 	BOOLEAN Reported;
 } ROGUEAP_ENTRY, *PROGUEAP_ENTRY;
 
@@ -705,23 +705,23 @@
 	ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE];
 } ROGUEAP_TABLE, *PROGUEAP_TABLE;
 
-//
-// Cisco IAPP format
-//
+/* */
+/* Cisco IAPP format */
+/* */
 typedef struct _CISCO_IAPP_CONTENT_ {
-	USHORT Length;		//IAPP Length
-	UCHAR MessageType;	//IAPP type
-	UCHAR FunctionCode;	//IAPP function type
+	USHORT Length;		/*IAPP Length */
+	UCHAR MessageType;	/*IAPP type */
+	UCHAR FunctionCode;	/*IAPP function type */
 	UCHAR DestinaionMAC[MAC_ADDR_LEN];
 	UCHAR SourceMAC[MAC_ADDR_LEN];
-	USHORT Tag;		//Tag(element IE) - Adjacent AP report
-	USHORT TagLength;	//Length of element not including 4 byte header
-	UCHAR OUI[4];		//0x00, 0x40, 0x96, 0x00
-	UCHAR PreviousAP[MAC_ADDR_LEN];	//MAC Address of access point
+	USHORT Tag;		/*Tag(element IE) - Adjacent AP report */
+	USHORT TagLength;	/*Length of element not including 4 byte header */
+	UCHAR OUI[4];		/*0x00, 0x40, 0x96, 0x00 */
+	UCHAR PreviousAP[MAC_ADDR_LEN];	/*MAC Address of access point */
 	USHORT Channel;
 	USHORT SsidLen;
 	UCHAR Ssid[MAX_LEN_OF_SSID];
-	USHORT Seconds;		//Seconds that the client has been disassociated.
+	USHORT Seconds;		/*Seconds that the client has been disassociated. */
 } CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
 
 /*
@@ -732,55 +732,55 @@
 	ULONG RxSize;
 	USHORT Sequence;
 	USHORT LastFrag;
-	ULONG Flags;		// Some extra frame information. bit 0: LLC presented
+	ULONG Flags;		/* Some extra frame information. bit 0: LLC presented */
 } FRAGMENT_FRAME, *PFRAGMENT_FRAME;
 
-//
-// Packet information for NdisQueryPacket
-//
+/* */
+/* Packet information for NdisQueryPacket */
+/* */
 typedef struct _PACKET_INFO {
-	UINT PhysicalBufferCount;	// Physical breaks of buffer descripor chained
-	UINT BufferCount;	// Number of Buffer descriptor chained
-	UINT TotalPacketLength;	// Self explained
-	PNDIS_BUFFER pFirstBuffer;	// Pointer to first buffer descriptor
+	UINT PhysicalBufferCount;	/* Physical breaks of buffer descripor chained */
+	UINT BufferCount;	/* Number of Buffer descriptor chained */
+	UINT TotalPacketLength;	/* Self explained */
+	PNDIS_BUFFER pFirstBuffer;	/* Pointer to first buffer descriptor */
 } PACKET_INFO, *PPACKET_INFO;
 
-//
-//  Arcfour Structure Added by PaulWu
-//
+/* */
+/*  Arcfour Structure Added by PaulWu */
+/* */
 typedef struct _ARCFOUR {
 	UINT X;
 	UINT Y;
 	UCHAR STATE[256];
 } ARCFOURCONTEXT, *PARCFOURCONTEXT;
 
-//
-// Tkip Key structure which RC4 key & MIC calculation
-//
+/* */
+/* Tkip Key structure which RC4 key & MIC calculation */
+/* */
 typedef struct _TKIP_KEY_INFO {
-	UINT nBytesInM;		// # bytes in M for MICKEY
+	UINT nBytesInM;		/* # bytes in M for MICKEY */
 	ULONG IV16;
 	ULONG IV32;
-	ULONG K0;		// for MICKEY Low
-	ULONG K1;		// for MICKEY Hig
-	ULONG L;		// Current state for MICKEY
-	ULONG R;		// Current state for MICKEY
-	ULONG M;		// Message accumulator for MICKEY
+	ULONG K0;		/* for MICKEY Low */
+	ULONG K1;		/* for MICKEY Hig */
+	ULONG L;		/* Current state for MICKEY */
+	ULONG R;		/* Current state for MICKEY */
+	ULONG M;		/* Message accumulator for MICKEY */
 	UCHAR RC4KEY[16];
 	UCHAR MIC[8];
 } TKIP_KEY_INFO, *PTKIP_KEY_INFO;
 
-//
-// Private / Misc data, counters for driver internal use
-//
+/* */
+/* Private / Misc data, counters for driver internal use */
+/* */
 typedef struct __PRIVATE_STRUC {
-	UINT SystemResetCnt;	// System reset counter
-	UINT TxRingFullCnt;	// Tx ring full occurrance number
-	UINT PhyRxErrCnt;	// PHY Rx error count, for debug purpose, might move to global counter
-	// Variables for WEP encryption / decryption in rtmp_wep.c
+	UINT SystemResetCnt;	/* System reset counter */
+	UINT TxRingFullCnt;	/* Tx ring full occurrance number */
+	UINT PhyRxErrCnt;	/* PHY Rx error count, for debug purpose, might move to global counter */
+	/* Variables for WEP encryption / decryption in rtmp_wep.c */
 	UINT FCSCRC32;
 	ARCFOURCONTEXT WEPCONTEXT;
-	// Tkip stuff
+	/* Tkip stuff */
 	TKIP_KEY_INFO Tx;
 	TKIP_KEY_INFO Rx;
 } PRIVATE_STRUC, *PPRIVATE_STRUC;
@@ -788,19 +788,19 @@
 /***************************************************************************
   *	Channel and BBP related data structures
   **************************************************************************/
-// structure to tune BBP R66 (BBP TUNING)
+/* structure to tune BBP R66 (BBP TUNING) */
 typedef struct _BBP_R66_TUNING {
 	BOOLEAN bEnable;
-	USHORT FalseCcaLowerThreshold;	// default 100
-	USHORT FalseCcaUpperThreshold;	// default 512
+	USHORT FalseCcaLowerThreshold;	/* default 100 */
+	USHORT FalseCcaUpperThreshold;	/* default 512 */
 	UCHAR R66Delta;
 	UCHAR R66CurrentValue;
-	BOOLEAN R66LowerUpperSelect;	//Before LinkUp, Used LowerBound or UpperBound as R66 value.
+	BOOLEAN R66LowerUpperSelect;	/*Before LinkUp, Used LowerBound or UpperBound as R66 value. */
 } BBP_R66_TUNING, *PBBP_R66_TUNING;
 
-// structure to store channel TX power
+/* structure to store channel TX power */
 typedef struct _CHANNEL_TX_POWER {
-	USHORT RemainingTimeForUse;	//unit: sec
+	USHORT RemainingTimeForUse;	/*unit: sec */
 	UCHAR Channel;
 	CHAR Power;
 	CHAR Power2;
@@ -808,26 +808,26 @@
 	UCHAR DfsReq;
 } CHANNEL_TX_POWER, *PCHANNEL_TX_POWER;
 
-// structure to store 802.11j channel TX power
+/* structure to store 802.11j channel TX power */
 typedef struct _CHANNEL_11J_TX_POWER {
 	UCHAR Channel;
-	UCHAR BW;		// BW_10 or BW_20
+	UCHAR BW;		/* BW_10 or BW_20 */
 	CHAR Power;
 	CHAR Power2;
-	USHORT RemainingTimeForUse;	//unit: sec
+	USHORT RemainingTimeForUse;	/*unit: sec */
 } CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
 
 typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
-	UCHAR EvaluatePeriod;	// 0:not evalute status, 1: evaluate status, 2: switching status
+	UCHAR EvaluatePeriod;	/* 0:not evalute status, 1: evaluate status, 2: switching status */
 	UCHAR EvaluateStableCnt;
-	UCHAR Pair1PrimaryRxAnt;	// 0:Ant-E1, 1:Ant-E2
-	UCHAR Pair1SecondaryRxAnt;	// 0:Ant-E1, 1:Ant-E2
-	UCHAR Pair2PrimaryRxAnt;	// 0:Ant-E3, 1:Ant-E4
-	UCHAR Pair2SecondaryRxAnt;	// 0:Ant-E3, 1:Ant-E4
-	SHORT Pair1AvgRssi[2];	// AvgRssi[0]:E1, AvgRssi[1]:E2
-	SHORT Pair2AvgRssi[2];	// AvgRssi[0]:E3, AvgRssi[1]:E4
-	SHORT Pair1LastAvgRssi;	//
-	SHORT Pair2LastAvgRssi;	//
+	UCHAR Pair1PrimaryRxAnt;	/* 0:Ant-E1, 1:Ant-E2 */
+	UCHAR Pair1SecondaryRxAnt;	/* 0:Ant-E1, 1:Ant-E2 */
+	UCHAR Pair2PrimaryRxAnt;	/* 0:Ant-E3, 1:Ant-E4 */
+	UCHAR Pair2SecondaryRxAnt;	/* 0:Ant-E3, 1:Ant-E4 */
+	SHORT Pair1AvgRssi[2];	/* AvgRssi[0]:E1, AvgRssi[1]:E2 */
+	SHORT Pair2AvgRssi[2];	/* AvgRssi[0]:E3, AvgRssi[1]:E4 */
+	SHORT Pair1LastAvgRssi;	/* */
+	SHORT Pair2LastAvgRssi;	/* */
 	ULONG RcvPktNumWhenEvaluate;
 	BOOLEAN FirstPktArrivedWhenEvaluate;
 	RALINK_TIMER_STRUCT RxAntDiversityTimer;
@@ -837,19 +837,19 @@
   *	structure for radar detection and channel switch
   **************************************************************************/
 typedef struct _RADAR_DETECT_STRUCT {
-	//BOOLEAN           IEEE80211H;                     // 0: disable, 1: enable IEEE802.11h
-	UCHAR CSCount;		//Channel switch counter
-	UCHAR CSPeriod;		//Channel switch period (beacon count)
-	UCHAR RDCount;		//Radar detection counter
-	UCHAR RDMode;		//Radar Detection mode
-	UCHAR RDDurRegion;	//Radar detection duration region
+	/*BOOLEAN           IEEE80211H;                     // 0: disable, 1: enable IEEE802.11h */
+	UCHAR CSCount;		/*Channel switch counter */
+	UCHAR CSPeriod;		/*Channel switch period (beacon count) */
+	UCHAR RDCount;		/*Radar detection counter */
+	UCHAR RDMode;		/*Radar Detection mode */
+	UCHAR RDDurRegion;	/*Radar detection duration region */
 	UCHAR BBPR16;
 	UCHAR BBPR17;
 	UCHAR BBPR18;
 	UCHAR BBPR21;
 	UCHAR BBPR22;
 	UCHAR BBPR64;
-	ULONG InServiceMonitorCount;	// unit: sec
+	ULONG InServiceMonitorCount;	/* unit: sec */
 	UINT8 DfsSessionTime;
 	BOOLEAN bFastDfs;
 	UINT8 ChMovingTime;
@@ -863,25 +863,25 @@
 } ABGBAND_STATE;
 
 #ifdef RTMP_MAC_PCI
-// Power save method control
+/* Power save method control */
 typedef union _PS_CONTROL {
 	struct {
-		ULONG EnablePSinIdle:1;	// Enable radio off when not connect to AP. radio on only when sitesurvey,
-		ULONG EnableNewPS:1;	// Enable new  Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe.
-		ULONG rt30xxPowerMode:2;	// Power Level Mode for rt30xx chip
-		ULONG rt30xxFollowHostASPM:1;	// Card Follows Host's setting for rt30xx chip.
-		ULONG rt30xxForceASPMTest:1;	// Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode.
-		ULONG rsv:26;	// Radio Measurement Enable
+		ULONG EnablePSinIdle:1;	/* Enable radio off when not connect to AP. radio on only when sitesurvey, */
+		ULONG EnableNewPS:1;	/* Enable new  Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */
+		ULONG rt30xxPowerMode:2;	/* Power Level Mode for rt30xx chip */
+		ULONG rt30xxFollowHostASPM:1;	/* Card Follows Host's setting for rt30xx chip. */
+		ULONG rt30xxForceASPMTest:1;	/* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */
+		ULONG rsv:26;	/* Radio Measurement Enable */
 	} field;
 	ULONG word;
 } PS_CONTROL, *PPS_CONTROL;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 /***************************************************************************
   *	structure for MLME state machine
   **************************************************************************/
 typedef struct _MLME_STRUCT {
-	// STA state machines
+	/* STA state machines */
 	STATE_MACHINE CntlMachine;
 	STATE_MACHINE AssocMachine;
 	STATE_MACHINE AuthMachine;
@@ -894,15 +894,15 @@
 	STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE];
 	STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE];
 	STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE];
-	// Action
+	/* Action */
 	STATE_MACHINE ActMachine;
 
-	// common WPA state machine
+	/* common WPA state machine */
 	STATE_MACHINE WpaMachine;
 	STATE_MACHINE_FUNC WpaFunc[WPA_FUNC_SIZE];
 
-	ULONG ChannelQuality;	// 0..100, Channel Quality Indication for Roaming
-	ULONG Now32;		// latch the value of NdisGetSystemUpTime()
+	ULONG ChannelQuality;	/* 0..100, Channel Quality Indication for Roaming */
+	ULONG Now32;		/* latch the value of NdisGetSystemUpTime() */
 	ULONG LastSendNULLpsmTime;
 
 	BOOLEAN bRunning;
@@ -919,7 +919,7 @@
 	UCHAR bPsPollTimerRunning;
 	RALINK_TIMER_STRUCT PsPollTimer;
 	RALINK_TIMER_STRUCT RadioOnOffTimer;
-#endif				// RTMP_MAC_PCI //
+#endif				/* RTMP_MAC_PCI // */
 	ULONG PeriodicRound;
 	ULONG OneSecPeriodicRound;
 
@@ -931,12 +931,12 @@
 #ifdef RT30xx
 	UCHAR CaliBW40RfR24;
 	UCHAR CaliBW20RfR24;
-#endif				// RT30xx //
+#endif				/* RT30xx // */
 
 #ifdef RTMP_MAC_USB
 	RALINK_TIMER_STRUCT AutoWakeupTimer;
 	BOOLEAN AutoWakeupTimerRunning;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 } MLME_STRUCT, *PMLME_STRUCT;
 
 /***************************************************************************
@@ -979,7 +979,7 @@
 	UCHAR TID;
 	UCHAR BAWinSize;
 	UCHAR Token;
-// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header.
+/* Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. */
 	USHORT Sequence;
 	USHORT TimeOutValue;
 	ORI_BLOCKACK_STATUS ORI_BA_Status;
@@ -990,47 +990,47 @@
 typedef struct _BA_REC_ENTRY {
 	UCHAR Wcid;
 	UCHAR TID;
-	UCHAR BAWinSize;	// 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
-	//UCHAR NumOfRxPkt;
-	//UCHAR    Curindidx; // the head in the RX reordering buffer
+	UCHAR BAWinSize;	/* 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. */
+	/*UCHAR NumOfRxPkt; */
+	/*UCHAR    Curindidx; // the head in the RX reordering buffer */
 	USHORT LastIndSeq;
-//      USHORT          LastIndSeqAtTimer;
+/*      USHORT          LastIndSeqAtTimer; */
 	USHORT TimeOutValue;
 	RALINK_TIMER_STRUCT RECBATimer;
 	ULONG LastIndSeqAtTimer;
 	ULONG nDropPacket;
 	ULONG rcvSeq;
 	REC_BLOCKACK_STATUS REC_BA_Status;
-//      UCHAR   RxBufIdxUsed;
-	// corresponding virtual address for RX reordering packet storage.
-	//RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF];
-	NDIS_SPIN_LOCK RxReRingLock;	// Rx Ring spinlock
-//      struct _BA_REC_ENTRY *pNext;
+/*      UCHAR   RxBufIdxUsed; */
+	/* corresponding virtual address for RX reordering packet storage. */
+	/*RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; */
+	NDIS_SPIN_LOCK RxReRingLock;	/* Rx Ring spinlock */
+/*      struct _BA_REC_ENTRY *pNext; */
 	PVOID pAdapter;
 	struct reordering_list list;
 } BA_REC_ENTRY, *PBA_REC_ENTRY;
 
 typedef struct {
-	ULONG numAsRecipient;	// I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
-	ULONG numAsOriginator;	// I am originator of   numAsOriginator clients. These clients are in the BAOriEntry[]
-	ULONG numDoneOriginator;	// count Done Originator sessions
+	ULONG numAsRecipient;	/* I am recipient of numAsRecipient clients. These client are in the BARecEntry[] */
+	ULONG numAsOriginator;	/* I am originator of   numAsOriginator clients. These clients are in the BAOriEntry[] */
+	ULONG numDoneOriginator;	/* count Done Originator sessions */
 	BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
 	BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
 } BA_TABLE, *PBA_TABLE;
 
-//For QureyBATableOID use;
+/*For QureyBATableOID use; */
 typedef struct PACKED _OID_BA_REC_ENTRY {
 	UCHAR MACAddr[MAC_ADDR_LEN];
-	UCHAR BaBitmap;		// if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize
+	UCHAR BaBitmap;		/* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize */
 	UCHAR rsv;
 	UCHAR BufSize[8];
 	REC_BLOCKACK_STATUS REC_BA_Status[8];
 } OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY;
 
-//For QureyBATableOID use;
+/*For QureyBATableOID use; */
 typedef struct PACKED _OID_BA_ORI_ENTRY {
 	UCHAR MACAddr[MAC_ADDR_LEN];
-	UCHAR BaBitmap;		// if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status
+	UCHAR BaBitmap;		/* if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status */
 	UCHAR rsv;
 	UCHAR BufSize[8];
 	ORI_BLOCKACK_STATUS ORI_BA_Status[8];
@@ -1039,22 +1039,22 @@
 typedef struct _QUERYBA_TABLE {
 	OID_BA_ORI_ENTRY BAOriEntry[32];
 	OID_BA_REC_ENTRY BARecEntry[32];
-	UCHAR OriNum;		// Number of below BAOriEntry
-	UCHAR RecNum;		// Number of below BARecEntry
+	UCHAR OriNum;		/* Number of below BAOriEntry */
+	UCHAR RecNum;		/* Number of below BARecEntry */
 } QUERYBA_TABLE, *PQUERYBA_TABLE;
 
 typedef union _BACAP_STRUC {
 	struct {
 		UINT32 RxBAWinLimit:8;
 		UINT32 TxBAWinLimit:8;
-		UINT32 AutoBA:1;	// automatically BA
-		UINT32 Policy:2;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use
+		UINT32 AutoBA:1;	/* automatically BA */
+		UINT32 Policy:2;	/* 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use */
 		UINT32 MpduDensity:3;
-		UINT32 AmsduEnable:1;	//Enable AMSDU transmisstion
-		UINT32 AmsduSize:1;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]        = { 3839, 7935};
-		UINT32 MMPSmode:2;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		UINT32 bHtAdhoc:1;	// adhoc can use ht rate.
-		UINT32 b2040CoexistScanSup:1;	//As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
+		UINT32 AmsduEnable:1;	/*Enable AMSDU transmisstion */
+		UINT32 AmsduSize:1;	/* 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]        = { 3839, 7935}; */
+		UINT32 MMPSmode:2;	/* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */
+		UINT32 bHtAdhoc:1;	/* adhoc can use ht rate. */
+		UINT32 b2040CoexistScanSup:1;	/*As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz. */
 		 UINT32:4;
 	} field;
 	UINT32 word;
@@ -1066,7 +1066,7 @@
 	UCHAR TID;
 	UCHAR nMSDU;
 	USHORT TimeOut;
-	BOOLEAN bAllTid;	// If True, delete all TID for BA sessions with this MACaddr.
+	BOOLEAN bAllTid;	/* If True, delete all TID for BA sessions with this MACaddr. */
 } OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
 
 #define IS_HT_STA(_pMacEntry)	\
@@ -1078,11 +1078,11 @@
 #define PEER_IS_HT_RATE(_pMacEntry)	\
 	(_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
 
-//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second.  (Details see MLMEPeriodic)
+/*This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second.  (Details see MLMEPeriodic) */
 typedef struct _IOT_STRUC {
 	UCHAR Threshold[2];
-	UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[0]
-	UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE];	// compare with threshold[1]
+	UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE];	/* compare with threshold[0] */
+	UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE];	/* compare with threshold[1] */
 	ULONG OneSecInWindowCount;
 	ULONG OneSecFrameDuplicateCount;
 	ULONG OneSecOutWindowCount;
@@ -1098,16 +1098,16 @@
 	BOOLEAN bToggle;
 } IOT_STRUC, *PIOT_STRUC;
 
-// This is the registry setting for 802.11n transmit setting.  Used in advanced page.
+/* This is the registry setting for 802.11n transmit setting.  Used in advanced page. */
 typedef union _REG_TRANSMIT_SETTING {
 	struct {
-		//UINT32  PhyMode:4;
-		//UINT32  MCS:7;                 // MCS
+		/*UINT32  PhyMode:4; */
+		/*UINT32  MCS:7;                 // MCS */
 		UINT32 rsv0:10;
 		UINT32 TxBF:1;
-		UINT32 BW:1;	//channel bandwidth 20MHz or 40 MHz
+		UINT32 BW:1;	/*channel bandwidth 20MHz or 40 MHz */
 		UINT32 ShortGI:1;
-		UINT32 STBC:1;	//SPACE
+		UINT32 STBC:1;	/*SPACE */
 		UINT32 TRANSNO:2;
 		UINT32 HTMODE:1;
 		UINT32 EXTCHA:2;
@@ -1118,9 +1118,9 @@
 
 typedef union _DESIRED_TRANSMIT_SETTING {
 	struct {
-		USHORT MCS:7;	// MCS
+		USHORT MCS:7;	/* MCS */
 		USHORT PhyMode:4;
-		USHORT FixedTxMode:2;	// If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
+		USHORT FixedTxMode:2;	/* If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. */
 		USHORT rsv:3;
 	} field;
 	USHORT word;
@@ -1136,11 +1136,11 @@
 	UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
 	ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
 	ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
-	BOOLEAN EnableBeacon;	// trigger to enable beacon transmission.
-	UCHAR BeaconBitMap;	// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-	UCHAR DtimBitOn;	// NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+	BOOLEAN EnableBeacon;	/* trigger to enable beacon transmission. */
+	UCHAR BeaconBitMap;	/* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
+	UCHAR DtimBitOn;	/* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */
 } BEACON_SYNC_STRUCT;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 /***************************************************************************
   *	Multiple SSID related data structures
@@ -1168,39 +1168,39 @@
 		UCHAR bit_offset = wcid & 0x7; \
 		ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
 
-// configuration common to OPMODE_AP as well as OPMODE_STA
+/* configuration common to OPMODE_AP as well as OPMODE_STA */
 typedef struct _COMMON_CONFIG {
 
 	BOOLEAN bCountryFlag;
 	UCHAR CountryCode[3];
 	UCHAR Geography;
-	UCHAR CountryRegion;	// Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel
-	UCHAR CountryRegionForABand;	// Enum of country region for A band
-	UCHAR PhyMode;		// PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
-	USHORT Dsifs;		// in units of usec
-	ULONG PacketFilter;	// Packet filter for receiving
+	UCHAR CountryRegion;	/* Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel */
+	UCHAR CountryRegionForABand;	/* Enum of country region for A band */
+	UCHAR PhyMode;		/* PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED */
+	USHORT Dsifs;		/* in units of usec */
+	ULONG PacketFilter;	/* Packet filter for receiving */
 	UINT8 RegulatoryClass;
 
-	CHAR Ssid[MAX_LEN_OF_SSID];	// NOT NULL-terminated
-	UCHAR SsidLen;		// the actual ssid length in used
-	UCHAR LastSsidLen;	// the actual ssid length in used
-	CHAR LastSsid[MAX_LEN_OF_SSID];	// NOT NULL-terminated
+	CHAR Ssid[MAX_LEN_OF_SSID];	/* NOT NULL-terminated */
+	UCHAR SsidLen;		/* the actual ssid length in used */
+	UCHAR LastSsidLen;	/* the actual ssid length in used */
+	CHAR LastSsid[MAX_LEN_OF_SSID];	/* NOT NULL-terminated */
 	UCHAR LastBssid[MAC_ADDR_LEN];
 
 	UCHAR Bssid[MAC_ADDR_LEN];
 	USHORT BeaconPeriod;
 	UCHAR Channel;
-	UCHAR CentralChannel;	// Central Channel when using 40MHz is indicating. not real channel.
+	UCHAR CentralChannel;	/* Central Channel when using 40MHz is indicating. not real channel. */
 
 	UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR SupRateLen;
 	UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR ExtRateLen;
-	UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES];	// OID_802_11_DESIRED_RATES
+	UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES];	/* OID_802_11_DESIRED_RATES */
 	UCHAR MaxDesiredRate;
 	UCHAR ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES];
 
-	ULONG BasicRateBitmap;	// backup basic ratebitmap
+	ULONG BasicRateBitmap;	/* backup basic ratebitmap */
 
 	BOOLEAN bAPSDCapable;
 	BOOLEAN bInServicePeriod;
@@ -1216,83 +1216,83 @@
 	BOOLEAN bACMAPSDTr[4];	/* no use */
 
 	BOOLEAN bNeedSendTriggerFrame;
-	BOOLEAN bAPSDForcePowerSave;	// Force power save mode, should only use in APSD-STAUT
+	BOOLEAN bAPSDForcePowerSave;	/* Force power save mode, should only use in APSD-STAUT */
 	ULONG TriggerTimerCount;
 	UCHAR MaxSPLength;
-	UCHAR BBPCurrentBW;	// BW_10,       BW_20, BW_40
-	// move to MULTISSID_STRUCT for MBSS
-	//HTTRANSMIT_SETTING    HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-	REG_TRANSMIT_SETTING RegTransmitSetting;	//registry transmit setting. this is for reading registry setting only. not useful.
-	//UCHAR       FixedTxMode;              // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode
-	UCHAR TxRate;		// Same value to fill in TXD. TxRate is 6-bit
-	UCHAR MaxTxRate;	// RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR TxRateIndex;	// Tx rate index in RateSwitchTable
-	UCHAR TxRateTableSize;	// Valid Tx rate table size in RateSwitchTable
-	//BOOLEAN               bAutoTxRateSwitch;
-	UCHAR MinTxRate;	// RATE_1, RATE_2, RATE_5_5, RATE_11
-	UCHAR RtsRate;		// RATE_xxx
-	HTTRANSMIT_SETTING MlmeTransmit;	// MGMT frame PHY rate setting when operatin at Ht rate.
-	UCHAR MlmeRate;		// RATE_xxx, used to send MLME frames
-	UCHAR BasicMlmeRate;	// Default Rate for sending MLME frames
+	UCHAR BBPCurrentBW;	/* BW_10,       BW_20, BW_40 */
+	/* move to MULTISSID_STRUCT for MBSS */
+	/*HTTRANSMIT_SETTING    HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. */
+	REG_TRANSMIT_SETTING RegTransmitSetting;	/*registry transmit setting. this is for reading registry setting only. not useful. */
+	/*UCHAR       FixedTxMode;              // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode */
+	UCHAR TxRate;		/* Same value to fill in TXD. TxRate is 6-bit */
+	UCHAR MaxTxRate;	/* RATE_1, RATE_2, RATE_5_5, RATE_11 */
+	UCHAR TxRateIndex;	/* Tx rate index in RateSwitchTable */
+	UCHAR TxRateTableSize;	/* Valid Tx rate table size in RateSwitchTable */
+	/*BOOLEAN               bAutoTxRateSwitch; */
+	UCHAR MinTxRate;	/* RATE_1, RATE_2, RATE_5_5, RATE_11 */
+	UCHAR RtsRate;		/* RATE_xxx */
+	HTTRANSMIT_SETTING MlmeTransmit;	/* MGMT frame PHY rate setting when operatin at Ht rate. */
+	UCHAR MlmeRate;		/* RATE_xxx, used to send MLME frames */
+	UCHAR BasicMlmeRate;	/* Default Rate for sending MLME frames */
 
-	USHORT RtsThreshold;	// in unit of BYTE
-	USHORT FragmentThreshold;	// in unit of BYTE
+	USHORT RtsThreshold;	/* in unit of BYTE */
+	USHORT FragmentThreshold;	/* in unit of BYTE */
 
-	UCHAR TxPower;		// in unit of mW
-	ULONG TxPowerPercentage;	// 0~100 %
-	ULONG TxPowerDefault;	// keep for TxPowerPercentage
+	UCHAR TxPower;		/* in unit of mW */
+	ULONG TxPowerPercentage;	/* 0~100 % */
+	ULONG TxPowerDefault;	/* keep for TxPowerPercentage */
 	UINT8 PwrConstraint;
 
-	BACAP_STRUC BACapability;	//   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
-	BACAP_STRUC REGBACapability;	//   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0
+	BACAP_STRUC BACapability;	/*   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0 */
+	BACAP_STRUC REGBACapability;	/*   NO USE = 0XFF  ;  IMMED_BA =1  ;  DELAY_BA=0 */
 
-	IOT_STRUC IOTestParm;	// 802.11n InterOpbility Test Parameter;
-	ULONG TxPreamble;	// Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
-	BOOLEAN bUseZeroToDisableFragment;	// Microsoft use 0 as disable
-	ULONG UseBGProtection;	// 0: auto, 1: always use, 2: always not use
-	BOOLEAN bUseShortSlotTime;	// 0: disable, 1 - use short slot (9us)
-	BOOLEAN bEnableTxBurst;	// 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST
-	BOOLEAN bAggregationCapable;	// 1: enable TX aggregation when the peer supports it
-	BOOLEAN bPiggyBackCapable;	// 1: enable TX piggy-back according MAC's version
-	BOOLEAN bIEEE80211H;	// 1: enable IEEE802.11h spec.
-	ULONG DisableOLBCDetect;	// 0: enable OLBC detect; 1 disable OLBC detect
+	IOT_STRUC IOTestParm;	/* 802.11n InterOpbility Test Parameter; */
+	ULONG TxPreamble;	/* Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto */
+	BOOLEAN bUseZeroToDisableFragment;	/* Microsoft use 0 as disable */
+	ULONG UseBGProtection;	/* 0: auto, 1: always use, 2: always not use */
+	BOOLEAN bUseShortSlotTime;	/* 0: disable, 1 - use short slot (9us) */
+	BOOLEAN bEnableTxBurst;	/* 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST */
+	BOOLEAN bAggregationCapable;	/* 1: enable TX aggregation when the peer supports it */
+	BOOLEAN bPiggyBackCapable;	/* 1: enable TX piggy-back according MAC's version */
+	BOOLEAN bIEEE80211H;	/* 1: enable IEEE802.11h spec. */
+	ULONG DisableOLBCDetect;	/* 0: enable OLBC detect; 1 disable OLBC detect */
 
 	BOOLEAN bRdg;
 
-	BOOLEAN bWmmCapable;	// 0:disable WMM, 1:enable WMM
-	QOS_CAPABILITY_PARM APQosCapability;	// QOS capability of the current associated AP
-	EDCA_PARM APEdcaParm;	// EDCA parameters of the current associated AP
-	QBSS_LOAD_PARM APQbssLoad;	// QBSS load of the current associated AP
-	UCHAR AckPolicy[4];	// ACK policy of the specified AC. see ACK_xxx
-	BOOLEAN bDLSCapable;	// 0:disable DLS, 1:enable DLS
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition
+	BOOLEAN bWmmCapable;	/* 0:disable WMM, 1:enable WMM */
+	QOS_CAPABILITY_PARM APQosCapability;	/* QOS capability of the current associated AP */
+	EDCA_PARM APEdcaParm;	/* EDCA parameters of the current associated AP */
+	QBSS_LOAD_PARM APQbssLoad;	/* QBSS load of the current associated AP */
+	UCHAR AckPolicy[4];	/* ACK policy of the specified AC. see ACK_xxx */
+	BOOLEAN bDLSCapable;	/* 0:disable DLS, 1:enable DLS */
+	/* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */
+	/* BOOLEAN control, either ON or OFF. These flags should always be accessed via */
+	/* OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. */
+	/* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition */
 	ULONG OpStatusFlags;
 
-	BOOLEAN NdisRadioStateOff;	//For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
-	ABGBAND_STATE BandState;	// For setting BBP used on B/G or A mode.
+	BOOLEAN NdisRadioStateOff;	/*For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. */
+	ABGBAND_STATE BandState;	/* For setting BBP used on B/G or A mode. */
 
-	// IEEE802.11H--DFS.
+	/* IEEE802.11H--DFS. */
 	RADAR_DETECT_STRUCT RadarDetect;
 
-	// HT
-	UCHAR BASize;		// USer desired BAWindowSize. Should not exceed our max capability
-	//RT_HT_CAPABILITY      SupportedHtPhy;
+	/* HT */
+	UCHAR BASize;		/* USer desired BAWindowSize. Should not exceed our max capability */
+	/*RT_HT_CAPABILITY      SupportedHtPhy; */
 	RT_HT_CAPABILITY DesiredHtPhy;
 	HT_CAPABILITY_IE HtCapability;
-	ADD_HT_INFO_IE AddHTInfo;	// Useful as AP.
-	//This IE is used with channel switch announcement element when changing to a new 40MHz.
-	//This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
-	NEW_EXT_CHAN_IE NewExtChanOffset;	//7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
+	ADD_HT_INFO_IE AddHTInfo;	/* Useful as AP. */
+	/*This IE is used with channel switch announcement element when changing to a new 40MHz. */
+	/*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */
+	NEW_EXT_CHAN_IE NewExtChanOffset;	/*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */
 
 	BOOLEAN bHTProtect;
 	BOOLEAN bMIMOPSEnable;
 	BOOLEAN bBADecline;
-//2008/11/05: KH add to support Antenna power-saving of AP<--
+/*2008/11/05: KH add to support Antenna power-saving of AP<-- */
 	BOOLEAN bGreenAPEnable;
-//2008/11/05: KH add to support Antenna power-saving of AP-->
+/*2008/11/05: KH add to support Antenna power-saving of AP--> */
 	BOOLEAN bDisableReordering;
 	BOOLEAN bForty_Mhz_Intolerant;
 	BOOLEAN bExtChannelSwitchAnnouncement;
@@ -1301,19 +1301,19 @@
 
 	UCHAR TxBASize;
 
-	// Enable wireless event
+	/* Enable wireless event */
 	BOOLEAN bWirelessEvent;
-	BOOLEAN bWiFiTest;	// Enable this parameter for WiFi test
+	BOOLEAN bWiFiTest;	/* Enable this parameter for WiFi test */
 
-	// Tx & Rx Stream number selection
+	/* Tx & Rx Stream number selection */
 	UCHAR TxStream;
 	UCHAR RxStream;
 
-	BOOLEAN bHardwareRadio;	// Hardware controlled Radio enabled
+	BOOLEAN bHardwareRadio;	/* Hardware controlled Radio enabled */
 
 #ifdef RTMP_MAC_USB
-	BOOLEAN bMultipleIRP;	// Multiple Bulk IN flag
-	UCHAR NumOfBulkInIRP;	// if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
+	BOOLEAN bMultipleIRP;	/* Multiple Bulk IN flag */
+	UCHAR NumOfBulkInIRP;	/* if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 */
 	RT_HT_CAPABILITY SupportedHtPhy;
 	ULONG MaxPktOneTxBulk;
 	UCHAR TxBulkFactor;
@@ -1325,7 +1325,7 @@
 	UINT32 BeaconAdjust;
 	UINT32 BeaconFactor;
 	UINT32 BeaconRemain;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
 	NDIS_SPIN_LOCK MeasureReqTabLock;
 	PMEASURE_REQ_TAB pMeasureReqTab;
@@ -1333,10 +1333,10 @@
 	NDIS_SPIN_LOCK TpcReqTabLock;
 	PTPC_REQ_TAB pTpcReqTab;
 
-	BOOLEAN PSPXlink;	// 0: Disable. 1: Enable
+	BOOLEAN PSPXlink;	/* 0: Disable. 1: Enable */
 
 #if defined(RT305x)||defined(RT30xx)
-	// request by Gary, for High Power issue
+	/* request by Gary, for High Power issue */
 	UCHAR HighPowerPatchDisabled;
 #endif
 
@@ -1344,33 +1344,33 @@
 } COMMON_CONFIG, *PCOMMON_CONFIG;
 
 /* Modified by Wu Xi-Kun 4/21/2006 */
-// STA configuration and status
+/* STA configuration and status */
 typedef struct _STA_ADMIN_CONFIG {
-	// GROUP 1 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, but not necessary fully equal to the final
-	//   settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either
-	//   AP or IBSS holder).
-	//   Once initialized, user configuration can only be changed via OID_xxx
-	UCHAR BssType;		// BSS_INFRA or BSS_ADHOC
-	USHORT AtimWin;		// used when starting a new IBSS
+	/* GROUP 1 - */
+	/*   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
+	/*   the user intended configuration, but not necessary fully equal to the final */
+	/*   settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */
+	/*   AP or IBSS holder). */
+	/*   Once initialized, user configuration can only be changed via OID_xxx */
+	UCHAR BssType;		/* BSS_INFRA or BSS_ADHOC */
+	USHORT AtimWin;		/* used when starting a new IBSS */
 
-	// GROUP 2 -
-	//   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
-	//   the user intended configuration, and should be always applied to the final
-	//   settings in ACTIVE BSS without compromising with the BSS holder.
-	//   Once initialized, user configuration can only be changed via OID_xxx
+	/* GROUP 2 - */
+	/*   User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */
+	/*   the user intended configuration, and should be always applied to the final */
+	/*   settings in ACTIVE BSS without compromising with the BSS holder. */
+	/*   Once initialized, user configuration can only be changed via OID_xxx */
 	UCHAR RssiTrigger;
-	UCHAR RssiTriggerMode;	// RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD
-	USHORT DefaultListenCount;	// default listen count;
-	ULONG WindowsPowerMode;	// Power mode for AC power
-	ULONG WindowsBatteryPowerMode;	// Power mode for battery if exists
-	BOOLEAN bWindowsACCAMEnable;	// Enable CAM power mode when AC on
-	BOOLEAN bAutoReconnect;	// Set to TRUE when setting OID_802_11_SSID with no matching BSSID
-	ULONG WindowsPowerProfile;	// Windows power profile, for NDIS5.1 PnP
+	UCHAR RssiTriggerMode;	/* RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD */
+	USHORT DefaultListenCount;	/* default listen count; */
+	ULONG WindowsPowerMode;	/* Power mode for AC power */
+	ULONG WindowsBatteryPowerMode;	/* Power mode for battery if exists */
+	BOOLEAN bWindowsACCAMEnable;	/* Enable CAM power mode when AC on */
+	BOOLEAN bAutoReconnect;	/* Set to TRUE when setting OID_802_11_SSID with no matching BSSID */
+	ULONG WindowsPowerProfile;	/* Windows power profile, for NDIS5.1 PnP */
 
-	// MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1)
-	USHORT Psm;		// power management mode   (PWR_ACTIVE|PWR_SAVE)
+	/* MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) */
+	USHORT Psm;		/* power management mode   (PWR_ACTIVE|PWR_SAVE) */
 	USHORT DisassocReason;
 	UCHAR DisassocSta[MAC_ADDR_LEN];
 	USHORT DeauthReason;
@@ -1378,109 +1378,109 @@
 	USHORT AuthFailReason;
 	UCHAR AuthFailSta[MAC_ADDR_LEN];
 
-	NDIS_802_11_PRIVACY_FILTER PrivacyFilter;	// PrivacyFilter enum for 802.1X
-	NDIS_802_11_AUTHENTICATION_MODE AuthMode;	// This should match to whatever microsoft defined
+	NDIS_802_11_PRIVACY_FILTER PrivacyFilter;	/* PrivacyFilter enum for 802.1X */
+	NDIS_802_11_AUTHENTICATION_MODE AuthMode;	/* This should match to whatever microsoft defined */
 	NDIS_802_11_WEP_STATUS WepStatus;
-	NDIS_802_11_WEP_STATUS OrigWepStatus;	// Original wep status set from OID
+	NDIS_802_11_WEP_STATUS OrigWepStatus;	/* Original wep status set from OID */
 
-	// Add to support different cipher suite for WPA2/WPA mode
-	NDIS_802_11_ENCRYPTION_STATUS GroupCipher;	// Multicast cipher suite
-	NDIS_802_11_ENCRYPTION_STATUS PairCipher;	// Unicast cipher suite
-	BOOLEAN bMixCipher;	// Indicate current Pair & Group use different cipher suites
+	/* Add to support different cipher suite for WPA2/WPA mode */
+	NDIS_802_11_ENCRYPTION_STATUS GroupCipher;	/* Multicast cipher suite */
+	NDIS_802_11_ENCRYPTION_STATUS PairCipher;	/* Unicast cipher suite */
+	BOOLEAN bMixCipher;	/* Indicate current Pair & Group use different cipher suites */
 	USHORT RsnCapability;
 
 	NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
 
-	UCHAR WpaPassPhrase[64];	// WPA PSK pass phrase
-	UINT WpaPassPhraseLen;	// the length of WPA PSK pass phrase
-	UCHAR PMK[32];		// WPA PSK mode PMK
-	UCHAR PTK[64];		// WPA PSK mode PTK
-	UCHAR GTK[32];		// GTK from authenticator
+	UCHAR WpaPassPhrase[64];	/* WPA PSK pass phrase */
+	UINT WpaPassPhraseLen;	/* the length of WPA PSK pass phrase */
+	UCHAR PMK[32];		/* WPA PSK mode PMK */
+	UCHAR PTK[64];		/* WPA PSK mode PTK */
+	UCHAR GTK[32];		/* GTK from authenticator */
 	BSSID_INFO SavedPMK[PMKID_NO];
-	UINT SavedPMKNum;	// Saved PMKID number
+	UINT SavedPMKNum;	/* Saved PMKID number */
 
 	UCHAR DefaultKeyId;
 
-	// WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
+	/* WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED */
 	UCHAR PortSecured;
 
-	// For WPA countermeasures
-	ULONG LastMicErrorTime;	// record last MIC error time
-	ULONG MicErrCnt;	// Should be 0, 1, 2, then reset to zero (after disassoiciation).
-	BOOLEAN bBlockAssoc;	// Block associate attempt for 60 seconds after counter measure occurred.
-	// For WPA-PSK supplicant state
-	WPA_STATE WpaState;	// Default is SS_NOTUSE and handled by microsoft 802.1x
+	/* For WPA countermeasures */
+	ULONG LastMicErrorTime;	/* record last MIC error time */
+	ULONG MicErrCnt;	/* Should be 0, 1, 2, then reset to zero (after disassoiciation). */
+	BOOLEAN bBlockAssoc;	/* Block associate attempt for 60 seconds after counter measure occurred. */
+	/* For WPA-PSK supplicant state */
+	WPA_STATE WpaState;	/* Default is SS_NOTUSE and handled by microsoft 802.1x */
 	UCHAR ReplayCounter[8];
-	UCHAR ANonce[32];	// ANonce for WPA-PSK from aurhenticator
-	UCHAR SNonce[32];	// SNonce for WPA-PSK
+	UCHAR ANonce[32];	/* ANonce for WPA-PSK from aurhenticator */
+	UCHAR SNonce[32];	/* SNonce for WPA-PSK */
 
-	UCHAR LastSNR0;		// last received BEACON's SNR
-	UCHAR LastSNR1;		// last received BEACON's SNR for 2nd  antenna
+	UCHAR LastSNR0;		/* last received BEACON's SNR */
+	UCHAR LastSNR1;		/* last received BEACON's SNR for 2nd  antenna */
 	RSSI_SAMPLE RssiSample;
 	ULONG NumOfAvgRssiSample;
 
-	ULONG LastBeaconRxTime;	// OS's timestamp of the last BEACON RX time
-	ULONG Last11bBeaconRxTime;	// OS's timestamp of the last 11B BEACON RX time
-	ULONG Last11gBeaconRxTime;	// OS's timestamp of the last 11G BEACON RX time
-	ULONG Last20NBeaconRxTime;	// OS's timestamp of the last 20MHz N BEACON RX time
+	ULONG LastBeaconRxTime;	/* OS's timestamp of the last BEACON RX time */
+	ULONG Last11bBeaconRxTime;	/* OS's timestamp of the last 11B BEACON RX time */
+	ULONG Last11gBeaconRxTime;	/* OS's timestamp of the last 11G BEACON RX time */
+	ULONG Last20NBeaconRxTime;	/* OS's timestamp of the last 20MHz N BEACON RX time */
 
-	ULONG LastScanTime;	// Record last scan time for issue BSSID_SCAN_LIST
-	ULONG ScanCnt;		// Scan counts since most recent SSID, BSSID, SCAN OID request
-	BOOLEAN bSwRadio;	// Software controlled Radio On/Off, TRUE: On
-	BOOLEAN bHwRadio;	// Hardware controlled Radio On/Off, TRUE: On
-	BOOLEAN bRadio;		// Radio state, And of Sw & Hw radio state
-	BOOLEAN bHardwareRadio;	// Hardware controlled Radio enabled
-	BOOLEAN bShowHiddenSSID;	// Show all known SSID in SSID list get operation
+	ULONG LastScanTime;	/* Record last scan time for issue BSSID_SCAN_LIST */
+	ULONG ScanCnt;		/* Scan counts since most recent SSID, BSSID, SCAN OID request */
+	BOOLEAN bSwRadio;	/* Software controlled Radio On/Off, TRUE: On */
+	BOOLEAN bHwRadio;	/* Hardware controlled Radio On/Off, TRUE: On */
+	BOOLEAN bRadio;		/* Radio state, And of Sw & Hw radio state */
+	BOOLEAN bHardwareRadio;	/* Hardware controlled Radio enabled */
+	BOOLEAN bShowHiddenSSID;	/* Show all known SSID in SSID list get operation */
 
-	// New for WPA, windows want us to keep association information and
-	// Fixed IEs from last association response
+	/* New for WPA, windows want us to keep association information and */
+	/* Fixed IEs from last association response */
 	NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
-	USHORT ReqVarIELen;	// Length of next VIE include EID & Length
-	UCHAR ReqVarIEs[MAX_VIE_LEN];	// The content saved here should be little-endian format.
-	USHORT ResVarIELen;	// Length of next VIE include EID & Length
+	USHORT ReqVarIELen;	/* Length of next VIE include EID & Length */
+	UCHAR ReqVarIEs[MAX_VIE_LEN];	/* The content saved here should be little-endian format. */
+	USHORT ResVarIELen;	/* Length of next VIE include EID & Length */
 	UCHAR ResVarIEs[MAX_VIE_LEN];
 
 	UCHAR RSNIE_Len;
-	UCHAR RSN_IE[MAX_LEN_OF_RSNIE];	// The content saved here should be little-endian format.
+	UCHAR RSN_IE[MAX_LEN_OF_RSNIE];	/* The content saved here should be little-endian format. */
 
-	ULONG CLBusyBytes;	// Save the total bytes received durning channel load scan time
-	USHORT RPIDensity[8];	// Array for RPI density collection
+	ULONG CLBusyBytes;	/* Save the total bytes received durning channel load scan time */
+	USHORT RPIDensity[8];	/* Array for RPI density collection */
 
-	UCHAR RMReqCnt;		// Number of measurement request saved.
-	UCHAR CurrentRMReqIdx;	// Number of measurement request saved.
-	BOOLEAN ParallelReq;	// Parallel measurement, only one request performed,
-	// It must be the same channel with maximum duration
-	USHORT ParallelDuration;	// Maximum duration for parallel measurement
-	UCHAR ParallelChannel;	// Only one channel with parallel measurement
-	USHORT IAPPToken;	// IAPP dialog token
-	// Hack for channel load and noise histogram parameters
-	UCHAR NHFactor;		// Parameter for Noise histogram
-	UCHAR CLFactor;		// Parameter for channel load
+	UCHAR RMReqCnt;		/* Number of measurement request saved. */
+	UCHAR CurrentRMReqIdx;	/* Number of measurement request saved. */
+	BOOLEAN ParallelReq;	/* Parallel measurement, only one request performed, */
+	/* It must be the same channel with maximum duration */
+	USHORT ParallelDuration;	/* Maximum duration for parallel measurement */
+	UCHAR ParallelChannel;	/* Only one channel with parallel measurement */
+	USHORT IAPPToken;	/* IAPP dialog token */
+	/* Hack for channel load and noise histogram parameters */
+	UCHAR NHFactor;		/* Parameter for Noise histogram */
+	UCHAR CLFactor;		/* Parameter for channel load */
 
 	RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer;
 	BOOLEAN StaQuickResponeForRateUpTimerRunning;
 
-	UCHAR DtimCount;	// 0.. DtimPeriod-1
-	UCHAR DtimPeriod;	// default = 3
+	UCHAR DtimCount;	/* 0.. DtimPeriod-1 */
+	UCHAR DtimPeriod;	/* default = 3 */
 
-	////////////////////////////////////////////////////////////////////////////////////////
-	// This is only for WHQL test.
+	/*////////////////////////////////////////////////////////////////////////////////////// */
+	/* This is only for WHQL test. */
 	BOOLEAN WhqlTest;
-	////////////////////////////////////////////////////////////////////////////////////////
+	/*////////////////////////////////////////////////////////////////////////////////////// */
 
 	RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
-	// Fast Roaming
-	BOOLEAN bAutoRoaming;	// 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI
-	CHAR dBmToRoam;		// the condition to roam when receiving Rssi less than this value. It's negative value.
+	/* Fast Roaming */
+	BOOLEAN bAutoRoaming;	/* 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI */
+	CHAR dBmToRoam;		/* the condition to roam when receiving Rssi less than this value. It's negative value. */
 
 	BOOLEAN IEEE8021X;
 	BOOLEAN IEEE8021x_required_keys;
-	CIPHER_KEY DesireSharedKey[4];	// Record user desired WEP keys
+	CIPHER_KEY DesireSharedKey[4];	/* Record user desired WEP keys */
 	UCHAR DesireSharedKeyId;
 
-	// 0: driver ignores wpa_supplicant
-	// 1: wpa_supplicant initiates scanning and AP selection
-	// 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
+	/* 0: driver ignores wpa_supplicant */
+	/* 1: wpa_supplicant initiates scanning and AP selection */
+	/* 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters */
 	UCHAR WpaSupplicantUP;
 	UCHAR WpaSupplicantScanCount;
 	BOOLEAN bRSN_IE_FromWpaSupplicant;
@@ -1491,63 +1491,63 @@
 	BOOLEAN bTGnWifiTest;
 	BOOLEAN bScanReqIsFromWebUI;
 
-	HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;	// For transmit phy setting in TXWI.
+	HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;	/* For transmit phy setting in TXWI. */
 	DESIRED_TRANSMIT_SETTING DesiredTransmitSetting;
 	RT_HT_PHY_INFO DesiredHtPhyInfo;
 	BOOLEAN bAutoTxRateSwitch;
 
 #ifdef RTMP_MAC_PCI
 	UCHAR BBPR3;
-	// PS Control has 2 meanings for advanced power save function.
-	// 1. EnablePSinIdle : When no connection, always radio off except need to do site survey.
-	// 2. EnableNewPS  : will save more current in sleep or radio off mode.
+	/* PS Control has 2 meanings for advanced power save function. */
+	/* 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. */
+	/* 2. EnableNewPS  : will save more current in sleep or radio off mode. */
 	PS_CONTROL PSControl;
-#endif				// RTMP_MAC_PCI //
+#endif				/* RTMP_MAC_PCI // */
 
 	BOOLEAN bAutoConnectByBssid;
-	ULONG BeaconLostTime;	// seconds
-	BOOLEAN bForceTxBurst;	// 1: force enble TX PACKET BURST, 0: disable
+	ULONG BeaconLostTime;	/* seconds */
+	BOOLEAN bForceTxBurst;	/* 1: force enble TX PACKET BURST, 0: disable */
 } STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
 
-// This data structure keep the current active BSS/IBSS's configuration that this STA
-// had agreed upon joining the network. Which means these parameters are usually decided
-// by the BSS/IBSS creator instead of user configuration. Data in this data structurre
-// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE.
-// Normally, after SCAN or failed roaming attempts, we need to recover back to
-// the current active settings.
+/* This data structure keep the current active BSS/IBSS's configuration that this STA */
+/* had agreed upon joining the network. Which means these parameters are usually decided */
+/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */
+/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */
+/* Normally, after SCAN or failed roaming attempts, we need to recover back to */
+/* the current active settings. */
 typedef struct _STA_ACTIVE_CONFIG {
 	USHORT Aid;
-	USHORT AtimWin;		// in kusec; IBSS parameter set element
+	USHORT AtimWin;		/* in kusec; IBSS parameter set element */
 	USHORT CapabilityInfo;
 	USHORT CfpMaxDuration;
 	USHORT CfpPeriod;
 
-	// Copy supported rate from desired AP's beacon. We are trying to match
-	// AP's supported and extended rate settings.
+	/* Copy supported rate from desired AP's beacon. We are trying to match */
+	/* AP's supported and extended rate settings. */
 	UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
 	UCHAR SupRateLen;
 	UCHAR ExtRateLen;
-	// Copy supported ht from desired AP's beacon. We are trying to match
+	/* Copy supported ht from desired AP's beacon. We are trying to match */
 	RT_HT_PHY_INFO SupportedPhyInfo;
 	RT_HT_CAPABILITY SupportedHtPhy;
 } STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
 
 typedef struct _MAC_TABLE_ENTRY {
-	//Choose 1 from ValidAsWDS and ValidAsCLI  to validize.
-	BOOLEAN ValidAsCLI;	// Sta mode, set this TRUE after Linkup,too.
-	BOOLEAN ValidAsWDS;	// This is WDS Entry. only for AP mode.
-	BOOLEAN ValidAsApCli;	//This is a AP-Client entry, only for AP mode which enable AP-Client functions.
+	/*Choose 1 from ValidAsWDS and ValidAsCLI  to validize. */
+	BOOLEAN ValidAsCLI;	/* Sta mode, set this TRUE after Linkup,too. */
+	BOOLEAN ValidAsWDS;	/* This is WDS Entry. only for AP mode. */
+	BOOLEAN ValidAsApCli;	/*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */
 	BOOLEAN ValidAsMesh;
-	BOOLEAN ValidAsDls;	// This is DLS Entry. only for STA mode.
+	BOOLEAN ValidAsDls;	/* This is DLS Entry. only for STA mode. */
 	BOOLEAN isCached;
-	BOOLEAN bIAmBadAtheros;	// Flag if this is Atheros chip that has IOT problem.  We need to turn on RTS/CTS protection.
+	BOOLEAN bIAmBadAtheros;	/* Flag if this is Atheros chip that has IOT problem.  We need to turn on RTS/CTS protection. */
 
-	UCHAR EnqueueEapolStartTimerRunning;	// Enqueue EAPoL-Start for triggering EAP SM
-	//jan for wpa
-	// record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB
+	UCHAR EnqueueEapolStartTimerRunning;	/* Enqueue EAPoL-Start for triggering EAP SM */
+	/*jan for wpa */
+	/* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */
 	UCHAR CMTimerRunning;
-	UCHAR apidx;		// MBSS number
+	UCHAR apidx;		/* MBSS number */
 	UCHAR RSNIE_Len;
 	UCHAR RSN_IE[MAX_LEN_OF_RSNIE];
 	UCHAR ANonce[LEN_KEY_DESC_NONCE];
@@ -1556,14 +1556,14 @@
 	UCHAR PTK[64];
 	UCHAR ReTryCounter;
 	RALINK_TIMER_STRUCT RetryTimer;
-	RALINK_TIMER_STRUCT EnqueueStartForPSKTimer;	// A timer which enqueue EAPoL-Start for triggering PSK SM
-	NDIS_802_11_AUTHENTICATION_MODE AuthMode;	// This should match to whatever microsoft defined
+	RALINK_TIMER_STRUCT EnqueueStartForPSKTimer;	/* A timer which enqueue EAPoL-Start for triggering PSK SM */
+	NDIS_802_11_AUTHENTICATION_MODE AuthMode;	/* This should match to whatever microsoft defined */
 	NDIS_802_11_WEP_STATUS WepStatus;
 	NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
 	AP_WPA_STATE WpaState;
 	GTK_STATE GTKState;
 	USHORT PortSecured;
-	NDIS_802_11_PRIVACY_FILTER PrivacyFilter;	// PrivacyFilter enum for 802.1X
+	NDIS_802_11_PRIVACY_FILTER PrivacyFilter;	/* PrivacyFilter enum for 802.1X */
 	CIPHER_KEY PairwiseKey;
 	PVOID pAd;
 	INT PMKID_CacheIdx;
@@ -1572,75 +1572,75 @@
 	UCHAR Addr[MAC_ADDR_LEN];
 	UCHAR PsMode;
 	SST Sst;
-	AUTH_STATE AuthState;	// for SHARED KEY authentication state machine used only
-	BOOLEAN IsReassocSta;	// Indicate whether this is a reassociation procedure
+	AUTH_STATE AuthState;	/* for SHARED KEY authentication state machine used only */
+	BOOLEAN IsReassocSta;	/* Indicate whether this is a reassociation procedure */
 	USHORT Aid;
 	USHORT CapabilityInfo;
 	UCHAR LastRssi;
 	ULONG NoDataIdleCount;
-	UINT16 StationKeepAliveCount;	// unit: second
+	UINT16 StationKeepAliveCount;	/* unit: second */
 	ULONG PsQIdleCount;
 	QUEUE_HEADER PsQueue;
 
-	UINT32 StaConnectTime;	// the live time of this station since associated with AP
+	UINT32 StaConnectTime;	/* the live time of this station since associated with AP */
 
 	BOOLEAN bSendBAR;
 	USHORT NoBADataCountDown;
 
-	UINT32 CachedBuf[16];	// UINT (4 bytes) for alignment
-	UINT TxBFCount;		// 3*3
+	UINT32 CachedBuf[16];	/* UINT (4 bytes) for alignment */
+	UINT TxBFCount;		/* 3*3 */
 	UINT FIFOCount;
 	UINT DebugFIFOCount;
 	UINT DebugTxCount;
 	BOOLEAN bDlsInit;
 
-//====================================================
-//WDS entry needs these
-// if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
+/*==================================================== */
+/*WDS entry needs these */
+/* if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab */
 	UINT MatchWDSTabIdx;
 	UCHAR MaxSupportedRate;
 	UCHAR CurrTxRate;
 	UCHAR CurrTxRateIndex;
-	// to record the each TX rate's quality. 0 is best, the bigger the worse.
+	/* to record the each TX rate's quality. 0 is best, the bigger the worse. */
 	USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
-//      USHORT          OneSecTxOkCount;
+/*      USHORT          OneSecTxOkCount; */
 	UINT32 OneSecTxNoRetryOkCount;
 	UINT32 OneSecTxRetryOkCount;
 	UINT32 OneSecTxFailCount;
 	UINT32 ContinueTxFailCnt;
-	UINT32 CurrTxRateStableTime;	// # of second in current TX rate
-	UCHAR TxRateUpPenalty;	// extra # of second penalty due to last unstable condition
-//====================================================
+	UINT32 CurrTxRateStableTime;	/* # of second in current TX rate */
+	UCHAR TxRateUpPenalty;	/* extra # of second penalty due to last unstable condition */
+/*==================================================== */
 
 	BOOLEAN fNoisyEnvironment;
 	BOOLEAN fLastSecAccordingRSSI;
-	UCHAR LastSecTxRateChangeAction;	// 0: no change, 1:rate UP, 2:rate down
-	CHAR LastTimeTxRateChangeAction;	//Keep last time value of LastSecTxRateChangeAction
+	UCHAR LastSecTxRateChangeAction;	/* 0: no change, 1:rate UP, 2:rate down */
+	CHAR LastTimeTxRateChangeAction;	/*Keep last time value of LastSecTxRateChangeAction */
 	ULONG LastTxOkCount;
 	UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
 
-	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
-	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
-	// CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros.
-	// see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
+	/* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */
+	/* BOOLEAN control, either ON or OFF. These flags should always be accessed via */
+	/* CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. */
+	/* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED */
 	ULONG ClientStatusFlags;
 
-	HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;	// For transmit phy setting in TXWI.
+	HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;	/* For transmit phy setting in TXWI. */
 
-	// HT EWC MIMO-N used parameters
-	USHORT RXBAbitmap;	// fill to on-chip  RXWI_BA_BITMASK in 8.1.3RX attribute entry format
-	USHORT TXBAbitmap;	// This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
+	/* HT EWC MIMO-N used parameters */
+	USHORT RXBAbitmap;	/* fill to on-chip  RXWI_BA_BITMASK in 8.1.3RX attribute entry format */
+	USHORT TXBAbitmap;	/* This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI */
 	USHORT TXAutoBAbitmap;
 	USHORT BADeclineBitmap;
-	USHORT BARecWcidArray[NUM_OF_TID];	// The mapping wcid of recipient session. if RXBAbitmap bit is masked
-	USHORT BAOriWcidArray[NUM_OF_TID];	// The mapping wcid of originator session. if TXBAbitmap bit is masked
-	USHORT BAOriSequence[NUM_OF_TID];	// The mapping wcid of originator session. if TXBAbitmap bit is masked
+	USHORT BARecWcidArray[NUM_OF_TID];	/* The mapping wcid of recipient session. if RXBAbitmap bit is masked */
+	USHORT BAOriWcidArray[NUM_OF_TID];	/* The mapping wcid of originator session. if TXBAbitmap bit is masked */
+	USHORT BAOriSequence[NUM_OF_TID];	/* The mapping wcid of originator session. if TXBAbitmap bit is masked */
 
-	// 802.11n features.
+	/* 802.11n features. */
 	UCHAR MpduDensity;
 	UCHAR MaxRAmpduFactor;
 	UCHAR AMsduSize;
-	UCHAR MmpsMode;		// MIMO power save more.
+	UCHAR MmpsMode;		/* MIMO power save more. */
 
 	HT_CAPABILITY_IE HTCapability;
 
@@ -1670,16 +1670,16 @@
 	QUEUE_HEADER McastPsQueue;
 	ULONG PsQIdleCount;
 	BOOLEAN fAnyStationInPsm;
-	BOOLEAN fAnyStationBadAtheros;	// Check if any Station is atheros 802.11n Chip.  We need to use RTS/CTS with Atheros 802,.11n chip.
-	BOOLEAN fAnyTxOPForceDisable;	// Check if it is necessary to disable BE TxOP
-	BOOLEAN fAllStationAsRalink;	// Check if all stations are ralink-chipset
-	BOOLEAN fAnyStationIsLegacy;	// Check if I use legacy rate to transmit to my BSS Station/
-	BOOLEAN fAnyStationNonGF;	// Check if any Station can't support GF.
-	BOOLEAN fAnyStation20Only;	// Check if any Station can't support GF.
-	BOOLEAN fAnyStationMIMOPSDynamic;	// Check if any Station is MIMO Dynamic
-	BOOLEAN fAnyBASession;	// Check if there is BA session.  Force turn on RTS/CTS
-//2008/10/28: KH add to support Antenna power-saving of AP<--
-//2008/10/28: KH add to support Antenna power-saving of AP-->
+	BOOLEAN fAnyStationBadAtheros;	/* Check if any Station is atheros 802.11n Chip.  We need to use RTS/CTS with Atheros 802,.11n chip. */
+	BOOLEAN fAnyTxOPForceDisable;	/* Check if it is necessary to disable BE TxOP */
+	BOOLEAN fAllStationAsRalink;	/* Check if all stations are ralink-chipset */
+	BOOLEAN fAnyStationIsLegacy;	/* Check if I use legacy rate to transmit to my BSS Station/ */
+	BOOLEAN fAnyStationNonGF;	/* Check if any Station can't support GF. */
+	BOOLEAN fAnyStation20Only;	/* Check if any Station can't support GF. */
+	BOOLEAN fAnyStationMIMOPSDynamic;	/* Check if any Station is MIMO Dynamic */
+	BOOLEAN fAnyBASession;	/* Check if there is BA session.  Force turn on RTS/CTS */
+/*2008/10/28: KH add to support Antenna power-saving of AP<-- */
+/*2008/10/28: KH add to support Antenna power-saving of AP--> */
 } MAC_TABLE, *PMAC_TABLE;
 
 struct wificonf {
@@ -1711,11 +1711,11 @@
 	void (*AsicHaltAction) (RTMP_ADAPTER * pAd);
 };
 
-//
-//  The miniport adapter structure
-//
+/* */
+/*  The miniport adapter structure */
+/* */
 struct _RTMP_ADAPTER {
-	PVOID OS_Cookie;	// save specific structure relative to OS
+	PVOID OS_Cookie;	/* save specific structure relative to OS */
 	PNET_DEV net_dev;
 	ULONG VirtualIfCnt;
 
@@ -1726,7 +1726,7 @@
 /*****************************************************************************************/
 /*      PCI related parameters																  */
 /*****************************************************************************************/
-	PUCHAR CSRBaseAddress;	// PCI MMIO Base Address, all access will use
+	PUCHAR CSRBaseAddress;	/* PCI MMIO Base Address, all access will use */
 	unsigned int irq_num;
 
 	USHORT LnkCtrlBitMask;
@@ -1735,26 +1735,26 @@
 	USHORT HostLnkCtrlConfiguration;
 	USHORT HostLnkCtrlOffset;
 	USHORT PCIePowerSaveLevel;
-	ULONG Rt3xxHostLinkCtrl;	// USed for 3090F chip
-	ULONG Rt3xxRalinkLinkCtrl;	// USed for 3090F chip
-	USHORT DeviceID;	// Read from PCI config
+	ULONG Rt3xxHostLinkCtrl;	/* USed for 3090F chip */
+	ULONG Rt3xxRalinkLinkCtrl;	/* USed for 3090F chip */
+	USHORT DeviceID;	/* Read from PCI config */
 	ULONG AccessBBPFailCount;
-	BOOLEAN bPCIclkOff;	// flag that indicate if the PICE power status in Configuration SPace..
-	BOOLEAN bPCIclkOffDisableTx;	//
+	BOOLEAN bPCIclkOff;	/* flag that indicate if the PICE power status in Configuration SPace.. */
+	BOOLEAN bPCIclkOffDisableTx;	/* */
 
-	BOOLEAN brt30xxBanMcuCmd;	//when = 0xff means all commands are ok to set .
-	BOOLEAN b3090ESpecialChip;	//3090E special chip that write EEPROM 0x24=0x9280.
-	ULONG CheckDmaBusyCount;	// Check Interrupt Status Register Count.
+	BOOLEAN brt30xxBanMcuCmd;	/*when = 0xff means all commands are ok to set . */
+	BOOLEAN b3090ESpecialChip;	/*3090E special chip that write EEPROM 0x24=0x9280. */
+	ULONG CheckDmaBusyCount;	/* Check Interrupt Status Register Count. */
 
 	UINT int_enable_reg;
 	UINT int_disable_mask;
 	UINT int_pending;
 
-	RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING];	// Shared memory of all 1st pre-allocated TxBuf associated with each TXD
-	RTMP_DMABUF RxDescRing;	// Shared memory for RX descriptors
-	RTMP_DMABUF TxDescRing[NUM_OF_TX_RING];	// Shared memory for Tx descriptors
-	RTMP_TX_RING TxRing[NUM_OF_TX_RING];	// AC0~4 + HCCA
-#endif				// RTMP_MAC_PCI //
+	RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING];	/* Shared memory of all 1st pre-allocated TxBuf associated with each TXD */
+	RTMP_DMABUF RxDescRing;	/* Shared memory for RX descriptors */
+	RTMP_DMABUF TxDescRing[NUM_OF_TX_RING];	/* Shared memory for Tx descriptors */
+	RTMP_TX_RING TxRing[NUM_OF_TX_RING];	/* AC0~4 + HCCA */
+#endif				/* RTMP_MAC_PCI // */
 
 	NDIS_SPIN_LOCK irq_lock;
 	UCHAR irq_disabled;
@@ -1764,28 +1764,28 @@
 /*      USB related parameters                                                           */
 /*****************************************************************************************/
 	struct usb_config_descriptor *config;
-	UINT BulkInEpAddr;	// bulk-in endpoint address
-	UINT BulkOutEpAddr[6];	// bulk-out endpoint address
+	UINT BulkInEpAddr;	/* bulk-in endpoint address */
+	UINT BulkOutEpAddr[6];	/* bulk-out endpoint address */
 
 	UINT NumberOfPipes;
 	USHORT BulkOutMaxPacketSize;
 	USHORT BulkInMaxPacketSize;
 
-	//======Control Flags
+	/*======Control Flags */
 	LONG PendingIoCount;
 	ULONG BulkFlags;
-	BOOLEAN bUsbTxBulkAggre;	// Flags for bulk out data priority
+	BOOLEAN bUsbTxBulkAggre;	/* Flags for bulk out data priority */
 
-	//======Cmd Thread
+	/*======Cmd Thread */
 	CmdQ CmdQ;
-	NDIS_SPIN_LOCK CmdQLock;	// CmdQLock spinlock
+	NDIS_SPIN_LOCK CmdQLock;	/* CmdQLock spinlock */
 	RTMP_OS_TASK cmdQTask;
 
-	//======Semaphores (event)
+	/*======Semaphores (event) */
 	RTMP_OS_SEM UsbVendorReq_semaphore;
 	PVOID UsbVendorReqBuf;
 	wait_queue_head_t *wait;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
 /*****************************************************************************************/
 /*      RBUS related parameters																  */
@@ -1794,7 +1794,7 @@
 /*****************************************************************************************/
 /*      Both PCI/USB related parameters														  */
 /*****************************************************************************************/
-	//RTMP_DEV_INFO                 chipInfo;
+	/*RTMP_DEV_INFO                 chipInfo; */
 	RTMP_INF_TYPE infType;
 
 /*****************************************************************************************/
@@ -1802,42 +1802,42 @@
 /*****************************************************************************************/
 	RTMP_OS_TASK mlmeTask;
 #ifdef RTMP_TIMER_TASK_SUPPORT
-	// If you want use timer task to handle the timer related jobs, enable this.
+	/* If you want use timer task to handle the timer related jobs, enable this. */
 	RTMP_TIMER_TASK_QUEUE TimerQ;
 	NDIS_SPIN_LOCK TimerQLock;
 	RTMP_OS_TASK timerTask;
-#endif				// RTMP_TIMER_TASK_SUPPORT //
+#endif				/* RTMP_TIMER_TASK_SUPPORT // */
 
 /*****************************************************************************************/
 /*      Tx related parameters                                                           */
 /*****************************************************************************************/
-	BOOLEAN DeQueueRunning[NUM_OF_TX_RING];	// for ensuring RTUSBDeQueuePacket get call once
+	BOOLEAN DeQueueRunning[NUM_OF_TX_RING];	/* for ensuring RTUSBDeQueuePacket get call once */
 	NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING];
 
 #ifdef RTMP_MAC_USB
-	// Data related context and AC specified, 4 AC supported
-	NDIS_SPIN_LOCK BulkOutLock[6];	// BulkOut spinlock for 4 ACs
-	NDIS_SPIN_LOCK MLMEBulkOutLock;	// MLME BulkOut lock
+	/* Data related context and AC specified, 4 AC supported */
+	NDIS_SPIN_LOCK BulkOutLock[6];	/* BulkOut spinlock for 4 ACs */
+	NDIS_SPIN_LOCK MLMEBulkOutLock;	/* MLME BulkOut lock */
 
 	HT_TX_CONTEXT TxContext[NUM_OF_TX_RING];
-	NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING];	// TxContextQueue spinlock
+	NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING];	/* TxContextQueue spinlock */
 
-	// 4 sets of Bulk Out index and pending flag
-	UCHAR NextBulkOutIndex[4];	// only used for 4 EDCA bulkout pipe
+	/* 4 sets of Bulk Out index and pending flag */
+	UCHAR NextBulkOutIndex[4];	/* only used for 4 EDCA bulkout pipe */
 
-	BOOLEAN BulkOutPending[6];	// used for total 6 bulkout pipe
+	BOOLEAN BulkOutPending[6];	/* used for total 6 bulkout pipe */
 	UCHAR bulkResetPipeid;
 	BOOLEAN MgmtBulkPending;
 	ULONG bulkResetReq[6];
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
-	// resource for software backlog queues
-	QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING];	// 4 AC + 1 HCCA
-	NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING];	// TxSwQueue spinlock
+	/* resource for software backlog queues */
+	QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING];	/* 4 AC + 1 HCCA */
+	NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING];	/* TxSwQueue spinlock */
 
-	RTMP_DMABUF MgmtDescRing;	// Shared memory for MGMT descriptors
+	RTMP_DMABUF MgmtDescRing;	/* Shared memory for MGMT descriptors */
 	RTMP_MGMT_RING MgmtRing;
-	NDIS_SPIN_LOCK MgmtRingLock;	// Prio Ring spinlock
+	NDIS_SPIN_LOCK MgmtRingLock;	/* Prio Ring spinlock */
 
 /*****************************************************************************************/
 /*      Rx related parameters                                                           */
@@ -1845,65 +1845,65 @@
 
 #ifdef RTMP_MAC_PCI
 	RTMP_RX_RING RxRing;
-	NDIS_SPIN_LOCK RxRingLock;	// Rx Ring spinlock
+	NDIS_SPIN_LOCK RxRingLock;	/* Rx Ring spinlock */
 #ifdef RT3090
-	NDIS_SPIN_LOCK McuCmdLock;	//MCU Command Queue spinlock
-#endif				// RT3090 //
-#endif				// RTMP_MAC_PCI //
+	NDIS_SPIN_LOCK McuCmdLock;	/*MCU Command Queue spinlock */
+#endif				/* RT3090 // */
+#endif				/* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
-	RX_CONTEXT RxContext[RX_RING_SIZE];	// 1 for redundant multiple IRP bulk in.
-	NDIS_SPIN_LOCK BulkInLock;	// BulkIn spinlock for 4 ACs
-	UCHAR PendingRx;	// The Maximum pending Rx value should be       RX_RING_SIZE.
-	UCHAR NextRxBulkInIndex;	// Indicate the current RxContext Index which hold by Host controller.
-	UCHAR NextRxBulkInReadIndex;	// Indicate the current RxContext Index which driver can read & process it.
-	ULONG NextRxBulkInPosition;	// Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
-	ULONG TransferBufferLength;	// current length of the packet buffer
-	ULONG ReadPosition;	// current read position in a packet buffer
-#endif				// RTMP_MAC_USB //
+	RX_CONTEXT RxContext[RX_RING_SIZE];	/* 1 for redundant multiple IRP bulk in. */
+	NDIS_SPIN_LOCK BulkInLock;	/* BulkIn spinlock for 4 ACs */
+	UCHAR PendingRx;	/* The Maximum pending Rx value should be       RX_RING_SIZE. */
+	UCHAR NextRxBulkInIndex;	/* Indicate the current RxContext Index which hold by Host controller. */
+	UCHAR NextRxBulkInReadIndex;	/* Indicate the current RxContext Index which driver can read & process it. */
+	ULONG NextRxBulkInPosition;	/* Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. */
+	ULONG TransferBufferLength;	/* current length of the packet buffer */
+	ULONG ReadPosition;	/* current read position in a packet buffer */
+#endif				/* RTMP_MAC_USB // */
 
 /*****************************************************************************************/
 /*      ASIC related parameters                                                          */
 /*****************************************************************************************/
-	UINT32 MACVersion;	// MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101)..
+	UINT32 MACVersion;	/* MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. */
 
-	// ---------------------------
-	// E2PROM
-	// ---------------------------
-	ULONG EepromVersion;	// byte 0: version, byte 1: revision, byte 2~3: unused
-	ULONG FirmwareVersion;	// byte 0: Minor version, byte 1: Major version, otherwise unused.
+	/* --------------------------- */
+	/* E2PROM */
+	/* --------------------------- */
+	ULONG EepromVersion;	/* byte 0: version, byte 1: revision, byte 2~3: unused */
+	ULONG FirmwareVersion;	/* byte 0: Minor version, byte 1: Major version, otherwise unused. */
 	USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
-	UCHAR EEPROMAddressNum;	// 93c46=6  93c66=8
+	UCHAR EEPROMAddressNum;	/* 93c46=6  93c66=8 */
 	BOOLEAN EepromAccess;
 	UCHAR EFuseTag;
 
-	// ---------------------------
-	// BBP Control
-	// ---------------------------
-	UCHAR BbpWriteLatch[140];	// record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
-	CHAR BbpRssiToDbmDelta;	// change from UCHAR to CHAR for high power
+	/* --------------------------- */
+	/* BBP Control */
+	/* --------------------------- */
+	UCHAR BbpWriteLatch[140];	/* record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID */
+	CHAR BbpRssiToDbmDelta;	/* change from UCHAR to CHAR for high power */
 	BBP_R66_TUNING BbpTuning;
 
-	// ----------------------------
-	// RFIC control
-	// ----------------------------
-	UCHAR RfIcType;		// RFIC_xxx
-	ULONG RfFreqOffset;	// Frequency offset for channel switching
-	RTMP_RF_REGS LatchRfRegs;	// latch th latest RF programming value since RF IC doesn't support READ
+	/* ---------------------------- */
+	/* RFIC control */
+	/* ---------------------------- */
+	UCHAR RfIcType;		/* RFIC_xxx */
+	ULONG RfFreqOffset;	/* Frequency offset for channel switching */
+	RTMP_RF_REGS LatchRfRegs;	/* latch th latest RF programming value since RF IC doesn't support READ */
 
-	EEPROM_ANTENNA_STRUC Antenna;	// Since ANtenna definition is different for a & g. We need to save it for future reference.
+	EEPROM_ANTENNA_STRUC Antenna;	/* Since ANtenna definition is different for a & g. We need to save it for future reference. */
 	EEPROM_NIC_CONFIG2_STRUC NicConfig2;
 
-	// This soft Rx Antenna Diversity mechanism is used only when user set
-	// RX Antenna = DIVERSITY ON
+	/* This soft Rx Antenna Diversity mechanism is used only when user set */
+	/* RX Antenna = DIVERSITY ON */
 	SOFT_RX_ANT_DIVERSITY RxAnt;
 
 	UCHAR RFProgSeq;
-	CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS];	// Store Tx power value for all channels.
-	CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS];	// list all supported channels for site survey
-	CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS];	// 802.11j channel and bw
-	CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS];	// list all supported channels for site survey
+	CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS];	/* Store Tx power value for all channels. */
+	CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS];	/* list all supported channels for site survey */
+	CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS];	/* 802.11j channel and bw */
+	CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS];	/* list all supported channels for site survey */
 
-	UCHAR ChannelListNum;	// number of channel in ChannelList[]
+	UCHAR ChannelListNum;	/* number of channel in ChannelList[] */
 	UCHAR Bbp94;
 	BOOLEAN BbpForCCK;
 	ULONG Tx20MPwrCfgABand[5];
@@ -1911,47 +1911,47 @@
 	ULONG Tx40MPwrCfgABand[5];
 	ULONG Tx40MPwrCfgGBand[5];
 
-	BOOLEAN bAutoTxAgcA;	// Enable driver auto Tx Agc control
-	UCHAR TssiRefA;		// Store Tssi reference value as 25 temperature.
-	UCHAR TssiPlusBoundaryA[5];	// Tssi boundary for increase Tx power to compensate.
-	UCHAR TssiMinusBoundaryA[5];	// Tssi boundary for decrease Tx power to compensate.
-	UCHAR TxAgcStepA;	// Store Tx TSSI delta increment / decrement value
-	CHAR TxAgcCompensateA;	// Store the compensation (TxAgcStep * (idx-1))
+	BOOLEAN bAutoTxAgcA;	/* Enable driver auto Tx Agc control */
+	UCHAR TssiRefA;		/* Store Tssi reference value as 25 temperature. */
+	UCHAR TssiPlusBoundaryA[5];	/* Tssi boundary for increase Tx power to compensate. */
+	UCHAR TssiMinusBoundaryA[5];	/* Tssi boundary for decrease Tx power to compensate. */
+	UCHAR TxAgcStepA;	/* Store Tx TSSI delta increment / decrement value */
+	CHAR TxAgcCompensateA;	/* Store the compensation (TxAgcStep * (idx-1)) */
 
-	BOOLEAN bAutoTxAgcG;	// Enable driver auto Tx Agc control
-	UCHAR TssiRefG;		// Store Tssi reference value as 25 temperature.
-	UCHAR TssiPlusBoundaryG[5];	// Tssi boundary for increase Tx power to compensate.
-	UCHAR TssiMinusBoundaryG[5];	// Tssi boundary for decrease Tx power to compensate.
-	UCHAR TxAgcStepG;	// Store Tx TSSI delta increment / decrement value
-	CHAR TxAgcCompensateG;	// Store the compensation (TxAgcStep * (idx-1))
+	BOOLEAN bAutoTxAgcG;	/* Enable driver auto Tx Agc control */
+	UCHAR TssiRefG;		/* Store Tssi reference value as 25 temperature. */
+	UCHAR TssiPlusBoundaryG[5];	/* Tssi boundary for increase Tx power to compensate. */
+	UCHAR TssiMinusBoundaryG[5];	/* Tssi boundary for decrease Tx power to compensate. */
+	UCHAR TxAgcStepG;	/* Store Tx TSSI delta increment / decrement value */
+	CHAR TxAgcCompensateG;	/* Store the compensation (TxAgcStep * (idx-1)) */
 
-	CHAR BGRssiOffset0;	// Store B/G RSSI#0 Offset value on EEPROM 0x46h
-	CHAR BGRssiOffset1;	// Store B/G RSSI#1 Offset value
-	CHAR BGRssiOffset2;	// Store B/G RSSI#2 Offset value
+	CHAR BGRssiOffset0;	/* Store B/G RSSI#0 Offset value on EEPROM 0x46h */
+	CHAR BGRssiOffset1;	/* Store B/G RSSI#1 Offset value */
+	CHAR BGRssiOffset2;	/* Store B/G RSSI#2 Offset value */
 
-	CHAR ARssiOffset0;	// Store A RSSI#0 Offset value on EEPROM 0x4Ah
-	CHAR ARssiOffset1;	// Store A RSSI#1 Offset value
-	CHAR ARssiOffset2;	// Store A RSSI#2 Offset value
+	CHAR ARssiOffset0;	/* Store A RSSI#0 Offset value on EEPROM 0x4Ah */
+	CHAR ARssiOffset1;	/* Store A RSSI#1 Offset value */
+	CHAR ARssiOffset2;	/* Store A RSSI#2 Offset value */
 
-	CHAR BLNAGain;		// Store B/G external LNA#0 value on EEPROM 0x44h
-	CHAR ALNAGain0;		// Store A external LNA#0 value for ch36~64
-	CHAR ALNAGain1;		// Store A external LNA#1 value for ch100~128
-	CHAR ALNAGain2;		// Store A external LNA#2 value for ch132~165
+	CHAR BLNAGain;		/* Store B/G external LNA#0 value on EEPROM 0x44h */
+	CHAR ALNAGain0;		/* Store A external LNA#0 value for ch36~64 */
+	CHAR ALNAGain1;		/* Store A external LNA#1 value for ch100~128 */
+	CHAR ALNAGain2;		/* Store A external LNA#2 value for ch132~165 */
 #ifdef RT30xx
-	// for 3572
+	/* for 3572 */
 	UCHAR Bbp25;
 	UCHAR Bbp26;
 
-	UCHAR TxMixerGain24G;	// Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G
+	UCHAR TxMixerGain24G;	/* Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G */
 	UCHAR TxMixerGain5G;
-#endif				// RT30xx //
-	// ----------------------------
-	// LED control
-	// ----------------------------
+#endif				/* RT30xx // */
+	/* ---------------------------- */
+	/* LED control */
+	/* ---------------------------- */
 	MCU_LEDCS_STRUC LedCntl;
-	USHORT Led1;		// read from EEPROM 0x3c
-	USHORT Led2;		// EEPROM 0x3e
-	USHORT Led3;		// EEPROM 0x40
+	USHORT Led1;		/* read from EEPROM 0x3c */
+	USHORT Led2;		/* EEPROM 0x3e */
+	USHORT Led3;		/* EEPROM 0x40 */
 	UCHAR LedIndicatorStrength;
 	UCHAR RssiSingalstrengthOffet;
 	BOOLEAN bLedOnScanning;
@@ -1960,12 +1960,12 @@
 /*****************************************************************************************/
 /*      802.11 related parameters                                                        */
 /*****************************************************************************************/
-	// outgoing BEACON frame buffer and corresponding TXD
+	/* outgoing BEACON frame buffer and corresponding TXD */
 	TXWI_STRUC BeaconTxWI;
 	PUCHAR BeaconBuf;
 	USHORT BeaconOffset[HW_BEACON_MAX_COUNT];
 
-	// pre-build PS-POLL and NULL frame upon link up. for efficiency purpose.
+	/* pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. */
 	PSPOLL_FRAME PsPollFrame;
 	HEADER_802_11 NullFrame;
 
@@ -1974,45 +1974,45 @@
 	TX_CONTEXT NullContext;
 	TX_CONTEXT PsPollContext;
 	TX_CONTEXT RTSContext;
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
-//=========AP===========
+/*=========AP=========== */
 
-//=======STA===========
-	// -----------------------------------------------
-	// STA specific configuration & operation status
-	// used only when pAd->OpMode == OPMODE_STA
-	// -----------------------------------------------
-	STA_ADMIN_CONFIG StaCfg;	// user desired settings
-	STA_ACTIVE_CONFIG StaActive;	// valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
-	CHAR nickname[IW_ESSID_MAX_SIZE + 1];	// nickname, only used in the iwconfig i/f
+/*=======STA=========== */
+	/* ----------------------------------------------- */
+	/* STA specific configuration & operation status */
+	/* used only when pAd->OpMode == OPMODE_STA */
+	/* ----------------------------------------------- */
+	STA_ADMIN_CONFIG StaCfg;	/* user desired settings */
+	STA_ACTIVE_CONFIG StaActive;	/* valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) */
+	CHAR nickname[IW_ESSID_MAX_SIZE + 1];	/* nickname, only used in the iwconfig i/f */
 	NDIS_MEDIA_STATE PreMediaState;
 
-//=======Common===========
-	// OP mode: either AP or STA
-	UCHAR OpMode;		// OPMODE_STA, OPMODE_AP
+/*=======Common=========== */
+	/* OP mode: either AP or STA */
+	UCHAR OpMode;		/* OPMODE_STA, OPMODE_AP */
 
-	NDIS_MEDIA_STATE IndicateMediaState;	// Base on Indication state, default is NdisMediaStateDisConnected
+	NDIS_MEDIA_STATE IndicateMediaState;	/* Base on Indication state, default is NdisMediaStateDisConnected */
 
 	/* MAT related parameters */
 
-	// configuration: read from Registry & E2PROM
-	BOOLEAN bLocalAdminMAC;	// Use user changed MAC
-	UCHAR PermanentAddress[MAC_ADDR_LEN];	// Factory default MAC address
-	UCHAR CurrentAddress[MAC_ADDR_LEN];	// User changed MAC address
+	/* configuration: read from Registry & E2PROM */
+	BOOLEAN bLocalAdminMAC;	/* Use user changed MAC */
+	UCHAR PermanentAddress[MAC_ADDR_LEN];	/* Factory default MAC address */
+	UCHAR CurrentAddress[MAC_ADDR_LEN];	/* User changed MAC address */
 
-	// ------------------------------------------------------
-	// common configuration to both OPMODE_STA and OPMODE_AP
-	// ------------------------------------------------------
+	/* ------------------------------------------------------ */
+	/* common configuration to both OPMODE_STA and OPMODE_AP */
+	/* ------------------------------------------------------ */
 	COMMON_CONFIG CommonCfg;
 	MLME_STRUCT Mlme;
 
-	// AP needs those vaiables for site survey feature.
-	MLME_AUX MlmeAux;	// temporary settings used during MLME state machine
-	BSS_TABLE ScanTab;	// store the latest SCAN result
+	/* AP needs those vaiables for site survey feature. */
+	MLME_AUX MlmeAux;	/* temporary settings used during MLME state machine */
+	BSS_TABLE ScanTab;	/* store the latest SCAN result */
 
-	//About MacTab, the sta driver will use #0 and #1 for multicast and AP.
-	MAC_TABLE MacTab;	// ASIC on-chip WCID entry table.  At TX, ASIC always use key according to this on-chip table.
+	/*About MacTab, the sta driver will use #0 and #1 for multicast and AP. */
+	MAC_TABLE MacTab;	/* ASIC on-chip WCID entry table.  At TX, ASIC always use key according to this on-chip table. */
 	NDIS_SPIN_LOCK MacTabLock;
 
 	BA_TABLE BATable;
@@ -2020,46 +2020,46 @@
 	NDIS_SPIN_LOCK BATabLock;
 	RALINK_TIMER_STRUCT RECBATimer;
 
-	// encryption/decryption KEY tables
-	CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4];	// STA always use SharedKey[BSS0][0..3]
+	/* encryption/decryption KEY tables */
+	CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4];	/* STA always use SharedKey[BSS0][0..3] */
 
-	// RX re-assembly buffer for fragmentation
-	FRAGMENT_FRAME FragFrame;	// Frame storage for fragment frame
+	/* RX re-assembly buffer for fragmentation */
+	FRAGMENT_FRAME FragFrame;	/* Frame storage for fragment frame */
 
-	// various Counters
-	COUNTER_802_3 Counters8023;	// 802.3 counters
-	COUNTER_802_11 WlanCounters;	// 802.11 MIB counters
-	COUNTER_RALINK RalinkCounters;	// Ralink propriety counters
-	COUNTER_DRS DrsCounters;	// counters for Dynamic TX Rate Switching
-	PRIVATE_STRUC PrivateInfo;	// Private information & counters
+	/* various Counters */
+	COUNTER_802_3 Counters8023;	/* 802.3 counters */
+	COUNTER_802_11 WlanCounters;	/* 802.11 MIB counters */
+	COUNTER_RALINK RalinkCounters;	/* Ralink propriety counters */
+	COUNTER_DRS DrsCounters;	/* counters for Dynamic TX Rate Switching */
+	PRIVATE_STRUC PrivateInfo;	/* Private information & counters */
 
-	// flags, see fRTMP_ADAPTER_xxx flags
-	ULONG Flags;		// Represent current device status
-	ULONG PSFlags;		// Power Save operation flag.
+	/* flags, see fRTMP_ADAPTER_xxx flags */
+	ULONG Flags;		/* Represent current device status */
+	ULONG PSFlags;		/* Power Save operation flag. */
 
-	// current TX sequence #
+	/* current TX sequence # */
 	USHORT Sequence;
 
-	// Control disconnect / connect event generation
-	//+++Didn't used anymore
+	/* Control disconnect / connect event generation */
+	/*+++Didn't used anymore */
 	ULONG LinkDownTime;
-	//---
+	/*--- */
 	ULONG LastRxRate;
 	ULONG LastTxRate;
-	//+++Used only for Station
-	BOOLEAN bConfigChanged;	// Config Change flag for the same SSID setting
-	//---
+	/*+++Used only for Station */
+	BOOLEAN bConfigChanged;	/* Config Change flag for the same SSID setting */
+	/*--- */
 
-	ULONG ExtraInfo;	// Extra information for displaying status
-	ULONG SystemErrorBitmap;	// b0: E2PROM version error
+	ULONG ExtraInfo;	/* Extra information for displaying status */
+	ULONG SystemErrorBitmap;	/* b0: E2PROM version error */
 
-	//+++Didn't used anymore
-	ULONG MacIcVersion;	// MAC/BBP serial interface issue solved after ver.D
-	//---
+	/*+++Didn't used anymore */
+	ULONG MacIcVersion;	/* MAC/BBP serial interface issue solved after ver.D */
+	/*--- */
 
-	// ---------------------------
-	// System event log
-	// ---------------------------
+	/* --------------------------- */
+	/* System event log */
+	/* --------------------------- */
 	RT_802_11_EVENT_TABLE EventTab;
 
 	BOOLEAN HTCEnable;
@@ -2070,64 +2070,64 @@
 #ifdef RTMP_MAC_USB
 	ULONG BulkOutDataOneSecCount;
 	ULONG BulkInDataOneSecCount;
-	ULONG BulkLastOneSecCount;	// BulkOutDataOneSecCount + BulkInDataOneSecCount
+	ULONG BulkLastOneSecCount;	/* BulkOutDataOneSecCount + BulkInDataOneSecCount */
 	ULONG watchDogRxCnt;
 	ULONG watchDogRxOverFlowCnt;
 	ULONG watchDogTxPendingCnt[NUM_OF_TX_RING];
 	INT TransferedLength[NUM_OF_TX_RING];
-#endif				// RTMP_MAC_USB //
+#endif				/* RTMP_MAC_USB // */
 
 	BOOLEAN bUpdateBcnCntDone;
-	ULONG watchDogMacDeadlock;	// prevent MAC/BBP into deadlock condition
-	// ----------------------------
-	// DEBUG paramerts
-	// ----------------------------
-	//ULONG         DebugSetting[4];
+	ULONG watchDogMacDeadlock;	/* prevent MAC/BBP into deadlock condition */
+	/* ---------------------------- */
+	/* DEBUG paramerts */
+	/* ---------------------------- */
+	/*ULONG         DebugSetting[4]; */
 	BOOLEAN bBanAllBaSetup;
 	BOOLEAN bPromiscuous;
 
-	// ----------------------------
-	// rt2860c emulation-use Parameters
-	// ----------------------------
-	//ULONG         rtsaccu[30];
-	//ULONG         ctsaccu[30];
-	//ULONG         cfendaccu[30];
-	//ULONG         bacontent[16];
-	//ULONG         rxint[RX_RING_SIZE+1];
-	//UCHAR         rcvba[60];
+	/* ---------------------------- */
+	/* rt2860c emulation-use Parameters */
+	/* ---------------------------- */
+	/*ULONG         rtsaccu[30]; */
+	/*ULONG         ctsaccu[30]; */
+	/*ULONG         cfendaccu[30]; */
+	/*ULONG         bacontent[16]; */
+	/*ULONG         rxint[RX_RING_SIZE+1]; */
+	/*UCHAR         rcvba[60]; */
 	BOOLEAN bLinkAdapt;
 	BOOLEAN bForcePrintTX;
 	BOOLEAN bForcePrintRX;
-	//BOOLEAN               bDisablescanning;               //defined in RT2870 USB
+	/*BOOLEAN               bDisablescanning;               //defined in RT2870 USB */
 	BOOLEAN bStaFifoTest;
 	BOOLEAN bProtectionTest;
 	BOOLEAN bBroadComHT;
-	//+++Following add from RT2870 USB.
+	/*+++Following add from RT2870 USB. */
 	ULONG BulkOutReq;
 	ULONG BulkOutComplete;
 	ULONG BulkOutCompleteOther;
-	ULONG BulkOutCompleteCancel;	// seems not use now?
+	ULONG BulkOutCompleteCancel;	/* seems not use now? */
 	ULONG BulkInReq;
 	ULONG BulkInComplete;
 	ULONG BulkInCompleteFail;
-	//---
+	/*--- */
 
 	struct wificonf WIFItestbed;
 
 	struct reordering_mpdu_pool mpdu_blk_pool;
 
-	ULONG OneSecondnonBEpackets;	// record non BE packets per second
+	ULONG OneSecondnonBEpackets;	/* record non BE packets per second */
 
 #ifdef LINUX
 	struct iw_statistics iw_stats;
 
 	struct net_device_stats stats;
-#endif				// LINUX //
+#endif				/* LINUX // */
 
 	ULONG TbttTickCount;
 #ifdef PCI_MSI_SUPPORT
 	BOOLEAN HaveMsi;
-#endif				// PCI_MSI_SUPPORT //
+#endif				/* PCI_MSI_SUPPORT // */
 
 	UCHAR is_on;
 
@@ -2143,30 +2143,30 @@
 #ifdef RTMP_EFUSE_SUPPORT
 	BOOLEAN bUseEfuse;
 	UCHAR EEPROMImage[1024];
-#endif				// RTMP_EFUSE_SUPPORT //
-#endif				// RT30xx //
+#endif				/* RTMP_EFUSE_SUPPORT // */
+#endif				/* RT30xx // */
 };
 
 #define DELAYINTMASK		0x0003fffb
 #define INTMASK				0x0003fffb
 #define IndMask				0x0003fffc
-#define RxINT				0x00000005	// Delayed Rx or indivi rx
-#define TxDataInt			0x000000fa	// Delayed Tx or indivi tx
-#define TxMgmtInt			0x00000102	// Delayed Tx or indivi tx
-#define TxCoherent			0x00020000	// tx coherent
-#define RxCoherent			0x00010000	// rx coherent
-#define McuCommand			0x00000200	// mcu
-#define PreTBTTInt			0x00001000	// Pre-TBTT interrupt
-#define TBTTInt				0x00000800	// TBTT interrupt
-#define GPTimeOutInt			0x00008000	// GPtimeout interrupt
-#define AutoWakeupInt		0x00004000	// AutoWakeupInt interrupt
-#define FifoStaFullInt			0x00002000	//  fifo statistics full interrupt
+#define RxINT				0x00000005	/* Delayed Rx or indivi rx */
+#define TxDataInt			0x000000fa	/* Delayed Tx or indivi tx */
+#define TxMgmtInt			0x00000102	/* Delayed Tx or indivi tx */
+#define TxCoherent			0x00020000	/* tx coherent */
+#define RxCoherent			0x00010000	/* rx coherent */
+#define McuCommand			0x00000200	/* mcu */
+#define PreTBTTInt			0x00001000	/* Pre-TBTT interrupt */
+#define TBTTInt				0x00000800	/* TBTT interrupt */
+#define GPTimeOutInt			0x00008000	/* GPtimeout interrupt */
+#define AutoWakeupInt		0x00004000	/* AutoWakeupInt interrupt */
+#define FifoStaFullInt			0x00002000	/*  fifo statistics full interrupt */
 
 /***************************************************************************
   *	Rx Path software control block related data structures
   **************************************************************************/
 typedef struct _RX_BLK_ {
-//      RXD_STRUC               RxD; // sample
+/*      RXD_STRUC               RxD; // sample */
 	RT28XX_RXD_STRUC RxD;
 	PRXWI_STRUC pRxWI;
 	PHEADER_802_11 pHeader;
@@ -2174,7 +2174,7 @@
 	UCHAR *pData;
 	USHORT DataSize;
 	USHORT Flags;
-	UCHAR UserPriority;	// for calculate TKIP MIC using
+	UCHAR UserPriority;	/* for calculate TKIP MIC using */
 } RX_BLK;
 
 #define RX_BLK_SET_FLAG(_pRxBlk, _flag)		(_pRxBlk->Flags |= _flag)
@@ -2210,53 +2210,53 @@
 #define TX_RALINK_FRAME			0x10
 #define TX_FRAG_FRAME			0x20
 
-//      Currently the sizeof(TX_BLK) is 148 bytes.
+/*      Currently the sizeof(TX_BLK) is 148 bytes. */
 typedef struct _TX_BLK_ {
 	UCHAR QueIdx;
-	UCHAR TxFrameType;	// Indicate the Transmission type of the all frames in one batch
-	UCHAR TotalFrameNum;	// Total frame number want to send-out in one batch
-	USHORT TotalFragNum;	// Total frame fragments required in one batch
-	USHORT TotalFrameLen;	// Total length of all frames want to send-out in one batch
+	UCHAR TxFrameType;	/* Indicate the Transmission type of the all frames in one batch */
+	UCHAR TotalFrameNum;	/* Total frame number want to send-out in one batch */
+	USHORT TotalFragNum;	/* Total frame fragments required in one batch */
+	USHORT TotalFrameLen;	/* Total length of all frames want to send-out in one batch */
 
 	QUEUE_HEADER TxPacketList;
-	MAC_TABLE_ENTRY *pMacEntry;	// NULL: packet with 802.11 RA field is multicast/broadcast address
+	MAC_TABLE_ENTRY *pMacEntry;	/* NULL: packet with 802.11 RA field is multicast/broadcast address */
 	HTTRANSMIT_SETTING *pTransmit;
 
-	// Following structure used for the characteristics of a specific packet.
+	/* Following structure used for the characteristics of a specific packet. */
 	PNDIS_PACKET pPacket;
-	PUCHAR pSrcBufHeader;	// Reference to the head of sk_buff->data
-	PUCHAR pSrcBufData;	// Reference to the sk_buff->data, will changed depends on hanlding progresss
-	UINT SrcBufLen;		// Length of packet payload which not including Layer 2 header
-	PUCHAR pExtraLlcSnapEncap;	// NULL means no extra LLC/SNAP is required
-	UCHAR HeaderBuf[128];	// TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
-	//RT2870 2.1.0.0 uses only 80 bytes
-	//RT3070 2.1.1.0 uses only 96 bytes
-	//RT3090 2.1.0.0 uses only 96 bytes
-	UCHAR MpduHeaderLen;	// 802.11 header length NOT including the padding
-	UCHAR HdrPadLen;	// recording Header Padding Length;
-	UCHAR apidx;		// The interface associated to this packet
-	UCHAR Wcid;		// The MAC entry associated to this packet
-	UCHAR UserPriority;	// priority class of packet
-	UCHAR FrameGap;		// what kind of IFS this packet use
-	UCHAR MpduReqNum;	// number of fragments of this frame
-	UCHAR TxRate;		// TODO: Obsoleted? Should change to MCS?
-	UCHAR CipherAlg;	// cipher alogrithm
+	PUCHAR pSrcBufHeader;	/* Reference to the head of sk_buff->data */
+	PUCHAR pSrcBufData;	/* Reference to the sk_buff->data, will changed depends on hanlding progresss */
+	UINT SrcBufLen;		/* Length of packet payload which not including Layer 2 header */
+	PUCHAR pExtraLlcSnapEncap;	/* NULL means no extra LLC/SNAP is required */
+	UCHAR HeaderBuf[128];	/* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
+	/*RT2870 2.1.0.0 uses only 80 bytes */
+	/*RT3070 2.1.1.0 uses only 96 bytes */
+	/*RT3090 2.1.0.0 uses only 96 bytes */
+	UCHAR MpduHeaderLen;	/* 802.11 header length NOT including the padding */
+	UCHAR HdrPadLen;	/* recording Header Padding Length; */
+	UCHAR apidx;		/* The interface associated to this packet */
+	UCHAR Wcid;		/* The MAC entry associated to this packet */
+	UCHAR UserPriority;	/* priority class of packet */
+	UCHAR FrameGap;		/* what kind of IFS this packet use */
+	UCHAR MpduReqNum;	/* number of fragments of this frame */
+	UCHAR TxRate;		/* TODO: Obsoleted? Should change to MCS? */
+	UCHAR CipherAlg;	/* cipher alogrithm */
 	PCIPHER_KEY pKey;
 
-	USHORT Flags;		//See following definitions for detail.
+	USHORT Flags;		/*See following definitions for detail. */
 
-	//YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer.
-	ULONG Priv;		// Hardware specific value saved in here.
+	/*YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. */
+	ULONG Priv;		/* Hardware specific value saved in here. */
 } TX_BLK, *PTX_BLK;
 
-#define fTX_bRtsRequired		0x0001	// Indicate if need send RTS frame for protection. Not used in RT2860/RT2870.
-#define fTX_bAckRequired       	0x0002	// the packet need ack response
-#define fTX_bPiggyBack     		0x0004	// Legacy device use Piggback or not
-#define fTX_bHTRate         	0x0008	// allow to use HT rate
-#define fTX_bForceNonQoS       	0x0010	// force to transmit frame without WMM-QoS in HT mode
-#define fTX_bAllowFrag       	0x0020	// allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
-#define fTX_bMoreData			0x0040	// there are more data packets in PowerSave Queue
-#define fTX_bWMM				0x0080	// QOS Data
+#define fTX_bRtsRequired		0x0001	/* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */
+#define fTX_bAckRequired       	0x0002	/* the packet need ack response */
+#define fTX_bPiggyBack     		0x0004	/* Legacy device use Piggback or not */
+#define fTX_bHTRate         	0x0008	/* allow to use HT rate */
+#define fTX_bForceNonQoS       	0x0010	/* force to transmit frame without WMM-QoS in HT mode */
+#define fTX_bAllowFrag       	0x0020	/* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */
+#define fTX_bMoreData			0x0040	/* there are more data packets in PowerSave Queue */
+#define fTX_bWMM				0x0080	/* QOS Data */
 #define fTX_bClearEAPFrame		0x0100
 
 #define TX_BLK_SET_FLAG(_pTxBlk, _flag)		(_pTxBlk->Flags |= _flag)
@@ -2278,7 +2278,7 @@
 
 	switch (ProtoType) {
 	case ETH_P_IPV6:
-//                      memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
+/*                      memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */
 		*(*ppMacAddr) = 0x33;
 		*(*ppMacAddr + 1) = 0x33;
 		*(*ppMacAddr + 2) = pIpAddr[12];
@@ -2289,7 +2289,7 @@
 
 	case ETH_P_IP:
 	default:
-//                      memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
+/*                      memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */
 		*(*ppMacAddr) = 0x01;
 		*(*ppMacAddr + 1) = 0x00;
 		*(*ppMacAddr + 2) = 0x5e;
@@ -2305,9 +2305,9 @@
 char *GetPhyMode(int Mode);
 char *GetBW(int BW);
 
-//
-//  Private routines in rtmp_init.c
-//
+/* */
+/*  Private routines in rtmp_init.c */
+/* */
 NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle,
 				  OUT PRTMP_ADAPTER * ppAdapter);
 
@@ -2328,7 +2328,7 @@
 
 NDIS_STATUS RT30xxReadRFRegister(IN PRTMP_ADAPTER pAd,
 				 IN UCHAR regID, IN PUCHAR pValue);
-#endif // RTMP_RF_RW_SUPPORT //
+#endif /* RTMP_RF_RW_SUPPORT // */
 
 VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr);
 
@@ -2386,9 +2386,9 @@
 
 VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd);
 
-//
-// prototype in action.c
-//
+/* */
+/* prototype in action.c */
+/* */
 VOID ActionStateMachineInit(IN PRTMP_ADAPTER pAd,
 			    IN STATE_MACHINE * S,
 			    OUT STATE_MACHINE_FUNC Trans[]);
@@ -2444,9 +2444,9 @@
 			   IN ULONG Wcid,
 			   IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg);
 
-//
-// Private routines in rtmp_data.c
-//
+/* */
+/* Private routines in rtmp_data.c */
+/* */
 BOOLEAN RTMPHandleRxDoneInterrupt(IN PRTMP_ADAPTER pAd);
 
 BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd,
@@ -2511,11 +2511,11 @@
 
 VOID RTMPWriteTxDescriptor(IN PRTMP_ADAPTER pAd,
 			   IN PTXD_STRUC pTxD, IN BOOLEAN bWIV, IN UCHAR QSEL);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size);
 
-VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq,	// HW new a sequence.
+VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq,	/* HW new a sequence. */
 		   IN UCHAR BASize,
 		   IN UCHAR WCID,
 		   IN ULONG Length,
@@ -2538,8 +2538,8 @@
 NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd,
 			      IN UCHAR QueIdx, IN PUCHAR pData, IN UINT Length);
 
-//+++mark by shiang, now this function merge to MiniportMMRequest()
-//---mark by shiang, now this function merge to MiniportMMRequest()
+/*+++mark by shiang, now this function merge to MiniportMMRequest() */
+/*---mark by shiang, now this function merge to MiniportMMRequest() */
 
 VOID RTMPSendNullFrame(IN PRTMP_ADAPTER pAd,
 		       IN UCHAR TxRate, IN BOOLEAN bQosNull);
@@ -2588,9 +2588,9 @@
 
 BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket);
 
-//
-// Private routines in rtmp_wep.c
-//
+/* */
+/* Private routines in rtmp_wep.c */
+/* */
 VOID RTMPInitWepEngine(IN PRTMP_ADAPTER pAd,
 		       IN PUCHAR pKey,
 		       IN UCHAR KeyId, IN UCHAR KeyLen, IN PUCHAR pDest);
@@ -2619,11 +2619,11 @@
 
 UINT RTMP_CALC_FCS32(IN UINT Fcs, IN PUCHAR Cp, IN INT Len);
 
-//
-// MLME routines
-//
+/* */
+/* MLME routines */
+/* */
 
-// Asic/RF/BBP related functions
+/* Asic/RF/BBP related functions */
 
 VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd);
 
@@ -2711,7 +2711,7 @@
 
 #ifdef RTMP_MAC_PCI
 BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 VOID MacAddrRandomBssid(IN PRTMP_ADAPTER pAd, OUT PUCHAR pAddr);
 
@@ -2748,7 +2748,7 @@
 VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd,
 			   IN BA_ORI_ENTRY * pBAORIEntry);
 
-VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,	// AP might use this additional ht info IE
+VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,	/* AP might use this additional ht info IE */
 		 IN UCHAR HtCapabilityLen,
 		 IN UCHAR AddHtInfoLen,
 		 IN UCHAR NewExtChanOffset,
@@ -2761,7 +2761,7 @@
 		 IN PQBSS_LOAD_PARM pQbssLoad,
 		 IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE);
 
-ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,	// AP might use this additional ht info IE
+ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo,	/* AP might use this additional ht info IE */
 		       IN UCHAR HtCapabilityLen,
 		       IN UCHAR AddHtInfoLen,
 		       IN UCHAR NewExtChanOffset,
@@ -2849,7 +2849,7 @@
 		     IN PVOID FunctionContext,
 		     IN PVOID SystemSpecific2, IN PVOID SystemSpecific3);
 
-//----------------------------------------------
+/*---------------------------------------------- */
 VOID MlmeAssocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
 
 VOID MlmeReassocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
@@ -2879,7 +2879,7 @@
 
 #ifdef RTMP_MAC_USB
 VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 VOID ComposePsPoll(IN PRTMP_ADAPTER pAd);
 
@@ -2918,7 +2918,7 @@
 
 VOID InvalidStateWhenAuth(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
 
-//=============================================
+/*============================================= */
 
 VOID AuthRspStateMachineInit(IN PRTMP_ADAPTER pAd,
 			     IN PSTATE_MACHINE Sm,
@@ -2932,11 +2932,11 @@
 				 IN USHORT Seq,
 				 IN USHORT Reason, IN USHORT Status);
 
-//
-// Private routines in dls.c
-//
+/* */
+/* Private routines in dls.c */
+/* */
 
-//========================================
+/*======================================== */
 
 VOID SyncStateMachineInit(IN PRTMP_ADAPTER pAd,
 			  IN STATE_MACHINE * Sm,
@@ -2959,7 +2959,7 @@
 VOID EnqueueProbeRequest(IN PRTMP_ADAPTER pAd);
 
 BOOLEAN ScanRunning(IN PRTMP_ADAPTER pAd);
-//=========================================
+/*========================================= */
 
 VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd,
 		  IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]);
@@ -3135,7 +3135,7 @@
 		       OUT USHORT * Seq,
 		       OUT USHORT * Status, OUT CHAR ChlgText[]);
 
-BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo,	// AP might use this additional ht info IE
+BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo,	/* AP might use this additional ht info IE */
 			   OUT UCHAR * pHtCapabilityLen,
 			   OUT UCHAR * pAddHtInfoLen,
 			   OUT UCHAR * pNewExtChannelOffset,
@@ -3260,7 +3260,7 @@
 VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd);
 
 #ifdef RTMP_EFUSE_SUPPORT
-//2008/09/11:KH add to support efuse<--
+/*2008/09/11:KH add to support efuse<-- */
 INT set_eFuseGetFreeBlockCount_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
 
 INT set_eFusedump_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
@@ -3274,28 +3274,28 @@
 VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd, PUINT EfuseFreeBlock);
 
 INT eFuse_init(IN PRTMP_ADAPTER pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RTMP_EFUSE_SUPPORT //
+/*2008/09/11:KH add to support efuse--> */
+#endif /* RTMP_EFUSE_SUPPORT // */
 
-// add by johnli, RF power sequence setup
+/* add by johnli, RF power sequence setup */
 VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd);
 
 VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd);
 
 VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd);
-// end johnli
+/* end johnli */
 
 #ifdef RT3070
 VOID NICInitRT3070RFRegisters(IN RTMP_ADAPTER * pAd);
-#endif // RT3070 //
+#endif /* RT3070 // */
 #ifdef RT3090
 VOID NICInitRT3090RFRegisters(IN RTMP_ADAPTER * pAd);
-#endif // RT3090 //
+#endif /* RT3090 // */
 
 VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd);
 
 VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant);
-#endif // RT30xx //
+#endif /* RT30xx // */
 
 VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd);
 
@@ -3333,9 +3333,9 @@
 VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd,
 			    IN UCHAR AironetCellPowerLimit);
 
-//
-// Prototypes of function definition in rtmp_tkip.c
-//
+/* */
+/* Prototypes of function definition in rtmp_tkip.c */
+/* */
 VOID RTMPInitTkipEngine(IN PRTMP_ADAPTER pAd,
 			IN PUCHAR pTKey,
 			IN UCHAR KeyId,
@@ -3375,9 +3375,9 @@
 			   IN PUCHAR pData,
 			   IN ULONG DataByteCnt, IN PCIPHER_KEY pWpaKey);
 
-//
-// Prototypes of function definition in cmm_info.c
-//
+/* */
+/* Prototypes of function definition in cmm_info.c */
+/* */
 INT RT_CfgSetCountryRegion(IN PRTMP_ADAPTER pAd, IN PSTRING arg, IN INT band);
 
 INT RT_CfgSetWirelessMode(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
@@ -3393,9 +3393,9 @@
 		       IN UCHAR * pHashStr,
 		       IN INT hashStrLen, OUT PUCHAR pPMKBuf);
 
-//
-// Prototypes of function definition in cmm_info.c
-//
+/* */
+/* Prototypes of function definition in cmm_info.c */
+/* */
 VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd);
 
 VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode);
@@ -3478,9 +3478,9 @@
 VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd,
 		   IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx);
 
-//
-// function prototype in ap_wpa.c
-//
+/* */
+/* function prototype in ap_wpa.c */
+/* */
 VOID RTMPGetTxTscFromAsic(IN PRTMP_ADAPTER pAd,
 			  IN UCHAR apidx, OUT PUCHAR pTxTsc);
 
@@ -3524,7 +3524,7 @@
 		      IN UCHAR * plaintext,
 		      IN UINT32 p_len, OUT UCHAR * ciphertext);
 
-//typedef void (*TIMER_FUNCTION)(unsigned long);
+/*typedef void (*TIMER_FUNCTION)(unsigned long); */
 
 /* timeout -- ms */
 VOID RTMP_SetPeriodicTimer(IN NDIS_MINIPORT_TIMER * pTimer,
@@ -3675,7 +3675,7 @@
 
 PSTRING rstrtok(IN PSTRING s, IN const PSTRING ct);
 
-////////// common ioctl functions //////////
+/*//////// common ioctl functions ////////// */
 INT SetCommonHT(IN PRTMP_ADAPTER pAd);
 
 INT WpaCheckEapCode(IN PRTMP_ADAPTER pAd,
@@ -3688,15 +3688,15 @@
 
 BOOLEAN STARxDoneInterruptHandle(IN PRTMP_ADAPTER pAd, IN BOOLEAN argc);
 
-// AMPDU packet indication
+/* AMPDU packet indication */
 VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd,
 			   IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
 
-// AMSDU packet indication
+/* AMSDU packet indication */
 VOID Indicate_AMSDU_Packet(IN PRTMP_ADAPTER pAd,
 			   IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
 
-// Normal legacy Rx packet indication
+/* Normal legacy Rx packet indication */
 VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
 			    IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
 
@@ -3711,7 +3711,7 @@
 				 IN PUCHAR pHeader802_3,
 				 IN UCHAR FromWhichBSSID);
 
-// remove LLC and get 802_3 Header
+/* remove LLC and get 802_3 Header */
 #define  RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3)	\
 {																				\
 	PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA;                                 \
@@ -3748,7 +3748,7 @@
 
 #define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
 			Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
-			//announce_802_3_packet(_pAd, _pPacket);
+			/*announce_802_3_packet(_pAd, _pPacket); */
 
 PNDIS_PACKET DuplicatePacket(IN PRTMP_ADAPTER pAd,
 			     IN PNDIS_PACKET pPacket, IN UCHAR FromWhichBSSID);
@@ -3757,7 +3757,7 @@
 			 IN PNDIS_PACKET pPacket,
 			 IN PUCHAR pData, IN ULONG DataSize);
 
-// Normal, AMPDU or AMSDU
+/* Normal, AMPDU or AMSDU */
 VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
 				 IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID);
 
@@ -3913,9 +3913,9 @@
 BOOLEAN RtmpRaDevCtrlExit(IN RTMP_ADAPTER * pAd);
 
 #ifdef RTMP_MAC_PCI
-//
-// Function Prototype in cmm_data_pci.c
-//
+/* */
+/* Function Prototype in cmm_data_pci.c */
+/* */
 USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd,
 			       IN TX_BLK * pTxBlk,
 			       IN BOOLEAN bIsLast, OUT USHORT * FreeNumber);
@@ -3988,12 +3988,12 @@
 VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd);
 
 VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 #ifdef RTMP_MAC_USB
-//
-// Function Prototype in rtusb_bulk.c
-//
+/* */
+/* Function Prototype in rtusb_bulk.c */
+/* */
 VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd,
 		     IN PTX_CONTEXT pTxContext,
 		     IN UCHAR BulkOutPipeId, IN usb_complete_t Func);
@@ -4036,9 +4036,9 @@
 
 VOID RTUSBBulkRxHandle(IN unsigned long data);
 
-//
-// Function Prototype in rtusb_io.c
-//
+/* */
+/* Function Prototype in rtusb_io.c */
+/* */
 NTSTATUS RTUSBMultiRead(IN PRTMP_ADAPTER pAd,
 			IN USHORT Offset, OUT PUCHAR pData, IN USHORT length);
 
@@ -4152,9 +4152,9 @@
 
 INT MlmeThread(IN PVOID Context);
 
-//
-// Function Prototype in rtusb_data.c
-//
+/* */
+/* Function Prototype in rtusb_data.c */
+/* */
 NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd,
 				       IN UCHAR BulkOutPipeId,
 				       IN UINT32 NumberRequired);
@@ -4167,9 +4167,9 @@
 		     IN BOOLEAN bWiv,
 		     IN UCHAR QueueSel, IN UCHAR NextValid, IN UCHAR TxBurst);
 
-//
-// Function Prototype in cmm_data_usb.c
-//
+/* */
+/* Function Prototype in cmm_data_usb.c */
+/* */
 USHORT RtmpUSB_WriteSubTxResource(IN PRTMP_ADAPTER pAd,
 				  IN TX_BLK * pTxBlk,
 				  IN BOOLEAN bIsLast, OUT USHORT * FreeNumber);
@@ -4219,7 +4219,7 @@
 VOID RT28xxUsbMlmeRadioOn(IN PRTMP_ADAPTER pAd);
 
 VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel);
 
@@ -4237,7 +4237,7 @@
 void RtmpTimerQExit(IN RTMP_ADAPTER * pAd);
 
 void RtmpTimerQInit(IN RTMP_ADAPTER * pAd);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
 
 VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd);
 
@@ -4291,7 +4291,7 @@
 		rt28xx_close(pAd->net_dev);
 	return;
 }
-#endif // LINUX //
+#endif /* LINUX // */
 
 /*
 	OS Related funciton prototype definitions.
@@ -4353,4 +4353,4 @@
 
 int RtmpOSFileWrite(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int writeLen);
 
-#endif // __RTMP_H__
+#endif /* __RTMP_H__ */
diff --git a/drivers/staging/rt2860/rtmp_chip.h b/drivers/staging/rt2860/rtmp_chip.h
index 7fa73e6..ea8d2ed 100644
--- a/drivers/staging/rt2860/rtmp_chip.h
+++ b/drivers/staging/rt2860/rtmp_chip.h
@@ -42,30 +42,30 @@
 
 #ifdef RT2860
 #include "chip/rt2860.h"
-#endif // RT2860 //
+#endif /* RT2860 // */
 #ifdef RT2870
 #include "chip/rt2870.h"
-#endif // RT2870 //
+#endif /* RT2870 // */
 #ifdef RT3070
 #include "chip/rt3070.h"
-#endif // RT3070 //
+#endif /* RT3070 // */
 #ifdef RT3090
 #include "chip/rt3090.h"
-#endif // RT3090 //
+#endif /* RT3090 // */
 
-// We will have a cost down version which mac version is 0x3090xxxx
-//
-// RT3090A facts
-//
-// a) 2.4 GHz
-// b) Replacement for RT3090
-// c) Internal LNA
-// d) Interference over channel #14
-// e) New BBP features (e.g., SIG re-modulation)
-//
+/* We will have a cost down version which mac version is 0x3090xxxx */
+/* */
+/* RT3090A facts */
+/* */
+/* a) 2.4 GHz */
+/* b) Replacement for RT3090 */
+/* c) Internal LNA */
+/* d) Interference over channel #14 */
+/* e) New BBP features (e.g., SIG re-modulation) */
+/* */
 #define IS_RT3090A(_pAd)				((((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
 
-// We will have a cost down version which mac version is 0x3090xxxx
+/* We will have a cost down version which mac version is 0x3090xxxx */
 #define IS_RT3090(_pAd)				((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (IS_RT3090A(_pAd)))
 
 #define IS_RT3070(_pAd)		(((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
@@ -73,28 +73,28 @@
 #define IS_RT2070(_pAd)		(((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
 
 #define IS_RT30xx(_pAd)		(((_pAd)->MACVersion & 0xfff00000) == 0x30700000||IS_RT3090A(_pAd))
-//#define IS_RT305X(_pAd)               ((_pAd)->MACVersion == 0x28720200)
+/*#define IS_RT305X(_pAd)               ((_pAd)->MACVersion == 0x28720200) */
 
 /* RT3572, 3592, 3562, 3062 share the same MAC version */
 #define IS_RT3572(_pAd)		(((_pAd)->MACVersion & 0xffff0000) == 0x35720000)
 #define IS_VERSION_BEFORE_F(_pAd)			(((_pAd)->MACVersion&0xffff) <= 0x0211)
-// F version is 0x0212, E version is 0x0211. 309x can save more power after F version.
+/* F version is 0x0212, E version is 0x0211. 309x can save more power after F version. */
 #define IS_VERSION_AFTER_F(_pAd)			((((_pAd)->MACVersion&0xffff) >= 0x0212) || (((_pAd)->b3090ESpecialChip == TRUE)))
-//
-// RT3390 facts
-//
-// a) Base on RT3090 (RF IC: RT3020)
-// b) 2.4 GHz
-// c) 1x1
-// d) Single chip
-// e) Internal components: PA and LNA
-//
-//RT3390,RT3370
+/* */
+/* RT3390 facts */
+/* */
+/* a) Base on RT3090 (RF IC: RT3020) */
+/* b) 2.4 GHz */
+/* c) 1x1 */
+/* d) Single chip */
+/* e) Internal components: PA and LNA */
+/* */
+/*RT3390,RT3370 */
 #define IS_RT3390(_pAd)				(((_pAd)->MACVersion & 0xFFFF0000) == 0x33900000)
 
-// ------------------------------------------------------
-// PCI registers - base address 0x0000
-// ------------------------------------------------------
+/* ------------------------------------------------------ */
+/* PCI registers - base address 0x0000 */
+/* ------------------------------------------------------ */
 #define CHIP_PCI_CFG		0x0000
 #define CHIP_PCI_EECTRL		0x0004
 #define CHIP_PCI_MCUCTRL	0x0008
@@ -103,15 +103,15 @@
 
 #define RETRY_LIMIT		10
 
-// ------------------------------------------------------
-// BBP & RF     definition
-// ------------------------------------------------------
+/* ------------------------------------------------------ */
+/* BBP & RF     definition */
+/* ------------------------------------------------------ */
 #define	BUSY		                1
 #define	IDLE		                0
 
-//-------------------------------------------------------------------------
-// EEPROM definition
-//-------------------------------------------------------------------------
+/*------------------------------------------------------------------------- */
+/* EEPROM definition */
+/*------------------------------------------------------------------------- */
 #define EEDO                        0x08
 #define EEDI                        0x04
 #define EECS                        0x02
@@ -123,11 +123,11 @@
 #define EEPROM_EWDS_OPCODE          0x10
 #define EEPROM_EWEN_OPCODE          0x13
 
-#define NUM_EEPROM_BBP_PARMS		19	// Include NIC Config 0, 1, CR, TX ALC step, BBPs
+#define NUM_EEPROM_BBP_PARMS		19	/* Include NIC Config 0, 1, CR, TX ALC step, BBPs */
 #define NUM_EEPROM_TX_G_PARMS		7
-#define EEPROM_NIC1_OFFSET          0x34	// The address is from NIC config 0, not BBP register ID
-#define EEPROM_NIC2_OFFSET          0x36	// The address is from NIC config 0, not BBP register ID
-#define EEPROM_BBP_BASE_OFFSET		0xf0	// The address is from NIC config 0, not BBP register ID
+#define EEPROM_NIC1_OFFSET          0x34	/* The address is from NIC config 0, not BBP register ID */
+#define EEPROM_NIC2_OFFSET          0x36	/* The address is from NIC config 0, not BBP register ID */
+#define EEPROM_BBP_BASE_OFFSET		0xf0	/* The address is from NIC config 0, not BBP register ID */
 #define EEPROM_G_TX_PWR_OFFSET		0x52
 #define EEPROM_G_TX2_PWR_OFFSET		0x60
 #define EEPROM_LED1_OFFSET			0x3c
@@ -139,22 +139,22 @@
 #define EEPROM_RSSI_A_OFFSET		0x4a
 #define EEPROM_TXMIXER_GAIN_5G		0x4c
 #define EEPROM_DEFINE_MAX_TXPWR		0x4e
-#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G	0xde	// 20MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G	0xee	// 40MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_20MHZ_5G		0xfa	// 20MHZ 5G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_5G		0x10a	// 40MHZ 5G tx power.
+#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G	0xde	/* 20MHZ 2.4G tx power. */
+#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G	0xee	/* 40MHZ 2.4G tx power. */
+#define EEPROM_TXPOWER_BYRATE_20MHZ_5G		0xfa	/* 20MHZ 5G tx power. */
+#define EEPROM_TXPOWER_BYRATE_40MHZ_5G		0x10a	/* 40MHZ 5G tx power. */
 #define EEPROM_A_TX_PWR_OFFSET      0x78
 #define EEPROM_A_TX2_PWR_OFFSET      0xa6
-//#define EEPROM_Japan_TX_PWR_OFFSET      0x90 // 802.11j
-//#define EEPROM_Japan_TX2_PWR_OFFSET      0xbe
-//#define EEPROM_TSSI_REF_OFFSET        0x54
-//#define EEPROM_TSSI_DELTA_OFFSET      0x24
-//#define EEPROM_CCK_TX_PWR_OFFSET  0x62
-//#define EEPROM_CALIBRATE_OFFSET       0x7c
+/*#define EEPROM_Japan_TX_PWR_OFFSET      0x90 // 802.11j */
+/*#define EEPROM_Japan_TX2_PWR_OFFSET      0xbe */
+/*#define EEPROM_TSSI_REF_OFFSET        0x54 */
+/*#define EEPROM_TSSI_DELTA_OFFSET      0x24 */
+/*#define EEPROM_CCK_TX_PWR_OFFSET  0x62 */
+/*#define EEPROM_CALIBRATE_OFFSET       0x7c */
 #define EEPROM_VERSION_OFFSET       0x02
 #define EEPROM_FREQ_OFFSET			0x3a
-#define EEPROM_TXPOWER_BYRATE	0xde	// 20MHZ power.
-#define EEPROM_TXPOWER_DELTA		0x50	// 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
+#define EEPROM_TXPOWER_BYRATE	0xde	/* 20MHZ power. */
+#define EEPROM_TXPOWER_DELTA		0x50	/* 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ. */
 #define VALID_EEPROM_VERSION        1
 
 /*
@@ -163,13 +163,13 @@
 #define RT28xx_EEPROM_READ16(_pAd, _offset, _value)			\
 	(_pAd)->chipOps.eeread((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (PUSHORT)&(_value))
 
-// -------------------------------------------------------------------
-//  E2PROM data layout
-// -------------------------------------------------------------------
+/* ------------------------------------------------------------------- */
+/*  E2PROM data layout */
+/* ------------------------------------------------------------------- */
 
-//
-// MCU_LEDCS: MCU LED Control Setting.
-//
+/* */
+/* MCU_LEDCS: MCU LED Control Setting. */
+/* */
 typedef union _MCU_LEDCS_STRUC {
 	struct {
 		UCHAR LedMode:7;
@@ -178,14 +178,14 @@
 	UCHAR word;
 } MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
 
-//
-// EEPROM antenna select format
-//
+/* */
+/* EEPROM antenna select format */
+/* */
 typedef union _EEPROM_ANTENNA_STRUC {
 	struct {
-		USHORT RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-		USHORT TxPath:4;	// 1: 1T, 2: 2T
-		USHORT RfIcType:4;	// see E2PROM document
+		USHORT RxPath:4;	/* 1: 1R, 2: 2R, 3: 3R */
+		USHORT TxPath:4;	/* 1: 1T, 2: 2T */
+		USHORT RfIcType:4;	/* see E2PROM document */
 		USHORT Rsv:4;
 	} field;
 	USHORT word;
@@ -193,66 +193,66 @@
 
 typedef union _EEPROM_NIC_CINFIG2_STRUC {
 	struct {
-		USHORT HardwareRadioControl:1;	// 1:enable, 0:disable
-		USHORT DynamicTxAgcControl:1;	//
-		USHORT ExternalLNAForG:1;	//
-		USHORT ExternalLNAForA:1;	// external LNA enable for 2.4G
-		USHORT CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
+		USHORT HardwareRadioControl:1;	/* 1:enable, 0:disable */
+		USHORT DynamicTxAgcControl:1;	/* */
+		USHORT ExternalLNAForG:1;	/* */
+		USHORT ExternalLNAForA:1;	/* external LNA enable for 2.4G */
+		USHORT CardbusAcceleration:1;	/* !!! NOTE: 0 - enable, 1 - disable */
 		USHORT BW40MSidebandForG:1;
 		USHORT BW40MSidebandForA:1;
-		USHORT EnableWPSPBC:1;	// WPS PBC Control bit
-		USHORT BW40MAvailForG:1;	// 0:enable, 1:disable
-		USHORT BW40MAvailForA:1;	// 0:enable, 1:disable
-		USHORT Rsv1:1;	// must be 0
-		USHORT AntDiversity:1;	// Antenna diversity
-		USHORT Rsv2:3;	// must be 0
-		USHORT DACTestBit:1;	// control if driver should patch the DAC issue
+		USHORT EnableWPSPBC:1;	/* WPS PBC Control bit */
+		USHORT BW40MAvailForG:1;	/* 0:enable, 1:disable */
+		USHORT BW40MAvailForA:1;	/* 0:enable, 1:disable */
+		USHORT Rsv1:1;	/* must be 0 */
+		USHORT AntDiversity:1;	/* Antenna diversity */
+		USHORT Rsv2:3;	/* must be 0 */
+		USHORT DACTestBit:1;	/* control if driver should patch the DAC issue */
 	} field;
 	USHORT word;
 } EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
 
-//
-// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
-//
+/* */
+/* TX_PWR Value valid range 0xFA(-6) ~ 0x24(36) */
+/* */
 typedef union _EEPROM_TX_PWR_STRUC {
 	struct {
-		CHAR Byte0;	// Low Byte
-		CHAR Byte1;	// High Byte
+		CHAR Byte0;	/* Low Byte */
+		CHAR Byte1;	/* High Byte */
 	} field;
 	USHORT word;
 } EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
 
 typedef union _EEPROM_VERSION_STRUC {
 	struct {
-		UCHAR FaeReleaseNumber;	// Low Byte
-		UCHAR Version;	// High Byte
+		UCHAR FaeReleaseNumber;	/* Low Byte */
+		UCHAR Version;	/* High Byte */
 	} field;
 	USHORT word;
 } EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
 
 typedef union _EEPROM_LED_STRUC {
 	struct {
-		USHORT PolarityRDY_G:1;	// Polarity RDY_G setting.
-		USHORT PolarityRDY_A:1;	// Polarity RDY_A setting.
-		USHORT PolarityACT:1;	// Polarity ACT setting.
-		USHORT PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT LedMode:5;	// Led mode.
-		USHORT Rsvd:3;	// Reserved
+		USHORT PolarityRDY_G:1;	/* Polarity RDY_G setting. */
+		USHORT PolarityRDY_A:1;	/* Polarity RDY_A setting. */
+		USHORT PolarityACT:1;	/* Polarity ACT setting. */
+		USHORT PolarityGPIO_0:1;	/* Polarity GPIO#0 setting. */
+		USHORT PolarityGPIO_1:1;	/* Polarity GPIO#1 setting. */
+		USHORT PolarityGPIO_2:1;	/* Polarity GPIO#2 setting. */
+		USHORT PolarityGPIO_3:1;	/* Polarity GPIO#3 setting. */
+		USHORT PolarityGPIO_4:1;	/* Polarity GPIO#4 setting. */
+		USHORT LedMode:5;	/* Led mode. */
+		USHORT Rsvd:3;	/* Reserved */
 	} field;
 	USHORT word;
 } EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
 
 typedef union _EEPROM_TXPOWER_DELTA_STRUC {
 	struct {
-		UCHAR DeltaValue:6;	// Tx Power dalta value (MAX=4)
-		UCHAR Type:1;	// 1: plus the delta value, 0: minus the delta value
-		UCHAR TxPowerEnable:1;	// Enable
+		UCHAR DeltaValue:6;	/* Tx Power dalta value (MAX=4) */
+		UCHAR Type:1;	/* 1: plus the delta value, 0: minus the delta value */
+		UCHAR TxPowerEnable:1;	/* Enable */
 	} field;
 	UCHAR value;
 } EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
 
-#endif // __RTMP_CHIP_H__ //
+#endif /* __RTMP_CHIP_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_ckipmic.h b/drivers/staging/rt2860/rtmp_ckipmic.h
index ad35dca..a8108f7 100644
--- a/drivers/staging/rt2860/rtmp_ckipmic.h
+++ b/drivers/staging/rt2860/rtmp_ckipmic.h
@@ -60,4 +60,4 @@
 
 VOID mix_column(IN PUCHAR in, OUT PUCHAR out);
 
-#endif //__RTMP_CKIPMIC_H__
+#endif /*__RTMP_CKIPMIC_H__ */
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index 31b52d6..39c27f9 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -41,9 +41,9 @@
 
 #include "oid.h"
 
-//
-//  Debug information verbosity: lower values indicate higher urgency
-//
+/* */
+/*  Debug information verbosity: lower values indicate higher urgency */
+/* */
 #define RT_DEBUG_OFF        0
 #define RT_DEBUG_ERROR      1
 #define RT_DEBUG_WARN       2
@@ -55,15 +55,15 @@
 #define NIC_DBG_STRING      ("**RT28xx**")
 
 #ifdef RTMP_MAC_USB
-#define TX_RING_SIZE            8	// 1
+#define TX_RING_SIZE            8	/* 1 */
 #define PRIO_RING_SIZE          8
-#define MGMT_RING_SIZE		32	// PRIO_RING_SIZE
+#define MGMT_RING_SIZE		32	/* PRIO_RING_SIZE */
 #define RX_RING_SIZE            8
 #define MAX_TX_PROCESS          4
 #define LOCAL_TXBUF_SIZE        2048
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-//#define PACKED
+/*#define PACKED */
 
 #define RALINK_2883_VERSION		((UINT32)0x28830300)
 #define RALINK_2880E_VERSION	((UINT32)0x28720200)
@@ -71,38 +71,38 @@
 
 #define MAX_RX_PKT_LEN	1520
 
-//
-// Entry number for each DMA descriptor ring
-//
+/* */
+/* Entry number for each DMA descriptor ring */
+/* */
 
 #ifdef RTMP_MAC_PCI
-#define TX_RING_SIZE            64	//64
+#define TX_RING_SIZE            64	/*64 */
 #define MGMT_RING_SIZE          128
-#define RX_RING_SIZE            128	//64
-#define MAX_TX_PROCESS          TX_RING_SIZE	//8
+#define RX_RING_SIZE            128	/*64 */
+#define MAX_TX_PROCESS          TX_RING_SIZE	/*8 */
 #define MAX_DMA_DONE_PROCESS    TX_RING_SIZE
-#define MAX_TX_DONE_PROCESS     TX_RING_SIZE	//8
+#define MAX_TX_DONE_PROCESS     TX_RING_SIZE	/*8 */
 #define LOCAL_TXBUF_SIZE        2
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-#define MAX_RX_PROCESS          128	//64 //32
+#define MAX_RX_PROCESS          128	/*64 //32 */
 #define NUM_OF_LOCAL_TXBUF      2
 #define TXD_SIZE                16
 #define TXWI_SIZE               16
 #define RXD_SIZE               	16
 #define RXWI_SIZE             	16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE  96	// only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE    1536	//2048
-#define RX_BUFFER_AGGRESIZE     3840	//3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE      3840	//3904 //3968 //4096 //2048 //4096
+/* TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header */
+#define TX_DMA_1ST_BUFFER_SIZE  96	/* only the 1st physical buffer is pre-allocated */
+#define MGMT_DMA_BUFFER_SIZE    1536	/*2048 */
+#define RX_BUFFER_AGGRESIZE     3840	/*3904 //3968 //4096 //2048 //4096 */
+#define RX_BUFFER_NORMSIZE      3840	/*3904 //3968 //4096 //2048 //4096 */
 #define TX_BUFFER_NORMSIZE		RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE          2346	// Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE    3840	//3904 //3968 //4096
+#define MAX_FRAME_SIZE          2346	/* Maximum 802.11 frame size */
+#define MAX_AGGREGATION_SIZE    3840	/*3904 //3968 //4096 */
 #define MAX_NUM_OF_TUPLE_CACHE  2
 #define MAX_MCAST_LIST_SIZE     32
 #define MAX_LEN_OF_VENDOR_DESC  64
-//#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
+/*#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ */
 #define MAX_SIZE_OF_MCAST_PSQ               32
 
 #define MAX_RX_PROCESS_CNT	(RX_RING_SIZE)
@@ -125,27 +125,27 @@
 	And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to
 	clConfig.clNum = RX_RING_SIZE * 4;
 */
-// TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS?????
-#define MAX_PACKETS_IN_QUEUE				(512)	//(512)    // to pass WMM A5-WPAPSK
+/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */
+#define MAX_PACKETS_IN_QUEUE				(512)	/*(512)    // to pass WMM A5-WPAPSK */
 
 #define MAX_PACKETS_IN_MCAST_PS_QUEUE		32
-#define MAX_PACKETS_IN_PS_QUEUE				128	//32
+#define MAX_PACKETS_IN_PS_QUEUE				128	/*32 */
 #define WMM_NUM_OF_AC                       4	/* AC0, AC1, AC2, and AC3 */
 
 #ifdef RTMP_EFUSE_SUPPORT
-//2008/09/11:KH add to support efuse<--
+/*2008/09/11:KH add to support efuse<-- */
 #define MAX_EEPROM_BIN_FILE_SIZE					1024
 #define EFUSE_BUFFER_PATH						"/tmp/RT30xxEEPROM.bin"
-//2008/09/11:KH add to support efuse-->
-#endif // RTMP_EFUSE_SUPPORT //
+/*2008/09/11:KH add to support efuse--> */
+#endif /* RTMP_EFUSE_SUPPORT // */
 
-// RxFilter
+/* RxFilter */
 #define STANORMAL	 0x17f97
 #define APNORMAL	 0x15f97
 #define PSPXLINK	 0x17f93
-//
-//  RTMP_ADAPTER flags
-//
+/* */
+/*  RTMP_ADAPTER flags */
+/* */
 #define fRTMP_ADAPTER_MAP_REGISTER          0x00000001
 #define fRTMP_ADAPTER_INTERRUPT_IN_USE      0x00000002
 #define fRTMP_ADAPTER_HARDWARE_ERROR        0x00000004
@@ -171,13 +171,13 @@
 #define fRTMP_ADAPTER_SCAN_2040 			0x04000000
 #define	fRTMP_ADAPTER_RADIO_MEASUREMENT		0x08000000
 
-#define fRTMP_ADAPTER_START_UP         		0x10000000	//Devive already initialized and enabled Tx/Rx.
+#define fRTMP_ADAPTER_START_UP         		0x10000000	/*Devive already initialized and enabled Tx/Rx. */
 #define fRTMP_ADAPTER_MEDIA_STATE_CHANGE    0x20000000
 #define fRTMP_ADAPTER_IDLE_RADIO_OFF        0x40000000
 
-//
-//  STA operation status flags
-//
+/* */
+/*  STA operation status flags */
+/* */
 #define fOP_STATUS_INFRA_ON                 0x00000001
 #define fOP_STATUS_ADHOC_ON                 0x00000002
 #define fOP_STATUS_BG_PROTECTION_INUSED     0x00000004
@@ -187,8 +187,8 @@
 #define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
 #define fOP_STATUS_WMM_INUSED               0x00000100
 #define fOP_STATUS_AGGREGATION_INUSED       0x00000200
-#define fOP_STATUS_DOZE                     0x00000400	// debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800	// piggy-back, and aggregation
+#define fOP_STATUS_DOZE                     0x00000400	/* debug purpose */
+#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800	/* piggy-back, and aggregation */
 #define fOP_STATUS_APSD_INUSED				0x00001000
 #define fOP_STATUS_TX_AMSDU_INUSED			0x00002000
 #define fOP_STATUS_MAX_RETRY_ENABLED		0x00004000
@@ -196,25 +196,25 @@
 #define fOP_STATUS_PCIE_DEVICE       0x00020000
 #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE fOP_STATUS_PCIE_DEVICE
 
-//
-//  RTMP_ADAPTER PSFlags : related to advanced power save.
-//
-// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up
+/* */
+/*  RTMP_ADAPTER PSFlags : related to advanced power save. */
+/* */
+/* Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up */
 #define fRTMP_PS_CAN_GO_SLEEP          0x00000001
-// Indicate whether driver has issue a LinkControl command to PCIe L1
+/* Indicate whether driver has issue a LinkControl command to PCIe L1 */
 #define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND          0x00000002
-// Indicate driver should disable kick off hardware to send packets from now.
+/* Indicate driver should disable kick off hardware to send packets from now. */
 #define fRTMP_PS_DISABLE_TX         0x00000004
-// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which  doesn't indicate unicate nor multicast packets for me
-//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
+/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which  doesn't indicate unicate nor multicast packets for me */
+/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */
 #define fRTMP_PS_GO_TO_SLEEP_NOW         0x00000008
-#define fRTMP_PS_TOGGLE_L1		0x00000010	// Use Toggle L1 mechanism for rt28xx PCIe
+#define fRTMP_PS_TOGGLE_L1		0x00000010	/* Use Toggle L1 mechanism for rt28xx PCIe */
 
 #ifdef RT3090
 #define WAKE_MCU_CMD				0x31
 #define SLEEP_MCU_CMD					0x30
 #define RFOFF_MCU_CMD				0x35
-#endif // RT3090 //
+#endif /* RT3090 // */
 
 #define CCKSETPROTECT		0x1
 #define OFDMSETPROTECT		0x2
@@ -224,12 +224,12 @@
 #define GR40SETPROTECT		0x20
 #define ALLN_SETPROTECT		(GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
 
-//
-//  AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001	// CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002	// CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004	// CLIENT support piggy-back
+/* */
+/*  AP's client table operation status flags */
+/* */
+#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001	/* CLIENT can parse QOS DATA frame */
+#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002	/* CLIENT can receive Ralink's proprietary TX aggregation frame */
+#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004	/* CLIENT support piggy-back */
 #define fCLIENT_STATUS_AMSDU_INUSED			0x00000008
 #define fCLIENT_STATUS_SGI20_CAPABLE		0x00000010
 #define fCLIENT_STATUS_SGI40_CAPABLE		0x00000020
@@ -241,45 +241,45 @@
 #define fCLIENT_STATUS_APSD_CAPABLE         0x00000800	/* UAPSD STATION */
 
 #define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
-//
-//  STA configuration flags
-//
+/* */
+/*  STA configuration flags */
+/* */
 
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
+/* 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case */
 #define HT_NO_PROTECT	0
 #define HT_LEGACY_PROTECT	1
 #define HT_40_PROTECT	2
 #define HT_2040_PROTECT	3
 #define HT_RTSCTS_6M	7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS	8	// rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS	9	// Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
+/*following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. */
+#define HT_ATHEROS	8	/* rt2860c has problem with atheros chip. we need to turn on RTS/CTS . */
+#define HT_FORCERTSCTS	9	/* Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. */
 
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
+/* */
+/* RX Packet Filter control flags. Apply on pAd->PacketFilter */
+/* */
 #define fRX_FILTER_ACCEPT_DIRECT            NDIS_PACKET_TYPE_DIRECTED
 #define fRX_FILTER_ACCEPT_MULTICAST         NDIS_PACKET_TYPE_MULTICAST
 #define fRX_FILTER_ACCEPT_BROADCAST         NDIS_PACKET_TYPE_BROADCAST
 #define fRX_FILTER_ACCEPT_ALL_MULTICAST     NDIS_PACKET_TYPE_ALL_MULTICAST
 #define fRX_FILTER_ACCEPT_PROMISCUOUS       NDIS_PACKET_TYPE_PROMISCUOUS
 
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
+/* */
+/* Error code section */
+/* */
+/* NDIS_ERROR_CODE_ADAPTER_NOT_FOUND */
 #define ERRLOG_READ_PCI_SLOT_FAILED     0x00000101L
 #define ERRLOG_WRITE_PCI_SLOT_FAILED    0x00000102L
 #define ERRLOG_VENDOR_DEVICE_NOMATCH    0x00000103L
 
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
+/* NDIS_ERROR_CODE_ADAPTER_DISABLED */
 #define ERRLOG_BUS_MASTER_DISABLED      0x00000201L
 
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
+/* NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION */
 #define ERRLOG_INVALID_SPEED_DUPLEX     0x00000301L
 #define ERRLOG_SET_SECONDARY_FAILED     0x00000302L
 
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
+/* NDIS_ERROR_CODE_OUT_OF_RESOURCES */
 #define ERRLOG_OUT_OF_MEMORY            0x00000401L
 #define ERRLOG_OUT_OF_SHARED_MEMORY     0x00000402L
 #define ERRLOG_OUT_OF_MAP_REGISTERS     0x00000403L
@@ -289,21 +289,21 @@
 #define ERRLOG_OUT_OF_NDIS_PACKET       0x00000407L
 #define ERRLOG_OUT_OF_LOOKASIDE_MEMORY  0x00000408L
 
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
+/* NDIS_ERROR_CODE_HARDWARE_FAILURE */
 #define ERRLOG_SELFTEST_FAILED          0x00000501L
 #define ERRLOG_INITIALIZE_ADAPTER       0x00000502L
 #define ERRLOG_REMOVE_MINIPORT          0x00000503L
 
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
+/* NDIS_ERROR_CODE_RESOURCE_CONFLICT */
 #define ERRLOG_MAP_IO_SPACE             0x00000601L
 #define ERRLOG_QUERY_ADAPTER_RESOURCES  0x00000602L
 #define ERRLOG_NO_IO_RESOURCE           0x00000603L
 #define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
 #define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L
 
-// WDS definition
+/* WDS definition */
 #define	MAX_WDS_ENTRY               4
-#define WDS_PAIRWISE_KEY_OFFSET     60	// WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define WDS_PAIRWISE_KEY_OFFSET     60	/* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
 
 #define	WDS_DISABLE_MODE            0
 #define	WDS_RESTRICT_MODE           1
@@ -319,7 +319,7 @@
 #ifdef MBSS_SUPPORT
 #undef	MAX_MBSSID_NUM
 #define MAX_MBSSID_NUM				(8 - MAX_MESH_NUM - MAX_APCLI_NUM)
-#endif // MBSS_SUPPORT //
+#endif /* MBSS_SUPPORT // */
 
 /* sanity check for apidx */
 #define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
@@ -333,10 +333,10 @@
 #define FIRST_MBSSID                1
 
 #define MAX_BEACON_SIZE				512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// -    these wcid 238~253 are reserved for beacon#6(ra6).
-// -    these wcid 222~237 are reserved for beacon#7(ra7).
+/* If the MAX_MBSSID_NUM is larger than 6, */
+/* it shall reserve some WCID space(wcid 222~253) for beacon frames. */
+/* -    these wcid 238~253 are reserved for beacon#6(ra6). */
+/* -    these wcid 222~237 are reserved for beacon#7(ra7). */
 #if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
 #define HW_RESERVED_WCID	222
 #elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
@@ -345,17 +345,17 @@
 #define HW_RESERVED_WCID	255
 #endif
 
-// Then dedicate wcid of DFS and Carrier-Sense.
+/* Then dedicate wcid of DFS and Carrier-Sense. */
 #define DFS_CTS_WCID 		(HW_RESERVED_WCID - 1)
 #define CS_CTS_WCID 		(HW_RESERVED_WCID - 2)
 #define LAST_SPECIFIC_WCID	(HW_RESERVED_WCID - 2)
 
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
+/* If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. */
+/* If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. */
 #define MAX_AVAILABLE_CLIENT_WCID	(LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
 
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
+/* TX need WCID to find Cipher Key */
+/* these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. */
 #define GET_GroupKey_WCID(__wcid, __bssidx) \
 	{										\
 		__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx;	\
@@ -363,7 +363,7 @@
 
 #define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
 
-// definition to support multiple BSSID
+/* definition to support multiple BSSID */
 #define BSS0                            0
 #define BSS1                            1
 #define BSS2                            2
@@ -373,26 +373,26 @@
 #define BSS6                            6
 #define BSS7                            7
 
-//============================================================
-// Length definitions
+/*============================================================ */
+/* Length definitions */
 #define PEER_KEY_NO                     2
 #define MAC_ADDR_LEN                    6
 #define TIMESTAMP_LEN                   8
-#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES	// 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY                  32	// 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS	// 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS             20	// 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES	/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
+#define MAX_LEN_OF_KEY                  32	/* 32 octets == 256 bits, Redefine for WPA */
+#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS	/* 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
+#define MAX_NUM_OF_11JCHANNELS             20	/* 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
 #define MAX_LEN_OF_SSID                 32
 #define CIPHER_TEXT_LEN                 128
 #define HASH_TABLE_SIZE                 256
-#define MAX_VIE_LEN                     1024	// New for WPA cipher suite variable IE sizes.
+#define MAX_VIE_LEN                     1024	/* New for WPA cipher suite variable IE sizes. */
 #define MAX_SUPPORT_MCS             32
 #define MAX_NUM_OF_BBP_LATCH             140
 
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID		1	// in infra mode, always put bssid with this WCID
+/*============================================================ */
+/* ASIC WCID Table definition. */
+/*============================================================ */
+#define BSSID_WCID		1	/* in infra mode, always put bssid with this WCID */
 #define MCAST_WCID	0x0
 #define BSS0Mcast_WCID	0x0
 #define BSS1Mcast_WCID	0xf8
@@ -406,7 +406,7 @@
 
 #define MAX_NUM_OF_ACL_LIST				MAX_NUMBER_OF_ACL
 
-#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC	// if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC	/* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
 
 #if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
 #error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
@@ -419,38 +419,38 @@
 
 #define NUM_OF_TID			8
 #define MAX_AID_BA                    4
-#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	//   (NUM_OF_TID*MAX_AID_BA + 32)        //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
+#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	/*   (NUM_OF_TID*MAX_AID_BA + 32)        //Block ACK recipient */
+#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	/*   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator */
 #define MAX_LEN_OF_BSS_TABLE             64
 #define MAX_REORDERING_MPDU_NUM			 512
 
-// key related definitions
+/* key related definitions */
 #define SHARE_KEY_NUM                   4
-#define MAX_LEN_OF_SHARE_KEY            16	// byte count
-#define MAX_LEN_OF_PEER_KEY             16	// byte count
-#define PAIRWISE_KEY_NUM                64	// in MAC ASIC pairwise key table
+#define MAX_LEN_OF_SHARE_KEY            16	/* byte count */
+#define MAX_LEN_OF_PEER_KEY             16	/* byte count */
+#define PAIRWISE_KEY_NUM                64	/* in MAC ASIC pairwise key table */
 #define GROUP_KEY_NUM                   4
 #define PMK_LEN                         32
-#define WDS_PAIRWISE_KEY_OFFSET         60	// WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define	PMKID_NO                        4	// Number of PMKID saved supported
+#define WDS_PAIRWISE_KEY_OFFSET         60	/* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
+#define	PMKID_NO                        4	/* Number of PMKID saved supported */
 #define MAX_LEN_OF_MLME_BUFFER          2048
 
-// power status related definitions
+/* power status related definitions */
 #define PWR_ACTIVE                      0
 #define PWR_SAVE                        1
-#define PWR_MMPS                        2	//MIMO power save
+#define PWR_MMPS                        2	/*MIMO power save */
 
-// Auth and Assoc mode related definitions
+/* Auth and Assoc mode related definitions */
 #define AUTH_MODE_OPEN                  0x00
 #define AUTH_MODE_KEY                   0x01
 
-// BSS Type definitions
-#define BSS_ADHOC                       0	// = Ndis802_11IBSS
-#define BSS_INFRA                       1	// = Ndis802_11Infrastructure
-#define BSS_ANY                         2	// = Ndis802_11AutoUnknown
-#define BSS_MONITOR			            3	// = Ndis802_11Monitor
+/* BSS Type definitions */
+#define BSS_ADHOC                       0	/* = Ndis802_11IBSS */
+#define BSS_INFRA                       1	/* = Ndis802_11Infrastructure */
+#define BSS_ANY                         2	/* = Ndis802_11AutoUnknown */
+#define BSS_MONITOR			            3	/* = Ndis802_11Monitor */
 
-// Reason code definitions
+/* Reason code definitions */
 #define REASON_RESERVED                 0
 #define REASON_UNSPECIFY                1
 #define REASON_NO_LONGER_VALID          2
@@ -485,7 +485,7 @@
 #define REASON_QOS_REQUEST_TIMEOUT        39
 #define REASON_QOS_CIPHER_NOT_SUPPORT     45
 
-// Status code definitions
+/* Status code definitions */
 #define MLME_SUCCESS                    0
 #define MLME_UNSPECIFY_FAIL             1
 #define MLME_CANNOT_SUPPORT_CAP         10
@@ -517,7 +517,7 @@
 #define MLME_STATE_MACHINE_REJECT       0x53
 #define MLME_MAC_TABLE_FAIL             0x54
 
-// IE code
+/* IE code */
 #define IE_SSID                         0
 #define IE_SUPP_RATES                   1
 #define IE_FH_PARM                      2
@@ -525,83 +525,83 @@
 #define IE_CF_PARM                      4
 #define IE_TIM                          5
 #define IE_IBSS_PARM                    6
-#define IE_COUNTRY                      7	// 802.11d
-#define IE_802_11D_REQUEST              10	// 802.11d
-#define IE_QBSS_LOAD                    11	// 802.11e d9
-#define IE_EDCA_PARAMETER               12	// 802.11e d9
-#define IE_TSPEC                        13	// 802.11e d9
-#define IE_TCLAS                        14	// 802.11e d9
-#define IE_SCHEDULE                     15	// 802.11e d9
+#define IE_COUNTRY                      7	/* 802.11d */
+#define IE_802_11D_REQUEST              10	/* 802.11d */
+#define IE_QBSS_LOAD                    11	/* 802.11e d9 */
+#define IE_EDCA_PARAMETER               12	/* 802.11e d9 */
+#define IE_TSPEC                        13	/* 802.11e d9 */
+#define IE_TCLAS                        14	/* 802.11e d9 */
+#define IE_SCHEDULE                     15	/* 802.11e d9 */
 #define IE_CHALLENGE_TEXT               16
-#define IE_POWER_CONSTRAINT             32	// 802.11h d3.3
-#define IE_POWER_CAPABILITY             33	// 802.11h d3.3
-#define IE_TPC_REQUEST                  34	// 802.11h d3.3
-#define IE_TPC_REPORT                   35	// 802.11h d3.3
-#define IE_SUPP_CHANNELS                36	// 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37	// 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST          38	// 802.11h d3.3
-#define IE_MEASUREMENT_REPORT           39	// 802.11h d3.3
-#define IE_QUIET                        40	// 802.11h d3.3
-#define IE_IBSS_DFS                     41	// 802.11h d3.3
-#define IE_ERP                          42	// 802.11g
-#define IE_TS_DELAY                     43	// 802.11e d9
-#define IE_TCLAS_PROCESSING             44	// 802.11e d9
-#define IE_QOS_CAPABILITY               46	// 802.11e d6
-#define IE_HT_CAP                       45	// 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT			51	// 802.11k d6
-#define IE_HT_CAP2                         52	// 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN                          48	// 802.11i d3.0
-#define IE_WPA2                         48	// WPA2
-#define IE_EXT_SUPP_RATES               50	// 802.11g
-#define IE_SUPP_REG_CLASS               59	// 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	// 802.11n
-#define IE_ADD_HT                         61	// 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2                        53	// 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
+#define IE_POWER_CONSTRAINT             32	/* 802.11h d3.3 */
+#define IE_POWER_CAPABILITY             33	/* 802.11h d3.3 */
+#define IE_TPC_REQUEST                  34	/* 802.11h d3.3 */
+#define IE_TPC_REPORT                   35	/* 802.11h d3.3 */
+#define IE_SUPP_CHANNELS                36	/* 802.11h d3.3 */
+#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37	/* 802.11h d3.3 */
+#define IE_MEASUREMENT_REQUEST          38	/* 802.11h d3.3 */
+#define IE_MEASUREMENT_REPORT           39	/* 802.11h d3.3 */
+#define IE_QUIET                        40	/* 802.11h d3.3 */
+#define IE_IBSS_DFS                     41	/* 802.11h d3.3 */
+#define IE_ERP                          42	/* 802.11g */
+#define IE_TS_DELAY                     43	/* 802.11e d9 */
+#define IE_TCLAS_PROCESSING             44	/* 802.11e d9 */
+#define IE_QOS_CAPABILITY               46	/* 802.11e d6 */
+#define IE_HT_CAP                       45	/* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_AP_CHANNEL_REPORT			51	/* 802.11k d6 */
+#define IE_HT_CAP2                         52	/* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_RSN                          48	/* 802.11i d3.0 */
+#define IE_WPA2                         48	/* WPA2 */
+#define IE_EXT_SUPP_RATES               50	/* 802.11g */
+#define IE_SUPP_REG_CLASS               59	/* 802.11y. Supported regulatory classes. */
+#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	/* 802.11n */
+#define IE_ADD_HT                         61	/* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
+#define IE_ADD_HT2                        53	/* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
 
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03        Secondary Channel Offset element
-#define IE_WAPI							68	// WAPI information element
-#define IE_2040_BSS_COEXIST               72	// 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT     73	// 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM           74	// 802.11n D3.03
-#define IE_EXT_CAPABILITY                127	// 802.11n D3.03
+/* For 802.11n D3.03 */
+/*#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet */
+#define IE_SECONDARY_CH_OFFSET		62	/* 802.11n D3.03        Secondary Channel Offset element */
+#define IE_WAPI							68	/* WAPI information element */
+#define IE_2040_BSS_COEXIST               72	/* 802.11n D3.0.3 */
+#define IE_2040_BSS_INTOLERANT_REPORT     73	/* 802.11n D3.03 */
+#define IE_OVERLAPBSS_SCAN_PARM           74	/* 802.11n D3.03 */
+#define IE_EXT_CAPABILITY                127	/* 802.11n D3.03 */
 
-#define IE_WPA                          221	// WPA
-#define IE_VENDOR_SPECIFIC              221	// Wifi WMM (WME)
+#define IE_WPA                          221	/* WPA */
+#define IE_VENDOR_SPECIFIC              221	/* Wifi WMM (WME) */
 
-#define OUI_BROADCOM_HT              51	//
-#define OUI_BROADCOM_HTADD              52	//
-#define OUI_PREN_HT_CAP              51	//
-#define OUI_PREN_ADD_HT              52	//
+#define OUI_BROADCOM_HT              51	/* */
+#define OUI_BROADCOM_HTADD              52	/* */
+#define OUI_PREN_HT_CAP              51	/* */
+#define OUI_PREN_ADD_HT              52	/* */
 
-// CCX information
-#define IE_AIRONET_CKIP                 133	// CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER                  150	// CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY       221	// CCX 2.0
+/* CCX information */
+#define IE_AIRONET_CKIP                 133	/* CCX1.0 ID 85H for CKIP */
+#define IE_AP_TX_POWER                  150	/* CCX 2.0 for AP transmit power */
+#define IE_MEASUREMENT_CAPABILITY       221	/* CCX 2.0 */
 #define IE_CCX_V2                       221
-#define IE_AIRONET_IPADDRESS            149	// CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC          156	// CCX ID 9CH for CCKM Reassociation Request element
+#define IE_AIRONET_IPADDRESS            149	/* CCX ID 95H for IP Address */
+#define IE_AIRONET_CCKMREASSOC          156	/* CCX ID 9CH for CCKM Reassociation Request element */
 #define CKIP_NEGOTIATION_LENGTH         30
 #define AIRONET_IPADDRESS_LENGTH        10
 #define AIRONET_CCKMREASSOC_LENGTH      24
 
-// ========================================================
-// MLME state machine definition
-// ========================================================
+/* ======================================================== */
+/* MLME state machine definition */
+/* ======================================================== */
 
-// STA MLME state mahcines
+/* STA MLME state mahcines */
 #define ASSOC_STATE_MACHINE             1
 #define AUTH_STATE_MACHINE              2
 #define AUTH_RSP_STATE_MACHINE          3
 #define SYNC_STATE_MACHINE              4
 #define MLME_CNTL_STATE_MACHINE         5
 #define WPA_PSK_STATE_MACHINE           6
-//#define LEAP_STATE_MACHINE              7
+/*#define LEAP_STATE_MACHINE              7 */
 #define AIRONET_STATE_MACHINE           8
 #define ACTION_STATE_MACHINE           9
 
-// AP MLME state machines
+/* AP MLME state machines */
 #define AP_ASSOC_STATE_MACHINE          11
 #define AP_AUTH_STATE_MACHINE           12
 #define AP_SYNC_STATE_MACHINE           14
@@ -611,9 +611,9 @@
 
 #define WPA_STATE_MACHINE			23
 
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* STA's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
 #define CNTL_IDLE                       0
 #define CNTL_WAIT_DISASSOC              1
 #define CNTL_WAIT_JOIN                  2
@@ -626,7 +626,7 @@
 #define CNTL_WAIT_OID_DISASSOC          9
 #ifdef RTMP_MAC_USB
 #define CNTL_WAIT_SCAN_FOR_CONNECT      10
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #define MT2_ASSOC_CONF                  34
 #define MT2_AUTH_CONF                   35
@@ -645,9 +645,9 @@
 
 #define CNTL_FUNC_SIZE                  1
 
-//
-// STA's ASSOC state machine: states, events, total function #
-//
+/* */
+/* STA's ASSOC state machine: states, events, total function # */
+/* */
 #define ASSOC_IDLE                      0
 #define ASSOC_WAIT_RSP                  1
 #define REASSOC_WAIT_RSP                2
@@ -670,16 +670,16 @@
 
 #define ASSOC_FUNC_SIZE                 (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
 
-//
-// ACT state machine: states, events, total function #
-//
+/* */
+/* ACT state machine: states, events, total function # */
+/* */
 #define ACT_IDLE                      0
 #define MAX_ACT_STATE                 1
 
 #define ACT_MACHINE_BASE              0
 
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
+/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */
+/*Category */
 #define MT2_PEER_SPECTRUM_CATE              0
 #define MT2_PEER_QOS_CATE              1
 #define MT2_PEER_DLS_CATE             2
@@ -687,7 +687,7 @@
 #define MT2_PEER_PUBLIC_CATE             4
 #define MT2_PEER_RM_CATE             5
 /* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */
-#define MT2_PEER_HT_CATE             7	//      7.4.7
+#define MT2_PEER_HT_CATE             7	/*      7.4.7 */
 #define MAX_PEER_CATE_MSG                   7
 
 #define MT2_MLME_ADD_BA_CATE             8
@@ -698,7 +698,7 @@
 #define MT2_ACT_INVALID             13
 #define MAX_ACT_MSG                   14
 
-//Category field
+/*Category field */
 #define CATEGORY_SPECTRUM		0
 #define CATEGORY_QOS			1
 #define CATEGORY_DLS			2
@@ -707,35 +707,35 @@
 #define CATEGORY_RM			5
 #define CATEGORY_HT			7
 
-// DLS Action frame definition
+/* DLS Action frame definition */
 #define ACTION_DLS_REQUEST			0
 #define ACTION_DLS_RESPONSE			1
 #define ACTION_DLS_TEARDOWN			2
 
-//Spectrum  Action field value 802.11h 7.4.1
-#define SPEC_MRQ	0	// Request
-#define SPEC_MRP	1	//Report
+/*Spectrum  Action field value 802.11h 7.4.1 */
+#define SPEC_MRQ	0	/* Request */
+#define SPEC_MRP	1	/*Report */
 #define SPEC_TPCRQ	2
 #define SPEC_TPCRP	3
 #define SPEC_CHANNEL_SWITCH	4
 
-//BA  Action field value
+/*BA  Action field value */
 #define ADDBA_REQ	0
 #define ADDBA_RESP	1
 #define DELBA   2
 
-//Public's  Action field value in Public Category.  Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST				0	// 11n
-#define ACTION_DSE_ENABLEMENT					1	// 11y D9.0
-#define ACTION_DSE_DEENABLEMENT				2	// 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE	3	// 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ			5	// 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT		6	// 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION		7	// 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT			8	// 11y D9.0
+/*Public's  Action field value in Public Category.  Some in 802.11y and some in 11n */
+#define ACTION_BSS_2040_COEXIST				0	/* 11n */
+#define ACTION_DSE_ENABLEMENT					1	/* 11y D9.0 */
+#define ACTION_DSE_DEENABLEMENT				2	/* 11y D9.0 */
+#define ACTION_DSE_REG_LOCATION_ANNOUNCE	3	/* 11y D9.0 */
+#define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	/* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REQ			5	/* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REPORT		6	/* 11y D9.0 */
+#define ACTION_MEASUREMENT_PILOT_ACTION		7	/* 11y D9.0 */
+#define ACTION_DSE_POWER_CONSTRAINT			8	/* 11y D9.0 */
 
-//HT  Action field value
+/*HT  Action field value */
 #define NOTIFY_BW_ACTION				0
 #define SMPS_ACTION						1
 #define PSMP_ACTION   					2
@@ -747,9 +747,9 @@
 #define HT_INFO_EXCHANGE				8
 
 #define ACT_FUNC_SIZE                 (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
+/* */
+/* STA's AUTHENTICATION state machine: states, evvents, total function # */
+/* */
 #define AUTH_REQ_IDLE                   0
 #define AUTH_WAIT_SEQ2                  1
 #define AUTH_WAIT_SEQ4                  2
@@ -763,9 +763,9 @@
 
 #define AUTH_FUNC_SIZE                  (MAX_AUTH_STATE * MAX_AUTH_MSG)
 
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
+/* */
+/* STA's AUTH_RSP state machine: states, events, total function # */
+/* */
 #define AUTH_RSP_IDLE                   0
 #define AUTH_RSP_WAIT_CHAL              1
 #define MAX_AUTH_RSP_STATE              2
@@ -778,10 +778,10 @@
 
 #define AUTH_RSP_FUNC_SIZE              (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
 
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE                       0	// merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
+/* */
+/* STA's SYNC state machine: states, events, total function # */
+/* */
+#define SYNC_IDLE                       0	/* merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state */
 #define JOIN_WAIT_BEACON                1
 #define SCAN_LISTEN                     2
 #define MAX_SYNC_STATE                  3
@@ -801,7 +801,7 @@
 
 #define SYNC_FUNC_SIZE                  (MAX_SYNC_STATE * MAX_SYNC_MSG)
 
-//Messages for the DLS state machine
+/*Messages for the DLS state machine */
 #define DLS_IDLE						0
 #define MAX_DLS_STATE					1
 
@@ -815,18 +815,18 @@
 
 #define DLS_FUNC_SIZE					(MAX_DLS_STATE * MAX_DLS_MSG)
 
-//
-// WSC State machine: states, events, total function #
-//
+/* */
+/* WSC State machine: states, events, total function # */
+/* */
 
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* AP's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
 #define AP_CNTL_FUNC_SIZE               1
 
-//
-// AP's ASSOC state machine: states, events, total function #
-//
+/* */
+/* AP's ASSOC state machine: states, events, total function # */
+/* */
 #define AP_ASSOC_IDLE                   0
 #define AP_MAX_ASSOC_STATE              1
 
@@ -840,9 +840,9 @@
 
 #define AP_ASSOC_FUNC_SIZE              (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
 
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
+/* */
+/* AP's AUTHENTICATION state machine: states, events, total function # */
+/* */
 #define AP_AUTH_REQ_IDLE                0
 #define AP_MAX_AUTH_STATE               1
 
@@ -856,9 +856,9 @@
 
 #define AP_AUTH_FUNC_SIZE               (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
 
-//
-// AP's SYNC state machine: states, events, total function #
-//
+/* */
+/* AP's SYNC state machine: states, events, total function # */
+/* */
 #define AP_SYNC_IDLE                    0
 #define AP_SCAN_LISTEN					1
 #define AP_MAX_SYNC_STATE               2
@@ -874,9 +874,9 @@
 
 #define AP_SYNC_FUNC_SIZE               (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
 
-//
-// Common WPA state machine: states, events, total function #
-//
+/* */
+/* Common WPA state machine: states, events, total function # */
+/* */
 #define WPA_PTK                      0
 #define MAX_WPA_PTK_STATE            1
 
@@ -890,14 +890,14 @@
 
 #define WPA_FUNC_SIZE                (MAX_WPA_PTK_STATE * MAX_WPA_MSG)
 
-// =============================================================================
+/* ============================================================================= */
 
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
+/* value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header */
 #define BTYPE_MGMT                  0
 #define BTYPE_CNTL                  1
 #define BTYPE_DATA                  2
 
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
 #define SUBTYPE_ASSOC_REQ           0
 #define SUBTYPE_ASSOC_RSP           1
 #define SUBTYPE_REASSOC_REQ         2
@@ -912,7 +912,7 @@
 #define SUBTYPE_ACTION              13
 #define SUBTYPE_ACTION_NO_ACK              14
 
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
 #define SUBTYPE_WRAPPER       	7
 #define SUBTYPE_BLOCK_ACK_REQ       8
 #define SUBTYPE_BLOCK_ACK           9
@@ -923,7 +923,7 @@
 #define SUBTYPE_CFEND               14
 #define SUBTYPE_CFEND_CFACK         15
 
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
 #define SUBTYPE_DATA                0
 #define SUBTYPE_DATA_CFACK          1
 #define SUBTYPE_DATA_CFPOLL         2
@@ -941,15 +941,15 @@
 #define SUBTYPE_QOS_CFPOLL          14
 #define SUBTYPE_QOS_CFACK_CFPOLL    15
 
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK                  0x00	// b6:5 = 00
-#define NO_ACK                      0x20	// b6:5 = 01
-#define NO_EXPLICIT_ACK             0x40	// b6:5 = 10
-#define BLOCK_ACK                   0x60	// b6:5 = 11
+/* ACK policy of QOS Control field bit 6:5 */
+#define NORMAL_ACK                  0x00	/* b6:5 = 00 */
+#define NO_ACK                      0x20	/* b6:5 = 01 */
+#define NO_EXPLICIT_ACK             0x40	/* b6:5 = 10 */
+#define BLOCK_ACK                   0x60	/* b6:5 = 11 */
 
-//
-// rtmp_data.c use these definition
-//
+/* */
+/* rtmp_data.c use these definition */
+/* */
 #define LENGTH_802_11               24
 #define LENGTH_802_11_AND_H         30
 #define LENGTH_802_11_CRC_H         34
@@ -965,40 +965,40 @@
 #define LENGTH_802_3_NO_TYPE		12
 #define LENGTH_802_1Q				4	/* VLAN related */
 
-// STA_CSR4.field.TxResult
+/* STA_CSR4.field.TxResult */
 #define TX_RESULT_SUCCESS           0
 #define TX_RESULT_ZERO_LENGTH       1
 #define TX_RESULT_UNDER_RUN         2
 #define TX_RESULT_OHY_ERROR         4
 #define TX_RESULT_RETRY_FAIL        6
 
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
+/* All PHY rate summary in TXD */
+/* Preamble MODE in TxD */
 #define MODE_CCK	0
 #define MODE_OFDM   1
 #define MODE_HTMIX	2
 #define MODE_HTGREENFIELD	3
 
-// MCS for CCK.  BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1                      0	// long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
+/* MCS for CCK.  BW.SGI.STBC are reserved */
+#define MCS_LONGP_RATE_1                      0	/* long preamble CCK 1Mbps */
+#define MCS_LONGP_RATE_2                      1	/* long preamble CCK 1Mbps */
 #define MCS_LONGP_RATE_5_5                    2
 #define MCS_LONGP_RATE_11                     3
-#define MCS_SHORTP_RATE_1                      4	// long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2                      5	// short preamble CCK 2Mbps
+#define MCS_SHORTP_RATE_1                      4	/* long preamble CCK 1Mbps. short is forbidden in 1Mbps */
+#define MCS_SHORTP_RATE_2                      5	/* short preamble CCK 2Mbps */
 #define MCS_SHORTP_RATE_5_5                    6
 #define MCS_SHORTP_RATE_11                     7
-// To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
-#define MCS_RATE_6                      0	// legacy OFDM
-#define MCS_RATE_9                      1	// OFDM
-#define MCS_RATE_12                     2	// OFDM
-#define MCS_RATE_18                     3	// OFDM
-#define MCS_RATE_24                     4	// OFDM
-#define MCS_RATE_36                     5	// OFDM
-#define MCS_RATE_48                     6	// OFDM
-#define MCS_RATE_54                     7	// OFDM
-// HT
-#define MCS_0		0	// 1S
+/* To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved */
+#define MCS_RATE_6                      0	/* legacy OFDM */
+#define MCS_RATE_9                      1	/* OFDM */
+#define MCS_RATE_12                     2	/* OFDM */
+#define MCS_RATE_18                     3	/* OFDM */
+#define MCS_RATE_24                     4	/* OFDM */
+#define MCS_RATE_36                     5	/* OFDM */
+#define MCS_RATE_48                     6	/* OFDM */
+#define MCS_RATE_54                     7	/* OFDM */
+/* HT */
+#define MCS_0		0	/* 1S */
 #define MCS_1		1
 #define MCS_2		2
 #define MCS_3		3
@@ -1006,7 +1006,7 @@
 #define MCS_5		5
 #define MCS_6		6
 #define MCS_7		7
-#define MCS_8		8	// 2S
+#define MCS_8		8	/* 2S */
 #define MCS_9		9
 #define MCS_10		10
 #define MCS_11		11
@@ -1014,7 +1014,7 @@
 #define MCS_13		13
 #define MCS_14		14
 #define MCS_15		15
-#define MCS_16		16	// 3*3
+#define MCS_16		16	/* 3*3 */
 #define MCS_17		17
 #define MCS_18		18
 #define MCS_19		19
@@ -1025,48 +1025,48 @@
 #define MCS_32		32
 #define MCS_AUTO		33
 
-// OID_HTPHYMODE
-// MODE
+/* OID_HTPHYMODE */
+/* MODE */
 #define HTMODE_MM	0
 #define HTMODE_GF	1
 
-// Fixed Tx MODE - HT, CCK or OFDM
+/* Fixed Tx MODE - HT, CCK or OFDM */
 #define FIXED_TXMODE_HT		0
 #define FIXED_TXMODE_CCK	1
 #define FIXED_TXMODE_OFDM 	2
-// BW
+/* BW */
 #define BW_20		BAND_WIDTH_20
 #define BW_40		BAND_WIDTH_40
 #define BW_BOTH		BAND_WIDTH_BOTH
-#define BW_10		BAND_WIDTH_10	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
+#define BW_10		BAND_WIDTH_10	/* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */
 
-// SHORTGI
-#define GI_400		GAP_INTERVAL_400	// only support in HT mode
+/* SHORTGI */
+#define GI_400		GAP_INTERVAL_400	/* only support in HT mode */
 #define GI_BOTH		GAP_INTERVAL_BOTH
 #define GI_800		GAP_INTERVAL_800
-// STBC
+/* STBC */
 #define STBC_NONE	0
-#define STBC_USE	1	// limited use in rt2860b phy
-#define RXSTBC_ONE	1	// rx support of one spatial stream
-#define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
-#define RXSTBC_THR	3	// rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE	0	// not support mcs feedback /
-#define MCSFBK_RSV	1	// reserved
-#define MCSFBK_UNSOLICIT	2	// only support unsolict mcs feedback
-#define MCSFBK_MRQ	3	// response to both MRQ and unsolict mcs feedback
+#define STBC_USE	1	/* limited use in rt2860b phy */
+#define RXSTBC_ONE	1	/* rx support of one spatial stream */
+#define RXSTBC_TWO	2	/* rx support of 1 and 2 spatial stream */
+#define RXSTBC_THR	3	/* rx support of 1~3 spatial stream */
+/* MCS FEEDBACK */
+#define MCSFBK_NONE	0	/* not support mcs feedback / */
+#define MCSFBK_RSV	1	/* reserved */
+#define MCSFBK_UNSOLICIT	2	/* only support unsolict mcs feedback */
+#define MCSFBK_MRQ	3	/* response to both MRQ and unsolict mcs feedback */
 
-// MIMO power safe
+/* MIMO power safe */
 #define	MMPS_STATIC	0
 #define	MMPS_DYNAMIC		1
 #define   MMPS_RSV		2
 #define MMPS_ENABLE		3
 
-// A-MSDU size
+/* A-MSDU size */
 #define	AMSDU_0	0
 #define	AMSDU_1		1
 
-// MCS use 7 bits
+/* MCS use 7 bits */
 #define TXRATEMIMO		0x80
 #define TXRATEMCS		0x7F
 #define TXRATEOFDM		0x7F
@@ -1074,77 +1074,77 @@
 #define RATE_2                      1
 #define RATE_5_5                    2
 #define RATE_11                     3
-#define RATE_6                      4	// OFDM
-#define RATE_9                      5	// OFDM
-#define RATE_12                     6	// OFDM
-#define RATE_18                     7	// OFDM
-#define RATE_24                     8	// OFDM
-#define RATE_36                     9	// OFDM
-#define RATE_48                     10	// OFDM
-#define RATE_54                     11	// OFDM
+#define RATE_6                      4	/* OFDM */
+#define RATE_9                      5	/* OFDM */
+#define RATE_12                     6	/* OFDM */
+#define RATE_18                     7	/* OFDM */
+#define RATE_24                     8	/* OFDM */
+#define RATE_36                     9	/* OFDM */
+#define RATE_48                     10	/* OFDM */
+#define RATE_54                     11	/* OFDM */
 #define RATE_FIRST_OFDM_RATE        RATE_6
 #define RATE_LAST_OFDM_RATE        	RATE_54
-#define RATE_6_5                    12	// HT mix
-#define RATE_13                     13	// HT mix
-#define RATE_19_5                   14	// HT mix
-#define RATE_26                     15	// HT mix
-#define RATE_39                     16	// HT mix
-#define RATE_52                     17	// HT mix
-#define RATE_58_5                   18	// HT mix
-#define RATE_65                     19	// HT mix
-#define RATE_78                     20	// HT mix
-#define RATE_104                    21	// HT mix
-#define RATE_117                    22	// HT mix
-#define RATE_130                    23	// HT mix
-//#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
+#define RATE_6_5                    12	/* HT mix */
+#define RATE_13                     13	/* HT mix */
+#define RATE_19_5                   14	/* HT mix */
+#define RATE_26                     15	/* HT mix */
+#define RATE_39                     16	/* HT mix */
+#define RATE_52                     17	/* HT mix */
+#define RATE_58_5                   18	/* HT mix */
+#define RATE_65                     19	/* HT mix */
+#define RATE_78                     20	/* HT mix */
+#define RATE_104                    21	/* HT mix */
+#define RATE_117                    22	/* HT mix */
+#define RATE_130                    23	/* HT mix */
+/*#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only */
 #define HTRATE_0                      12
 #define RATE_FIRST_MM_RATE        HTRATE_0
 #define RATE_FIRST_HT_RATE        HTRATE_0
 #define RATE_LAST_HT_RATE        HTRATE_0
 
-// pTxWI->txop
-#define IFS_HTTXOP                 0	// The txop will be handles by ASIC.
+/* pTxWI->txop */
+#define IFS_HTTXOP                 0	/* The txop will be handles by ASIC. */
 #define IFS_PIFS                    1
 #define IFS_SIFS                    2
 #define IFS_BACKOFF                 3
 
-// pTxD->RetryMode
+/* pTxD->RetryMode */
 #define LONG_RETRY                  1
 #define SHORT_RETRY                 0
 
-// Country Region definition
+/* Country Region definition */
 #define REGION_MINIMUM_BG_BAND            0
-#define REGION_0_BG_BAND                  0	// 1-11
-#define REGION_1_BG_BAND                  1	// 1-13
-#define REGION_2_BG_BAND                  2	// 10-11
-#define REGION_3_BG_BAND                  3	// 10-13
-#define REGION_4_BG_BAND                  4	// 14
-#define REGION_5_BG_BAND                  5	// 1-14
-#define REGION_6_BG_BAND                  6	// 3-9
-#define REGION_7_BG_BAND                  7	// 5-13
-#define REGION_31_BG_BAND                 31	// 5-13
+#define REGION_0_BG_BAND                  0	/* 1-11 */
+#define REGION_1_BG_BAND                  1	/* 1-13 */
+#define REGION_2_BG_BAND                  2	/* 10-11 */
+#define REGION_3_BG_BAND                  3	/* 10-13 */
+#define REGION_4_BG_BAND                  4	/* 14 */
+#define REGION_5_BG_BAND                  5	/* 1-14 */
+#define REGION_6_BG_BAND                  6	/* 3-9 */
+#define REGION_7_BG_BAND                  7	/* 5-13 */
+#define REGION_31_BG_BAND                 31	/* 5-13 */
 #define REGION_MAXIMUM_BG_BAND            7
 
 #define REGION_MINIMUM_A_BAND             0
-#define REGION_0_A_BAND                   0	// 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND                   1	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND                   2	// 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND                   3	// 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND                   4	// 149, 153, 157, 161, 165
-#define REGION_5_A_BAND                   5	// 149, 153, 157, 161
-#define REGION_6_A_BAND                   6	// 36, 40, 44, 48
-#define REGION_7_A_BAND                   7	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173
-#define REGION_8_A_BAND                   8	// 52, 56, 60, 64
-#define REGION_9_A_BAND                   9	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND                  10	// 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND                  11	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_12_A_BAND                  12	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_13_A_BAND                  13	// 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
-#define REGION_14_A_BAND                  14	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
-#define REGION_15_A_BAND                  15	// 149, 153, 157, 161, 165, 169, 173
+#define REGION_0_A_BAND                   0	/* 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 */
+#define REGION_1_A_BAND                   1	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_2_A_BAND                   2	/* 36, 40, 44, 48, 52, 56, 60, 64 */
+#define REGION_3_A_BAND                   3	/* 52, 56, 60, 64, 149, 153, 157, 161 */
+#define REGION_4_A_BAND                   4	/* 149, 153, 157, 161, 165 */
+#define REGION_5_A_BAND                   5	/* 149, 153, 157, 161 */
+#define REGION_6_A_BAND                   6	/* 36, 40, 44, 48 */
+#define REGION_7_A_BAND                   7	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 */
+#define REGION_8_A_BAND                   8	/* 52, 56, 60, 64 */
+#define REGION_9_A_BAND                   9	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_10_A_BAND                  10	/* 36, 40, 44, 48, 149, 153, 157, 161, 165 */
+#define REGION_11_A_BAND                  11	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 */
+#define REGION_12_A_BAND                  12	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_13_A_BAND                  13	/* 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 */
+#define REGION_14_A_BAND                  14	/* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_15_A_BAND                  15	/* 149, 153, 157, 161, 165, 169, 173 */
 #define REGION_MAXIMUM_A_BAND             15
 
-// pTxD->CipherAlg
+/* pTxD->CipherAlg */
 #define CIPHER_NONE                 0
 #define CIPHER_WEP64                1
 #define CIPHER_WEP128               2
@@ -1152,10 +1152,10 @@
 #define CIPHER_AES                  4
 #define CIPHER_CKIP64               5
 #define CIPHER_CKIP128              6
-#define CIPHER_TKIP_NO_MIC          7	// MIC appended by driver: not a valid value in hardware key table
+#define CIPHER_TKIP_NO_MIC          7	/* MIC appended by driver: not a valid value in hardware key table */
 #define CIPHER_SMS4					8
 
-// LED Status.
+/* LED Status. */
 #define LED_LINK_DOWN               0
 #define LED_LINK_UP                 1
 #define LED_RADIO_OFF               2
@@ -1165,35 +1165,35 @@
 #define LED_ON_SITE_SURVEY          6
 #define LED_POWER_UP                7
 
-// value domain of pAd->LedCntl.LedMode and E2PROM
+/* value domain of pAd->LedCntl.LedMode and E2PROM */
 #define LED_MODE_DEFAULT            0
 #define LED_MODE_TWO_LED			1
-//#define LED_MODE_SIGNAL_STREGTH               8  // EEPROM define =8
-#define LED_MODE_SIGNAL_STREGTH		0x40	// EEPROM define = 64
+/*#define LED_MODE_SIGNAL_STREGTH               8  // EEPROM define =8 */
+#define LED_MODE_SIGNAL_STREGTH		0x40	/* EEPROM define = 64 */
 
-// RC4 init value, used fro WEP & TKIP
+/* RC4 init value, used fro WEP & TKIP */
 #define PPPINITFCS32                0xffffffff	/* Initial FCS value */
 
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
+/* value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition */
 #define WPA_802_1X_PORT_SECURED     1
 #define WPA_802_1X_PORT_NOT_SECURED 2
 
 #define PAIRWISE_KEY                1
 #define GROUP_KEY                   2
 
-//definition of DRS
+/*definition of DRS */
 #define MAX_STEP_OF_TX_RATE_SWITCH	32
 
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
+/* pre-allocated free NDIS PACKET/BUFFER poll for internal usage */
 #define MAX_NUM_OF_FREE_NDIS_PACKET 128
 
-//Block ACK
+/*Block ACK */
 #define MAX_TX_REORDERBUF   64
 #define MAX_RX_REORDERBUF   64
 #define DEFAULT_TX_TIMEOUT   30
 #define DEFAULT_RX_TIMEOUT   30
 
-// definition of Recipient or Originator
+/* definition of Recipient or Originator */
 #define I_RECIPIENT                  TRUE
 #define I_ORIGINATOR                   FALSE
 
@@ -1201,43 +1201,43 @@
 #define DEFAULT_RF_TX_POWER         5
 
 #define MAX_INI_BUFFER_SIZE			4096
-#define MAX_PARAM_BUFFER_SIZE		(2048)	// enough for ACL (18*64)
-											//18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
-											//64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
+#define MAX_PARAM_BUFFER_SIZE		(2048)	/* enough for ACL (18*64) */
+											/*18 : the length of Mac address acceptable format "01:02:03:04:05:06;") */
+											/*64 : MAX_NUM_OF_ACL_LIST */
+/* definition of pAd->OpMode */
 #define OPMODE_STA                  0
 #define OPMODE_AP                   1
-//#define OPMODE_L3_BRG               2       // as AP and STA at the same time
+/*#define OPMODE_L3_BRG               2       // as AP and STA at the same time */
 
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT    0	// Log = "hh:mm:ss   Restart Access Point"
-#define EVENT_ASSOCIATED            1	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED         2	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT              3	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
+/* ========================= AP rtmp_def.h =========================== */
+/* value domain for pAd->EventTab.Log[].Event */
+#define EVENT_RESET_ACCESS_POINT    0	/* Log = "hh:mm:ss   Restart Access Point" */
+#define EVENT_ASSOCIATED            1	/* Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated" */
+#define EVENT_DISASSOCIATED         2	/* Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS" */
+#define EVENT_AGED_OUT              3	/* Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS" */
 #define EVENT_COUNTER_M             4
 #define EVENT_INVALID_PSK           5
 #define EVENT_MAX_EVENT_TYPE        6
-// ==== end of AP rtmp_def.h ============
+/* ==== end of AP rtmp_def.h ============ */
 
-// definition RSSI Number
+/* definition RSSI Number */
 #define RSSI_0					0
 #define RSSI_1					1
 #define RSSI_2					2
 
-// definition of radar detection
-#define RD_NORMAL_MODE				0	// Not found radar signal
-#define RD_SWITCHING_MODE			1	// Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE				2	// After channel switch, need to be silence a while to ensure radar not found
+/* definition of radar detection */
+#define RD_NORMAL_MODE				0	/* Not found radar signal */
+#define RD_SWITCHING_MODE			1	/* Found radar signal, and doing channel switch */
+#define RD_SILENCE_MODE				2	/* After channel switch, need to be silence a while to ensure radar not found */
 
-//Driver defined cid for mapping status and command.
+/*Driver defined cid for mapping status and command. */
 #define  SLEEPCID	0x11
 #define  WAKECID	0x22
 #define  QUERYPOWERCID	0x33
 #define  OWNERMCU	0x1
 #define  OWNERCPU	0x0
 
-// MBSSID definition
+/* MBSSID definition */
 #define ENTRY_NOT_FOUND             0xFF
 
 /* After Linux 2.6.9,
@@ -1259,15 +1259,15 @@
 #define INF_APCLI_DEV_NAME		"apcli"
 #define INF_MESH_DEV_NAME		"mesh"
 
-// WEP Key TYPE
+/* WEP Key TYPE */
 #define WEP_HEXADECIMAL_TYPE    0
 #define WEP_ASCII_TYPE          1
 
-// WIRELESS EVENTS definition
+/* WIRELESS EVENTS definition */
 /* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
 #define IW_CUSTOM_MAX_LEN				  			255	/* In bytes */
 
-// For system event - start
+/* For system event - start */
 #define	IW_SYS_EVENT_FLAG_START                     0x0200
 #define	IW_ASSOC_EVENT_FLAG                         0x0200
 #define	IW_DISASSOC_EVENT_FLAG                      0x0201
@@ -1288,12 +1288,12 @@
 #define IW_STA_LINKDOWN_EVENT_FLAG					0x0210
 #define IW_SCAN_COMPLETED_EVENT_FLAG				0x0211
 #define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG				0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
+/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */
 #define	IW_SYS_EVENT_FLAG_END                       0x0212
 #define	IW_SYS_EVENT_TYPE_NUM						(IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
+/* For system event - end */
 
-// For spoof attack event - start
+/* For spoof attack event - start */
 #define	IW_SPOOF_EVENT_FLAG_START                   0x0300
 #define IW_CONFLICT_SSID_EVENT_FLAG					0x0300
 #define IW_SPOOF_ASSOC_RESP_EVENT_FLAG				0x0301
@@ -1305,12 +1305,12 @@
 #define IW_SPOOF_DEAUTH_EVENT_FLAG					0x0307
 #define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG			0x0308
 #define IW_REPLAY_ATTACK_EVENT_FLAG					0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
+/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */
 #define	IW_SPOOF_EVENT_FLAG_END                     0x0309
 #define	IW_SPOOF_EVENT_TYPE_NUM						(IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
+/* For spoof attack event - end */
 
-// For flooding attack event - start
+/* For flooding attack event - start */
 #define	IW_FLOOD_EVENT_FLAG_START                   0x0400
 #define IW_FLOOD_AUTH_EVENT_FLAG					0x0400
 #define IW_FLOOD_ASSOC_REQ_EVENT_FLAG				0x0401
@@ -1319,18 +1319,18 @@
 #define IW_FLOOD_DISASSOC_EVENT_FLAG				0x0404
 #define IW_FLOOD_DEAUTH_EVENT_FLAG					0x0405
 #define IW_FLOOD_EAP_REQ_EVENT_FLAG					0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
+/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */
 #define	IW_FLOOD_EVENT_FLAG_END                   	0x0406
 #define	IW_FLOOD_EVENT_TYPE_NUM						(IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
+/* For flooding attack - end */
 
-// End - WIRELESS EVENTS definition
+/* End - WIRELESS EVENTS definition */
 
-// definition for DLS, kathy
+/* definition for DLS, kathy */
 #define	MAX_NUM_OF_INIT_DLS_ENTRY   1
 #define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
 
-//Block ACK, kathy
+/*Block ACK, kathy */
 #define MAX_TX_REORDERBUF		64
 #define MAX_RX_REORDERBUF		64
 #define DEFAULT_TX_TIMEOUT		30
@@ -1342,19 +1342,19 @@
 #define IW_ESSID_MAX_SIZE   		32
 #endif
 
-// For AsicRadioOff/AsicRadioOn function
+/* For AsicRadioOff/AsicRadioOn function */
 #define DOT11POWERSAVE		0
 #define GUIRADIO_OFF		1
 #define RTMP_HALT		    2
 #define GUI_IDLE_POWER_SAVE		3
-// --
+/* -- */
 
-// definition for WpaSupport flag
+/* definition for WpaSupport flag */
 #define WPA_SUPPLICANT_DISABLE				0
 #define WPA_SUPPLICANT_ENABLE				1
 #define	WPA_SUPPLICANT_ENABLE_WITH_WEB_UI	2
 
-// Endian byte swapping codes
+/* Endian byte swapping codes */
 #define SWAP16(x) \
     ((UINT16)( \
     (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
@@ -1423,4 +1423,4 @@
 	}												\
 }while(0)
 
-#endif // __RTMP_DEF_H__
+#endif /* __RTMP_DEF_H__ */
diff --git a/drivers/staging/rt2860/rtmp_dot11.h b/drivers/staging/rt2860/rtmp_dot11.h
index 051840f..fd9c720 100644
--- a/drivers/staging/rt2860/rtmp_dot11.h
+++ b/drivers/staging/rt2860/rtmp_dot11.h
@@ -30,46 +30,46 @@
 
 #include "rtmp_type.h"
 
-// 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1.
+/* 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1. */
 typedef struct PACKED {
-	UINT32 MA:1;		//management action payload exist in (QoS Null+HTC)
-	UINT32 TRQ:1;		//sounding request
-	UINT32 MRQ:1;		//MCS feedback. Request for a MCS feedback
-	UINT32 MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-	UINT32 MFS:3;		//SET to the received value of MRS. 0x111 for unsolicited MFB.
-	UINT32 MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-	UINT32 CalPos:2;	// calibration position
-	UINT32 CalSeq:2;	//calibration sequence
-	UINT32 FBKReq:2;	//feedback request
-	UINT32 CSISTEERING:2;	//CSI/ STEERING
-	UINT32 ZLFAnnouce:1;	// ZLF announcement
-	UINT32 rsv:5;		//calibration sequence
-	UINT32 ACConstraint:1;	//feedback request
-	UINT32 RDG:1;		//RDG / More PPDU
+	UINT32 MA:1;		/*management action payload exist in (QoS Null+HTC) */
+	UINT32 TRQ:1;		/*sounding request */
+	UINT32 MRQ:1;		/*MCS feedback. Request for a MCS feedback */
+	UINT32 MRSorASI:3;	/* MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110. */
+	UINT32 MFS:3;		/*SET to the received value of MRS. 0x111 for unsolicited MFB. */
+	UINT32 MFBorASC:7;	/*Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available */
+	UINT32 CalPos:2;	/* calibration position */
+	UINT32 CalSeq:2;	/*calibration sequence */
+	UINT32 FBKReq:2;	/*feedback request */
+	UINT32 CSISTEERING:2;	/*CSI/ STEERING */
+	UINT32 ZLFAnnouce:1;	/* ZLF announcement */
+	UINT32 rsv:5;		/*calibration sequence */
+	UINT32 ACConstraint:1;	/*feedback request */
+	UINT32 RDG:1;		/*RDG / More PPDU */
 } HT_CONTROL, *PHT_CONTROL;
 
-// 2-byte QOS CONTROL field
+/* 2-byte QOS CONTROL field */
 typedef struct PACKED {
 	USHORT TID:4;
 	USHORT EOSP:1;
-	USHORT AckPolicy:2;	//0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
+	USHORT AckPolicy:2;	/*0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA */
 	USHORT AMsduPresent:1;
 	USHORT Txop_QueueSize:8;
 } QOS_CONTROL, *PQOS_CONTROL;
 
-// 2-byte Frame control field
+/* 2-byte Frame control field */
 typedef struct PACKED {
-	USHORT Ver:2;		// Protocol version
-	USHORT Type:2;		// MSDU type
-	USHORT SubType:4;	// MSDU subtype
-	USHORT ToDs:1;		// To DS indication
-	USHORT FrDs:1;		// From DS indication
-	USHORT MoreFrag:1;	// More fragment bit
-	USHORT Retry:1;		// Retry status bit
-	USHORT PwrMgmt:1;	// Power management bit
-	USHORT MoreData:1;	// More data bit
-	USHORT Wep:1;		// Wep data
-	USHORT Order:1;		// Strict order expected
+	USHORT Ver:2;		/* Protocol version */
+	USHORT Type:2;		/* MSDU type */
+	USHORT SubType:4;	/* MSDU subtype */
+	USHORT ToDs:1;		/* To DS indication */
+	USHORT FrDs:1;		/* From DS indication */
+	USHORT MoreFrag:1;	/* More fragment bit */
+	USHORT Retry:1;		/* Retry status bit */
+	USHORT PwrMgmt:1;	/* Power management bit */
+	USHORT MoreData:1;	/* More data bit */
+	USHORT Wep:1;		/* Wep data */
+	USHORT Order:1;		/* Strict order expected */
 } FRAME_CONTROL, *PFRAME_CONTROL;
 
 typedef struct PACKED _HEADER_802_11 {
@@ -97,4 +97,4 @@
 	UCHAR Addr2[MAC_ADDR_LEN];
 } RTS_FRAME, *PRTS_FRAME;
 
-#endif // __DOT11_BASE_H__ //
+#endif /* __DOT11_BASE_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_iface.h b/drivers/staging/rt2860/rtmp_iface.h
index eee17d4..84b08a0 100644
--- a/drivers/staging/rt2860/rtmp_iface.h
+++ b/drivers/staging/rt2860/rtmp_iface.h
@@ -39,19 +39,19 @@
 
 #ifdef RTMP_PCI_SUPPORT
 #include "iface/rtmp_pci.h"
-#endif // RTMP_PCI_SUPPORT //
+#endif /* RTMP_PCI_SUPPORT // */
 #ifdef RTMP_USB_SUPPORT
 #include "iface/rtmp_usb.h"
-#endif // RTMP_USB_SUPPORT //
+#endif /* RTMP_USB_SUPPORT // */
 
 typedef struct _INF_PCI_CONFIG_ {
-	unsigned long CSRBaseAddress;	// PCI MMIO Base Address, all access will use
+	unsigned long CSRBaseAddress;	/* PCI MMIO Base Address, all access will use */
 	unsigned int irq_num;
 } INF_PCI_CONFIG;
 
 typedef struct _INF_USB_CONFIG_ {
-	UINT8 BulkInEpAddr;	// bulk-in endpoint address
-	UINT8 BulkOutEpAddr[6];	// bulk-out endpoint address
+	UINT8 BulkInEpAddr;	/* bulk-in endpoint address */
+	UINT8 BulkOutEpAddr[6];	/* bulk-out endpoint address */
 } INF_USB_CONFIG;
 
 typedef struct _INF_RBUS_CONFIG_ {
@@ -72,4 +72,4 @@
 	struct _INF_RBUS_CONFIG_ rbusConfig;
 } RTMP_INF_CONFIG;
 
-#endif // __RTMP_IFACE_H__ //
+#endif /* __RTMP_IFACE_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_mcu.h b/drivers/staging/rt2860/rtmp_mcu.h
index 98dea1b..1c31700 100644
--- a/drivers/staging/rt2860/rtmp_mcu.h
+++ b/drivers/staging/rt2860/rtmp_mcu.h
@@ -46,4 +46,4 @@
 			     IN UCHAR Command,
 			     IN UCHAR Token, IN UCHAR Arg0, IN UCHAR Arg1);
 
-#endif // __RTMP_MCU_H__ //
+#endif /* __RTMP_MCU_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_os.h b/drivers/staging/rt2860/rtmp_os.h
index 82b60fc..eb79e6fe 100644
--- a/drivers/staging/rt2860/rtmp_os.h
+++ b/drivers/staging/rt2860/rtmp_os.h
@@ -39,7 +39,7 @@
 
 #ifdef LINUX
 #include "rt_linux.h"
-#endif // LINUX //
+#endif /* LINUX // */
 
 /*
 	This data structure mainly strip some callback function defined in
@@ -69,7 +69,7 @@
 typedef struct _RTMP_OS_TASK_ {
 	char taskName[RTMP_OS_TASK_NAME_LEN];
 	void *priv;
-	//unsigned long         taskFlags;
+	/*unsigned long         taskFlags; */
 	RTMP_TASK_STATUS taskStatus;
 #ifndef KTHREAD_SUPPORT
 	RTMP_OS_SEM taskSema;
@@ -87,4 +87,4 @@
 int RtmpOSIRQRequest(IN PNET_DEV pNetDev);
 int RtmpOSIRQRelease(IN PNET_DEV pNetDev);
 
-#endif // __RMTP_OS_H__ //
+#endif /* __RMTP_OS_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_timer.h b/drivers/staging/rt2860/rtmp_timer.h
index 9f77197..e136576 100644
--- a/drivers/staging/rt2860/rtmp_timer.h
+++ b/drivers/staging/rt2860/rtmp_timer.h
@@ -50,29 +50,29 @@
 	rtmp_timer_##_func
 
 /* ----------------- Timer Related MARCO ---------------*/
-// In some os or chipset, we have a lot of timer functions and will read/write register,
-//   it's not allowed in Linux USB sub-system to do it ( because of sleep issue when
-//  submit to ctrl pipe). So we need a wrapper function to take care it.
+/* In some os or chipset, we have a lot of timer functions and will read/write register, */
+/*   it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */
+/*  submit to ctrl pipe). So we need a wrapper function to take care it. */
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
 typedef VOID(*RTMP_TIMER_TASK_HANDLE) (IN PVOID SystemSpecific1,
 				       IN PVOID FunctionContext,
 				       IN PVOID SystemSpecific2,
 				       IN PVOID SystemSpecific3);
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
 
 typedef struct _RALINK_TIMER_STRUCT {
-	RTMP_OS_TIMER TimerObj;	// Ndis Timer object
-	BOOLEAN Valid;		// Set to True when call RTMPInitTimer
-	BOOLEAN State;		// True if timer cancelled
-	BOOLEAN PeriodicType;	// True if timer is periodic timer
-	BOOLEAN Repeat;		// True if periodic timer
-	ULONG TimerValue;	// Timer value in milliseconds
-	ULONG cookie;		// os specific object
+	RTMP_OS_TIMER TimerObj;	/* Ndis Timer object */
+	BOOLEAN Valid;		/* Set to True when call RTMPInitTimer */
+	BOOLEAN State;		/* True if timer cancelled */
+	BOOLEAN PeriodicType;	/* True if timer is periodic timer */
+	BOOLEAN Repeat;		/* True if periodic timer */
+	ULONG TimerValue;	/* Timer value in milliseconds */
+	ULONG cookie;		/* os specific object */
 #ifdef RTMP_TIMER_TASK_SUPPORT
 	RTMP_TIMER_TASK_HANDLE handle;
 	void *pAd;
-#endif				// RTMP_TIMER_TASK_SUPPORT //
+#endif				/* RTMP_TIMER_TASK_SUPPORT // */
 } RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
@@ -113,7 +113,7 @@
 	if (pTimer->Repeat)														\
 		RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue);			\
 }
-#endif // RTMP_TIMER_TASK_SUPPORT //
+#endif /* RTMP_TIMER_TASK_SUPPORT // */
 
 DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
 DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
@@ -122,7 +122,7 @@
 DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
 #ifdef RTMP_MAC_USB
 DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 DECLARE_TIMER_FUNCTION(BeaconTimeout);
 DECLARE_TIMER_FUNCTION(ScanTimeout);
@@ -138,10 +138,10 @@
 
 #ifdef RTMP_MAC_USB
 DECLARE_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 #if defined(AP_LED) || defined(STA_LED)
 DECLARE_TIMER_FUNCTION(LedCtrlMain);
 #endif
 
-#endif // __RTMP_TIMER_H__ //
+#endif /* __RTMP_TIMER_H__ // */
diff --git a/drivers/staging/rt2860/rtmp_type.h b/drivers/staging/rt2860/rtmp_type.h
index 4900f9f..11e3591c 100644
--- a/drivers/staging/rt2860/rtmp_type.h
+++ b/drivers/staging/rt2860/rtmp_type.h
@@ -41,15 +41,15 @@
 #define PACKED  __attribute__ ((packed))
 
 #ifdef LINUX
-// Put platform dependent declaration here
-// For example, linux type definition
+/* Put platform dependent declaration here */
+/* For example, linux type definition */
 typedef unsigned char UINT8;
 typedef unsigned short UINT16;
 typedef unsigned int UINT32;
 typedef unsigned long long UINT64;
 typedef int INT32;
 typedef long long INT64;
-#endif // LINUX //
+#endif /* LINUX // */
 
 typedef unsigned char *PUINT8;
 typedef unsigned short *PUINT16;
@@ -58,7 +58,7 @@
 typedef int *PINT32;
 typedef long long *PINT64;
 
-// modified for fixing compile warning on Sigma 8634 platform
+/* modified for fixing compile warning on Sigma 8634 platform */
 typedef char STRING;
 typedef signed char CHAR;
 
@@ -72,13 +72,13 @@
 typedef unsigned short USHORT;
 typedef unsigned int UINT;
 typedef unsigned long ULONG;
-#endif // LINUX //
+#endif /* LINUX // */
 typedef unsigned long long ULONGLONG;
 
 typedef unsigned char BOOLEAN;
 #ifdef LINUX
 typedef void VOID;
-#endif // LINUX //
+#endif /* LINUX // */
 
 typedef char *PSTRING;
 typedef VOID *PVOID;
@@ -99,9 +99,9 @@
 	INT64 QuadPart;
 } LARGE_INTEGER;
 
-//
-// Register set pair for initialzation register set definition
-//
+/* */
+/* Register set pair for initialzation register set definition */
+/* */
 typedef struct _RTMP_REG_PAIR {
 	ULONG Register;
 	ULONG Value;
@@ -112,9 +112,9 @@
 	UCHAR Value;
 } REG_PAIR, *PREG_PAIR;
 
-//
-// Register set pair for initialzation register set definition
-//
+/* */
+/* Register set pair for initialzation register set definition */
+/* */
 typedef struct _RTMP_RF_REGS {
 	UCHAR Channel;
 	ULONG R1;
@@ -135,4 +135,4 @@
 #define STATUS_SUCCESS				0x00
 #define STATUS_UNSUCCESSFUL		0x01
 
-#endif // __RTMP_TYPE_H__ //
+#endif /* __RTMP_TYPE_H__ // */
diff --git a/drivers/staging/rt2860/rtusb_io.h b/drivers/staging/rt2860/rtusb_io.h
index 6217dd2..ec1ffba 100644
--- a/drivers/staging/rt2860/rtusb_io.h
+++ b/drivers/staging/rt2860/rtusb_io.h
@@ -30,54 +30,54 @@
 
 #include "rtmp_type.h"
 
-// New for MeetingHouse Api support
-#define CMDTHREAD_VENDOR_RESET                      0x0D730101	// cmd
-#define CMDTHREAD_VENDOR_UNPLUG                     0x0D730102	// cmd
-#define CMDTHREAD_VENDOR_SWITCH_FUNCTION            0x0D730103	// cmd
-#define CMDTHREAD_MULTI_WRITE_MAC                   0x0D730107	// cmd
-#define CMDTHREAD_MULTI_READ_MAC                    0x0D730108	// cmd
-#define CMDTHREAD_VENDOR_EEPROM_WRITE               0x0D73010A	// cmd
-#define CMDTHREAD_VENDOR_EEPROM_READ                0x0D73010B	// cmd
-#define CMDTHREAD_VENDOR_ENTER_TESTMODE             0x0D73010C	// cmd
-#define CMDTHREAD_VENDOR_EXIT_TESTMODE              0x0D73010D	// cmd
-#define CMDTHREAD_VENDOR_WRITE_BBP                  0x0D730119	// cmd
-#define CMDTHREAD_VENDOR_READ_BBP                   0x0D730118	// cmd
-#define CMDTHREAD_VENDOR_WRITE_RF                   0x0D73011A	// cmd
-#define CMDTHREAD_VENDOR_FLIP_IQ                    0x0D73011D	// cmd
-#define CMDTHREAD_RESET_BULK_OUT                    0x0D730210	// cmd
-#define CMDTHREAD_RESET_BULK_IN                     0x0D730211	// cmd
-#define CMDTHREAD_SET_PSM_BIT				0x0D730212	// cmd
-#define CMDTHREAD_SET_RADIO                         0x0D730214	// cmd
-#define CMDTHREAD_UPDATE_TX_RATE                    0x0D730216	// cmd
-#define CMDTHREAD_802_11_ADD_KEY_WEP                0x0D730218	// cmd
-#define CMDTHREAD_RESET_FROM_ERROR                  0x0D73021A	// cmd
-#define CMDTHREAD_LINK_DOWN                         0x0D73021B	// cmd
-#define CMDTHREAD_RESET_FROM_NDIS                   0x0D73021C	// cmd
-#define CMDTHREAD_CHECK_GPIO                        0x0D730215	// cmd
-#define CMDTHREAD_FORCE_WAKE_UP                     0x0D730222	// cmd
-#define CMDTHREAD_SET_BW                            0x0D730225	// cmd
-#define CMDTHREAD_SET_ASIC_WCID                     0x0D730226	// cmd
-#define CMDTHREAD_SET_ASIC_WCID_CIPHER              0x0D730227	// cmd
-#define CMDTHREAD_QKERIODIC_EXECUT                  0x0D73023D	// cmd
-#define RT_CMD_SET_KEY_TABLE                        0x0D730228	// cmd
-#define RT_CMD_SET_RX_WCID_TABLE                    0x0D730229	// cmd
-#define CMDTHREAD_SET_CLIENT_MAC_ENTRY              0x0D73023E	// cmd
-#define CMDTHREAD_SET_GROUP_KEY						0x0D73023F	// cmd
-#define CMDTHREAD_SET_PAIRWISE_KEY					0x0D730240	// cmd
+/* New for MeetingHouse Api support */
+#define CMDTHREAD_VENDOR_RESET                      0x0D730101	/* cmd */
+#define CMDTHREAD_VENDOR_UNPLUG                     0x0D730102	/* cmd */
+#define CMDTHREAD_VENDOR_SWITCH_FUNCTION            0x0D730103	/* cmd */
+#define CMDTHREAD_MULTI_WRITE_MAC                   0x0D730107	/* cmd */
+#define CMDTHREAD_MULTI_READ_MAC                    0x0D730108	/* cmd */
+#define CMDTHREAD_VENDOR_EEPROM_WRITE               0x0D73010A	/* cmd */
+#define CMDTHREAD_VENDOR_EEPROM_READ                0x0D73010B	/* cmd */
+#define CMDTHREAD_VENDOR_ENTER_TESTMODE             0x0D73010C	/* cmd */
+#define CMDTHREAD_VENDOR_EXIT_TESTMODE              0x0D73010D	/* cmd */
+#define CMDTHREAD_VENDOR_WRITE_BBP                  0x0D730119	/* cmd */
+#define CMDTHREAD_VENDOR_READ_BBP                   0x0D730118	/* cmd */
+#define CMDTHREAD_VENDOR_WRITE_RF                   0x0D73011A	/* cmd */
+#define CMDTHREAD_VENDOR_FLIP_IQ                    0x0D73011D	/* cmd */
+#define CMDTHREAD_RESET_BULK_OUT                    0x0D730210	/* cmd */
+#define CMDTHREAD_RESET_BULK_IN                     0x0D730211	/* cmd */
+#define CMDTHREAD_SET_PSM_BIT				0x0D730212	/* cmd */
+#define CMDTHREAD_SET_RADIO                         0x0D730214	/* cmd */
+#define CMDTHREAD_UPDATE_TX_RATE                    0x0D730216	/* cmd */
+#define CMDTHREAD_802_11_ADD_KEY_WEP                0x0D730218	/* cmd */
+#define CMDTHREAD_RESET_FROM_ERROR                  0x0D73021A	/* cmd */
+#define CMDTHREAD_LINK_DOWN                         0x0D73021B	/* cmd */
+#define CMDTHREAD_RESET_FROM_NDIS                   0x0D73021C	/* cmd */
+#define CMDTHREAD_CHECK_GPIO                        0x0D730215	/* cmd */
+#define CMDTHREAD_FORCE_WAKE_UP                     0x0D730222	/* cmd */
+#define CMDTHREAD_SET_BW                            0x0D730225	/* cmd */
+#define CMDTHREAD_SET_ASIC_WCID                     0x0D730226	/* cmd */
+#define CMDTHREAD_SET_ASIC_WCID_CIPHER              0x0D730227	/* cmd */
+#define CMDTHREAD_QKERIODIC_EXECUT                  0x0D73023D	/* cmd */
+#define RT_CMD_SET_KEY_TABLE                        0x0D730228	/* cmd */
+#define RT_CMD_SET_RX_WCID_TABLE                    0x0D730229	/* cmd */
+#define CMDTHREAD_SET_CLIENT_MAC_ENTRY              0x0D73023E	/* cmd */
+#define CMDTHREAD_SET_GROUP_KEY						0x0D73023F	/* cmd */
+#define CMDTHREAD_SET_PAIRWISE_KEY					0x0D730240	/* cmd */
 
-#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER    0x0D710105	// cmd
-#define CMDTHREAD_802_11_SET_PHY_MODE               0x0D79010C	// cmd
-#define CMDTHREAD_802_11_SET_STA_CONFIG             0x0D790111	// cmd
-#define CMDTHREAD_802_11_SET_PREAMBLE               0x0D790101	// cmd
-#define CMDTHREAD_802_11_COUNTER_MEASURE			0x0D790102	// cmd
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-#define CMDTHREAD_UPDATE_PROTECT					0x0D790103	// cmd
-// end johnli
+#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER    0x0D710105	/* cmd */
+#define CMDTHREAD_802_11_SET_PHY_MODE               0x0D79010C	/* cmd */
+#define CMDTHREAD_802_11_SET_STA_CONFIG             0x0D790111	/* cmd */
+#define CMDTHREAD_802_11_SET_PREAMBLE               0x0D790101	/* cmd */
+#define CMDTHREAD_802_11_COUNTER_MEASURE			0x0D790102	/* cmd */
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
+#define CMDTHREAD_UPDATE_PROTECT					0x0D790103	/* cmd */
+/* end johnli */
 
-//CMDTHREAD_MULTI_READ_MAC
-//CMDTHREAD_MULTI_WRITE_MAC
-//CMDTHREAD_VENDOR_EEPROM_READ
-//CMDTHREAD_VENDOR_EEPROM_WRITE
+/*CMDTHREAD_MULTI_READ_MAC */
+/*CMDTHREAD_MULTI_WRITE_MAC */
+/*CMDTHREAD_VENDOR_EEPROM_READ */
+/*CMDTHREAD_VENDOR_EEPROM_WRITE */
 typedef struct _CMDHandler_TLV {
 	USHORT Offset;
 	USHORT Length;
@@ -116,7 +116,7 @@
 	USB Cmd to ASIC Related MACRO
 
 ******************************************************************************/
-// reset MAC of a station entry to 0xFFFFFFFFFFFF
+/* reset MAC of a station entry to 0xFFFFFFFFFFFF */
 #define RTMP_STA_ENTRY_MAC_RESET(pAd, Wcid)					\
 	{	RT_SET_ASIC_WCID	SetAsicWcid;						\
 		SetAsicWcid.WCID = Wcid;								\
@@ -125,22 +125,22 @@
 		RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID,	\
 				&SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	}
 
-// add this entry into ASIC RX WCID search table
+/* add this entry into ASIC RX WCID search table */
 #define RTMP_STA_ENTRY_ADD(pAd, pEntry)							\
 	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY,	\
 							pEntry, sizeof(MAC_TABLE_ENTRY));
 
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-// Set MAC register value according operation mode
+/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
+/* Set MAC register value according operation mode */
 #define RTMP_UPDATE_PROTECT(pAd)	\
 	RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
-// end johnli
+/* end johnli */
 
-// remove Pair-wise key material from ASIC
-// yet implement
+/* remove Pair-wise key material from ASIC */
+/* yet implement */
 #define RTMP_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid)
 
-// add Client security information into ASIC WCID table and IVEIV table
+/* add Client security information into ASIC WCID table and IVEIV table */
 #define RTMP_STA_SECURITY_INFO_ADD(pAd, apidx, KeyID, pEntry)						\
 	{	RTMP_STA_ENTRY_MAC_RESET(pAd, pEntry->Aid);								\
 		if (pEntry->Aid >= 1) {														\
@@ -160,7 +160,7 @@
 			RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID_CIPHER,			\
 							&SetAsicWcidAttri, sizeof(RT_SET_ASIC_WCID_ATTRI)); } }
 
-// Insert the BA bitmap to ASIC for the Wcid entry
+/* Insert the BA bitmap to ASIC for the Wcid entry */
 #define RTMP_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID)					\
 		do{																\
 			RT_SET_ASIC_WCID	SetAsicWcid;							\
@@ -170,7 +170,7 @@
 			RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	\
 		}while(0)
 
-// Remove the BA bitmap from ASIC for the Wcid entry
+/* Remove the BA bitmap from ASIC for the Wcid entry */
 #define RTMP_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID)				\
 		do{																\
 			RT_SET_ASIC_WCID	SetAsicWcid;							\
@@ -180,4 +180,4 @@
 			RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	\
 		}while(0)
 
-#endif // __RTUSB_IO_H__ //
+#endif /* __RTUSB_IO_H__ // */
diff --git a/drivers/staging/rt2860/spectrum.h b/drivers/staging/rt2860/spectrum.h
index 64154e9..b1e3ba0 100644
--- a/drivers/staging/rt2860/spectrum.h
+++ b/drivers/staging/rt2860/spectrum.h
@@ -186,4 +186,4 @@
 
 VOID RguClass_BuildBcnChList(IN PRTMP_ADAPTER pAd,
 			     OUT PUCHAR pBuf, OUT PULONG pBufLen);
-#endif // __SPECTRUM_H__ //
+#endif /* __SPECTRUM_H__ // */
diff --git a/drivers/staging/rt2860/spectrum_def.h b/drivers/staging/rt2860/spectrum_def.h
index 4ebe5f5..d100c31 100644
--- a/drivers/staging/rt2860/spectrum_def.h
+++ b/drivers/staging/rt2860/spectrum_def.h
@@ -58,7 +58,7 @@
 	ULONG lastTime;
 	BOOLEAN Valid;
 	UINT8 DialogToken;
-	UINT8 MeasureDialogToken[3];	// 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
+	UINT8 MeasureDialogToken[3];	/* 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure. */
 } MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
 
 typedef struct _MEASURE_REQ_TAB {
@@ -195,4 +195,4 @@
 	UINT16 QuietOffset;
 } QUIET_INFO, *PQUIET_INFO;
 
-#endif // __SPECTRUM_DEF_H__ //
+#endif /* __SPECTRUM_DEF_H__ // */
diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h
index fb5843c..5f998c7 100644
--- a/drivers/staging/rt2860/wpa.h
+++ b/drivers/staging/rt2860/wpa.h
@@ -38,7 +38,7 @@
 #ifndef	__WPA_H__
 #define	__WPA_H__
 
-// EAPOL Key descripter frame format related length
+/* EAPOL Key descripter frame format related length */
 #define LEN_KEY_DESC_NONCE			32
 #define LEN_KEY_DESC_IV				16
 #define LEN_KEY_DESC_RSC			8
@@ -46,25 +46,25 @@
 #define LEN_KEY_DESC_REPLAY			8
 #define LEN_KEY_DESC_MIC			16
 
-// The length is the EAPoL-Key frame except key data field.
-// Please refer to 802.11i-2004 ,Figure 43u in p.78
+/* The length is the EAPoL-Key frame except key data field. */
+/* Please refer to 802.11i-2004 ,Figure 43u in p.78 */
 #define LEN_EAPOL_KEY_MSG			(sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE)
 
-// EAP Code Type.
+/* EAP Code Type. */
 #define EAP_CODE_REQUEST	1
 #define EAP_CODE_RESPONSE	2
 #define EAP_CODE_SUCCESS    3
 #define EAP_CODE_FAILURE    4
 
-// EAPOL frame Protocol Version
+/* EAPOL frame Protocol Version */
 #define	EAPOL_VER					1
 #define	EAPOL_VER2					2
 
-// EAPOL-KEY Descriptor Type
+/* EAPOL-KEY Descriptor Type */
 #define	WPA1_KEY_DESC				0xfe
 #define WPA2_KEY_DESC               0x02
 
-// Key Descriptor Version of Key Information
+/* Key Descriptor Version of Key Information */
 #define	DESC_TYPE_TKIP				1
 #define	DESC_TYPE_AES				2
 
@@ -73,11 +73,11 @@
 
 #define LEN_MASTER_KEY				32
 
-// EAPOL EK, MK
+/* EAPOL EK, MK */
 #define LEN_EAP_EK					16
 #define LEN_EAP_MICK				16
 #define LEN_EAP_KEY					((LEN_EAP_EK)+(LEN_EAP_MICK))
-// TKIP key related
+/* TKIP key related */
 #define LEN_PMKID					16
 #define LEN_TKIP_EK					16
 #define LEN_TKIP_RXMICK				8
@@ -94,13 +94,13 @@
 #define LEN_PMK_NAME				16
 #define LEN_NONCE					32
 
-// RSN IE Length definition
+/* RSN IE Length definition */
 #define MAX_LEN_OF_RSNIE		255
 #define MIN_LEN_OF_RSNIE         	8
 
 #define KEY_LIFETIME				3600
 
-//EAP Packet Type
+/*EAP Packet Type */
 #define	EAPPacket		0
 #define	EAPOLStart		1
 #define	EAPOLLogoff		2
@@ -119,28 +119,28 @@
 #define PAIRWISEKEY					1
 #define GROUPKEY					0
 
-// Retry timer counter initial value
+/* Retry timer counter initial value */
 #define PEER_MSG1_RETRY_TIMER_CTR           0
 #define PEER_MSG3_RETRY_TIMER_CTR           10
 #define GROUP_MSG1_RETRY_TIMER_CTR          20
 
-//#ifdef CONFIG_AP_SUPPORT
-// WPA mechanism retry timer interval
-#define PEER_MSG1_RETRY_EXEC_INTV           1000	// 1 sec
-#define PEER_MSG3_RETRY_EXEC_INTV           3000	// 3 sec
-#define GROUP_KEY_UPDATE_EXEC_INTV          1000	// 1 sec
-#define PEER_GROUP_KEY_UPDATE_INIV			2000	// 2 sec
+/*#ifdef CONFIG_AP_SUPPORT */
+/* WPA mechanism retry timer interval */
+#define PEER_MSG1_RETRY_EXEC_INTV           1000	/* 1 sec */
+#define PEER_MSG3_RETRY_EXEC_INTV           3000	/* 3 sec */
+#define GROUP_KEY_UPDATE_EXEC_INTV          1000	/* 1 sec */
+#define PEER_GROUP_KEY_UPDATE_INIV			2000	/* 2 sec */
 
-#define ENQUEUE_EAPOL_START_TIMER			200	// 200 ms
+#define ENQUEUE_EAPOL_START_TIMER			200	/* 200 ms */
 
-// group rekey interval
+/* group rekey interval */
 #define TIME_REKEY                          0
 #define PKT_REKEY                           1
 #define DISABLE_REKEY                       2
 #define MAX_REKEY                           2
 
 #define MAX_REKEY_INTER                     0x3ffffff
-//#endif // CONFIG_AP_SUPPORT //
+/*#endif // CONFIG_AP_SUPPORT // */
 
 #define GROUP_SUITE					0
 #define PAIRWISE_SUITE				1
@@ -194,13 +194,13 @@
 
 #define IS_WPA_CAPABILITY(a)       (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
 
-// EAPOL Key Information definition within Key descriptor format
+/* EAPOL Key Information definition within Key descriptor format */
 typedef struct PACKED _KEY_INFO {
 	UCHAR KeyMic:1;
 	UCHAR Secure:1;
 	UCHAR Error:1;
 	UCHAR Request:1;
-	UCHAR EKD_DL:1;		// EKD for AP; DL for STA
+	UCHAR EKD_DL:1;		/* EKD for AP; DL for STA */
 	UCHAR Rsvd:3;
 	UCHAR KeyDescVer:3;
 	UCHAR KeyType:1;
@@ -209,7 +209,7 @@
 	UCHAR KeyAck:1;
 } KEY_INFO, *PKEY_INFO;
 
-// EAPOL Key descriptor format
+/* EAPOL Key descriptor format */
 typedef struct PACKED _KEY_DESCRIPTER {
 	UCHAR Type;
 	KEY_INFO KeyInfo;
@@ -231,7 +231,7 @@
 	KEY_DESCRIPTER KeyDesc;
 } EAPOL_PACKET, *PEAPOL_PACKET;
 
-//802.11i D10 page 83
+/*802.11i D10 page 83 */
 typedef struct PACKED _GTK_ENCAP {
 	UCHAR Kid:2;
 	UCHAR tx:1;
@@ -248,7 +248,7 @@
 	GTK_ENCAP GTKEncap;
 } KDE_ENCAP, *PKDE_ENCAP;
 
-// For WPA1
+/* For WPA1 */
 typedef struct PACKED _RSNIE {
 	UCHAR oui[4];
 	USHORT version;
@@ -259,7 +259,7 @@
 	} ucast[1];
 } RSNIE, *PRSNIE;
 
-// For WPA2
+/* For WPA2 */
 typedef struct PACKED _RSNIE2 {
 	USHORT version;
 	UCHAR mcast[4];
@@ -269,7 +269,7 @@
 	} ucast[1];
 } RSNIE2, *PRSNIE2;
 
-// AKM Suite
+/* AKM Suite */
 typedef struct PACKED _RSNIE_AUTH {
 	USHORT acount;
 	struct PACKED {
@@ -294,45 +294,45 @@
 	UCHAR Body_Len[2];
 	UCHAR code;
 	UCHAR identifier;
-	UCHAR length[2];	// including code and identifier, followed by length-2 octets of data
+	UCHAR length[2];	/* including code and identifier, followed by length-2 octets of data */
 } EAP_HDR, *PEAP_HDR;
 
-// For supplicant state machine states. 802.11i Draft 4.1, p. 97
-// We simplified it
+/* For supplicant state machine states. 802.11i Draft 4.1, p. 97 */
+/* We simplified it */
 typedef enum _WpaState {
-	SS_NOTUSE,		// 0
-	SS_START,		// 1
-	SS_WAIT_MSG_3,		// 2
-	SS_WAIT_GROUP,		// 3
-	SS_FINISH,		// 4
-	SS_KEYUPDATE,		// 5
+	SS_NOTUSE,		/* 0 */
+	SS_START,		/* 1 */
+	SS_WAIT_MSG_3,		/* 2 */
+	SS_WAIT_GROUP,		/* 3 */
+	SS_FINISH,		/* 4 */
+	SS_KEYUPDATE,		/* 5 */
 } WPA_STATE;
 
-//
-//      The definition of the cipher combination
-//
-//       bit3   bit2  bit1   bit0
-//      +------------+------------+
-//      |         WPA    |         WPA2   |
-//      +------+-----+------+-----+
-//      | TKIP | AES | TKIP | AES |
-//      |       0  |  1  |   1  |  0  | -> 0x06
-//      |       0  |  1  |   1  |  1  | -> 0x07
-//      |       1  |  0  |   0  |  1  | -> 0x09
-//      |       1  |  0  |   1  |  1  | -> 0x0B
-//      |       1  |  1  |   0  |  1  | -> 0x0D
-//      |       1  |  1  |   1  |  0  | -> 0x0E
-//      |       1  |  1  |   1  |  1  | -> 0x0F
-//      +------+-----+------+-----+
-//
+/* */
+/*      The definition of the cipher combination */
+/* */
+/*       bit3   bit2  bit1   bit0 */
+/*      +------------+------------+ */
+/*      |         WPA    |         WPA2   | */
+/*      +------+-----+------+-----+ */
+/*      | TKIP | AES | TKIP | AES | */
+/*      |       0  |  1  |   1  |  0  | -> 0x06 */
+/*      |       0  |  1  |   1  |  1  | -> 0x07 */
+/*      |       1  |  0  |   0  |  1  | -> 0x09 */
+/*      |       1  |  0  |   1  |  1  | -> 0x0B */
+/*      |       1  |  1  |   0  |  1  | -> 0x0D */
+/*      |       1  |  1  |   1  |  0  | -> 0x0E */
+/*      |       1  |  1  |   1  |  1  | -> 0x0F */
+/*      +------+-----+------+-----+ */
+/* */
 typedef enum _WpaMixPairCipher {
 	MIX_CIPHER_NOTUSE = 0x00,
-	WPA_NONE_WPA2_TKIPAES = 0x03,	// WPA2-TKIPAES
+	WPA_NONE_WPA2_TKIPAES = 0x03,	/* WPA2-TKIPAES */
 	WPA_AES_WPA2_TKIP = 0x06,
 	WPA_AES_WPA2_TKIPAES = 0x07,
 	WPA_TKIP_WPA2_AES = 0x09,
 	WPA_TKIP_WPA2_TKIPAES = 0x0B,
-	WPA_TKIPAES_WPA2_NONE = 0x0C,	// WPA-TKIPAES
+	WPA_TKIPAES_WPA2_NONE = 0x0C,	/* WPA-TKIPAES */
 	WPA_TKIPAES_WPA2_AES = 0x0D,
 	WPA_TKIPAES_WPA2_TKIP = 0x0E,
 	WPA_TKIPAES_WPA2_TKIPAES = 0x0F,
@@ -341,22 +341,22 @@
 typedef struct PACKED _RSN_IE_HEADER_STRUCT {
 	UCHAR Eid;
 	UCHAR Length;
-	USHORT Version;		// Little endian format
+	USHORT Version;		/* Little endian format */
 } RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
 
-// Cipher suite selector types
+/* Cipher suite selector types */
 typedef struct PACKED _CIPHER_SUITE_STRUCT {
 	UCHAR Oui[3];
 	UCHAR Type;
 } CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
 
-// Authentication and Key Management suite selector
+/* Authentication and Key Management suite selector */
 typedef struct PACKED _AKM_SUITE_STRUCT {
 	UCHAR Oui[3];
 	UCHAR Type;
 } AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
 
-// RSN capability
+/* RSN capability */
 typedef struct PACKED _RSN_CAPABILITY {
 	USHORT Rsv:10;
 	USHORT GTKSAReplayCnt:2;