sound/arm/pxa2xx-ac97-lib.c - kernel/msm-4.9 - Gitiles

 /*
  * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
  * which contain:
  *
  * Author:	Nicolas Pitre
  * Created:	Dec 02, 2004
  * Copyright:	MontaVista Software Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/delay.h>

 #include <sound/ac97_codec.h>
 #include <sound/pxa2xx-lib.h>

 #include <asm/irq.h>
 #include <mach/regs-ac97.h>
 #include <mach/audio.h>

 static DEFINE_MUTEX(car_mutex);
 static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
 static volatile long gsr_bits;
 static struct clk *ac97_clk;
 static struct clk *ac97conf_clk;
 static int reset_gpio;

 extern void pxa27x_assert_ac97reset(int reset_gpio, int on);

 /*
  * Beware PXA27x bugs:
  *
  *   o Slot 12 read from modem space will hang controller.
  *   o CDONE, SDONE interrupt fails after any slot 12 IO.
  *
  * We therefore have an hybrid approach for waiting on SDONE (interrupt or
  * 1 jiffy timeout if interrupt never comes).
  */

 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
 	unsigned short val = -1;
 	volatile u32 *reg_addr;

 	mutex_lock(&car_mutex);

 	/* set up primary or secondary codec space */
 	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
 		reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
 	else
 		reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
 	reg_addr += (reg >> 1);

 	/* start read access across the ac97 link */
 	GSR = GSR_CDONE | GSR_SDONE;
 	gsr_bits = 0;
 	val = *reg_addr;
 	if (reg == AC97_GPIO_STATUS)
 		goto out;
 	if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
 	    !((GSR | gsr_bits) & GSR_SDONE)) {
 		printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
 				__func__, reg, GSR | gsr_bits);
 		val = -1;
 		goto out;
 	}

 	/* valid data now */
 	GSR = GSR_CDONE | GSR_SDONE;
 	gsr_bits = 0;
 	val = *reg_addr;
 	/* but we've just started another cycle... */
 	wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);

 out:	mutex_unlock(&car_mutex);
 	return val;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);

 void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 			unsigned short val)
 {
 	volatile u32 *reg_addr;

 	mutex_lock(&car_mutex);

 	/* set up primary or secondary codec space */
 	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
 		reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
 	else
 		reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
 	reg_addr += (reg >> 1);

 	GSR = GSR_CDONE | GSR_SDONE;
 	gsr_bits = 0;
 	*reg_addr = val;
 	if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
 	    !((GSR | gsr_bits) & GSR_CDONE))
 		printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
 				__func__, reg, GSR | gsr_bits);

 	mutex_unlock(&car_mutex);
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);

 #ifdef CONFIG_PXA25x
 static inline void pxa_ac97_warm_pxa25x(void)
 {
 	gsr_bits = 0;

 	GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
 	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
 }

 static inline void pxa_ac97_cold_pxa25x(void)
 {
 	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */

 	gsr_bits = 0;

 	GCR = GCR_COLD_RST;
 	GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
 	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
 }
 #endif

 #ifdef CONFIG_PXA27x
 static inline void pxa_ac97_warm_pxa27x(void)
 {
 	gsr_bits = 0;

 	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
 	pxa27x_assert_ac97reset(reset_gpio, 1);
 	udelay(10);
 	GCR |= GCR_WARM_RST;
 	pxa27x_assert_ac97reset(reset_gpio, 0);
 	udelay(500);
 }

 static inline void pxa_ac97_cold_pxa27x(void)
 {
 	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */

 	gsr_bits = 0;

 	/* PXA27x Developers Manual section 13.5.2.2.1 */
 	clk_enable(ac97conf_clk);
 	udelay(5);
 	clk_disable(ac97conf_clk);
 	GCR = GCR_COLD_RST;
 	udelay(50);
 }
 #endif

 #ifdef CONFIG_PXA3xx
 static inline void pxa_ac97_warm_pxa3xx(void)
 {
 	int timeout = 100;

 	gsr_bits = 0;

 	/* Can't use interrupts */
 	GCR |= GCR_WARM_RST;
 	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
 		mdelay(1);
 }

 static inline void pxa_ac97_cold_pxa3xx(void)
 {
 	int timeout = 1000;

 	/* Hold CLKBPB for 100us */
 	GCR = 0;
 	GCR = GCR_CLKBPB;
 	udelay(100);
 	GCR = 0;

 	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */

 	gsr_bits = 0;

 	/* Can't use interrupts on PXA3xx */
 	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);

 	GCR = GCR_WARM_RST | GCR_COLD_RST;
 	while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
 		mdelay(10);
 }
 #endif

 bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
 {
 	unsigned long gsr;

 #ifdef CONFIG_PXA25x
 	if (cpu_is_pxa25x())
 		pxa_ac97_warm_pxa25x();
 	else
 #endif
 #ifdef CONFIG_PXA27x
 	if (cpu_is_pxa27x())
 		pxa_ac97_warm_pxa27x();
 	else
 #endif
 #ifdef CONFIG_PXA3xx
 	if (cpu_is_pxa3xx())
 		pxa_ac97_warm_pxa3xx();
 	else
 #endif
 		BUG();
 	gsr = GSR | gsr_bits;
 	if (!(gsr & (GSR_PCR | GSR_SCR))) {
 		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
 				 __func__, gsr);

 		return false;
 	}

 	return true;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);

 bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
 {
 	unsigned long gsr;

 #ifdef CONFIG_PXA25x
 	if (cpu_is_pxa25x())
 		pxa_ac97_cold_pxa25x();
 	else
 #endif
 #ifdef CONFIG_PXA27x
 	if (cpu_is_pxa27x())
 		pxa_ac97_cold_pxa27x();
 	else
 #endif
 #ifdef CONFIG_PXA3xx
 	if (cpu_is_pxa3xx())
 		pxa_ac97_cold_pxa3xx();
 	else
 #endif
 		BUG();

 	gsr = GSR | gsr_bits;
 	if (!(gsr & (GSR_PCR | GSR_SCR))) {
 		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
 				 __func__, gsr);

 		return false;
 	}

 	return true;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);


 void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
 {
 	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 	GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);

 static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
 {
 	long status;

 	status = GSR;
 	if (status) {
 		GSR = status;
 		gsr_bits |= status;
 		wake_up(&gsr_wq);

 		/* Although we don't use those we still need to clear them
 		   since they tend to spuriously trigger when MMC is used
 		   (hardware bug? go figure)... */
 		if (cpu_is_pxa27x()) {
 			MISR = MISR_EOC;
 			PISR = PISR_EOC;
 			MCSR = MCSR_EOC;
 		}

 		return IRQ_HANDLED;
 	}

 	return IRQ_NONE;
 }

 #ifdef CONFIG_PM
 int pxa2xx_ac97_hw_suspend(void)
 {
 	GCR |= GCR_ACLINK_OFF;
 	clk_disable(ac97_clk);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);

 int pxa2xx_ac97_hw_resume(void)
 {
 	clk_enable(ac97_clk);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
 #endif

 int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 {
 	int ret;
 	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;

 	if (pdata) {
 		switch (pdata->reset_gpio) {
 		case 95:
 		case 113:
 			reset_gpio = pdata->reset_gpio;
 			break;
 		case 0:
 			reset_gpio = 113;
 			break;
 		case -1:
 			break;
 		default:
 			dev_err(&dev->dev, "Invalid reset GPIO %d\n",
 				pdata->reset_gpio);
 		}
 	} else {
 		if (cpu_is_pxa27x())
 			reset_gpio = 113;
 	}

 	if (cpu_is_pxa27x()) {
 		/* Use GPIO 113 as AC97 Reset on Bulverde */
 		pxa27x_assert_ac97reset(reset_gpio, 0);
 		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 		if (IS_ERR(ac97conf_clk)) {
 			ret = PTR_ERR(ac97conf_clk);
 			ac97conf_clk = NULL;
 			goto err_conf;
 		}
 	}

 	ac97_clk = clk_get(&dev->dev, "AC97CLK");
 	if (IS_ERR(ac97_clk)) {
 		ret = PTR_ERR(ac97_clk);
 		ac97_clk = NULL;
 		goto err_clk;
 	}

 	ret = clk_enable(ac97_clk);
 	if (ret)
 		goto err_clk2;

 	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
 	if (ret < 0)
 		goto err_irq;

 	return 0;

 err_irq:
 	GCR |= GCR_ACLINK_OFF;
 err_clk2:
 	clk_put(ac97_clk);
 	ac97_clk = NULL;
 err_clk:
 	if (ac97conf_clk) {
 		clk_put(ac97conf_clk);
 		ac97conf_clk = NULL;
 	}
 err_conf:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);

 void pxa2xx_ac97_hw_remove(struct platform_device *dev)
 {
 	GCR |= GCR_ACLINK_OFF;
 	free_irq(IRQ_AC97, NULL);
 	if (ac97conf_clk) {
 		clk_put(ac97conf_clk);
 		ac97conf_clk = NULL;
 	}
 	clk_disable(ac97_clk);
 	clk_put(ac97_clk);
 	ac97_clk = NULL;
 }
 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);

 MODULE_AUTHOR("Nicolas Pitre");
 MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
 MODULE_LICENSE("GPL");
	/*
	* Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
	* which contain:
	*
	* Author: Nicolas Pitre
	* Created: Dec 02, 2004
	* Copyright: MontaVista Software Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/kernel.h>
	#include <linux/platform_device.h>
	#include <linux/interrupt.h>
	#include <linux/clk.h>
	#include <linux/delay.h>

	#include <sound/ac97_codec.h>
	#include <sound/pxa2xx-lib.h>

	#include <asm/irq.h>
	#include <mach/regs-ac97.h>
	#include <mach/audio.h>

	static DEFINE_MUTEX(car_mutex);
	static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
	static volatile long gsr_bits;
	static struct clk *ac97_clk;
	static struct clk *ac97conf_clk;
	static int reset_gpio;

	extern void pxa27x_assert_ac97reset(int reset_gpio, int on);

	/*
	* Beware PXA27x bugs:
	*
	* o Slot 12 read from modem space will hang controller.
	* o CDONE, SDONE interrupt fails after any slot 12 IO.
	*
	* We therefore have an hybrid approach for waiting on SDONE (interrupt or
	* 1 jiffy timeout if interrupt never comes).
	*/

	unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
	{
	unsigned short val = -1;
	volatile u32 *reg_addr;

	mutex_lock(&car_mutex);

	/* set up primary or secondary codec space */
	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
	reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
	else
	reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
	reg_addr += (reg >> 1);

	/* start read access across the ac97 link */
	GSR = GSR_CDONE \| GSR_SDONE;
	gsr_bits = 0;
	val = *reg_addr;
	if (reg == AC97_GPIO_STATUS)
	goto out;
	if (wait_event_timeout(gsr_wq, (GSR \| gsr_bits) & GSR_SDONE, 1) <= 0 &&
	!((GSR \| gsr_bits) & GSR_SDONE)) {
	printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
	__func__, reg, GSR \| gsr_bits);
	val = -1;
	goto out;
	}

	/* valid data now */
	GSR = GSR_CDONE \| GSR_SDONE;
	gsr_bits = 0;
	val = *reg_addr;
	/* but we've just started another cycle... */
	wait_event_timeout(gsr_wq, (GSR \| gsr_bits) & GSR_SDONE, 1);

	out: mutex_unlock(&car_mutex);
	return val;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);

	void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
	unsigned short val)
	{
	volatile u32 *reg_addr;

	mutex_lock(&car_mutex);

	/* set up primary or secondary codec space */
	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
	reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
	else
	reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
	reg_addr += (reg >> 1);

	GSR = GSR_CDONE \| GSR_SDONE;
	gsr_bits = 0;
	*reg_addr = val;
	if (wait_event_timeout(gsr_wq, (GSR \| gsr_bits) & GSR_CDONE, 1) <= 0 &&
	!((GSR \| gsr_bits) & GSR_CDONE))
	printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
	__func__, reg, GSR \| gsr_bits);

	mutex_unlock(&car_mutex);
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);

	#ifdef CONFIG_PXA25x
	static inline void pxa_ac97_warm_pxa25x(void)
	{
	gsr_bits = 0;

	GCR \|= GCR_WARM_RST \| GCR_PRIRDY_IEN \| GCR_SECRDY_IEN;
	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR \| GSR_SCR), 1);
	}

	static inline void pxa_ac97_cold_pxa25x(void)
	{
	GCR &= GCR_COLD_RST; /* clear everything but nCRST */
	GCR &= ~GCR_COLD_RST; /* then assert nCRST */

	gsr_bits = 0;

	GCR = GCR_COLD_RST;
	GCR \|= GCR_CDONE_IE\|GCR_SDONE_IE;
	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR \| GSR_SCR), 1);
	}
	#endif

	#ifdef CONFIG_PXA27x
	static inline void pxa_ac97_warm_pxa27x(void)
	{
	gsr_bits = 0;

	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
	pxa27x_assert_ac97reset(reset_gpio, 1);
	udelay(10);
	GCR \|= GCR_WARM_RST;
	pxa27x_assert_ac97reset(reset_gpio, 0);
	udelay(500);
	}

	static inline void pxa_ac97_cold_pxa27x(void)
	{
	GCR &= GCR_COLD_RST; /* clear everything but nCRST */
	GCR &= ~GCR_COLD_RST; /* then assert nCRST */

	gsr_bits = 0;

	/* PXA27x Developers Manual section 13.5.2.2.1 */
	clk_enable(ac97conf_clk);
	udelay(5);
	clk_disable(ac97conf_clk);
	GCR = GCR_COLD_RST;
	udelay(50);
	}
	#endif

	#ifdef CONFIG_PXA3xx
	static inline void pxa_ac97_warm_pxa3xx(void)
	{
	int timeout = 100;

	gsr_bits = 0;

	/* Can't use interrupts */
	GCR \|= GCR_WARM_RST;
	while (!((GSR \| gsr_bits) & (GSR_PCR \| GSR_SCR)) && timeout--)
	mdelay(1);
	}

	static inline void pxa_ac97_cold_pxa3xx(void)
	{
	int timeout = 1000;

	/* Hold CLKBPB for 100us */
	GCR = 0;
	GCR = GCR_CLKBPB;
	udelay(100);
	GCR = 0;

	GCR &= GCR_COLD_RST; /* clear everything but nCRST */
	GCR &= ~GCR_COLD_RST; /* then assert nCRST */

	gsr_bits = 0;

	/* Can't use interrupts on PXA3xx */
	GCR &= ~(GCR_PRIRDY_IEN\|GCR_SECRDY_IEN);

	GCR = GCR_WARM_RST \| GCR_COLD_RST;
	while (!(GSR & (GSR_PCR \| GSR_SCR)) && timeout--)
	mdelay(10);
	}
	#endif

	bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
	{
	unsigned long gsr;

	#ifdef CONFIG_PXA25x
	if (cpu_is_pxa25x())
	pxa_ac97_warm_pxa25x();
	else
	#endif
	#ifdef CONFIG_PXA27x
	if (cpu_is_pxa27x())
	pxa_ac97_warm_pxa27x();
	else
	#endif
	#ifdef CONFIG_PXA3xx
	if (cpu_is_pxa3xx())
	pxa_ac97_warm_pxa3xx();
	else
	#endif
	BUG();
	gsr = GSR \| gsr_bits;
	if (!(gsr & (GSR_PCR \| GSR_SCR))) {
	printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
	__func__, gsr);

	return false;
	}

	return true;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);

	bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
	{
	unsigned long gsr;

	#ifdef CONFIG_PXA25x
	if (cpu_is_pxa25x())
	pxa_ac97_cold_pxa25x();
	else
	#endif
	#ifdef CONFIG_PXA27x
	if (cpu_is_pxa27x())
	pxa_ac97_cold_pxa27x();
	else
	#endif
	#ifdef CONFIG_PXA3xx
	if (cpu_is_pxa3xx())
	pxa_ac97_cold_pxa3xx();
	else
	#endif
	BUG();

	gsr = GSR \| gsr_bits;
	if (!(gsr & (GSR_PCR \| GSR_SCR))) {
	printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
	__func__, gsr);

	return false;
	}

	return true;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);


	void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
	{
	GCR &= ~(GCR_PRIRDY_IEN\|GCR_SECRDY_IEN);
	GCR \|= GCR_SDONE_IE\|GCR_CDONE_IE;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);

	static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
	{
	long status;

	status = GSR;
	if (status) {
	GSR = status;
	gsr_bits \|= status;
	wake_up(&gsr_wq);

	/* Although we don't use those we still need to clear them
	since they tend to spuriously trigger when MMC is used
	(hardware bug? go figure)... */
	if (cpu_is_pxa27x()) {
	MISR = MISR_EOC;
	PISR = PISR_EOC;
	MCSR = MCSR_EOC;
	}

	return IRQ_HANDLED;
	}

	return IRQ_NONE;
	}

	#ifdef CONFIG_PM
	int pxa2xx_ac97_hw_suspend(void)
	{
	GCR \|= GCR_ACLINK_OFF;
	clk_disable(ac97_clk);
	return 0;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);

	int pxa2xx_ac97_hw_resume(void)
	{
	clk_enable(ac97_clk);
	return 0;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
	#endif

	int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
	{
	int ret;
	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;

	if (pdata) {
	switch (pdata->reset_gpio) {
	case 95:
	case 113:
	reset_gpio = pdata->reset_gpio;
	break;
	case 0:
	reset_gpio = 113;
	break;
	case -1:
	break;
	default:
	dev_err(&dev->dev, "Invalid reset GPIO %d\n",
	pdata->reset_gpio);
	}
	} else {
	if (cpu_is_pxa27x())
	reset_gpio = 113;
	}

	if (cpu_is_pxa27x()) {
	/* Use GPIO 113 as AC97 Reset on Bulverde */
	pxa27x_assert_ac97reset(reset_gpio, 0);
	ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
	if (IS_ERR(ac97conf_clk)) {
	ret = PTR_ERR(ac97conf_clk);
	ac97conf_clk = NULL;
	goto err_conf;
	}
	}

	ac97_clk = clk_get(&dev->dev, "AC97CLK");
	if (IS_ERR(ac97_clk)) {
	ret = PTR_ERR(ac97_clk);
	ac97_clk = NULL;
	goto err_clk;
	}

	ret = clk_enable(ac97_clk);
	if (ret)
	goto err_clk2;

	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
	if (ret < 0)
	goto err_irq;

	return 0;

	err_irq:
	GCR \|= GCR_ACLINK_OFF;
	err_clk2:
	clk_put(ac97_clk);
	ac97_clk = NULL;
	err_clk:
	if (ac97conf_clk) {
	clk_put(ac97conf_clk);
	ac97conf_clk = NULL;
	}
	err_conf:
	return ret;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);

	void pxa2xx_ac97_hw_remove(struct platform_device *dev)
	{
	GCR \|= GCR_ACLINK_OFF;
	free_irq(IRQ_AC97, NULL);
	if (ac97conf_clk) {
	clk_put(ac97conf_clk);
	ac97conf_clk = NULL;
	}
	clk_disable(ac97_clk);
	clk_put(ac97_clk);
	ac97_clk = NULL;
	}
	EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);

	MODULE_AUTHOR("Nicolas Pitre");
	MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
	MODULE_LICENSE("GPL");