| /* |
| * Copyright 2012 Steffen Trumtrar, Pengutronix |
| * |
| * based on imx27.dtsi |
| * |
| * This program is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License version 2 as published by the |
| * Free Software Foundation. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "imx35-pinfunc.h" |
| |
| / { |
| aliases { |
| ethernet0 = &fec; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| spi0 = &spi1; |
| spi1 = &spi2; |
| }; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| compatible = "arm,arm1136"; |
| device_type = "cpu"; |
| }; |
| }; |
| |
| avic: avic-interrupt-controller@68000000 { |
| compatible = "fsl,imx35-avic", "fsl,avic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x68000000 0x10000000>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&avic>; |
| ranges; |
| |
| L2: l2-cache@30000000 { |
| compatible = "arm,l210-cache"; |
| reg = <0x30000000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| aips1: aips@43f00000 { |
| compatible = "fsl,aips", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x43f00000 0x100000>; |
| ranges; |
| |
| i2c1: i2c@43f80000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; |
| reg = <0x43f80000 0x4000>; |
| clocks = <&clks 51>; |
| clock-names = "ipg_per"; |
| interrupts = <10>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@43f84000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; |
| reg = <0x43f84000 0x4000>; |
| clocks = <&clks 53>; |
| clock-names = "ipg_per"; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@43f90000 { |
| compatible = "fsl,imx35-uart", "fsl,imx21-uart"; |
| reg = <0x43f90000 0x4000>; |
| clocks = <&clks 9>, <&clks 70>; |
| clock-names = "ipg", "per"; |
| interrupts = <45>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@43f94000 { |
| compatible = "fsl,imx35-uart", "fsl,imx21-uart"; |
| reg = <0x43f94000 0x4000>; |
| clocks = <&clks 9>, <&clks 71>; |
| clock-names = "ipg", "per"; |
| interrupts = <32>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@43f98000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx35-i2c", "fsl,imx1-i2c"; |
| reg = <0x43f98000 0x4000>; |
| clocks = <&clks 52>; |
| clock-names = "ipg_per"; |
| interrupts = <4>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@43fa0000 { |
| compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; |
| reg = <0x43fa0000 0x4000>; |
| interrupts = <11>; |
| clocks = <&clks 68>; |
| dmas = <&sdma 28 0 0>, |
| <&sdma 29 0 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| spi1: cspi@43fa4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx35-cspi"; |
| reg = <0x43fa4000 0x4000>; |
| clocks = <&clks 35 &clks 35>; |
| clock-names = "ipg", "per"; |
| interrupts = <14>; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@43fac000 { |
| compatible = "fsl,imx35-iomuxc"; |
| reg = <0x43fac000 0x4000>; |
| }; |
| }; |
| |
| spba: spba-bus@50000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x100000>; |
| ranges; |
| |
| uart3: serial@5000c000 { |
| compatible = "fsl,imx35-uart", "fsl,imx21-uart"; |
| reg = <0x5000c000 0x4000>; |
| clocks = <&clks 9>, <&clks 72>; |
| clock-names = "ipg", "per"; |
| interrupts = <18>; |
| status = "disabled"; |
| }; |
| |
| spi2: cspi@50010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx35-cspi"; |
| reg = <0x50010000 0x4000>; |
| interrupts = <13>; |
| clocks = <&clks 36 &clks 36>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| fec: fec@50038000 { |
| compatible = "fsl,imx35-fec", "fsl,imx27-fec"; |
| reg = <0x50038000 0x4000>; |
| clocks = <&clks 46>, <&clks 8>; |
| clock-names = "ipg", "ahb"; |
| interrupts = <57>; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips2: aips@53f00000 { |
| compatible = "fsl,aips", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x53f00000 0x100000>; |
| ranges; |
| |
| clks: ccm@53f80000 { |
| compatible = "fsl,imx35-ccm"; |
| reg = <0x53f80000 0x4000>; |
| interrupts = <31>; |
| #clock-cells = <1>; |
| }; |
| |
| gpt: timer@53f90000 { |
| compatible = "fsl,imx35-gpt", "fsl,imx31-gpt"; |
| reg = <0x53f90000 0x4000>; |
| interrupts = <29>; |
| clocks = <&clks 9>, <&clks 50>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| gpio3: gpio@53fa4000 { |
| compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; |
| reg = <0x53fa4000 0x4000>; |
| interrupts = <56>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| esdhc1: esdhc@53fb4000 { |
| compatible = "fsl,imx35-esdhc"; |
| reg = <0x53fb4000 0x4000>; |
| interrupts = <7>; |
| clocks = <&clks 9>, <&clks 8>, <&clks 43>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| esdhc2: esdhc@53fb8000 { |
| compatible = "fsl,imx35-esdhc"; |
| reg = <0x53fb8000 0x4000>; |
| interrupts = <8>; |
| clocks = <&clks 9>, <&clks 8>, <&clks 44>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| esdhc3: esdhc@53fbc000 { |
| compatible = "fsl,imx35-esdhc"; |
| reg = <0x53fbc000 0x4000>; |
| interrupts = <9>; |
| clocks = <&clks 9>, <&clks 8>, <&clks 45>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| audmux: audmux@53fc4000 { |
| compatible = "fsl,imx35-audmux", "fsl,imx31-audmux"; |
| reg = <0x53fc4000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@53fcc000 { |
| compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; |
| reg = <0x53fcc000 0x4000>; |
| interrupts = <52>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@53fd0000 { |
| compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; |
| reg = <0x53fd0000 0x4000>; |
| interrupts = <51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sdma: sdma@53fd4000 { |
| compatible = "fsl,imx35-sdma"; |
| reg = <0x53fd4000 0x4000>; |
| clocks = <&clks 9>, <&clks 65>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| interrupts = <34>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin"; |
| }; |
| |
| wdog: wdog@53fdc000 { |
| compatible = "fsl,imx35-wdt", "fsl,imx21-wdt"; |
| reg = <0x53fdc000 0x4000>; |
| clocks = <&clks 74>; |
| clock-names = ""; |
| interrupts = <55>; |
| }; |
| |
| can1: can@53fe4000 { |
| compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fe4000 0x1000>; |
| clocks = <&clks 33>; |
| clock-names = "ipg"; |
| interrupts = <43>; |
| status = "disabled"; |
| }; |
| |
| can2: can@53fe8000 { |
| compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fe8000 0x1000>; |
| clocks = <&clks 34>; |
| clock-names = "ipg"; |
| interrupts = <44>; |
| status = "disabled"; |
| }; |
| |
| usbotg: usb@53ff4000 { |
| compatible = "fsl,imx35-usb", "fsl,imx27-usb"; |
| reg = <0x53ff4000 0x0200>; |
| interrupts = <37>; |
| clocks = <&clks 73>; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,usbphy = <&usbphy0>; |
| status = "disabled"; |
| }; |
| |
| usbhost1: usb@53ff4400 { |
| compatible = "fsl,imx35-usb", "fsl,imx27-usb"; |
| reg = <0x53ff4400 0x0200>; |
| interrupts = <35>; |
| clocks = <&clks 73>; |
| fsl,usbmisc = <&usbmisc 1>; |
| fsl,usbphy = <&usbphy1>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@53ff4600 { |
| #index-cells = <1>; |
| compatible = "fsl,imx35-usbmisc"; |
| clocks = <&clks 9>, <&clks 73>, <&clks 28>; |
| clock-names = "ipg", "ahb", "per"; |
| reg = <0x53ff4600 0x00f>; |
| }; |
| }; |
| |
| emi@80000000 { /* External Memory Interface */ |
| compatible = "fsl,emi", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x40000000>; |
| ranges; |
| |
| nfc: nand@bb000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,imx35-nand", "fsl,imx25-nand"; |
| reg = <0xbb000000 0x2000>; |
| clocks = <&clks 29>; |
| clock-names = ""; |
| interrupts = <33>; |
| status = "disabled"; |
| }; |
| |
| weim: weim@b8002000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| clocks = <&clks 0>; |
| compatible = "fsl,imx35-weim", "fsl,imx27-weim"; |
| reg = <0xb8002000 0x1000>; |
| ranges = < |
| 0 0 0xa0000000 0x8000000 |
| 1 0 0xa8000000 0x8000000 |
| 2 0 0xb0000000 0x2000000 |
| 3 0 0xb2000000 0x2000000 |
| 4 0 0xb4000000 0x2000000 |
| 5 0 0xb6000000 0x2000000 |
| >; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usbphy { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| usbphy0: usb-phy@0 { |
| reg = <0>; |
| compatible = "usb-nop-xceiv"; |
| }; |
| |
| usbphy1: usb-phy@1 { |
| reg = <1>; |
| compatible = "usb-nop-xceiv"; |
| }; |
| }; |
| }; |