| /* |
| * Suppport for CompuLab SBC-T3517 with CM-T3517 |
| */ |
| |
| #include "omap3-cm-t3517.dts" |
| #include "omap3-sb-t35.dtsi" |
| |
| / { |
| model = "CompuLab SBC-T3517 with CM-T3517"; |
| compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; |
| |
| /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ |
| vddvario: regulator-vddvario-sb-t35 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vddvario"; |
| regulator-always-on; |
| }; |
| |
| vdd33a: regulator-vdd33a-sb-t35 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd33a"; |
| regulator-always-on; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &sb_t35_usb_hub_pins |
| &usb_hub_pins |
| >; |
| |
| mmc1_aux_pins: pinmux_mmc1_aux_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */ |
| OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */ |
| >; |
| }; |
| |
| sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */ |
| >; |
| }; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &mmc1_pins |
| &mmc1_aux_pins |
| >; |
| |
| wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ |
| cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ |
| }; |