[PATCH] ata_piix: convert sata to new reset mechanism
Convert ata_piix sata ->phy_reset to new reset mechanism.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index d79c252..c662bf5 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -132,7 +132,7 @@
const struct pci_device_id *ent);
static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
-static void piix_sata_phy_reset(struct ata_port *ap);
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -235,7 +235,7 @@
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_sata_phy_reset,
+ .probe_reset = piix_sata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -272,8 +272,8 @@
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -297,8 +297,7 @@
/* ich6_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED_ICH6 |
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -309,8 +308,7 @@
/* ich6_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED_ICH6 |
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
@@ -448,28 +446,25 @@
}
/**
- * piix_sata_phy_reset - Probe specified port on SATA host controller
- * @ap: Port to probe
+ * piix_sata_probe_reset - Perform reset on SATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
*
- * Probe SATA phy.
+ * Reset SATA phy and classify attached devices.
*
* LOCKING:
* None (inherited from caller).
*/
-
-static void piix_sata_phy_reset(struct ata_port *ap)
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if (!piix_sata_probe(ap)) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
- return;
+ return 0;
}
- ap->cbl = ATA_CBL_SATA;
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**