sparc32: Kill totally unused memory information tables.
The code in arch/sparc/prom/memory.c computes three tables, the list
of total memory, the list of available memory (total minus what
firmware is using), and the list of firmware taken memory.
Only the available memory list is even used.
Therefore, kill those unused tables and make prom_meminfo() return
just the available memory list.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index e4d9c8e..f25876a 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -55,7 +55,7 @@
register int i;
i = 0;
- mlist= *prom_meminfo()->v0_available;
+ mlist= prom_meminfo();
bytes = tally = mlist->num_bytes;
base_paddr = (unsigned long) mlist->start_adr;
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index b0c0f9c..08ac1bf 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -1,5 +1,4 @@
-/* $Id: memory.c,v 1.15 2000/01/29 01:09:12 anton Exp $
- * memory.c: Prom routine for acquiring various bits of information
+/* memory.c: Prom routine for acquiring various bits of information
* about RAM on the machine, both virtual and physical.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -22,19 +21,9 @@
*/
struct linux_prom_registers prom_reg_memlist[64];
-struct linux_prom_registers prom_reg_tmp[64];
-struct linux_mlist_v0 prom_phys_total[64];
-struct linux_mlist_v0 prom_prom_taken[64];
struct linux_mlist_v0 prom_phys_avail[64];
-struct linux_mlist_v0 *prom_ptot_ptr = prom_phys_total;
-struct linux_mlist_v0 *prom_ptak_ptr = prom_prom_taken;
-struct linux_mlist_v0 *prom_pavl_ptr = prom_phys_avail;
-
-struct linux_mem_v0 prom_memlist;
-
-
/* Internal Prom library routine to sort a linux_mlist_v0 memory
* list. Used below in initialization.
*/
@@ -77,23 +66,6 @@
switch(prom_vers) {
case PROM_V0:
/* Nice, kind of easier to do in this case. */
- /* First, the total physical descriptors. */
- for(mptr = (*(romvec->pv_v0mem.v0_totphys)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_phys_total[iter].start_adr = mptr->start_adr;
- prom_phys_total[iter].num_bytes = mptr->num_bytes;
- prom_phys_total[iter].theres_more = &prom_phys_total[iter+1];
- }
- prom_phys_total[iter-1].theres_more = NULL;
- /* Second, the total prom taken descriptors. */
- for(mptr = (*(romvec->pv_v0mem.v0_prommap)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_prom_taken[iter].start_adr = mptr->start_adr;
- prom_prom_taken[iter].num_bytes = mptr->num_bytes;
- prom_prom_taken[iter].theres_more = &prom_prom_taken[iter+1];
- }
- prom_prom_taken[iter-1].theres_more = NULL;
- /* Last, the available physical descriptors. */
for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0;
mptr; mptr=mptr->theres_more, iter++) {
prom_phys_avail[iter].start_adr = mptr->start_adr;
@@ -101,9 +73,6 @@
prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1];
}
prom_phys_avail[iter-1].theres_more = NULL;
- /* Sort all the lists. */
- prom_sortmemlist(prom_phys_total);
- prom_sortmemlist(prom_prom_taken);
prom_sortmemlist(prom_phys_avail);
break;
case PROM_V2:
@@ -124,69 +93,12 @@
&prom_phys_avail[iter+1];
}
prom_phys_avail[iter-1].theres_more = NULL;
-
- num_regs = prom_getproperty(node, "reg",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
- for(iter=0; iter<num_regs; iter++) {
- prom_phys_total[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_phys_total[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_phys_total[iter].theres_more =
- &prom_phys_total[iter+1];
- }
- prom_phys_total[iter-1].theres_more = NULL;
-
- node = prom_getchild(prom_root_node);
- node = prom_searchsiblings(node, "virtual-memory");
- num_regs = prom_getproperty(node, "available",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
-
- /* Convert available virtual areas to taken virtual
- * areas. First sort, then convert.
- */
- for(iter=0; iter<num_regs; iter++) {
- prom_prom_taken[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_prom_taken[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_prom_taken[iter].theres_more =
- &prom_prom_taken[iter+1];
- }
- prom_prom_taken[iter-1].theres_more = NULL;
-
- prom_sortmemlist(prom_prom_taken);
-
- /* Finally, convert. */
- for(iter=0; iter<num_regs; iter++) {
- prom_prom_taken[iter].start_adr =
- prom_prom_taken[iter].start_adr +
- prom_prom_taken[iter].num_bytes;
- prom_prom_taken[iter].num_bytes =
- prom_prom_taken[iter+1].start_adr -
- prom_prom_taken[iter].start_adr;
- }
- prom_prom_taken[iter-1].num_bytes =
- 0xffffffff - (unsigned long) prom_prom_taken[iter-1].start_adr;
-
- /* Sort the other two lists. */
- prom_sortmemlist(prom_phys_total);
prom_sortmemlist(prom_phys_avail);
break;
case PROM_SUN4:
#ifdef CONFIG_SUN4
/* how simple :) */
- prom_phys_total[0].start_adr = NULL;
- prom_phys_total[0].num_bytes = *(sun4_romvec->memorysize);
- prom_phys_total[0].theres_more = NULL;
- prom_prom_taken[0].start_adr = NULL;
- prom_prom_taken[0].num_bytes = 0x0;
- prom_prom_taken[0].theres_more = NULL;
prom_phys_avail[0].start_adr = NULL;
prom_phys_avail[0].num_bytes = *(sun4_romvec->memoryavail);
prom_phys_avail[0].theres_more = NULL;
@@ -196,20 +108,13 @@
default:
break;
};
-
- /* Link all the lists into the top-level descriptor. */
- prom_memlist.v0_totphys=&prom_ptot_ptr;
- prom_memlist.v0_prommap=&prom_ptak_ptr;
- prom_memlist.v0_available=&prom_pavl_ptr;
-
- return;
}
/* This returns a pointer to our libraries internal v0 format
- * memory descriptor.
+ * available memory list.
*/
-struct linux_mem_v0 *
+struct linux_mlist_v0 *
prom_meminfo(void)
{
- return &prom_memlist;
+ return prom_phys_avail;
}
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
index 17ba82ee..6ff1a3b 100644
--- a/include/asm-sparc/oplib.h
+++ b/include/asm-sparc/oplib.h
@@ -86,17 +86,10 @@
/* Machine memory configuration routine. */
-/* This function returns a V0 format memory descriptor table, it has three
- * entries. One for the total amount of physical ram on the machine, one
- * for the amount of physical ram available, and one describing the virtual
- * areas which are allocated by the prom. So, in a sense the physical
- * available is a calculation of the total physical minus the physical mapped
- * by the prom with virtual mappings.
- *
- * These lists are returned pre-sorted, this should make your life easier
- * since the prom itself is way too lazy to do such nice things.
+/* This function returns a V0 format available memory descriptor entry.
+ * This list is pre-sorted,
*/
-extern struct linux_mem_v0 *prom_meminfo(void);
+extern struct linux_mlist_v0 *prom_meminfo(void);
/* Miscellaneous routines, don't really fit in any category per se. */