ARM: dts: msm: Add Hx8399 panel support fo QRD670 SKU2
QRD670 SKU2 use Hx8399 panel, so add the config files.
Change-Id: Ibad1601b5795ba70ccf3affa8b0f5298eb58a02e
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi b/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
index 7e426cf..e45dbdc 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi
@@ -1,4 +1,4 @@
-/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -26,6 +26,7 @@
#include "dsi-panel-nt35695b-truly-fhd-cmd.dtsi"
#include "dsi-panel-rm67195-amoled-fhd-cmd.dtsi"
#include "dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi"
+#include "dsi-panel-hx8399-truly-singlemipi-fhd-video.dtsi"
#include <dt-bindings/clock/mdss-10nm-pll-clk.h>
&soc {
@@ -465,6 +466,29 @@
ibb-supply = <&lcdb_ncp_vreg>;
};
+ dsi_hx8399_truly_cmd_display: qcom,dsi-display@16 {
+ compatible = "qcom,dsi-display";
+ label = "dsi_hx8399_truly_cmd_display";
+ qcom,display-type = "primary";
+
+ qcom,dsi-ctrl = <&mdss_dsi0>;
+ qcom,dsi-phy = <&mdss_dsi_phy0>;
+ clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>,
+ <&mdss_dsi0_pll PCLK_MUX_0_CLK>;
+ clock-names = "src_byte_clk", "src_pixel_clk";
+
+ pinctrl-names = "panel_active", "panel_suspend";
+ pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+ pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+ qcom,platform-te-gpio = <&tlmm 10 0>;
+ qcom,platform-reset-gpio = <&tlmm 75 0>;
+
+ qcom,dsi-panel = <&dsi_hx8399_truly_cmd>;
+ vddio-supply = <&pm660_l11>;
+ lab-supply = <&lcdb_ldo_vreg>;
+ ibb-supply = <&lcdb_ncp_vreg>;
+ };
+
sde_wb: qcom,wb-display@0 {
compatible = "qcom,wb-display";
cell-index = <0>;
@@ -813,3 +837,16 @@
};
};
};
+
+&dsi_hx8399_truly_cmd {
+ qcom,mdss-dsi-t-clk-post = <0x0E>;
+ qcom,mdss-dsi-t-clk-pre = <0x30>;
+ qcom,mdss-dsi-display-timings {
+ timing@0 {
+ qcom,mdss-dsi-panel-phy-timings = [00 1f 08 08 24 22 08
+ 08 05 03 04 00];
+ qcom,display-topology = <1 0 1>;
+ qcom,default-topology-index = <0>;
+ };
+ };
+};