mtd: nand: jz4740: Convert to GPIO descriptor API
Use the GPIO descriptor API instead of the deprecated legacy GPIO API to
manage the busy GPIO.
The patch updates both the jz4740 nand driver and the only user of the driver
the qi-lb60 board driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index 986982d..79cff26 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -27,8 +27,6 @@
struct nand_ecclayout *ecc_layout;
- unsigned int busy_gpio;
-
unsigned char banks[JZ_NAND_NUM_BANKS];
void (*ident_callback)(struct platform_device *, struct nand_chip *,
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index c454525..9dd051e 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -140,10 +140,18 @@
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
.ident_callback = qi_lb60_nand_ident,
- .busy_gpio = 94,
.banks = { 1 },
};
+static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
+ .dev_id = "jz4740-nand.0",
+ .table = {
+ GPIO_LOOKUP("Bank C", 30, "busy", 0),
+ { },
+ },
+};
+
+
/* Keyboard*/
#define KEY_QI_QI KEY_F13
@@ -472,6 +480,7 @@
jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
+ gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
jz4740_serial_device_register();
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 1633ec9..ebf2cce 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -69,7 +69,7 @@
int selected_bank;
- struct jz_nand_platform_data *pdata;
+ struct gpio_desc *busy_gpio;
bool is_reading;
};
@@ -131,7 +131,7 @@
static int jz_nand_dev_ready(struct mtd_info *mtd)
{
struct jz_nand *nand = mtd_to_jz_nand(mtd);
- return gpio_get_value_cansleep(nand->pdata->busy_gpio);
+ return gpiod_get_value_cansleep(nand->busy_gpio);
}
static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
@@ -423,14 +423,12 @@
if (ret)
goto err_free;
- if (pdata && gpio_is_valid(pdata->busy_gpio)) {
- ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to request busy gpio %d: %d\n",
- pdata->busy_gpio, ret);
- goto err_iounmap_mmio;
- }
+ nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
+ ret);
+ goto err_iounmap_mmio;
}
mtd = &nand->mtd;
@@ -454,10 +452,9 @@
chip->cmd_ctrl = jz_nand_cmd_ctrl;
chip->select_chip = jz_nand_select_chip;
- if (pdata && gpio_is_valid(pdata->busy_gpio))
+ if (nand->busy_gpio)
chip->dev_ready = jz_nand_dev_ready;
- nand->pdata = pdata;
platform_set_drvdata(pdev, nand);
/* We are going to autodetect NAND chips in the banks specified in the
@@ -496,7 +493,7 @@
}
if (chipnr == 0) {
dev_err(&pdev->dev, "No NAND chips found\n");
- goto err_gpio_busy;
+ goto err_iounmap_mmio;
}
if (pdata && pdata->ident_callback) {
@@ -533,9 +530,6 @@
nand->bank_base[bank - 1]);
}
writel(0, nand->base + JZ_REG_NAND_CTRL);
-err_gpio_busy:
- if (pdata && gpio_is_valid(pdata->busy_gpio))
- gpio_free(pdata->busy_gpio);
err_iounmap_mmio:
jz_nand_iounmap_resource(nand->mem, nand->base);
err_free:
@@ -546,7 +540,6 @@
static int jz_nand_remove(struct platform_device *pdev)
{
struct jz_nand *nand = platform_get_drvdata(pdev);
- struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
size_t i;
nand_release(&nand->mtd);
@@ -562,8 +555,6 @@
gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
}
}
- if (pdata && gpio_is_valid(pdata->busy_gpio))
- gpio_free(pdata->busy_gpio);
jz_nand_iounmap_resource(nand->mem, nand->base);