V4L/DVB (3774): Create V4L1 config options

V4L1 API is depreciated and should be removed soon from kernel. This patch
adds two new options, one to disable V4L1 drivers, and another to disable
V4L1 compat module. This way, it would be easy to check what still depends
on V4L1 stuff, allowing also to test if app works fine with V4L2 only support.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be3..3fff757 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@
 
 config RADIO_CADET
 	tristate "ADS Cadet AM/FM Tuner"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these AM/FM radio cards, and then
 	  fill in the port address below.
@@ -25,7 +25,7 @@
 
 config RADIO_RTRACK
 	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -59,7 +59,7 @@
 
 config RADIO_RTRACK2
 	tristate "AIMSlab RadioTrack II support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -82,7 +82,7 @@
 
 config RADIO_AZTECH
 	tristate "Aztech/Packard Bell Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -106,7 +106,7 @@
 
 config RADIO_GEMTEK
 	tristate "GemTek Radio Card support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -131,7 +131,7 @@
 
 config RADIO_GEMTEK_PCI
 	tristate "GemTek PCI Radio Card support"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this PCI FM radio card.
 
@@ -145,7 +145,7 @@
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this radio card.  This card may also be
 	  found as Gemtek PCI FM.
@@ -160,7 +160,7 @@
 
 config RADIO_MAESTRO
 	tristate "Maestro on board radio"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  Say Y here to directly support the on-board radio tuner on the
 	  Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+	depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
 	---help---
 	  Choose Y here if you have this FM radio card. You also need to say Y
 	  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@
 
 config RADIO_SF16FMI
 	tristate "SF16FMI Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.  If you
 	  compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 
@@ -239,7 +239,7 @@
 
 config RADIO_TERRATEC
 	tristate "TerraTec ActiveRadio ISA Standalone"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below. (TODO)
@@ -268,7 +268,7 @@
 
 config RADIO_TRUST
 	tristate "Trust FM radio card"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	help
 	  This is a driver for the Trust FM radio cards. Say Y if you have
 	  such a card and want to use it under Linux.
@@ -286,7 +286,7 @@
 
 config RADIO_TYPHOON
 	tristate "Typhoon Radio (a.k.a. EcoRadio)"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@
 
 config RADIO_ZOLTRIX
 	tristate "Zoltrix Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.