drm/i915: Disable HPD interrupt on pin when irq storm is detected (v3)
This patch disables hotplug interrupts if an 'interrupt storm'
has been detected.
Noise on the interrupt line renders the hotplug interrupt useless:
each hotplug event causes the devices to be rescanned which will
will only increase the system load.
Thus disable the hotplug interrupts and fall back to periodic
device polling.
v2: Fixed cleanup typo.
v3: Fixed format issues, clarified a variable name,
changed pr_warn() to DRM_INFO() as suggested by
Jani Nikula <jani.nikula@linux.intel.com>.
Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b59df6e..565ea96 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -88,7 +88,8 @@
[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
};
-
+static void ibx_hpd_irq_setup(struct drm_device *dev);
+static void i915_hpd_irq_setup(struct drm_device *dev);
/* For display hotplug interrupt */
static void
@@ -342,7 +343,11 @@
hotplug_work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
- struct intel_encoder *encoder;
+ struct intel_connector *intel_connector;
+ struct intel_encoder *intel_encoder;
+ struct drm_connector *connector;
+ unsigned long irqflags;
+ bool hpd_disabled = false;
/* HPD irq before everything is fully set up. */
if (!dev_priv->enable_hotplug_processing)
@@ -351,9 +356,33 @@
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
- list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
- if (encoder->hot_plug)
- encoder->hot_plug(encoder);
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ intel_connector = to_intel_connector(connector);
+ intel_encoder = intel_connector->encoder;
+ if (intel_encoder->hpd_pin > HPD_NONE &&
+ dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_MARK_DISABLED &&
+ connector->polled == DRM_CONNECTOR_POLL_HPD) {
+ DRM_INFO("HPD interrupt storm detected on connector %s: "
+ "switching from hotplug detection to polling\n",
+ drm_get_connector_name(connector));
+ dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark = HPD_DISABLED;
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT
+ | DRM_CONNECTOR_POLL_DISCONNECT;
+ hpd_disabled = true;
+ }
+ }
+ /* if there were no outputs to poll, poll was disabled,
+ * therefore make sure it's enabled when disabling HPD on
+ * some connectors */
+ if (hpd_disabled)
+ drm_kms_helper_poll_enable(dev);
+
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ if (intel_encoder->hot_plug)
+ intel_encoder->hot_plug(intel_encoder);
mutex_unlock(&mode_config->mutex);
@@ -585,13 +614,14 @@
#define HPD_STORM_DETECT_PERIOD 1000
#define HPD_STORM_THRESHOLD 5
-static inline void hotplug_irq_storm_detect(struct drm_device *dev,
+static inline bool hotplug_irq_storm_detect(struct drm_device *dev,
u32 hotplug_trigger,
const u32 *hpd)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long irqflags;
int i;
+ bool ret = false;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
@@ -609,12 +639,15 @@
} else if (dev_priv->hpd_stats[i].hpd_cnt > HPD_STORM_THRESHOLD) {
dev_priv->hpd_stats[i].hpd_mark = HPD_MARK_DISABLED;
DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i);
+ ret = true;
} else {
dev_priv->hpd_stats[i].hpd_cnt++;
}
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+ return ret;
}
static void gmbus_irq_handler(struct drm_device *dev)
@@ -690,7 +723,8 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_trigger) {
- hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915);
+ if (hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915))
+ i915_hpd_irq_setup(dev);
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
}
@@ -720,7 +754,8 @@
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK;
if (hotplug_trigger) {
- hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_ibx);
+ if (hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_ibx))
+ ibx_hpd_irq_setup(dev);
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
}
if (pch_iir & SDE_AUDIO_POWER_MASK)
@@ -768,7 +803,8 @@
u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT;
if (hotplug_trigger) {
- hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_cpt);
+ if (hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_cpt))
+ ibx_hpd_irq_setup(dev);
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
}
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
@@ -2130,11 +2166,13 @@
if (HAS_PCH_IBX(dev)) {
mask &= ~SDE_HOTPLUG_MASK;
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
- mask |= hpd_ibx[intel_encoder->hpd_pin];
+ if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
+ mask |= hpd_ibx[intel_encoder->hpd_pin];
} else {
mask &= ~SDE_HOTPLUG_MASK_CPT;
list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
- mask |= hpd_cpt[intel_encoder->hpd_pin];
+ if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
+ mask |= hpd_cpt[intel_encoder->hpd_pin];
}
I915_WRITE(SDEIMR, ~mask);
@@ -2669,7 +2707,8 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_trigger) {
- hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915);
+ if (hotplug_irq_storm_detect(dev, hotplug_trigger, hpd_status_i915))
+ i915_hpd_irq_setup(dev);
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
}
@@ -2819,7 +2858,7 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
- struct intel_encoder *encoder;
+ struct intel_encoder *intel_encoder;
u32 hotplug_en;
if (I915_HAS_HOTPLUG(dev)) {
@@ -2827,8 +2866,9 @@
hotplug_en &= ~HOTPLUG_INT_EN_MASK;
/* Note HDMI and DP share hotplug bits */
/* enable bits are the same for all generations */
- list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
- hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
+ hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
@@ -2906,8 +2946,9 @@
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_trigger) {
- hotplug_irq_storm_detect(dev, hotplug_trigger,
- IS_G4X(dev) ? hpd_status_gen4 : hpd_status_i965);
+ if (hotplug_irq_storm_detect(dev, hotplug_trigger,
+ IS_G4X(dev) ? hpd_status_gen4 : hpd_status_i965))
+ i915_hpd_irq_setup(dev);
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
}