Merge branch 'virtio_mac'
Amos Kong says:
====================
Currenly mac is programmed byte by byte. This means that we
have an intermediate step where mac is wrong.
Third patch introduced a new vq control command to set mac
address, it's atomic.
V2: check return of sending command, delay eth_mac_addr()
V3: restore software address when fail to set hardware address
V4: split eth_mac_addr, fix error handle
V5: rebase patches to net-next tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index a6fcf15..701408a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -753,19 +753,77 @@
return NETDEV_TX_OK;
}
+/*
+ * Send command via the control virtqueue and check status. Commands
+ * supported by the hypervisor, as indicated by feature bits, should
+ * never fail unless improperly formated.
+ */
+static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
+ struct scatterlist *data, int out, int in)
+{
+ struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+ struct virtio_net_ctrl_hdr ctrl;
+ virtio_net_ctrl_ack status = ~0;
+ unsigned int tmp;
+ int i;
+
+ /* Caller should know better */
+ BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ||
+ (out + in > VIRTNET_SEND_COMMAND_SG_MAX));
+
+ out++; /* Add header */
+ in++; /* Add return status */
+
+ ctrl.class = class;
+ ctrl.cmd = cmd;
+
+ sg_init_table(sg, out + in);
+
+ sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
+ for_each_sg(data, s, out + in - 2, i)
+ sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
+ sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
+
+ BUG_ON(virtqueue_add_buf(vi->cvq, sg, out, in, vi, GFP_ATOMIC) < 0);
+
+ virtqueue_kick(vi->cvq);
+
+ /* Spin for a response, the kick causes an ioport write, trapping
+ * into the hypervisor, so the request should be handled immediately.
+ */
+ while (!virtqueue_get_buf(vi->cvq, &tmp))
+ cpu_relax();
+
+ return status == VIRTIO_NET_OK;
+}
+
static int virtnet_set_mac_address(struct net_device *dev, void *p)
{
struct virtnet_info *vi = netdev_priv(dev);
struct virtio_device *vdev = vi->vdev;
int ret;
+ struct sockaddr *addr = p;
+ struct scatterlist sg;
- ret = eth_mac_addr(dev, p);
+ ret = eth_prepare_mac_addr_change(dev, p);
if (ret)
return ret;
- if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
+ sg_init_one(&sg, addr->sa_data, dev->addr_len);
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
+ VIRTIO_NET_CTRL_MAC_ADDR_SET,
+ &sg, 1, 0)) {
+ dev_warn(&vdev->dev,
+ "Failed to set mac address by vq command.\n");
+ return -EINVAL;
+ }
+ } else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
- dev->dev_addr, dev->addr_len);
+ addr->sa_data, dev->addr_len);
+ }
+
+ eth_commit_mac_addr_change(dev, p);
return 0;
}
@@ -819,51 +877,6 @@
}
#endif
-/*
- * Send command via the control virtqueue and check status. Commands
- * supported by the hypervisor, as indicated by feature bits, should
- * never fail unless improperly formated.
- */
-static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
- struct scatterlist *data, int out, int in)
-{
- struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
- struct virtio_net_ctrl_hdr ctrl;
- virtio_net_ctrl_ack status = ~0;
- unsigned int tmp;
- int i;
-
- /* Caller should know better */
- BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ||
- (out + in > VIRTNET_SEND_COMMAND_SG_MAX));
-
- out++; /* Add header */
- in++; /* Add return status */
-
- ctrl.class = class;
- ctrl.cmd = cmd;
-
- sg_init_table(sg, out + in);
-
- sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
- for_each_sg(data, s, out + in - 2, i)
- sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
- sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
-
- BUG_ON(virtqueue_add_buf(vi->cvq, sg, out, in, vi, GFP_ATOMIC) < 0);
-
- virtqueue_kick(vi->cvq);
-
- /*
- * Spin for a response, the kick causes an ioport write, trapping
- * into the hypervisor, so the request should be handled immediately.
- */
- while (!virtqueue_get_buf(vi->cvq, &tmp))
- cpu_relax();
-
- return status == VIRTIO_NET_OK;
-}
-
static void virtnet_ack_link_announce(struct virtnet_info *vi)
{
rtnl_lock();
@@ -1628,6 +1641,7 @@
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
+ VIRTIO_NET_F_CTRL_MAC_ADDR,
};
static struct virtio_driver virtio_net_driver = {
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 1a43e1b..c623861 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -40,6 +40,8 @@
extern void eth_header_cache_update(struct hh_cache *hh,
const struct net_device *dev,
const unsigned char *haddr);
+extern int eth_prepare_mac_addr_change(struct net_device *dev, void *p);
+extern void eth_commit_mac_addr_change(struct net_device *dev, void *p);
extern int eth_mac_addr(struct net_device *dev, void *p);
extern int eth_change_mtu(struct net_device *dev, int new_mtu);
extern int eth_validate_addr(struct net_device *dev);
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 848e358..a5a8c88 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -53,6 +53,7 @@
* network */
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
* Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
@@ -127,7 +128,7 @@
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
- * Control the MAC filter table.
+ * Control the MAC
*
* The MAC filter table is managed by the hypervisor, the guest should
* assume the size is infinite. Filtering should be considered
@@ -140,6 +141,10 @@
* first sg list contains unicast addresses, the second is for multicast.
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
* is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
*/
struct virtio_net_ctrl_mac {
__u32 entries;
@@ -148,6 +153,7 @@
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/*
* Control VLAN filtering
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index bc39c8c..a36c85ea 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -272,6 +272,36 @@
EXPORT_SYMBOL(eth_header_cache_update);
/**
+ * eth_prepare_mac_addr_change - prepare for mac change
+ * @dev: network device
+ * @p: socket address
+ */
+int eth_prepare_mac_addr_change(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev))
+ return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+ return 0;
+}
+EXPORT_SYMBOL(eth_prepare_mac_addr_change);
+
+/**
+ * eth_commit_mac_addr_change - commit mac change
+ * @dev: network device
+ * @p: socket address
+ */
+void eth_commit_mac_addr_change(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+}
+EXPORT_SYMBOL(eth_commit_mac_addr_change);
+
+/**
* eth_mac_addr - set new Ethernet hardware address
* @dev: network device
* @p: socket address
@@ -283,13 +313,12 @@
*/
int eth_mac_addr(struct net_device *dev, void *p)
{
- struct sockaddr *addr = p;
+ int ret;
- if (!(dev->priv_flags & IFF_LIVE_ADDR_CHANGE) && netif_running(dev))
- return -EBUSY;
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
- memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ ret = eth_prepare_mac_addr_change(dev, p);
+ if (ret < 0)
+ return ret;
+ eth_commit_mac_addr_change(dev, p);
return 0;
}
EXPORT_SYMBOL(eth_mac_addr);