arch/arm/mach-ux500/cpu-db8500.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2008-2009 ST-Ericsson SA
  *
  * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
  * published by the Free Software Foundation.
  *
  */
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/regulator/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/random.h>

 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>

 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"

 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"

 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
 };
 /*  U8500 and U9540 common io_desc */
 static struct map_desc u8500_common_io_desc[] __initdata = {
 	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
 	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),

 	__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),

 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
 };

 /* U8500 IO map specific description */
 static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),

 };

 /* U9540 IO map specific description */
 static struct map_desc u9540_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
 	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
 };

 void __init u8500_map_io(void)
 {
 	/*
 	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
 	 */
 	iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));

 	ux500_map_io();

 	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));

 	if (cpu_is_ux540_family())
 		iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
 	else
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 }

 static struct resource db8500_pmu_resources[] = {
 	[0] = {
 		.start		= IRQ_DB8500_PMU,
 		.end		= IRQ_DB8500_PMU,
 		.flags		= IORESOURCE_IRQ,
 	},
 };

 /*
  * The PMU IRQ lines of two cores are wired together into a single interrupt.
  * Bounce the interrupt to the other core if it's not ours.
  */
 static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
 {
 	irqreturn_t ret = handler(irq, dev);
 	int other = !smp_processor_id();

 	if (ret == IRQ_NONE && cpu_online(other))
 		irq_set_affinity(irq, cpumask_of(other));

 	/*
 	 * We should be able to get away with the amount of IRQ_NONEs we give,
 	 * while still having the spurious IRQ detection code kick in if the
 	 * interrupt really starts hitting spuriously.
 	 */
 	return ret;
 }

 struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };

 static struct platform_device db8500_pmu_device = {
 	.name			= "arm-pmu",
 	.id			= -1,
 	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
 	.resource		= db8500_pmu_resources,
 	.dev.platform_data	= &db8500_pmu_platdata,
 };

 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_dma40_device,
 	&db8500_pmu_device,
 };

 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
 	U8500_GPIOBANK2_BASE,
 	U8500_GPIOBANK3_BASE,
 	U8500_GPIOBANK4_BASE,
 	U8500_GPIOBANK5_BASE,
 	U8500_GPIOBANK6_BASE,
 	U8500_GPIOBANK7_BASE,
 	U8500_GPIOBANK8_BASE,
 };

 static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};

 	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
 }

 static int usb_db8500_rx_dma_cfg[] = {
 	DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
 	DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
 	DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
 	DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
 	DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
 	DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
 	DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
 	DB8500_DMA_DEV39_USB_OTG_IEP_8
 };

 static int usb_db8500_tx_dma_cfg[] = {
 	DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
 	DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
 	DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
 	DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
 	DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
 	DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
 	DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
 	DB8500_DMA_DEV39_USB_OTG_OEP_8
 };

 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid = __io_address(U8500_BB_UID_BASE);

 	/* Throw these device-specific numbers into the entropy pool */
 	add_device_randomness(uid, 0x14);
 	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
 			 readl((u32 *)uid+0),
 			 readl((u32 *)uid+1), readl((u32 *)uid+2),
 			 readl((u32 *)uid+3), readl((u32 *)uid+4));
 }

 static struct device * __init db8500_soc_device_init(void)
 {
 	const char *soc_id = db8500_read_soc_id();

 	return ux500_soc_device_init(soc_id);
 }

 /*
  * This function is called from the board init
  */
 struct device * __init u8500_init_devices(void)
 {
 	struct device *parent;
 	int i;

 	parent = db8500_soc_device_init();

 	db8500_add_rtc(parent);
 	db8500_add_gpios(parent);
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);

 	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
 		platform_devs[i]->dev.parent = parent;

 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

 	return parent;
 }

 #ifdef CONFIG_MACH_UX500_DT

 /* TODO: Once all pieces are DT:ed, remove completely. */
 static struct device * __init u8500_of_init_devices(void)
 {
 	struct device *parent = db8500_soc_device_init();

 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);

 	u8500_dma40_device.dev.parent = parent;

 	/*
 	 * Devices to be DT:ed:
 	 *   u8500_dma40_device  = todo
 	 *   db8500_pmu_device   = done
 	 *   db8500_prcmu_device = done
 	 */
 	platform_device_register(&u8500_dma40_device);

 	return parent;
 }

 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
 	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
 	/* Requires clock name and DMA bindings. */
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
 		"ux500-msp-i2s.0", &msp0_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
 		"ux500-msp-i2s.1", &msp1_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
 		"ux500-msp-i2s.2", &msp2_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		"ux500-msp-i2s.3", &msp3_platform_data),
 	{},
 };

 static const struct of_device_id u8500_local_bus_nodes[] = {
 	/* only create devices below soc node */
 	{ .compatible = "stericsson,db8500", },
 	{ .compatible = "stericsson,db8500-prcmu", },
 	{ .compatible = "simple-bus"},
 	{ },
 };

 static void __init u8500_init_machine(void)
 {
 	struct device *parent = NULL;

 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
 	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
 		mop500_snowball_ethernet_clock_enable();
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */

 	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
 	parent = u8500_of_init_devices();

 	/* automatically probe child nodes of db8500 device */
 	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
 }

 static const char * stericsson_dt_platform_compat[] = {
 	"st-ericsson,u8500",
 	"st-ericsson,u8540",
 	"st-ericsson,u9500",
 	"st-ericsson,u9540",
 	NULL,
 };

 DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.smp            = smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
 MACHINE_END

 #endif
	/*
	* Copyright (C) 2008-2009 ST-Ericsson SA
	*
	* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2, as
	* published by the Free Software Foundation.
	*
	*/
	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/device.h>
	#include <linux/amba/bus.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>
	#include <linux/platform_device.h>
	#include <linux/io.h>
	#include <linux/mfd/abx500/ab8500.h>
	#include <linux/mfd/dbx500-prcmu.h>
	#include <linux/of.h>
	#include <linux/of_platform.h>
	#include <linux/regulator/machine.h>
	#include <linux/platform_data/pinctrl-nomadik.h>
	#include <linux/random.h>

	#include <asm/pmu.h>
	#include <asm/mach/map.h>
	#include <asm/mach/arch.h>

	#include "setup.h"
	#include "devices.h"
	#include "irqs.h"

	#include "devices-db8500.h"
	#include "ste-dma40-db8500.h"
	#include "db8500-regs.h"
	#include "board-mop500.h"
	#include "id.h"

	/* minimum static i/o mapping required to boot U8500 platforms */
	static struct map_desc u8500_uart_io_desc[] __initdata = {
	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
	};
	/* U8500 and U9540 common io_desc */
	static struct map_desc u8500_common_io_desc[] __initdata = {
	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),

	__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),

	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
	};

	/* U8500 IO map specific description */
	static struct map_desc u8500_io_desc[] __initdata = {
	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),

	};

	/* U9540 IO map specific description */
	static struct map_desc u9540_io_desc[] __initdata = {
	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
	};

	void __init u8500_map_io(void)
	{
	/*
	* Map the UARTs early so that the DEBUG_LL stuff continues to work.
	*/
	iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));

	ux500_map_io();

	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));

	if (cpu_is_ux540_family())
	iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
	else
	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
	}

	static struct resource db8500_pmu_resources[] = {
	[0] = {
	.start = IRQ_DB8500_PMU,
	.end = IRQ_DB8500_PMU,
	.flags = IORESOURCE_IRQ,
	},
	};

	/*
	* The PMU IRQ lines of two cores are wired together into a single interrupt.
	* Bounce the interrupt to the other core if it's not ours.
	*/
	static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
	{
	irqreturn_t ret = handler(irq, dev);
	int other = !smp_processor_id();

	if (ret == IRQ_NONE && cpu_online(other))
	irq_set_affinity(irq, cpumask_of(other));

	/*
	* We should be able to get away with the amount of IRQ_NONEs we give,
	* while still having the spurious IRQ detection code kick in if the
	* interrupt really starts hitting spuriously.
	*/
	return ret;
	}

	struct arm_pmu_platdata db8500_pmu_platdata = {
	.handle_irq = db8500_pmu_handler,
	};

	static struct platform_device db8500_pmu_device = {
	.name = "arm-pmu",
	.id = -1,
	.num_resources = ARRAY_SIZE(db8500_pmu_resources),
	.resource = db8500_pmu_resources,
	.dev.platform_data = &db8500_pmu_platdata,
	};

	static struct platform_device *platform_devs[] __initdata = {
	&u8500_dma40_device,
	&db8500_pmu_device,
	};

	static resource_size_t __initdata db8500_gpio_base[] = {
	U8500_GPIOBANK0_BASE,
	U8500_GPIOBANK1_BASE,
	U8500_GPIOBANK2_BASE,
	U8500_GPIOBANK3_BASE,
	U8500_GPIOBANK4_BASE,
	U8500_GPIOBANK5_BASE,
	U8500_GPIOBANK6_BASE,
	U8500_GPIOBANK7_BASE,
	U8500_GPIOBANK8_BASE,
	};

	static void __init db8500_add_gpios(struct device *parent)
	{
	struct nmk_gpio_platform_data pdata = {
	.supports_sleepmode = true,
	};

	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
	IRQ_DB8500_GPIO0, &pdata);
	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
	}

	static int usb_db8500_rx_dma_cfg[] = {
	DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
	DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
	DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
	DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
	DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
	DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
	DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
	DB8500_DMA_DEV39_USB_OTG_IEP_8
	};

	static int usb_db8500_tx_dma_cfg[] = {
	DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
	DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
	DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
	DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
	DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
	DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
	DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
	DB8500_DMA_DEV39_USB_OTG_OEP_8
	};

	static const char *db8500_read_soc_id(void)
	{
	void __iomem *uid = __io_address(U8500_BB_UID_BASE);

	/* Throw these device-specific numbers into the entropy pool */
	add_device_randomness(uid, 0x14);
	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
	readl((u32 *)uid+0),
	readl((u32 )uid+1), readl((u32 )uid+2),
	readl((u32 )uid+3), readl((u32 )uid+4));
	}

	static struct device * __init db8500_soc_device_init(void)
	{
	const char *soc_id = db8500_read_soc_id();

	return ux500_soc_device_init(soc_id);
	}

	/*
	* This function is called from the board init
	*/
	struct device * __init u8500_init_devices(void)
	{
	struct device *parent;
	int i;

	parent = db8500_soc_device_init();

	db8500_add_rtc(parent);
	db8500_add_gpios(parent);
	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);

	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
	platform_devs[i]->dev.parent = parent;

	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));

	return parent;
	}

	#ifdef CONFIG_MACH_UX500_DT

	/* TODO: Once all pieces are DT:ed, remove completely. */
	static struct device * __init u8500_of_init_devices(void)
	{
	struct device *parent = db8500_soc_device_init();

	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);

	u8500_dma40_device.dev.parent = parent;

	/*
	* Devices to be DT:ed:
	* u8500_dma40_device = todo
	* db8500_pmu_device = done
	* db8500_prcmu_device = done
	*/
	platform_device_register(&u8500_dma40_device);

	return parent;
	}

	static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
	/* Requires call-back bindings. */
	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
	/* Requires DMA bindings. */
	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
	/* Requires clock name bindings. */
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
	&db8500_prcmu_pdata),
	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
	/* Requires device name bindings. */
	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
	"pinctrl-db8500", NULL),
	/* Requires clock name and DMA bindings. */
	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
	"ux500-msp-i2s.0", &msp0_platform_data),
	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
	"ux500-msp-i2s.1", &msp1_platform_data),
	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
	"ux500-msp-i2s.2", &msp2_platform_data),
	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
	"ux500-msp-i2s.3", &msp3_platform_data),
	{},
	};

	static const struct of_device_id u8500_local_bus_nodes[] = {
	/* only create devices below soc node */
	{ .compatible = "stericsson,db8500", },
	{ .compatible = "stericsson,db8500-prcmu", },
	{ .compatible = "simple-bus"},
	{ },
	};

	static void __init u8500_init_machine(void)
	{
	struct device *parent = NULL;

	/* Pinmaps must be in place before devices register */
	if (of_machine_is_compatible("st-ericsson,mop500"))
	mop500_pinmaps_init();
	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
	snowball_pinmaps_init();
	mop500_snowball_ethernet_clock_enable();
	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
	hrefv60_pinmaps_init();
	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
	/* TODO: Add pinmaps for ccu9540 board. */

	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
	parent = u8500_of_init_devices();

	/* automatically probe child nodes of db8500 device */
	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
	}

	static const char * stericsson_dt_platform_compat[] = {
	"st-ericsson,u8500",
	"st-ericsson,u8540",
	"st-ericsson,u9500",
	"st-ericsson,u9540",
	NULL,
	};

	DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
	.smp = smp_ops(ux500_smp_ops),
	.map_io = u8500_map_io,
	.init_irq = ux500_init_irq,
	/* we re-use nomadik timer here */
	.init_time = ux500_timer_init,
	.init_machine = u8500_init_machine,
	.init_late = NULL,
	.dt_compat = stericsson_dt_platform_compat,
	MACHINE_END

	#endif