pcmcia: do not use win_req_t when calling pcmcia_request_window()
Instead of win_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem
ranges. After a call to pcmcia_request_window(), the windows found there
are reserved and may be used until pcmcia_release_window() is called.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-mtd@lists.infradead.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88560d0..ab34cb8 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -391,7 +391,6 @@
{
int ret = 0;
int i;
- win_req_t req;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
@@ -420,46 +419,45 @@
goto failed;
/*** Set up 32k window for shared memory (transmit and control) ************/
- req.Attributes =
- WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x8000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &link->win);
+ link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+ link->resource[2]->start = 0;
+ link->resource[2]->end = 0x8000;
+ ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
if (ret)
goto failed;
- ret = pcmcia_map_mem_page(link, link->win, 0);
+ ret = pcmcia_map_mem_page(link, link->resource[2], 0);
if (ret)
goto failed;
- local->sram = ioremap(req.Base, req.Size);
+ local->sram = ioremap(link->resource[2]->start,
+ resource_size(link->resource[2]));
/*** Set up 16k window for shared memory (receive buffer) ***************/
- req.Attributes =
+ link->resource[3]->flags |=
WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x4000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+ link->resource[3]->start = 0;
+ link->resource[3]->end = 0x4000;
+ ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
if (ret)
goto failed;
- ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
+ ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
if (ret)
goto failed;
- local->rmem = ioremap(req.Base, req.Size);
+ local->rmem = ioremap(link->resource[3]->start,
+ resource_size(link->resource[3]));
/*** Set up window for attribute memory ***********************************/
- req.Attributes =
+ link->resource[4]->flags |=
WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x1000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &local->amem_handle);
+ link->resource[4]->start = 0;
+ link->resource[4]->end = 0x1000;
+ ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
if (ret)
goto failed;
- ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
+ ret = pcmcia_map_mem_page(link, link->resource[4], 0);
if (ret)
goto failed;
- local->amem = ioremap(req.Base, req.Size);
+ local->amem = ioremap(link->resource[4]->start,
+ resource_size(link->resource[4]));
dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);