| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2003-2012, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mei.h> |
| |
| #include "mei_dev.h" |
| #include "hbm.h" |
| #include "client.h" |
| |
| static const char *mei_hbm_status_str(enum mei_hbm_status status) |
| { |
| #define MEI_HBM_STATUS(status) case MEI_HBMS_##status: return #status |
| switch (status) { |
| MEI_HBM_STATUS(SUCCESS); |
| MEI_HBM_STATUS(CLIENT_NOT_FOUND); |
| MEI_HBM_STATUS(ALREADY_EXISTS); |
| MEI_HBM_STATUS(REJECTED); |
| MEI_HBM_STATUS(INVALID_PARAMETER); |
| MEI_HBM_STATUS(NOT_ALLOWED); |
| MEI_HBM_STATUS(ALREADY_STARTED); |
| MEI_HBM_STATUS(NOT_STARTED); |
| default: return "unknown"; |
| } |
| #undef MEI_HBM_STATUS |
| }; |
| |
| static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status) |
| { |
| #define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status |
| switch (status) { |
| MEI_CL_CS(SUCCESS); |
| MEI_CL_CS(NOT_FOUND); |
| MEI_CL_CS(ALREADY_STARTED); |
| MEI_CL_CS(OUT_OF_RESOURCES); |
| MEI_CL_CS(MESSAGE_SMALL); |
| MEI_CL_CS(NOT_ALLOWED); |
| default: return "unknown"; |
| } |
| #undef MEI_CL_CCS |
| } |
| |
| const char *mei_hbm_state_str(enum mei_hbm_state state) |
| { |
| #define MEI_HBM_STATE(state) case MEI_HBM_##state: return #state |
| switch (state) { |
| MEI_HBM_STATE(IDLE); |
| MEI_HBM_STATE(STARTING); |
| MEI_HBM_STATE(STARTED); |
| MEI_HBM_STATE(ENUM_CLIENTS); |
| MEI_HBM_STATE(CLIENT_PROPERTIES); |
| MEI_HBM_STATE(STOPPED); |
| default: |
| return "unknown"; |
| } |
| #undef MEI_HBM_STATE |
| } |
| |
| /** |
| * mei_cl_conn_status_to_errno - convert client connect response |
| * status to error code |
| * |
| * @status: client connect response status |
| * |
| * Return: corresponding error code |
| */ |
| static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status) |
| { |
| switch (status) { |
| case MEI_CL_CONN_SUCCESS: return 0; |
| case MEI_CL_CONN_NOT_FOUND: return -ENOTTY; |
| case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY; |
| case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY; |
| case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL; |
| case MEI_CL_CONN_NOT_ALLOWED: return -EBUSY; |
| default: return -EINVAL; |
| } |
| } |
| |
| /** |
| * mei_hbm_idle - set hbm to idle state |
| * |
| * @dev: the device structure |
| */ |
| void mei_hbm_idle(struct mei_device *dev) |
| { |
| dev->init_clients_timer = 0; |
| dev->hbm_state = MEI_HBM_IDLE; |
| } |
| |
| /** |
| * mei_hbm_reset - reset hbm counters and book keeping data structurs |
| * |
| * @dev: the device structure |
| */ |
| void mei_hbm_reset(struct mei_device *dev) |
| { |
| mei_me_cl_rm_all(dev); |
| |
| mei_hbm_idle(dev); |
| } |
| |
| /** |
| * mei_hbm_hdr - construct hbm header |
| * |
| * @hdr: hbm header |
| * @length: payload length |
| */ |
| |
| static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length) |
| { |
| hdr->host_addr = 0; |
| hdr->me_addr = 0; |
| hdr->length = length; |
| hdr->msg_complete = 1; |
| hdr->reserved = 0; |
| hdr->internal = 0; |
| } |
| |
| /** |
| * mei_hbm_cl_hdr - construct client hbm header |
| * |
| * @cl: client |
| * @hbm_cmd: host bus message command |
| * @buf: buffer for cl header |
| * @len: buffer length |
| */ |
| static inline |
| void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len) |
| { |
| struct mei_hbm_cl_cmd *cmd = buf; |
| |
| memset(cmd, 0, len); |
| |
| cmd->hbm_cmd = hbm_cmd; |
| cmd->host_addr = mei_cl_host_addr(cl); |
| cmd->me_addr = mei_cl_me_id(cl); |
| } |
| |
| /** |
| * mei_hbm_cl_write - write simple hbm client message |
| * |
| * @dev: the device structure |
| * @cl: client |
| * @hbm_cmd: host bus message command |
| * @buf: message buffer |
| * @len: buffer length |
| * |
| * Return: 0 on success, <0 on failure. |
| */ |
| static inline |
| int mei_hbm_cl_write(struct mei_device *dev, struct mei_cl *cl, |
| u8 hbm_cmd, u8 *buf, size_t len) |
| { |
| struct mei_msg_hdr mei_hdr; |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| mei_hbm_cl_hdr(cl, hbm_cmd, buf, len); |
| |
| return mei_write_message(dev, &mei_hdr, buf); |
| } |
| |
| /** |
| * mei_hbm_cl_addr_equal - check if the client's and |
| * the message address match |
| * |
| * @cl: client |
| * @cmd: hbm client message |
| * |
| * Return: true if addresses are the same |
| */ |
| static inline |
| bool mei_hbm_cl_addr_equal(struct mei_cl *cl, struct mei_hbm_cl_cmd *cmd) |
| { |
| return mei_cl_host_addr(cl) == cmd->host_addr && |
| mei_cl_me_id(cl) == cmd->me_addr; |
| } |
| |
| /** |
| * mei_hbm_cl_find_by_cmd - find recipient client |
| * |
| * @dev: the device structure |
| * @buf: a buffer with hbm cl command |
| * |
| * Return: the recipient client or NULL if not found |
| */ |
| static inline |
| struct mei_cl *mei_hbm_cl_find_by_cmd(struct mei_device *dev, void *buf) |
| { |
| struct mei_hbm_cl_cmd *cmd = (struct mei_hbm_cl_cmd *)buf; |
| struct mei_cl *cl; |
| |
| list_for_each_entry(cl, &dev->file_list, link) |
| if (mei_hbm_cl_addr_equal(cl, cmd)) |
| return cl; |
| return NULL; |
| } |
| |
| |
| /** |
| * mei_hbm_start_wait - wait for start response message. |
| * |
| * @dev: the device structure |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| int mei_hbm_start_wait(struct mei_device *dev) |
| { |
| int ret; |
| |
| if (dev->hbm_state > MEI_HBM_STARTING) |
| return 0; |
| |
| mutex_unlock(&dev->device_lock); |
| ret = wait_event_timeout(dev->wait_hbm_start, |
| dev->hbm_state != MEI_HBM_STARTING, |
| mei_secs_to_jiffies(MEI_HBM_TIMEOUT)); |
| mutex_lock(&dev->device_lock); |
| |
| if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) { |
| dev->hbm_state = MEI_HBM_IDLE; |
| dev_err(dev->dev, "waiting for mei start failed\n"); |
| return -ETIME; |
| } |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_start_req - sends start request message. |
| * |
| * @dev: the device structure |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| int mei_hbm_start_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_host_version_request start_req; |
| const size_t len = sizeof(struct hbm_host_version_request); |
| int ret; |
| |
| mei_hbm_reset(dev); |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| /* host start message */ |
| memset(&start_req, 0, len); |
| start_req.hbm_cmd = HOST_START_REQ_CMD; |
| start_req.host_version.major_version = HBM_MAJOR_VERSION; |
| start_req.host_version.minor_version = HBM_MINOR_VERSION; |
| |
| dev->hbm_state = MEI_HBM_IDLE; |
| ret = mei_write_message(dev, &mei_hdr, &start_req); |
| if (ret) { |
| dev_err(dev->dev, "version message write failed: ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev->hbm_state = MEI_HBM_STARTING; |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| mei_schedule_stall_timer(dev); |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_enum_clients_req - sends enumeration client request message. |
| * |
| * @dev: the device structure |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| static int mei_hbm_enum_clients_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_host_enum_request enum_req; |
| const size_t len = sizeof(struct hbm_host_enum_request); |
| int ret; |
| |
| /* enumerate clients */ |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| memset(&enum_req, 0, len); |
| enum_req.hbm_cmd = HOST_ENUM_REQ_CMD; |
| enum_req.flags |= dev->hbm_f_dc_supported ? |
| MEI_HBM_ENUM_F_ALLOW_ADD : 0; |
| enum_req.flags |= dev->hbm_f_ie_supported ? |
| MEI_HBM_ENUM_F_IMMEDIATE_ENUM : 0; |
| |
| ret = mei_write_message(dev, &mei_hdr, &enum_req); |
| if (ret) { |
| dev_err(dev->dev, "enumeration request write failed: ret = %d.\n", |
| ret); |
| return ret; |
| } |
| dev->hbm_state = MEI_HBM_ENUM_CLIENTS; |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| mei_schedule_stall_timer(dev); |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_me_cl_add - add new me client to the list |
| * |
| * @dev: the device structure |
| * @res: hbm property response |
| * |
| * Return: 0 on success and -ENOMEM on allocation failure |
| */ |
| |
| static int mei_hbm_me_cl_add(struct mei_device *dev, |
| struct hbm_props_response *res) |
| { |
| struct mei_me_client *me_cl; |
| const uuid_le *uuid = &res->client_properties.protocol_name; |
| |
| mei_me_cl_rm_by_uuid(dev, uuid); |
| |
| me_cl = kzalloc(sizeof(struct mei_me_client), GFP_KERNEL); |
| if (!me_cl) |
| return -ENOMEM; |
| |
| mei_me_cl_init(me_cl); |
| |
| me_cl->props = res->client_properties; |
| me_cl->client_id = res->me_addr; |
| me_cl->tx_flow_ctrl_creds = 0; |
| |
| mei_me_cl_add(dev, me_cl); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_add_cl_resp - send response to fw on client add request |
| * |
| * @dev: the device structure |
| * @addr: me address |
| * @status: response status |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| static int mei_hbm_add_cl_resp(struct mei_device *dev, u8 addr, u8 status) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_add_client_response resp; |
| const size_t len = sizeof(struct hbm_add_client_response); |
| int ret; |
| |
| dev_dbg(dev->dev, "adding client response\n"); |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| memset(&resp, 0, sizeof(struct hbm_add_client_response)); |
| resp.hbm_cmd = MEI_HBM_ADD_CLIENT_RES_CMD; |
| resp.me_addr = addr; |
| resp.status = status; |
| |
| ret = mei_write_message(dev, &mei_hdr, &resp); |
| if (ret) |
| dev_err(dev->dev, "add client response write failed: ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| /** |
| * mei_hbm_fw_add_cl_req - request from the fw to add a client |
| * |
| * @dev: the device structure |
| * @req: add client request |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| static int mei_hbm_fw_add_cl_req(struct mei_device *dev, |
| struct hbm_add_client_request *req) |
| { |
| int ret; |
| u8 status = MEI_HBMS_SUCCESS; |
| |
| BUILD_BUG_ON(sizeof(struct hbm_add_client_request) != |
| sizeof(struct hbm_props_response)); |
| |
| ret = mei_hbm_me_cl_add(dev, (struct hbm_props_response *)req); |
| if (ret) |
| status = !MEI_HBMS_SUCCESS; |
| |
| if (dev->dev_state == MEI_DEV_ENABLED) |
| schedule_work(&dev->bus_rescan_work); |
| |
| return mei_hbm_add_cl_resp(dev, req->me_addr, status); |
| } |
| |
| /** |
| * mei_hbm_cl_notify_req - send notification request |
| * |
| * @dev: the device structure |
| * @cl: a client to disconnect from |
| * @start: true for start false for stop |
| * |
| * Return: 0 on success and -EIO on write failure |
| */ |
| int mei_hbm_cl_notify_req(struct mei_device *dev, |
| struct mei_cl *cl, u8 start) |
| { |
| |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_notification_request req; |
| const size_t len = sizeof(struct hbm_notification_request); |
| int ret; |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, &req, len); |
| |
| req.start = start; |
| |
| ret = mei_write_message(dev, &mei_hdr, &req); |
| if (ret) |
| dev_err(dev->dev, "notify request failed: ret = %d\n", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * notify_res_to_fop - convert notification response to the proper |
| * notification FOP |
| * |
| * @cmd: client notification start response command |
| * |
| * Return: MEI_FOP_NOTIFY_START or MEI_FOP_NOTIFY_STOP; |
| */ |
| static inline enum mei_cb_file_ops notify_res_to_fop(struct mei_hbm_cl_cmd *cmd) |
| { |
| struct hbm_notification_response *rs = |
| (struct hbm_notification_response *)cmd; |
| |
| return mei_cl_notify_req2fop(rs->start); |
| } |
| |
| /** |
| * mei_hbm_cl_notify_start_res - update the client state according |
| * notify start response |
| * |
| * @dev: the device structure |
| * @cl: mei host client |
| * @cmd: client notification start response command |
| */ |
| static void mei_hbm_cl_notify_start_res(struct mei_device *dev, |
| struct mei_cl *cl, |
| struct mei_hbm_cl_cmd *cmd) |
| { |
| struct hbm_notification_response *rs = |
| (struct hbm_notification_response *)cmd; |
| |
| cl_dbg(dev, cl, "hbm: notify start response status=%d\n", rs->status); |
| |
| if (rs->status == MEI_HBMS_SUCCESS || |
| rs->status == MEI_HBMS_ALREADY_STARTED) { |
| cl->notify_en = true; |
| cl->status = 0; |
| } else { |
| cl->status = -EINVAL; |
| } |
| } |
| |
| /** |
| * mei_hbm_cl_notify_stop_res - update the client state according |
| * notify stop response |
| * |
| * @dev: the device structure |
| * @cl: mei host client |
| * @cmd: client notification stop response command |
| */ |
| static void mei_hbm_cl_notify_stop_res(struct mei_device *dev, |
| struct mei_cl *cl, |
| struct mei_hbm_cl_cmd *cmd) |
| { |
| struct hbm_notification_response *rs = |
| (struct hbm_notification_response *)cmd; |
| |
| cl_dbg(dev, cl, "hbm: notify stop response status=%d\n", rs->status); |
| |
| if (rs->status == MEI_HBMS_SUCCESS || |
| rs->status == MEI_HBMS_NOT_STARTED) { |
| cl->notify_en = false; |
| cl->status = 0; |
| } else { |
| /* TODO: spec is not clear yet about other possible issues */ |
| cl->status = -EINVAL; |
| } |
| } |
| |
| /** |
| * mei_hbm_cl_notify - signal notification event |
| * |
| * @dev: the device structure |
| * @cmd: notification client message |
| */ |
| static void mei_hbm_cl_notify(struct mei_device *dev, |
| struct mei_hbm_cl_cmd *cmd) |
| { |
| struct mei_cl *cl; |
| |
| cl = mei_hbm_cl_find_by_cmd(dev, cmd); |
| if (cl) |
| mei_cl_notify(cl); |
| } |
| |
| /** |
| * mei_hbm_prop_req - request property for a single client |
| * |
| * @dev: the device structure |
| * @start_idx: client index to start search |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_props_request prop_req; |
| const size_t len = sizeof(struct hbm_props_request); |
| unsigned long addr; |
| int ret; |
| |
| addr = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, start_idx); |
| |
| /* We got all client properties */ |
| if (addr == MEI_CLIENTS_MAX) { |
| dev->hbm_state = MEI_HBM_STARTED; |
| mei_host_client_init(dev); |
| |
| return 0; |
| } |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| memset(&prop_req, 0, sizeof(struct hbm_props_request)); |
| |
| prop_req.hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD; |
| prop_req.me_addr = addr; |
| |
| ret = mei_write_message(dev, &mei_hdr, &prop_req); |
| if (ret) { |
| dev_err(dev->dev, "properties request write failed: ret = %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; |
| mei_schedule_stall_timer(dev); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_pg - sends pg command |
| * |
| * @dev: the device structure |
| * @pg_cmd: the pg command code |
| * |
| * Return: -EIO on write failure |
| * -EOPNOTSUPP if the operation is not supported by the protocol |
| */ |
| int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_power_gate req; |
| const size_t len = sizeof(struct hbm_power_gate); |
| int ret; |
| |
| if (!dev->hbm_f_pg_supported) |
| return -EOPNOTSUPP; |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| memset(&req, 0, len); |
| req.hbm_cmd = pg_cmd; |
| |
| ret = mei_write_message(dev, &mei_hdr, &req); |
| if (ret) |
| dev_err(dev->dev, "power gate command write failed.\n"); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mei_hbm_pg); |
| |
| /** |
| * mei_hbm_stop_req - send stop request message |
| * |
| * @dev: mei device |
| * |
| * Return: -EIO on write failure |
| */ |
| static int mei_hbm_stop_req(struct mei_device *dev) |
| { |
| struct mei_msg_hdr mei_hdr; |
| struct hbm_host_stop_request req; |
| const size_t len = sizeof(struct hbm_host_stop_request); |
| |
| mei_hbm_hdr(&mei_hdr, len); |
| |
| memset(&req, 0, len); |
| req.hbm_cmd = HOST_STOP_REQ_CMD; |
| req.reason = DRIVER_STOP_REQUEST; |
| |
| return mei_write_message(dev, &mei_hdr, &req); |
| } |
| |
| /** |
| * mei_hbm_cl_flow_control_req - sends flow control request. |
| * |
| * @dev: the device structure |
| * @cl: client info |
| * |
| * Return: -EIO on write failure |
| */ |
| int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| const size_t len = sizeof(struct hbm_flow_control); |
| u8 buf[len]; |
| |
| cl_dbg(dev, cl, "sending flow control\n"); |
| return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD, buf, len); |
| } |
| |
| /** |
| * mei_hbm_add_single_tx_flow_ctrl_creds - adds single buffer credentials. |
| * |
| * @dev: the device structure |
| * @fctrl: flow control response bus message |
| * |
| * Return: 0 on success, < 0 otherwise |
| */ |
| static int mei_hbm_add_single_tx_flow_ctrl_creds(struct mei_device *dev, |
| struct hbm_flow_control *fctrl) |
| { |
| struct mei_me_client *me_cl; |
| int rets; |
| |
| me_cl = mei_me_cl_by_id(dev, fctrl->me_addr); |
| if (!me_cl) { |
| dev_err(dev->dev, "no such me client %d\n", fctrl->me_addr); |
| return -ENOENT; |
| } |
| |
| if (WARN_ON(me_cl->props.single_recv_buf == 0)) { |
| rets = -EINVAL; |
| goto out; |
| } |
| |
| me_cl->tx_flow_ctrl_creds++; |
| dev_dbg(dev->dev, "recv flow ctrl msg ME %d (single) creds = %d.\n", |
| fctrl->me_addr, me_cl->tx_flow_ctrl_creds); |
| |
| rets = 0; |
| out: |
| mei_me_cl_put(me_cl); |
| return rets; |
| } |
| |
| /** |
| * mei_hbm_cl_flow_control_res - flow control response from me |
| * |
| * @dev: the device structure |
| * @fctrl: flow control response bus message |
| */ |
| static void mei_hbm_cl_tx_flow_ctrl_creds_res(struct mei_device *dev, |
| struct hbm_flow_control *fctrl) |
| { |
| struct mei_cl *cl; |
| |
| if (!fctrl->host_addr) { |
| /* single receive buffer */ |
| mei_hbm_add_single_tx_flow_ctrl_creds(dev, fctrl); |
| return; |
| } |
| |
| cl = mei_hbm_cl_find_by_cmd(dev, fctrl); |
| if (cl) { |
| cl->tx_flow_ctrl_creds++; |
| cl_dbg(dev, cl, "flow control creds = %d.\n", |
| cl->tx_flow_ctrl_creds); |
| } |
| } |
| |
| |
| /** |
| * mei_hbm_cl_disconnect_req - sends disconnect message to fw. |
| * |
| * @dev: the device structure |
| * @cl: a client to disconnect from |
| * |
| * Return: -EIO on write failure |
| */ |
| int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| const size_t len = sizeof(struct hbm_client_connect_request); |
| u8 buf[len]; |
| |
| return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD, buf, len); |
| } |
| |
| /** |
| * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW |
| * |
| * @dev: the device structure |
| * @cl: a client to disconnect from |
| * |
| * Return: -EIO on write failure |
| */ |
| int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl) |
| { |
| const size_t len = sizeof(struct hbm_client_connect_response); |
| u8 buf[len]; |
| |
| return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD, buf, len); |
| } |
| |
| /** |
| * mei_hbm_cl_disconnect_res - update the client state according |
| * disconnect response |
| * |
| * @dev: the device structure |
| * @cl: mei host client |
| * @cmd: disconnect client response host bus message |
| */ |
| static void mei_hbm_cl_disconnect_res(struct mei_device *dev, struct mei_cl *cl, |
| struct mei_hbm_cl_cmd *cmd) |
| { |
| struct hbm_client_connect_response *rs = |
| (struct hbm_client_connect_response *)cmd; |
| |
| cl_dbg(dev, cl, "hbm: disconnect response status=%d\n", rs->status); |
| |
| if (rs->status == MEI_CL_DISCONN_SUCCESS) |
| cl->state = MEI_FILE_DISCONNECT_REPLY; |
| cl->status = 0; |
| } |
| |
| /** |
| * mei_hbm_cl_connect_req - send connection request to specific me client |
| * |
| * @dev: the device structure |
| * @cl: a client to connect to |
| * |
| * Return: -EIO on write failure |
| */ |
| int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl) |
| { |
| const size_t len = sizeof(struct hbm_client_connect_request); |
| u8 buf[len]; |
| |
| return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD, buf, len); |
| } |
| |
| /** |
| * mei_hbm_cl_connect_res - update the client state according |
| * connection response |
| * |
| * @dev: the device structure |
| * @cl: mei host client |
| * @cmd: connect client response host bus message |
| */ |
| static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl, |
| struct mei_hbm_cl_cmd *cmd) |
| { |
| struct hbm_client_connect_response *rs = |
| (struct hbm_client_connect_response *)cmd; |
| |
| cl_dbg(dev, cl, "hbm: connect response status=%s\n", |
| mei_cl_conn_status_str(rs->status)); |
| |
| if (rs->status == MEI_CL_CONN_SUCCESS) |
| cl->state = MEI_FILE_CONNECTED; |
| else { |
| cl->state = MEI_FILE_DISCONNECT_REPLY; |
| if (rs->status == MEI_CL_CONN_NOT_FOUND) { |
| mei_me_cl_del(dev, cl->me_cl); |
| if (dev->dev_state == MEI_DEV_ENABLED) |
| schedule_work(&dev->bus_rescan_work); |
| } |
| } |
| cl->status = mei_cl_conn_status_to_errno(rs->status); |
| } |
| |
| /** |
| * mei_hbm_cl_res - process hbm response received on behalf |
| * an client |
| * |
| * @dev: the device structure |
| * @rs: hbm client message |
| * @fop_type: file operation type |
| */ |
| static void mei_hbm_cl_res(struct mei_device *dev, |
| struct mei_hbm_cl_cmd *rs, |
| enum mei_cb_file_ops fop_type) |
| { |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb, *next; |
| |
| cl = NULL; |
| list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) { |
| |
| cl = cb->cl; |
| |
| if (cb->fop_type != fop_type) |
| continue; |
| |
| if (mei_hbm_cl_addr_equal(cl, rs)) { |
| list_del_init(&cb->list); |
| break; |
| } |
| } |
| |
| if (!cl) |
| return; |
| |
| switch (fop_type) { |
| case MEI_FOP_CONNECT: |
| mei_hbm_cl_connect_res(dev, cl, rs); |
| break; |
| case MEI_FOP_DISCONNECT: |
| mei_hbm_cl_disconnect_res(dev, cl, rs); |
| break; |
| case MEI_FOP_NOTIFY_START: |
| mei_hbm_cl_notify_start_res(dev, cl, rs); |
| break; |
| case MEI_FOP_NOTIFY_STOP: |
| mei_hbm_cl_notify_stop_res(dev, cl, rs); |
| break; |
| default: |
| return; |
| } |
| |
| cl->timer_count = 0; |
| wake_up(&cl->wait); |
| } |
| |
| |
| /** |
| * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware |
| * host sends disconnect response |
| * |
| * @dev: the device structure. |
| * @disconnect_req: disconnect request bus message from the me |
| * |
| * Return: -ENOMEM on allocation failure |
| */ |
| static int mei_hbm_fw_disconnect_req(struct mei_device *dev, |
| struct hbm_client_connect_request *disconnect_req) |
| { |
| struct mei_cl *cl; |
| struct mei_cl_cb *cb; |
| |
| cl = mei_hbm_cl_find_by_cmd(dev, disconnect_req); |
| if (cl) { |
| cl_warn(dev, cl, "fw disconnect request received\n"); |
| cl->state = MEI_FILE_DISCONNECTING; |
| cl->timer_count = 0; |
| |
| cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DISCONNECT_RSP, |
| NULL); |
| if (!cb) |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_pg_enter_res - PG enter response received |
| * |
| * @dev: the device structure. |
| * |
| * Return: 0 on success, -EPROTO on state mismatch |
| */ |
| static int mei_hbm_pg_enter_res(struct mei_device *dev) |
| { |
| if (mei_pg_state(dev) != MEI_PG_OFF || |
| dev->pg_event != MEI_PG_EVENT_WAIT) { |
| dev_err(dev->dev, "hbm: pg entry response: state mismatch [%s, %d]\n", |
| mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); |
| return -EPROTO; |
| } |
| |
| dev->pg_event = MEI_PG_EVENT_RECEIVED; |
| wake_up(&dev->wait_pg); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_pg_resume - process with PG resume |
| * |
| * @dev: the device structure. |
| */ |
| void mei_hbm_pg_resume(struct mei_device *dev) |
| { |
| pm_request_resume(dev->dev); |
| } |
| EXPORT_SYMBOL_GPL(mei_hbm_pg_resume); |
| |
| /** |
| * mei_hbm_pg_exit_res - PG exit response received |
| * |
| * @dev: the device structure. |
| * |
| * Return: 0 on success, -EPROTO on state mismatch |
| */ |
| static int mei_hbm_pg_exit_res(struct mei_device *dev) |
| { |
| if (mei_pg_state(dev) != MEI_PG_ON || |
| (dev->pg_event != MEI_PG_EVENT_WAIT && |
| dev->pg_event != MEI_PG_EVENT_IDLE)) { |
| dev_err(dev->dev, "hbm: pg exit response: state mismatch [%s, %d]\n", |
| mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); |
| return -EPROTO; |
| } |
| |
| switch (dev->pg_event) { |
| case MEI_PG_EVENT_WAIT: |
| dev->pg_event = MEI_PG_EVENT_RECEIVED; |
| wake_up(&dev->wait_pg); |
| break; |
| case MEI_PG_EVENT_IDLE: |
| /* |
| * If the driver is not waiting on this then |
| * this is HW initiated exit from PG. |
| * Start runtime pm resume sequence to exit from PG. |
| */ |
| dev->pg_event = MEI_PG_EVENT_RECEIVED; |
| mei_hbm_pg_resume(dev); |
| break; |
| default: |
| WARN(1, "hbm: pg exit response: unexpected pg event = %d\n", |
| dev->pg_event); |
| return -EPROTO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hbm_config_features - check what hbm features and commands |
| * are supported by the fw |
| * |
| * @dev: the device structure |
| */ |
| static void mei_hbm_config_features(struct mei_device *dev) |
| { |
| /* Power Gating Isolation Support */ |
| dev->hbm_f_pg_supported = 0; |
| if (dev->version.major_version > HBM_MAJOR_VERSION_PGI) |
| dev->hbm_f_pg_supported = 1; |
| |
| if (dev->version.major_version == HBM_MAJOR_VERSION_PGI && |
| dev->version.minor_version >= HBM_MINOR_VERSION_PGI) |
| dev->hbm_f_pg_supported = 1; |
| |
| if (dev->version.major_version >= HBM_MAJOR_VERSION_DC) |
| dev->hbm_f_dc_supported = 1; |
| |
| if (dev->version.major_version >= HBM_MAJOR_VERSION_IE) |
| dev->hbm_f_ie_supported = 1; |
| |
| /* disconnect on connect timeout instead of link reset */ |
| if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT) |
| dev->hbm_f_dot_supported = 1; |
| |
| /* Notification Event Support */ |
| if (dev->version.major_version >= HBM_MAJOR_VERSION_EV) |
| dev->hbm_f_ev_supported = 1; |
| |
| /* Fixed Address Client Support */ |
| if (dev->version.major_version >= HBM_MAJOR_VERSION_FA) |
| dev->hbm_f_fa_supported = 1; |
| } |
| |
| /** |
| * mei_hbm_version_is_supported - checks whether the driver can |
| * support the hbm version of the device |
| * |
| * @dev: the device structure |
| * Return: true if driver can support hbm version of the device |
| */ |
| bool mei_hbm_version_is_supported(struct mei_device *dev) |
| { |
| return (dev->version.major_version < HBM_MAJOR_VERSION) || |
| (dev->version.major_version == HBM_MAJOR_VERSION && |
| dev->version.minor_version <= HBM_MINOR_VERSION); |
| } |
| |
| /** |
| * mei_hbm_dispatch - bottom half read routine after ISR to |
| * handle the read bus message cmd processing. |
| * |
| * @dev: the device structure |
| * @hdr: header of bus message |
| * |
| * Return: 0 on success and < 0 on failure |
| */ |
| int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) |
| { |
| struct mei_bus_message *mei_msg; |
| struct hbm_host_version_response *version_res; |
| struct hbm_props_response *props_res; |
| struct hbm_host_enum_response *enum_res; |
| struct hbm_add_client_request *add_cl_req; |
| int ret; |
| |
| struct mei_hbm_cl_cmd *cl_cmd; |
| struct hbm_client_connect_request *disconnect_req; |
| struct hbm_flow_control *fctrl; |
| |
| /* read the message to our buffer */ |
| BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf)); |
| mei_read_slots(dev, dev->rd_msg_buf, hdr->length); |
| mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; |
| cl_cmd = (struct mei_hbm_cl_cmd *)mei_msg; |
| |
| /* ignore spurious message and prevent reset nesting |
| * hbm is put to idle during system reset |
| */ |
| if (dev->hbm_state == MEI_HBM_IDLE) { |
| dev_dbg(dev->dev, "hbm: state is idle ignore spurious messages\n"); |
| return 0; |
| } |
| |
| switch (mei_msg->hbm_cmd) { |
| case HOST_START_RES_CMD: |
| dev_dbg(dev->dev, "hbm: start: response message received.\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| version_res = (struct hbm_host_version_response *)mei_msg; |
| |
| dev_dbg(dev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n", |
| HBM_MAJOR_VERSION, HBM_MINOR_VERSION, |
| version_res->me_max_version.major_version, |
| version_res->me_max_version.minor_version); |
| |
| if (version_res->host_version_supported) { |
| dev->version.major_version = HBM_MAJOR_VERSION; |
| dev->version.minor_version = HBM_MINOR_VERSION; |
| } else { |
| dev->version.major_version = |
| version_res->me_max_version.major_version; |
| dev->version.minor_version = |
| version_res->me_max_version.minor_version; |
| } |
| |
| if (!mei_hbm_version_is_supported(dev)) { |
| dev_warn(dev->dev, "hbm: start: version mismatch - stopping the driver.\n"); |
| |
| dev->hbm_state = MEI_HBM_STOPPED; |
| if (mei_hbm_stop_req(dev)) { |
| dev_err(dev->dev, "hbm: start: failed to send stop request\n"); |
| return -EIO; |
| } |
| break; |
| } |
| |
| mei_hbm_config_features(dev); |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_STARTING) { |
| dev_err(dev->dev, "hbm: start: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| if (mei_hbm_enum_clients_req(dev)) { |
| dev_err(dev->dev, "hbm: start: failed to send enumeration request\n"); |
| return -EIO; |
| } |
| |
| wake_up(&dev->wait_hbm_start); |
| break; |
| |
| case CLIENT_CONNECT_RES_CMD: |
| dev_dbg(dev->dev, "hbm: client connect response: message received.\n"); |
| mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_CONNECT); |
| break; |
| |
| case CLIENT_DISCONNECT_RES_CMD: |
| dev_dbg(dev->dev, "hbm: client disconnect response: message received.\n"); |
| mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_DISCONNECT); |
| break; |
| |
| case MEI_FLOW_CONTROL_CMD: |
| dev_dbg(dev->dev, "hbm: client flow control response: message received.\n"); |
| |
| fctrl = (struct hbm_flow_control *)mei_msg; |
| mei_hbm_cl_tx_flow_ctrl_creds_res(dev, fctrl); |
| break; |
| |
| case MEI_PG_ISOLATION_ENTRY_RES_CMD: |
| dev_dbg(dev->dev, "hbm: power gate isolation entry response received\n"); |
| ret = mei_hbm_pg_enter_res(dev); |
| if (ret) |
| return ret; |
| break; |
| |
| case MEI_PG_ISOLATION_EXIT_REQ_CMD: |
| dev_dbg(dev->dev, "hbm: power gate isolation exit request received\n"); |
| ret = mei_hbm_pg_exit_res(dev); |
| if (ret) |
| return ret; |
| break; |
| |
| case HOST_CLIENT_PROPERTIES_RES_CMD: |
| dev_dbg(dev->dev, "hbm: properties response: message received.\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) { |
| dev_err(dev->dev, "hbm: properties response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| props_res = (struct hbm_props_response *)mei_msg; |
| |
| if (props_res->status == MEI_HBMS_CLIENT_NOT_FOUND) { |
| dev_dbg(dev->dev, "hbm: properties response: %d CLIENT_NOT_FOUND\n", |
| props_res->me_addr); |
| } else if (props_res->status) { |
| dev_err(dev->dev, "hbm: properties response: wrong status = %d %s\n", |
| props_res->status, |
| mei_hbm_status_str(props_res->status)); |
| return -EPROTO; |
| } else { |
| mei_hbm_me_cl_add(dev, props_res); |
| } |
| |
| /* request property for the next client */ |
| if (mei_hbm_prop_req(dev, props_res->me_addr + 1)) |
| return -EIO; |
| |
| break; |
| |
| case HOST_ENUM_RES_CMD: |
| dev_dbg(dev->dev, "hbm: enumeration response: message received\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| enum_res = (struct hbm_host_enum_response *) mei_msg; |
| BUILD_BUG_ON(sizeof(dev->me_clients_map) |
| < sizeof(enum_res->valid_addresses)); |
| memcpy(dev->me_clients_map, enum_res->valid_addresses, |
| sizeof(enum_res->valid_addresses)); |
| |
| if (dev->dev_state != MEI_DEV_INIT_CLIENTS || |
| dev->hbm_state != MEI_HBM_ENUM_CLIENTS) { |
| dev_err(dev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES; |
| |
| /* first property request */ |
| if (mei_hbm_prop_req(dev, 0)) |
| return -EIO; |
| |
| break; |
| |
| case HOST_STOP_RES_CMD: |
| dev_dbg(dev->dev, "hbm: stop response: message received\n"); |
| |
| dev->init_clients_timer = 0; |
| |
| if (dev->hbm_state != MEI_HBM_STOPPED) { |
| dev_err(dev->dev, "hbm: stop response: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| |
| dev->dev_state = MEI_DEV_POWER_DOWN; |
| dev_info(dev->dev, "hbm: stop response: resetting.\n"); |
| /* force the reset */ |
| return -EPROTO; |
| break; |
| |
| case CLIENT_DISCONNECT_REQ_CMD: |
| dev_dbg(dev->dev, "hbm: disconnect request: message received\n"); |
| |
| disconnect_req = (struct hbm_client_connect_request *)mei_msg; |
| mei_hbm_fw_disconnect_req(dev, disconnect_req); |
| break; |
| |
| case ME_STOP_REQ_CMD: |
| dev_dbg(dev->dev, "hbm: stop request: message received\n"); |
| dev->hbm_state = MEI_HBM_STOPPED; |
| if (mei_hbm_stop_req(dev)) { |
| dev_err(dev->dev, "hbm: stop request: failed to send stop request\n"); |
| return -EIO; |
| } |
| break; |
| |
| case MEI_HBM_ADD_CLIENT_REQ_CMD: |
| dev_dbg(dev->dev, "hbm: add client request received\n"); |
| /* |
| * after the host receives the enum_resp |
| * message clients may be added or removed |
| */ |
| if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS || |
| dev->hbm_state >= MEI_HBM_STOPPED) { |
| dev_err(dev->dev, "hbm: add client: state mismatch, [%d, %d]\n", |
| dev->dev_state, dev->hbm_state); |
| return -EPROTO; |
| } |
| add_cl_req = (struct hbm_add_client_request *)mei_msg; |
| ret = mei_hbm_fw_add_cl_req(dev, add_cl_req); |
| if (ret) { |
| dev_err(dev->dev, "hbm: add client: failed to send response %d\n", |
| ret); |
| return -EIO; |
| } |
| dev_dbg(dev->dev, "hbm: add client request processed\n"); |
| break; |
| |
| case MEI_HBM_NOTIFY_RES_CMD: |
| dev_dbg(dev->dev, "hbm: notify response received\n"); |
| mei_hbm_cl_res(dev, cl_cmd, notify_res_to_fop(cl_cmd)); |
| break; |
| |
| case MEI_HBM_NOTIFICATION_CMD: |
| dev_dbg(dev->dev, "hbm: notification\n"); |
| mei_hbm_cl_notify(dev, cl_cmd); |
| break; |
| |
| default: |
| BUG(); |
| break; |
| |
| } |
| return 0; |
| } |
| |