qlge: Add support for device ID 8000.
This device has more firmware support for link management, setting
TX and RX maximum frame sizes.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index b4c6fd7..29334d9 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -76,6 +76,7 @@
static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
+ {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
/* required last entry */
{0,}
};
@@ -669,6 +670,57 @@
return status;
}
+static int ql_get_8000_flash_params(struct ql_adapter *qdev)
+{
+ u32 i, size;
+ int status;
+ __le32 *p = (__le32 *)&qdev->flash;
+ u32 offset;
+
+ /* Get flash offset for function and adjust
+ * for dword access.
+ */
+ if (!qdev->func)
+ offset = FUNC0_FLASH_OFFSET / sizeof(u32);
+ else
+ offset = FUNC1_FLASH_OFFSET / sizeof(u32);
+
+ if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
+ return -ETIMEDOUT;
+
+ size = sizeof(struct flash_params_8000) / sizeof(u32);
+ for (i = 0; i < size; i++, p++) {
+ status = ql_read_flash_word(qdev, i+offset, p);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
+ goto exit;
+ }
+ }
+
+ status = ql_validate_flash(qdev,
+ sizeof(struct flash_params_8000) / sizeof(u16),
+ "8000");
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
+ status = -EINVAL;
+ goto exit;
+ }
+
+ if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
+ QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
+ status = -EINVAL;
+ goto exit;
+ }
+
+ memcpy(qdev->ndev->dev_addr,
+ qdev->flash.flash_params_8000.mac_addr,
+ qdev->ndev->addr_len);
+
+exit:
+ ql_sem_unlock(qdev, SEM_FLASH_MASK);
+ return status;
+}
+
static int ql_get_8012_flash_params(struct ql_adapter *qdev)
{
int i;
@@ -783,6 +835,11 @@
return status;
}
+static int ql_8000_port_initialize(struct ql_adapter *qdev)
+{
+ return ql_mb_get_fw_state(qdev);
+}
+
/* Take the MAC Core out of reset.
* Enable statistics counting.
* Take the transmitter/receiver out of reset.
@@ -3557,6 +3614,11 @@
.port_initialize = ql_8012_port_initialize,
};
+static struct nic_operations qla8000_nic_ops = {
+ .get_flash = ql_get_8000_flash_params,
+ .port_initialize = ql_8000_port_initialize,
+};
+
static void ql_get_board_info(struct ql_adapter *qdev)
{
@@ -3579,6 +3641,8 @@
qdev->device_id = qdev->pdev->device;
if (qdev->device_id == QLGE_DEVICE_ID_8012)
qdev->nic_ops = &qla8012_nic_ops;
+ else if (qdev->device_id == QLGE_DEVICE_ID_8000)
+ qdev->nic_ops = &qla8000_nic_ops;
}
static void ql_release_all(struct pci_dev *pdev)