| /* |
| * Management Module Support for MPT (Message Passing Technology) based |
| * controllers |
| * |
| * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c |
| * Copyright (C) 2007-2012 LSI Corporation |
| * (mailto:DL-MPTFusionLinux@lsi.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, |
| * USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| #include <linux/compat.h> |
| #include <linux/poll.h> |
| |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| #include "mpt2sas_base.h" |
| #include "mpt2sas_ctl.h" |
| |
| static DEFINE_MUTEX(_ctl_mutex); |
| static struct fasync_struct *async_queue; |
| static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); |
| |
| static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, |
| u8 *issue_reset); |
| |
| /** |
| * enum block_state - blocking state |
| * @NON_BLOCKING: non blocking |
| * @BLOCKING: blocking |
| * |
| * These states are for ioctls that need to wait for a response |
| * from firmware, so they probably require sleep. |
| */ |
| enum block_state { |
| NON_BLOCKING, |
| BLOCKING, |
| }; |
| |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| /** |
| * _ctl_sas_device_find_by_handle - sas device search |
| * @ioc: per adapter object |
| * @handle: sas device handle (assigned by firmware) |
| * Context: Calling function should acquire ioc->sas_device_lock |
| * |
| * This searches for sas_device based on sas_address, then return sas_device |
| * object. |
| */ |
| static struct _sas_device * |
| _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) |
| { |
| struct _sas_device *sas_device, *r; |
| |
| r = NULL; |
| list_for_each_entry(sas_device, &ioc->sas_device_list, list) { |
| if (sas_device->handle != handle) |
| continue; |
| r = sas_device; |
| goto out; |
| } |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * _ctl_display_some_debug - debug routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @calling_function_name: string pass from calling function |
| * @mpi_reply: reply message frame |
| * Context: none. |
| * |
| * Function for displaying debug info helpful when debugging issues |
| * in this module. |
| */ |
| static void |
| _ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, |
| char *calling_function_name, MPI2DefaultReply_t *mpi_reply) |
| { |
| Mpi2ConfigRequest_t *mpi_request; |
| char *desc = NULL; |
| |
| if (!(ioc->logging_level & MPT_DEBUG_IOCTL)) |
| return; |
| |
| mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| switch (mpi_request->Function) { |
| case MPI2_FUNCTION_SCSI_IO_REQUEST: |
| { |
| Mpi2SCSIIORequest_t *scsi_request = |
| (Mpi2SCSIIORequest_t *)mpi_request; |
| |
| snprintf(ioc->tmp_string, MPT_STRING_LENGTH, |
| "scsi_io, cmd(0x%02x), cdb_len(%d)", |
| scsi_request->CDB.CDB32[0], |
| le16_to_cpu(scsi_request->IoFlags) & 0xF); |
| desc = ioc->tmp_string; |
| break; |
| } |
| case MPI2_FUNCTION_SCSI_TASK_MGMT: |
| desc = "task_mgmt"; |
| break; |
| case MPI2_FUNCTION_IOC_INIT: |
| desc = "ioc_init"; |
| break; |
| case MPI2_FUNCTION_IOC_FACTS: |
| desc = "ioc_facts"; |
| break; |
| case MPI2_FUNCTION_CONFIG: |
| { |
| Mpi2ConfigRequest_t *config_request = |
| (Mpi2ConfigRequest_t *)mpi_request; |
| |
| snprintf(ioc->tmp_string, MPT_STRING_LENGTH, |
| "config, type(0x%02x), ext_type(0x%02x), number(%d)", |
| (config_request->Header.PageType & |
| MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType, |
| config_request->Header.PageNumber); |
| desc = ioc->tmp_string; |
| break; |
| } |
| case MPI2_FUNCTION_PORT_FACTS: |
| desc = "port_facts"; |
| break; |
| case MPI2_FUNCTION_PORT_ENABLE: |
| desc = "port_enable"; |
| break; |
| case MPI2_FUNCTION_EVENT_NOTIFICATION: |
| desc = "event_notification"; |
| break; |
| case MPI2_FUNCTION_FW_DOWNLOAD: |
| desc = "fw_download"; |
| break; |
| case MPI2_FUNCTION_FW_UPLOAD: |
| desc = "fw_upload"; |
| break; |
| case MPI2_FUNCTION_RAID_ACTION: |
| desc = "raid_action"; |
| break; |
| case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: |
| { |
| Mpi2SCSIIORequest_t *scsi_request = |
| (Mpi2SCSIIORequest_t *)mpi_request; |
| |
| snprintf(ioc->tmp_string, MPT_STRING_LENGTH, |
| "raid_pass, cmd(0x%02x), cdb_len(%d)", |
| scsi_request->CDB.CDB32[0], |
| le16_to_cpu(scsi_request->IoFlags) & 0xF); |
| desc = ioc->tmp_string; |
| break; |
| } |
| case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: |
| desc = "sas_iounit_cntl"; |
| break; |
| case MPI2_FUNCTION_SATA_PASSTHROUGH: |
| desc = "sata_pass"; |
| break; |
| case MPI2_FUNCTION_DIAG_BUFFER_POST: |
| desc = "diag_buffer_post"; |
| break; |
| case MPI2_FUNCTION_DIAG_RELEASE: |
| desc = "diag_release"; |
| break; |
| case MPI2_FUNCTION_SMP_PASSTHROUGH: |
| desc = "smp_passthrough"; |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| printk(MPT2SAS_INFO_FMT "%s: %s, smid(%d)\n", |
| ioc->name, calling_function_name, desc, smid); |
| |
| if (!mpi_reply) |
| return; |
| |
| if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) |
| printk(MPT2SAS_INFO_FMT |
| "\tiocstatus(0x%04x), loginfo(0x%08x)\n", |
| ioc->name, le16_to_cpu(mpi_reply->IOCStatus), |
| le32_to_cpu(mpi_reply->IOCLogInfo)); |
| |
| if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| mpi_request->Function == |
| MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { |
| Mpi2SCSIIOReply_t *scsi_reply = |
| (Mpi2SCSIIOReply_t *)mpi_reply; |
| struct _sas_device *sas_device = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioc->sas_device_lock, flags); |
| sas_device = _ctl_sas_device_find_by_handle(ioc, |
| le16_to_cpu(scsi_reply->DevHandle)); |
| if (sas_device) { |
| printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), " |
| "phy(%d)\n", ioc->name, (unsigned long long) |
| sas_device->sas_address, sas_device->phy); |
| printk(MPT2SAS_WARN_FMT |
| "\tenclosure_logical_id(0x%016llx), slot(%d)\n", |
| ioc->name, sas_device->enclosure_logical_id, |
| sas_device->slot); |
| } |
| spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
| if (scsi_reply->SCSIState || scsi_reply->SCSIStatus) |
| printk(MPT2SAS_INFO_FMT |
| "\tscsi_state(0x%02x), scsi_status" |
| "(0x%02x)\n", ioc->name, |
| scsi_reply->SCSIState, |
| scsi_reply->SCSIStatus); |
| } |
| } |
| #endif |
| |
| /** |
| * mpt2sas_ctl_done - ctl module completion routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * Context: none. |
| * |
| * The callback handler when using ioc->ctl_cb_idx. |
| * |
| * Return 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| Mpi2SCSIIOReply_t *scsiio_reply; |
| const void *sense_data; |
| u32 sz; |
| |
| if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED) |
| return 1; |
| if (ioc->ctl_cmds.smid != smid) |
| return 1; |
| ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE; |
| mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); |
| if (mpi_reply) { |
| memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); |
| ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID; |
| /* get sense data */ |
| if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| mpi_reply->Function == |
| MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { |
| scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply; |
| if (scsiio_reply->SCSIState & |
| MPI2_SCSI_STATE_AUTOSENSE_VALID) { |
| sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, |
| le32_to_cpu(scsiio_reply->SenseCount)); |
| sense_data = mpt2sas_base_get_sense_buffer(ioc, |
| smid); |
| memcpy(ioc->ctl_cmds.sense, sense_data, sz); |
| } |
| } |
| } |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply); |
| #endif |
| ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING; |
| complete(&ioc->ctl_cmds.done); |
| return 1; |
| } |
| |
| /** |
| * _ctl_check_event_type - determines when an event needs logging |
| * @ioc: per adapter object |
| * @event: firmware event |
| * |
| * The bitmask in ioc->event_type[] indicates which events should be |
| * be saved in the driver event_log. This bitmask is set by application. |
| * |
| * Returns 1 when event should be captured, or zero means no match. |
| */ |
| static int |
| _ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event) |
| { |
| u16 i; |
| u32 desired_event; |
| |
| if (event >= 128 || !event || !ioc->event_log) |
| return 0; |
| |
| desired_event = (1 << (event % 32)); |
| if (!desired_event) |
| desired_event = 1; |
| i = event / 32; |
| return desired_event & ioc->event_type[i]; |
| } |
| |
| /** |
| * mpt2sas_ctl_add_to_event_log - add event |
| * @ioc: per adapter object |
| * @mpi_reply: reply message frame |
| * |
| * Return nothing. |
| */ |
| void |
| mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2EventNotificationReply_t *mpi_reply) |
| { |
| struct MPT2_IOCTL_EVENTS *event_log; |
| u16 event; |
| int i; |
| u32 sz, event_data_sz; |
| u8 send_aen = 0; |
| |
| if (!ioc->event_log) |
| return; |
| |
| event = le16_to_cpu(mpi_reply->Event); |
| |
| if (_ctl_check_event_type(ioc, event)) { |
| |
| /* insert entry into circular event_log */ |
| i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE; |
| event_log = ioc->event_log; |
| event_log[i].event = event; |
| event_log[i].context = ioc->event_context++; |
| |
| event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4; |
| sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE); |
| memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE); |
| memcpy(event_log[i].data, mpi_reply->EventData, sz); |
| send_aen = 1; |
| } |
| |
| /* This aen_event_read_flag flag is set until the |
| * application has read the event log. |
| * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify. |
| */ |
| if (event == MPI2_EVENT_LOG_ENTRY_ADDED || |
| (send_aen && !ioc->aen_event_read_flag)) { |
| ioc->aen_event_read_flag = 1; |
| wake_up_interruptible(&ctl_poll_wait); |
| if (async_queue) |
| kill_fasync(&async_queue, SIGIO, POLL_IN); |
| } |
| } |
| |
| /** |
| * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time) |
| * @ioc: per adapter object |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * Context: interrupt. |
| * |
| * This function merely adds a new work task into ioc->firmware_event_thread. |
| * The tasks are worked from _firmware_event_work in user context. |
| * |
| * Return 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, |
| u32 reply) |
| { |
| Mpi2EventNotificationReply_t *mpi_reply; |
| |
| mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); |
| mpt2sas_ctl_add_to_event_log(ioc, mpi_reply); |
| return 1; |
| } |
| |
| /** |
| * _ctl_verify_adapter - validates ioc_number passed from application |
| * @ioc: per adapter object |
| * @iocpp: The ioc pointer is returned in this. |
| * |
| * Return (-1) means error, else ioc_number. |
| */ |
| static int |
| _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) |
| { |
| struct MPT2SAS_ADAPTER *ioc; |
| |
| list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { |
| if (ioc->id != ioc_number) |
| continue; |
| *iocpp = ioc; |
| return ioc_number; |
| } |
| *iocpp = NULL; |
| return -1; |
| } |
| |
| /** |
| * mpt2sas_ctl_reset_handler - reset callback handler (for ctl) |
| * @ioc: per adapter object |
| * @reset_phase: phase |
| * |
| * The handler for doing any required cleanup or initialization. |
| * |
| * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, |
| * MPT2_IOC_DONE_RESET |
| */ |
| void |
| mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) |
| { |
| int i; |
| u8 issue_reset; |
| |
| switch (reset_phase) { |
| case MPT2_IOC_PRE_RESET: |
| dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); |
| for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { |
| if (!(ioc->diag_buffer_status[i] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED)) |
| continue; |
| if ((ioc->diag_buffer_status[i] & |
| MPT2_DIAG_BUFFER_IS_RELEASED)) |
| continue; |
| _ctl_send_release(ioc, i, &issue_reset); |
| } |
| break; |
| case MPT2_IOC_AFTER_RESET: |
| dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); |
| if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) { |
| ioc->ctl_cmds.status |= MPT2_CMD_RESET; |
| mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid); |
| complete(&ioc->ctl_cmds.done); |
| } |
| break; |
| case MPT2_IOC_DONE_RESET: |
| dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); |
| |
| for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { |
| if (!(ioc->diag_buffer_status[i] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED)) |
| continue; |
| if ((ioc->diag_buffer_status[i] & |
| MPT2_DIAG_BUFFER_IS_RELEASED)) |
| continue; |
| ioc->diag_buffer_status[i] |= |
| MPT2_DIAG_BUFFER_IS_DIAG_RESET; |
| } |
| break; |
| } |
| } |
| |
| /** |
| * _ctl_fasync - |
| * @fd - |
| * @filep - |
| * @mode - |
| * |
| * Called when application request fasyn callback handler. |
| */ |
| static int |
| _ctl_fasync(int fd, struct file *filep, int mode) |
| { |
| return fasync_helper(fd, filep, mode, &async_queue); |
| } |
| |
| /** |
| * _ctl_release - |
| * @inode - |
| * @filep - |
| * |
| * Called when application releases the fasyn callback handler. |
| */ |
| static int |
| _ctl_release(struct inode *inode, struct file *filep) |
| { |
| return fasync_helper(-1, filep, 0, &async_queue); |
| } |
| |
| /** |
| * _ctl_poll - |
| * @file - |
| * @wait - |
| * |
| */ |
| static unsigned int |
| _ctl_poll(struct file *filep, poll_table *wait) |
| { |
| struct MPT2SAS_ADAPTER *ioc; |
| |
| poll_wait(filep, &ctl_poll_wait, wait); |
| |
| list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { |
| if (ioc->aen_event_read_flag) |
| return POLLIN | POLLRDNORM; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_set_task_mid - assign an active smid to tm request |
| * @ioc: per adapter object |
| * @karg - (struct mpt2_ioctl_command) |
| * @tm_request - pointer to mf from user space |
| * |
| * Returns 0 when an smid if found, else fail. |
| * during failure, the reply frame is filled. |
| */ |
| static int |
| _ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg, |
| Mpi2SCSITaskManagementRequest_t *tm_request) |
| { |
| u8 found = 0; |
| u16 i; |
| u16 handle; |
| struct scsi_cmnd *scmd; |
| struct MPT2SAS_DEVICE *priv_data; |
| unsigned long flags; |
| Mpi2SCSITaskManagementReply_t *tm_reply; |
| u32 sz; |
| u32 lun; |
| char *desc = NULL; |
| |
| if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) |
| desc = "abort_task"; |
| else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) |
| desc = "query_task"; |
| else |
| return 0; |
| |
| lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN); |
| |
| handle = le16_to_cpu(tm_request->DevHandle); |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| for (i = ioc->scsiio_depth; i && !found; i--) { |
| scmd = ioc->scsi_lookup[i - 1].scmd; |
| if (scmd == NULL || scmd->device == NULL || |
| scmd->device->hostdata == NULL) |
| continue; |
| if (lun != scmd->device->lun) |
| continue; |
| priv_data = scmd->device->hostdata; |
| if (priv_data->sas_target == NULL) |
| continue; |
| if (priv_data->sas_target->handle != handle) |
| continue; |
| tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid); |
| found = 1; |
| } |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| |
| if (!found) { |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name, |
| desc, le16_to_cpu(tm_request->DevHandle), lun)); |
| tm_reply = ioc->ctl_cmds.reply; |
| tm_reply->DevHandle = tm_request->DevHandle; |
| tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; |
| tm_reply->TaskType = tm_request->TaskType; |
| tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4; |
| tm_reply->VP_ID = tm_request->VP_ID; |
| tm_reply->VF_ID = tm_request->VF_ID; |
| sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz); |
| if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply, |
| sz)) |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| return 1; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name, |
| desc, le16_to_cpu(tm_request->DevHandle), lun, |
| le16_to_cpu(tm_request->TaskMID))); |
| return 0; |
| } |
| |
| /** |
| * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode |
| * @ioc: per adapter object |
| * @karg - (struct mpt2_ioctl_command) |
| * @mf - pointer to mf in user space |
| */ |
| static long |
| _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command karg, |
| void __user *mf) |
| { |
| MPI2RequestHeader_t *mpi_request = NULL, *request; |
| MPI2DefaultReply_t *mpi_reply; |
| u32 ioc_state; |
| u16 ioc_status; |
| u16 smid; |
| unsigned long timeout, timeleft; |
| u8 issue_reset; |
| u32 sz; |
| void *psge; |
| void *data_out = NULL; |
| dma_addr_t data_out_dma; |
| size_t data_out_sz = 0; |
| void *data_in = NULL; |
| dma_addr_t data_in_dma; |
| size_t data_in_sz = 0; |
| u32 sgl_flags; |
| long ret; |
| u16 wait_state_count; |
| |
| issue_reset = 0; |
| |
| if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { |
| printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", |
| ioc->name, __func__); |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| wait_state_count = 0; |
| ioc_state = mpt2sas_base_get_iocstate(ioc, 1); |
| while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { |
| if (wait_state_count++ == 10) { |
| printk(MPT2SAS_ERR_FMT |
| "%s: failed due to ioc not operational\n", |
| ioc->name, __func__); |
| ret = -EFAULT; |
| goto out; |
| } |
| ssleep(1); |
| ioc_state = mpt2sas_base_get_iocstate(ioc, 1); |
| printk(MPT2SAS_INFO_FMT "%s: waiting for " |
| "operational state(count=%d)\n", ioc->name, |
| __func__, wait_state_count); |
| } |
| if (wait_state_count) |
| printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", |
| ioc->name, __func__); |
| |
| mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL); |
| if (!mpi_request) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a memory for " |
| "mpi_request\n", ioc->name, __func__); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Check for overflow and wraparound */ |
| if (karg.data_sge_offset * 4 > ioc->request_sz || |
| karg.data_sge_offset > (UINT_MAX / 4)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* copy in request message frame from user */ |
| if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, |
| __func__); |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { |
| smid = mpt2sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| ret = -EAGAIN; |
| goto out; |
| } |
| } else { |
| |
| smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| ret = -EAGAIN; |
| goto out; |
| } |
| } |
| |
| ret = 0; |
| ioc->ctl_cmds.status = MPT2_CMD_PENDING; |
| memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); |
| request = mpt2sas_base_get_msg_frame(ioc, smid); |
| memcpy(request, mpi_request, karg.data_sge_offset*4); |
| ioc->ctl_cmds.smid = smid; |
| data_out_sz = karg.data_out_size; |
| data_in_sz = karg.data_in_size; |
| |
| if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { |
| if (!le16_to_cpu(mpi_request->FunctionDependent1) || |
| le16_to_cpu(mpi_request->FunctionDependent1) > |
| ioc->facts.MaxDevHandle) { |
| ret = -EINVAL; |
| mpt2sas_base_free_smid(ioc, smid); |
| goto out; |
| } |
| } |
| |
| /* obtain dma-able memory for data transfer */ |
| if (data_out_sz) /* WRITE */ { |
| data_out = pci_alloc_consistent(ioc->pdev, data_out_sz, |
| &data_out_dma); |
| if (!data_out) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -ENOMEM; |
| mpt2sas_base_free_smid(ioc, smid); |
| goto out; |
| } |
| if (copy_from_user(data_out, karg.data_out_buf_ptr, |
| data_out_sz)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -EFAULT; |
| mpt2sas_base_free_smid(ioc, smid); |
| goto out; |
| } |
| } |
| |
| if (data_in_sz) /* READ */ { |
| data_in = pci_alloc_consistent(ioc->pdev, data_in_sz, |
| &data_in_dma); |
| if (!data_in) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -ENOMEM; |
| mpt2sas_base_free_smid(ioc, smid); |
| goto out; |
| } |
| } |
| |
| /* add scatter gather elements */ |
| psge = (void *)request + (karg.data_sge_offset*4); |
| |
| if (!data_out_sz && !data_in_sz) { |
| mpt2sas_base_build_zero_len_sge(ioc, psge); |
| } else if (data_out_sz && data_in_sz) { |
| /* WRITE sgel first */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| |
| /* incr sgel */ |
| psge += ioc->sge_size; |
| |
| /* READ sgel last */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } else if (data_out_sz) /* WRITE */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| } else if (data_in_sz) /* READ */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } |
| |
| /* send command to firmware */ |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| _ctl_display_some_debug(ioc, smid, "ctl_request", NULL); |
| #endif |
| |
| init_completion(&ioc->ctl_cmds.done); |
| switch (mpi_request->Function) { |
| case MPI2_FUNCTION_SCSI_IO_REQUEST: |
| case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: |
| { |
| Mpi2SCSIIORequest_t *scsiio_request = |
| (Mpi2SCSIIORequest_t *)request; |
| scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; |
| scsiio_request->SenseBufferLowAddress = |
| mpt2sas_base_get_sense_buffer_dma(ioc, smid); |
| memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE); |
| if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) |
| mpt2sas_base_put_smid_scsi_io(ioc, smid, |
| le16_to_cpu(mpi_request->FunctionDependent1)); |
| else |
| mpt2sas_base_put_smid_default(ioc, smid); |
| break; |
| } |
| case MPI2_FUNCTION_SCSI_TASK_MGMT: |
| { |
| Mpi2SCSITaskManagementRequest_t *tm_request = |
| (Mpi2SCSITaskManagementRequest_t *)request; |
| |
| dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "TASK_MGMT: " |
| "handle(0x%04x), task_type(0x%02x)\n", ioc->name, |
| le16_to_cpu(tm_request->DevHandle), tm_request->TaskType)); |
| |
| if (tm_request->TaskType == |
| MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK || |
| tm_request->TaskType == |
| MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) { |
| if (_ctl_set_task_mid(ioc, &karg, tm_request)) { |
| mpt2sas_base_free_smid(ioc, smid); |
| goto out; |
| } |
| } |
| |
| mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu( |
| tm_request->DevHandle)); |
| mpt2sas_base_put_smid_hi_priority(ioc, smid); |
| break; |
| } |
| case MPI2_FUNCTION_SMP_PASSTHROUGH: |
| { |
| Mpi2SmpPassthroughRequest_t *smp_request = |
| (Mpi2SmpPassthroughRequest_t *)mpi_request; |
| u8 *data; |
| |
| /* ioc determines which port to use */ |
| smp_request->PhysicalPort = 0xFF; |
| if (smp_request->PassthroughFlags & |
| MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE) |
| data = (u8 *)&smp_request->SGL; |
| else { |
| if (unlikely(data_out == NULL)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| mpt2sas_base_free_smid(ioc, smid); |
| ret = -EINVAL; |
| goto out; |
| } |
| data = data_out; |
| } |
| |
| if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) { |
| ioc->ioc_link_reset_in_progress = 1; |
| ioc->ignore_loginfos = 1; |
| } |
| mpt2sas_base_put_smid_default(ioc, smid); |
| break; |
| } |
| case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: |
| { |
| Mpi2SasIoUnitControlRequest_t *sasiounit_request = |
| (Mpi2SasIoUnitControlRequest_t *)mpi_request; |
| |
| if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET |
| || sasiounit_request->Operation == |
| MPI2_SAS_OP_PHY_LINK_RESET) { |
| ioc->ioc_link_reset_in_progress = 1; |
| ioc->ignore_loginfos = 1; |
| } |
| mpt2sas_base_put_smid_default(ioc, smid); |
| break; |
| } |
| default: |
| mpt2sas_base_put_smid_default(ioc, smid); |
| break; |
| } |
| |
| if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT) |
| timeout = MPT2_IOCTL_DEFAULT_TIMEOUT; |
| else |
| timeout = karg.timeout; |
| timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, |
| timeout*HZ); |
| if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { |
| Mpi2SCSITaskManagementRequest_t *tm_request = |
| (Mpi2SCSITaskManagementRequest_t *)mpi_request; |
| mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu( |
| tm_request->DevHandle)); |
| } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH || |
| mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) && |
| ioc->ioc_link_reset_in_progress) { |
| ioc->ioc_link_reset_in_progress = 0; |
| ioc->ignore_loginfos = 0; |
| } |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { |
| printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, |
| __func__); |
| _debug_dump_mf(mpi_request, karg.data_sge_offset); |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) |
| issue_reset = 1; |
| goto issue_host_reset; |
| } |
| |
| mpi_reply = ioc->ctl_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT && |
| (ioc->logging_level & MPT_DEBUG_TM)) { |
| Mpi2SCSITaskManagementReply_t *tm_reply = |
| (Mpi2SCSITaskManagementReply_t *)mpi_reply; |
| |
| printk(MPT2SAS_INFO_FMT "TASK_MGMT: " |
| "IOCStatus(0x%04x), IOCLogInfo(0x%08x), " |
| "TerminationCount(0x%08x)\n", ioc->name, |
| le16_to_cpu(tm_reply->IOCStatus), |
| le32_to_cpu(tm_reply->IOCLogInfo), |
| le32_to_cpu(tm_reply->TerminationCount)); |
| } |
| #endif |
| /* copy out xdata to user */ |
| if (data_in_sz) { |
| if (copy_to_user(karg.data_in_buf_ptr, data_in, |
| data_in_sz)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -ENODATA; |
| goto out; |
| } |
| } |
| |
| /* copy out reply message frame to user */ |
| if (karg.max_reply_bytes) { |
| sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz); |
| if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply, |
| sz)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -ENODATA; |
| goto out; |
| } |
| } |
| |
| /* copy out sense to user */ |
| if (karg.max_sense_bytes && (mpi_request->Function == |
| MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function == |
| MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { |
| sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE); |
| if (copy_to_user(karg.sense_data_ptr, |
| ioc->ctl_cmds.sense, sz)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, |
| __LINE__, __func__); |
| ret = -ENODATA; |
| goto out; |
| } |
| } |
| |
| issue_host_reset: |
| if (issue_reset) { |
| ret = -ENODATA; |
| if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| mpi_request->Function == |
| MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || |
| mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) { |
| printk(MPT2SAS_INFO_FMT "issue target reset: handle " |
| "= (0x%04x)\n", ioc->name, |
| le16_to_cpu(mpi_request->FunctionDependent1)); |
| mpt2sas_halt_firmware(ioc); |
| mpt2sas_scsih_issue_tm(ioc, |
| le16_to_cpu(mpi_request->FunctionDependent1), 0, 0, |
| 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10, |
| 0, TM_MUTEX_ON); |
| ioc->tm_cmds.status = MPT2_CMD_NOT_USED; |
| } else |
| mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| } |
| |
| out: |
| |
| /* free memory associated with sg buffers */ |
| if (data_in) |
| pci_free_consistent(ioc->pdev, data_in_sz, data_in, |
| data_in_dma); |
| |
| if (data_out) |
| pci_free_consistent(ioc->pdev, data_out_sz, data_out, |
| data_out_dma); |
| |
| kfree(mpi_request); |
| ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; |
| return ret; |
| } |
| |
| /** |
| * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_getiocinfo(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_iocinfo karg; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| memset(&karg, 0 , sizeof(karg)); |
| if (ioc->is_warpdrive) |
| karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200; |
| else |
| karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; |
| if (ioc->pfacts) |
| karg.port_number = ioc->pfacts[0].PortNumber; |
| karg.hw_rev = ioc->pdev->revision; |
| karg.pci_id = ioc->pdev->device; |
| karg.subsystem_device = ioc->pdev->subsystem_device; |
| karg.subsystem_vendor = ioc->pdev->subsystem_vendor; |
| karg.pci_information.u.bits.bus = ioc->pdev->bus->number; |
| karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn); |
| karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); |
| karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); |
| karg.firmware_version = ioc->facts.FWVersion.Word; |
| strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME); |
| strcat(karg.driver_version, "-"); |
| strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); |
| karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); |
| |
| if (copy_to_user(arg, &karg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_eventquery(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_eventquery karg; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE; |
| memcpy(karg.event_types, ioc->event_type, |
| MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); |
| |
| if (copy_to_user(arg, &karg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_eventenable(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_eventenable karg; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| if (ioc->event_log) |
| return 0; |
| memcpy(ioc->event_type, karg.event_types, |
| MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); |
| mpt2sas_base_validate_event_type(ioc, ioc->event_type); |
| |
| /* initialize event_log */ |
| ioc->event_context = 0; |
| ioc->aen_event_read_flag = 0; |
| ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE, |
| sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL); |
| if (!ioc->event_log) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_eventreport(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_eventreport karg; |
| u32 number_bytes, max_events, max; |
| struct mpt2_ioctl_eventreport __user *uarg = arg; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| number_bytes = karg.hdr.max_data_size - |
| sizeof(struct mpt2_ioctl_header); |
| max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS); |
| max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events); |
| |
| /* If fewer than 1 event is requested, there must have |
| * been some type of error. |
| */ |
| if (!max || !ioc->event_log) |
| return -ENODATA; |
| |
| number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS); |
| if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| /* reset flag so SIGIO can restart */ |
| ioc->aen_event_read_flag = 0; |
| return 0; |
| } |
| |
| /** |
| * _ctl_do_reset - main handler for MPT2HARDRESET opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_do_reset(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_diag_reset karg; |
| int retval; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| if (ioc->shost_recovery || ioc->pci_error_recovery || |
| ioc->is_driver_loading) |
| return -EAGAIN; |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
| __func__)); |
| |
| retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| printk(MPT2SAS_INFO_FMT "host reset: %s\n", |
| ioc->name, ((!retval) ? "SUCCESS" : "FAILED")); |
| return 0; |
| } |
| |
| /** |
| * _ctl_btdh_search_sas_device - searching for sas device |
| * @ioc: per adapter object |
| * @btdh: btdh ioctl payload |
| */ |
| static int |
| _ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc, |
| struct mpt2_ioctl_btdh_mapping *btdh) |
| { |
| struct _sas_device *sas_device; |
| unsigned long flags; |
| int rc = 0; |
| |
| if (list_empty(&ioc->sas_device_list)) |
| return rc; |
| |
| spin_lock_irqsave(&ioc->sas_device_lock, flags); |
| list_for_each_entry(sas_device, &ioc->sas_device_list, list) { |
| if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && |
| btdh->handle == sas_device->handle) { |
| btdh->bus = sas_device->channel; |
| btdh->id = sas_device->id; |
| rc = 1; |
| goto out; |
| } else if (btdh->bus == sas_device->channel && btdh->id == |
| sas_device->id && btdh->handle == 0xFFFF) { |
| btdh->handle = sas_device->handle; |
| rc = 1; |
| goto out; |
| } |
| } |
| out: |
| spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
| return rc; |
| } |
| |
| /** |
| * _ctl_btdh_search_raid_device - searching for raid device |
| * @ioc: per adapter object |
| * @btdh: btdh ioctl payload |
| */ |
| static int |
| _ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc, |
| struct mpt2_ioctl_btdh_mapping *btdh) |
| { |
| struct _raid_device *raid_device; |
| unsigned long flags; |
| int rc = 0; |
| |
| if (list_empty(&ioc->raid_device_list)) |
| return rc; |
| |
| spin_lock_irqsave(&ioc->raid_device_lock, flags); |
| list_for_each_entry(raid_device, &ioc->raid_device_list, list) { |
| if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && |
| btdh->handle == raid_device->handle) { |
| btdh->bus = raid_device->channel; |
| btdh->id = raid_device->id; |
| rc = 1; |
| goto out; |
| } else if (btdh->bus == raid_device->channel && btdh->id == |
| raid_device->id && btdh->handle == 0xFFFF) { |
| btdh->handle = raid_device->handle; |
| rc = 1; |
| goto out; |
| } |
| } |
| out: |
| spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
| return rc; |
| } |
| |
| /** |
| * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_btdh_mapping(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_ioctl_btdh_mapping karg; |
| int rc; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| rc = _ctl_btdh_search_sas_device(ioc, &karg); |
| if (!rc) |
| _ctl_btdh_search_raid_device(ioc, &karg); |
| |
| if (copy_to_user(arg, &karg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_diag_capability - return diag buffer capability |
| * @ioc: per adapter object |
| * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED |
| * |
| * returns 1 when diag buffer support is enabled in firmware |
| */ |
| static u8 |
| _ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type) |
| { |
| u8 rc = 0; |
| |
| switch (buffer_type) { |
| case MPI2_DIAG_BUF_TYPE_TRACE: |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) |
| rc = 1; |
| break; |
| case MPI2_DIAG_BUF_TYPE_SNAPSHOT: |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) |
| rc = 1; |
| break; |
| case MPI2_DIAG_BUF_TYPE_EXTENDED: |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) |
| rc = 1; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * _ctl_diag_register_2 - wrapper for registering diag buffer support |
| * @ioc: per adapter object |
| * @diag_register: the diag_register struct passed in from user space |
| * |
| */ |
| static long |
| _ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc, |
| struct mpt2_diag_register *diag_register) |
| { |
| int rc, i; |
| void *request_data = NULL; |
| dma_addr_t request_data_dma; |
| u32 request_data_sz = 0; |
| Mpi2DiagBufferPostRequest_t *mpi_request; |
| Mpi2DiagBufferPostReply_t *mpi_reply; |
| u8 buffer_type; |
| unsigned long timeleft; |
| u16 smid; |
| u16 ioc_status; |
| u8 issue_reset = 0; |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { |
| printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| buffer_type = diag_register->buffer_type; |
| if (!_ctl_diag_capability(ioc, buffer_type)) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -EPERM; |
| } |
| |
| if (ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) { |
| printk(MPT2SAS_ERR_FMT "%s: already has a registered " |
| "buffer for buffer_type(0x%02x)\n", ioc->name, __func__, |
| buffer_type); |
| return -EINVAL; |
| } |
| |
| if (diag_register->requested_buffer_size % 4) { |
| printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size " |
| "is not 4 byte aligned\n", ioc->name, __func__); |
| return -EINVAL; |
| } |
| |
| smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->ctl_cmds.status = MPT2_CMD_PENDING; |
| memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); |
| mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| ioc->ctl_cmds.smid = smid; |
| |
| request_data = ioc->diag_buffer[buffer_type]; |
| request_data_sz = diag_register->requested_buffer_size; |
| ioc->unique_id[buffer_type] = diag_register->unique_id; |
| ioc->diag_buffer_status[buffer_type] = 0; |
| memcpy(ioc->product_specific[buffer_type], |
| diag_register->product_specific, MPT2_PRODUCT_SPECIFIC_DWORDS); |
| ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags; |
| |
| if (request_data) { |
| request_data_dma = ioc->diag_buffer_dma[buffer_type]; |
| if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) { |
| pci_free_consistent(ioc->pdev, |
| ioc->diag_buffer_sz[buffer_type], |
| request_data, request_data_dma); |
| request_data = NULL; |
| } |
| } |
| |
| if (request_data == NULL) { |
| ioc->diag_buffer_sz[buffer_type] = 0; |
| ioc->diag_buffer_dma[buffer_type] = 0; |
| request_data = pci_alloc_consistent( |
| ioc->pdev, request_data_sz, &request_data_dma); |
| if (request_data == NULL) { |
| printk(MPT2SAS_ERR_FMT "%s: failed allocating memory" |
| " for diag buffers, requested size(%d)\n", |
| ioc->name, __func__, request_data_sz); |
| mpt2sas_base_free_smid(ioc, smid); |
| return -ENOMEM; |
| } |
| ioc->diag_buffer[buffer_type] = request_data; |
| ioc->diag_buffer_sz[buffer_type] = request_data_sz; |
| ioc->diag_buffer_dma[buffer_type] = request_data_dma; |
| } |
| |
| mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; |
| mpi_request->BufferType = diag_register->buffer_type; |
| mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags); |
| mpi_request->BufferAddress = cpu_to_le64(request_data_dma); |
| mpi_request->BufferLength = cpu_to_le32(request_data_sz); |
| mpi_request->VF_ID = 0; /* TODO */ |
| mpi_request->VP_ID = 0; |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(0x%p), " |
| "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data, |
| (unsigned long long)request_data_dma, |
| le32_to_cpu(mpi_request->BufferLength))); |
| |
| for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) |
| mpi_request->ProductSpecific[i] = |
| cpu_to_le32(ioc->product_specific[buffer_type][i]); |
| |
| init_completion(&ioc->ctl_cmds.done); |
| mpt2sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, |
| MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); |
| |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { |
| printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, |
| __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2DiagBufferPostRequest_t)/4); |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) |
| issue_reset = 1; |
| goto issue_host_reset; |
| } |
| |
| /* process the completed Reply Message Frame */ |
| if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: no reply message\n", |
| ioc->name, __func__); |
| rc = -EFAULT; |
| goto out; |
| } |
| |
| mpi_reply = ioc->ctl_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| ioc->diag_buffer_status[buffer_type] |= |
| MPT2_DIAG_BUFFER_IS_REGISTERED; |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n", |
| ioc->name, __func__)); |
| } else { |
| printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) " |
| "log_info(0x%08x)\n", ioc->name, __func__, |
| ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); |
| rc = -EFAULT; |
| } |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| |
| out: |
| |
| if (rc && request_data) |
| pci_free_consistent(ioc->pdev, request_data_sz, |
| request_data, request_data_dma); |
| |
| ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; |
| return rc; |
| } |
| |
| /** |
| * mpt2sas_enable_diag_buffer - enabling diag_buffers support driver load time |
| * @ioc: per adapter object |
| * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1 |
| * |
| * This is called when command line option diag_buffer_enable is enabled |
| * at driver load time. |
| */ |
| void |
| mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, u8 bits_to_register) |
| { |
| struct mpt2_diag_register diag_register; |
| |
| memset(&diag_register, 0, sizeof(struct mpt2_diag_register)); |
| |
| if (bits_to_register & 1) { |
| printk(MPT2SAS_INFO_FMT "registering trace buffer support\n", |
| ioc->name); |
| diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE; |
| /* register for 1MB buffers */ |
| diag_register.requested_buffer_size = (1024 * 1024); |
| diag_register.unique_id = 0x7075900; |
| _ctl_diag_register_2(ioc, &diag_register); |
| } |
| |
| if (bits_to_register & 2) { |
| printk(MPT2SAS_INFO_FMT "registering snapshot buffer support\n", |
| ioc->name); |
| diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT; |
| /* register for 2MB buffers */ |
| diag_register.requested_buffer_size = 2 * (1024 * 1024); |
| diag_register.unique_id = 0x7075901; |
| _ctl_diag_register_2(ioc, &diag_register); |
| } |
| |
| if (bits_to_register & 4) { |
| printk(MPT2SAS_INFO_FMT "registering extended buffer support\n", |
| ioc->name); |
| diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED; |
| /* register for 2MB buffers */ |
| diag_register.requested_buffer_size = 2 * (1024 * 1024); |
| diag_register.unique_id = 0x7075901; |
| _ctl_diag_register_2(ioc, &diag_register); |
| } |
| } |
| |
| /** |
| * _ctl_diag_register - application register with driver |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| * |
| * This will allow the driver to setup any required buffers that will be |
| * needed by firmware to communicate with the driver. |
| */ |
| static long |
| _ctl_diag_register(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_diag_register karg; |
| long rc; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| rc = _ctl_diag_register_2(ioc, &karg); |
| return rc; |
| } |
| |
| /** |
| * _ctl_diag_unregister - application unregister with driver |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| * |
| * This will allow the driver to cleanup any memory allocated for diag |
| * messages and to free up any resources. |
| */ |
| static long |
| _ctl_diag_unregister(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_diag_unregister karg; |
| void *request_data; |
| dma_addr_t request_data_dma; |
| u32 request_data_sz; |
| u8 buffer_type; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| buffer_type = karg.unique_id & 0x000000ff; |
| if (!_ctl_diag_capability(ioc, buffer_type)) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -EPERM; |
| } |
| |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " |
| "registered\n", ioc->name, __func__, buffer_type); |
| return -EINVAL; |
| } |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been " |
| "released\n", ioc->name, __func__, buffer_type); |
| return -EINVAL; |
| } |
| |
| if (karg.unique_id != ioc->unique_id[buffer_type]) { |
| printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " |
| "registered\n", ioc->name, __func__, karg.unique_id); |
| return -EINVAL; |
| } |
| |
| request_data = ioc->diag_buffer[buffer_type]; |
| if (!request_data) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -ENOMEM; |
| } |
| |
| request_data_sz = ioc->diag_buffer_sz[buffer_type]; |
| request_data_dma = ioc->diag_buffer_dma[buffer_type]; |
| pci_free_consistent(ioc->pdev, request_data_sz, |
| request_data, request_data_dma); |
| ioc->diag_buffer[buffer_type] = NULL; |
| ioc->diag_buffer_status[buffer_type] = 0; |
| return 0; |
| } |
| |
| /** |
| * _ctl_diag_query - query relevant info associated with diag buffers |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| * |
| * The application will send only buffer_type and unique_id. Driver will |
| * inspect unique_id first, if valid, fill in all the info. If unique_id is |
| * 0x00, the driver will return info specified by Buffer Type. |
| */ |
| static long |
| _ctl_diag_query(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_diag_query karg; |
| void *request_data; |
| int i; |
| u8 buffer_type; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| karg.application_flags = 0; |
| buffer_type = karg.buffer_type; |
| |
| if (!_ctl_diag_capability(ioc, buffer_type)) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -EPERM; |
| } |
| |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " |
| "registered\n", ioc->name, __func__, buffer_type); |
| return -EINVAL; |
| } |
| |
| if (karg.unique_id & 0xffffff00) { |
| if (karg.unique_id != ioc->unique_id[buffer_type]) { |
| printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " |
| "registered\n", ioc->name, __func__, |
| karg.unique_id); |
| return -EINVAL; |
| } |
| } |
| |
| request_data = ioc->diag_buffer[buffer_type]; |
| if (!request_data) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -ENOMEM; |
| } |
| |
| if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED) |
| karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | |
| MPT2_APP_FLAGS_BUFFER_VALID); |
| else |
| karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | |
| MPT2_APP_FLAGS_BUFFER_VALID | |
| MPT2_APP_FLAGS_FW_BUFFER_ACCESS); |
| |
| for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) |
| karg.product_specific[i] = |
| ioc->product_specific[buffer_type][i]; |
| |
| karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type]; |
| karg.driver_added_buffer_size = 0; |
| karg.unique_id = ioc->unique_id[buffer_type]; |
| karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type]; |
| |
| if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) { |
| printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query " |
| "data @ %p\n", ioc->name, __func__, arg); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| /** |
| * _ctl_send_release - Diag Release Message |
| * @ioc: per adapter object |
| * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED |
| * @issue_reset - specifies whether host reset is required. |
| * |
| */ |
| static int |
| _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset) |
| { |
| Mpi2DiagReleaseRequest_t *mpi_request; |
| Mpi2DiagReleaseReply_t *mpi_reply; |
| u16 smid; |
| u16 ioc_status; |
| u32 ioc_state; |
| int rc; |
| unsigned long timeleft; |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| rc = 0; |
| *issue_reset = 0; |
| |
| ioc_state = mpt2sas_base_get_iocstate(ioc, 1); |
| if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "skipping due to FAULT state\n", ioc->name, |
| __func__)); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { |
| printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| ioc->ctl_cmds.status = MPT2_CMD_PENDING; |
| memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); |
| mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| ioc->ctl_cmds.smid = smid; |
| |
| mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE; |
| mpi_request->BufferType = buffer_type; |
| mpi_request->VF_ID = 0; /* TODO */ |
| mpi_request->VP_ID = 0; |
| |
| init_completion(&ioc->ctl_cmds.done); |
| mpt2sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, |
| MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); |
| |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { |
| printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, |
| __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2DiagReleaseRequest_t)/4); |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) |
| *issue_reset = 1; |
| rc = -EFAULT; |
| goto out; |
| } |
| |
| /* process the completed Reply Message Frame */ |
| if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: no reply message\n", |
| ioc->name, __func__); |
| rc = -EFAULT; |
| goto out; |
| } |
| |
| mpi_reply = ioc->ctl_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| ioc->diag_buffer_status[buffer_type] |= |
| MPT2_DIAG_BUFFER_IS_RELEASED; |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n", |
| ioc->name, __func__)); |
| } else { |
| printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) " |
| "log_info(0x%08x)\n", ioc->name, __func__, |
| ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); |
| rc = -EFAULT; |
| } |
| |
| out: |
| ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; |
| return rc; |
| } |
| |
| /** |
| * _ctl_diag_release - request to send Diag Release Message to firmware |
| * @arg - user space buffer containing ioctl content |
| * |
| * This allows ownership of the specified buffer to returned to the driver, |
| * allowing an application to read the buffer without fear that firmware is |
| * overwritting information in the buffer. |
| */ |
| static long |
| _ctl_diag_release(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_diag_release karg; |
| void *request_data; |
| int rc; |
| u8 buffer_type; |
| u8 issue_reset = 0; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| buffer_type = karg.unique_id & 0x000000ff; |
| if (!_ctl_diag_capability(ioc, buffer_type)) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -EPERM; |
| } |
| |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " |
| "registered\n", ioc->name, __func__, buffer_type); |
| return -EINVAL; |
| } |
| |
| if (karg.unique_id != ioc->unique_id[buffer_type]) { |
| printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " |
| "registered\n", ioc->name, __func__, karg.unique_id); |
| return -EINVAL; |
| } |
| |
| if (ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_RELEASED) { |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " |
| "is already released\n", ioc->name, __func__, |
| buffer_type); |
| return 0; |
| } |
| |
| request_data = ioc->diag_buffer[buffer_type]; |
| |
| if (!request_data) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -ENOMEM; |
| } |
| |
| /* buffers were released by due to host reset */ |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_DIAG_RESET)) { |
| ioc->diag_buffer_status[buffer_type] |= |
| MPT2_DIAG_BUFFER_IS_RELEASED; |
| ioc->diag_buffer_status[buffer_type] &= |
| ~MPT2_DIAG_BUFFER_IS_DIAG_RESET; |
| printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " |
| "was released due to host reset\n", ioc->name, __func__, |
| buffer_type); |
| return 0; |
| } |
| |
| rc = _ctl_send_release(ioc, buffer_type, &issue_reset); |
| |
| if (issue_reset) |
| mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| |
| return rc; |
| } |
| |
| /** |
| * _ctl_diag_read_buffer - request for copy of the diag buffer |
| * @ioc: per adapter object |
| * @arg - user space buffer containing ioctl content |
| */ |
| static long |
| _ctl_diag_read_buffer(struct MPT2SAS_ADAPTER *ioc, void __user *arg) |
| { |
| struct mpt2_diag_read_buffer karg; |
| struct mpt2_diag_read_buffer __user *uarg = arg; |
| void *request_data, *diag_data; |
| Mpi2DiagBufferPostRequest_t *mpi_request; |
| Mpi2DiagBufferPostReply_t *mpi_reply; |
| int rc, i; |
| u8 buffer_type; |
| unsigned long timeleft, request_size, copy_size; |
| u16 smid; |
| u16 ioc_status; |
| u8 issue_reset = 0; |
| |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
| __func__)); |
| |
| buffer_type = karg.unique_id & 0x000000ff; |
| if (!_ctl_diag_capability(ioc, buffer_type)) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -EPERM; |
| } |
| |
| if (karg.unique_id != ioc->unique_id[buffer_type]) { |
| printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " |
| "registered\n", ioc->name, __func__, karg.unique_id); |
| return -EINVAL; |
| } |
| |
| request_data = ioc->diag_buffer[buffer_type]; |
| if (!request_data) { |
| printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); |
| return -ENOMEM; |
| } |
| |
| request_size = ioc->diag_buffer_sz[buffer_type]; |
| |
| if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { |
| printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " |
| "or bytes_to_read are not 4 byte aligned\n", ioc->name, |
| __func__); |
| return -EINVAL; |
| } |
| |
| if (karg.starting_offset > request_size) |
| return -EINVAL; |
| |
| diag_data = (void *)(request_data + karg.starting_offset); |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), " |
| "offset(%d), sz(%d)\n", ioc->name, __func__, |
| diag_data, karg.starting_offset, karg.bytes_to_read)); |
| |
| /* Truncate data on requests that are too large */ |
| if ((diag_data + karg.bytes_to_read < diag_data) || |
| (diag_data + karg.bytes_to_read > request_data + request_size)) |
| copy_size = request_size - karg.starting_offset; |
| else |
| copy_size = karg.bytes_to_read; |
| |
| if (copy_to_user((void __user *)uarg->diagnostic_data, |
| diag_data, copy_size)) { |
| printk(MPT2SAS_ERR_FMT "%s: Unable to write " |
| "mpt_diag_read_buffer_t data @ %p\n", ioc->name, |
| __func__, diag_data); |
| return -EFAULT; |
| } |
| |
| if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0) |
| return 0; |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: Reregister " |
| "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type)); |
| if ((ioc->diag_buffer_status[buffer_type] & |
| MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
| "buffer_type(0x%02x) is still registered\n", ioc->name, |
| __func__, buffer_type)); |
| return 0; |
| } |
| /* Get a free request frame and save the message context. |
| */ |
| |
| if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { |
| printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->ctl_cmds.status = MPT2_CMD_PENDING; |
| memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); |
| mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| ioc->ctl_cmds.smid = smid; |
| |
| mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; |
| mpi_request->BufferType = buffer_type; |
| mpi_request->BufferLength = |
| cpu_to_le32(ioc->diag_buffer_sz[buffer_type]); |
| mpi_request->BufferAddress = |
| cpu_to_le64(ioc->diag_buffer_dma[buffer_type]); |
| for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) |
| mpi_request->ProductSpecific[i] = |
| cpu_to_le32(ioc->product_specific[buffer_type][i]); |
| mpi_request->VF_ID = 0; /* TODO */ |
| mpi_request->VP_ID = 0; |
| |
| init_completion(&ioc->ctl_cmds.done); |
| mpt2sas_base_put_smid_default(ioc, smid); |
| timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, |
| MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); |
| |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { |
| printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, |
| __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2DiagBufferPostRequest_t)/4); |
| if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) |
| issue_reset = 1; |
| goto issue_host_reset; |
| } |
| |
| /* process the completed Reply Message Frame */ |
| if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: no reply message\n", |
| ioc->name, __func__); |
| rc = -EFAULT; |
| goto out; |
| } |
| |
| mpi_reply = ioc->ctl_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| ioc->diag_buffer_status[buffer_type] |= |
| MPT2_DIAG_BUFFER_IS_REGISTERED; |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n", |
| ioc->name, __func__)); |
| } else { |
| printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) " |
| "log_info(0x%08x)\n", ioc->name, __func__, |
| ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo)); |
| rc = -EFAULT; |
| } |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| |
| out: |
| |
| ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; |
| return rc; |
| } |
| |
| |
| #ifdef CONFIG_COMPAT |
| /** |
| * _ctl_compat_mpt_command - convert 32bit pointers to 64bit. |
| * @ioc: per adapter object |
| * @cmd - ioctl opcode |
| * @arg - (struct mpt2_ioctl_command32) |
| * |
| * MPT2COMMAND32 - Handle 32bit applications running on 64bit os. |
| */ |
| static long |
| _ctl_compat_mpt_command(struct MPT2SAS_ADAPTER *ioc, unsigned cmd, |
| void __user *arg) |
| { |
| struct mpt2_ioctl_command32 karg32; |
| struct mpt2_ioctl_command32 __user *uarg; |
| struct mpt2_ioctl_command karg; |
| |
| if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32)) |
| return -EINVAL; |
| |
| uarg = (struct mpt2_ioctl_command32 __user *) arg; |
| |
| if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| memset(&karg, 0, sizeof(struct mpt2_ioctl_command)); |
| karg.hdr.ioc_number = karg32.hdr.ioc_number; |
| karg.hdr.port_number = karg32.hdr.port_number; |
| karg.hdr.max_data_size = karg32.hdr.max_data_size; |
| karg.timeout = karg32.timeout; |
| karg.max_reply_bytes = karg32.max_reply_bytes; |
| karg.data_in_size = karg32.data_in_size; |
| karg.data_out_size = karg32.data_out_size; |
| karg.max_sense_bytes = karg32.max_sense_bytes; |
| karg.data_sge_offset = karg32.data_sge_offset; |
| karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr); |
| karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr); |
| karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr); |
| karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr); |
| return _ctl_do_mpt_command(ioc, karg, &uarg->mf); |
| } |
| #endif |
| |
| /** |
| * _ctl_ioctl_main - main ioctl entry point |
| * @file - (struct file) |
| * @cmd - ioctl opcode |
| * @arg - |
| * compat - handles 32 bit applications in 64bit os |
| */ |
| static long |
| _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, |
| u8 compat) |
| { |
| struct MPT2SAS_ADAPTER *ioc; |
| struct mpt2_ioctl_header ioctl_header; |
| enum block_state state; |
| long ret = -EINVAL; |
| |
| /* get IOCTL header */ |
| if (copy_from_user(&ioctl_header, (char __user *)arg, |
| sizeof(struct mpt2_ioctl_header))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -EFAULT; |
| } |
| |
| if (_ctl_verify_adapter(ioctl_header.ioc_number, &ioc) == -1 || !ioc) |
| return -ENODEV; |
| if (ioc->shost_recovery || ioc->pci_error_recovery || |
| ioc->is_driver_loading) |
| return -EAGAIN; |
| |
| state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING; |
| if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) |
| return -EAGAIN; |
| else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) |
| return -ERESTARTSYS; |
| |
| switch (cmd) { |
| case MPT2IOCINFO: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo)) |
| ret = _ctl_getiocinfo(ioc, arg); |
| break; |
| #ifdef CONFIG_COMPAT |
| case MPT2COMMAND32: |
| #endif |
| case MPT2COMMAND: |
| { |
| struct mpt2_ioctl_command __user *uarg; |
| struct mpt2_ioctl_command karg; |
| #ifdef CONFIG_COMPAT |
| if (compat) { |
| ret = _ctl_compat_mpt_command(ioc, cmd, arg); |
| break; |
| } |
| #endif |
| if (copy_from_user(&karg, arg, sizeof(karg))) { |
| printk(KERN_ERR "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| ret = -EFAULT; |
| break; |
| } |
| |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) { |
| uarg = arg; |
| ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf); |
| } |
| break; |
| } |
| case MPT2EVENTQUERY: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery)) |
| ret = _ctl_eventquery(ioc, arg); |
| break; |
| case MPT2EVENTENABLE: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable)) |
| ret = _ctl_eventenable(ioc, arg); |
| break; |
| case MPT2EVENTREPORT: |
| ret = _ctl_eventreport(ioc, arg); |
| break; |
| case MPT2HARDRESET: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset)) |
| ret = _ctl_do_reset(ioc, arg); |
| break; |
| case MPT2BTDHMAPPING: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping)) |
| ret = _ctl_btdh_mapping(ioc, arg); |
| break; |
| case MPT2DIAGREGISTER: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register)) |
| ret = _ctl_diag_register(ioc, arg); |
| break; |
| case MPT2DIAGUNREGISTER: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister)) |
| ret = _ctl_diag_unregister(ioc, arg); |
| break; |
| case MPT2DIAGQUERY: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query)) |
| ret = _ctl_diag_query(ioc, arg); |
| break; |
| case MPT2DIAGRELEASE: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release)) |
| ret = _ctl_diag_release(ioc, arg); |
| break; |
| case MPT2DIAGREADBUFFER: |
| if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer)) |
| ret = _ctl_diag_read_buffer(ioc, arg); |
| break; |
| default: |
| |
| dctlprintk(ioc, printk(MPT2SAS_INFO_FMT |
| "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd)); |
| break; |
| } |
| |
| mutex_unlock(&ioc->ctl_cmds.mutex); |
| return ret; |
| } |
| |
| /** |
| * _ctl_ioctl - main ioctl entry point (unlocked) |
| * @file - (struct file) |
| * @cmd - ioctl opcode |
| * @arg - |
| */ |
| static long |
| _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| long ret; |
| |
| ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0); |
| return ret; |
| } |
| #ifdef CONFIG_COMPAT |
| /** |
| * _ctl_ioctl_compat - main ioctl entry point (compat) |
| * @file - |
| * @cmd - |
| * @arg - |
| * |
| * This routine handles 32 bit applications in 64bit os. |
| */ |
| static long |
| _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) |
| { |
| long ret; |
| |
| ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1); |
| return ret; |
| } |
| #endif |
| |
| /* scsi host attributes */ |
| |
| /** |
| * _ctl_version_fw_show - firmware version |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", |
| (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, |
| (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, |
| (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, |
| ioc->facts.FWVersion.Word & 0x000000FF); |
| } |
| static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); |
| |
| /** |
| * _ctl_version_bios_show - bios version |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion); |
| |
| return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", |
| (version & 0xFF000000) >> 24, |
| (version & 0x00FF0000) >> 16, |
| (version & 0x0000FF00) >> 8, |
| version & 0x000000FF); |
| } |
| static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); |
| |
| /** |
| * _ctl_version_mpi_show - MPI (message passing interface) version |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%03x.%02x\n", |
| ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8); |
| } |
| static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); |
| |
| /** |
| * _ctl_version_product_show - product name |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_product_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName); |
| } |
| static DEVICE_ATTR(version_product, S_IRUGO, |
| _ctl_version_product_show, NULL); |
| |
| /** |
| * _ctl_version_nvdata_persistent_show - ndvata persistent version |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_nvdata_persistent_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%08xh\n", |
| le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); |
| } |
| static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, |
| _ctl_version_nvdata_persistent_show, NULL); |
| |
| /** |
| * _ctl_version_nvdata_default_show - nvdata default version |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_version_nvdata_default_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%08xh\n", |
| le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); |
| } |
| static DEVICE_ATTR(version_nvdata_default, S_IRUGO, |
| _ctl_version_nvdata_default_show, NULL); |
| |
| /** |
| * _ctl_board_name_show - board name |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_board_name_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName); |
| } |
| static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); |
| |
| /** |
| * _ctl_board_assembly_show - board assembly name |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly); |
| } |
| static DEVICE_ATTR(board_assembly, S_IRUGO, |
| _ctl_board_assembly_show, NULL); |
| |
| /** |
| * _ctl_board_tracer_show - board tracer number |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber); |
| } |
| static DEVICE_ATTR(board_tracer, S_IRUGO, |
| _ctl_board_tracer_show, NULL); |
| |
| /** |
| * _ctl_io_delay_show - io missing delay |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is for firmware implemention for deboucing device |
| * removal events. |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); |
| } |
| static DEVICE_ATTR(io_delay, S_IRUGO, |
| _ctl_io_delay_show, NULL); |
| |
| /** |
| * _ctl_device_delay_show - device missing delay |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is for firmware implemention for deboucing device |
| * removal events. |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); |
| } |
| static DEVICE_ATTR(device_delay, S_IRUGO, |
| _ctl_device_delay_show, NULL); |
| |
| /** |
| * _ctl_fw_queue_depth_show - global credits |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is firmware queue depth limit |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit); |
| } |
| static DEVICE_ATTR(fw_queue_depth, S_IRUGO, |
| _ctl_fw_queue_depth_show, NULL); |
| |
| /** |
| * _ctl_sas_address_show - sas address |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is the controller sas address |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "0x%016llx\n", |
| (unsigned long long)ioc->sas_hba.sas_address); |
| } |
| static DEVICE_ATTR(host_sas_address, S_IRUGO, |
| _ctl_host_sas_address_show, NULL); |
| |
| /** |
| * _ctl_logging_level_show - logging level |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read/write' shost attribute. |
| */ |
| static ssize_t |
| _ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level); |
| } |
| static ssize_t |
| _ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| int val = 0; |
| |
| if (sscanf(buf, "%x", &val) != 1) |
| return -EINVAL; |
| |
| ioc->logging_level = val; |
| printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name, |
| ioc->logging_level); |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, |
| _ctl_logging_level_show, _ctl_logging_level_store); |
| |
| /* device attributes */ |
| /* |
| * _ctl_fwfault_debug_show - show/store fwfault_debug |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * mpt2sas_fwfault_debug is command line option |
| * A sysfs 'read/write' shost attribute. |
| */ |
| static ssize_t |
| _ctl_fwfault_debug_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug); |
| } |
| static ssize_t |
| _ctl_fwfault_debug_store(struct device *cdev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| int val = 0; |
| |
| if (sscanf(buf, "%d", &val) != 1) |
| return -EINVAL; |
| |
| ioc->fwfault_debug = val; |
| printk(MPT2SAS_INFO_FMT "fwfault_debug=%d\n", ioc->name, |
| ioc->fwfault_debug); |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR, |
| _ctl_fwfault_debug_show, _ctl_fwfault_debug_store); |
| |
| |
| /** |
| * _ctl_ioc_reset_count_show - ioc reset count |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is firmware queue depth limit |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| return snprintf(buf, PAGE_SIZE, "%08d\n", ioc->ioc_reset_count); |
| } |
| static DEVICE_ATTR(ioc_reset_count, S_IRUGO, |
| _ctl_ioc_reset_count_show, NULL); |
| |
| /** |
| * _ctl_ioc_reply_queue_count_show - number of reply queues |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is number of reply queues |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_ioc_reply_queue_count_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| u8 reply_queue_count; |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| if ((ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable) |
| reply_queue_count = ioc->reply_queue_count; |
| else |
| reply_queue_count = 1; |
| return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count); |
| } |
| static DEVICE_ATTR(reply_queue_count, S_IRUGO, |
| _ctl_ioc_reply_queue_count_show, NULL); |
| |
| /** |
| * _ctl_BRM_status_show - Backup Rail Monitor Status |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is number of reply queues |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_BRM_status_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| Mpi2IOUnitPage3_t *io_unit_pg3 = NULL; |
| Mpi2ConfigReply_t mpi_reply; |
| u16 backup_rail_monitor_status = 0; |
| u16 ioc_status; |
| int sz; |
| ssize_t rc = 0; |
| |
| if (!ioc->is_warpdrive) { |
| printk(MPT2SAS_ERR_FMT "%s: BRM attribute is only for"\ |
| "warpdrive\n", ioc->name, __func__); |
| goto out; |
| } |
| |
| /* allocate upto GPIOVal 36 entries */ |
| sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36); |
| io_unit_pg3 = kzalloc(sz, GFP_KERNEL); |
| if (!io_unit_pg3) { |
| printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"\ |
| "for iounit_pg3: (%d) bytes\n", ioc->name, __func__, sz); |
| goto out; |
| } |
| |
| if (mpt2sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) != |
| 0) { |
| printk(MPT2SAS_ERR_FMT |
| "%s: failed reading iounit_pg3\n", ioc->name, |
| __func__); |
| goto out; |
| } |
| |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
| printk(MPT2SAS_ERR_FMT "%s: iounit_pg3 failed with"\ |
| "ioc_status(0x%04x)\n", ioc->name, __func__, ioc_status); |
| goto out; |
| } |
| |
| if (io_unit_pg3->GPIOCount < 25) { |
| printk(MPT2SAS_ERR_FMT "%s: iounit_pg3->GPIOCount less than"\ |
| "25 entries, detected (%d) entries\n", ioc->name, __func__, |
| io_unit_pg3->GPIOCount); |
| goto out; |
| } |
| |
| /* BRM status is in bit zero of GPIOVal[24] */ |
| backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); |
| rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1)); |
| |
| out: |
| kfree(io_unit_pg3); |
| return rc; |
| } |
| static DEVICE_ATTR(BRM_status, S_IRUGO, _ctl_BRM_status_show, NULL); |
| |
| struct DIAG_BUFFER_START { |
| __le32 Size; |
| __le32 DiagVersion; |
| u8 BufferType; |
| u8 Reserved[3]; |
| __le32 Reserved1; |
| __le32 Reserved2; |
| __le32 Reserved3; |
| }; |
| /** |
| * _ctl_host_trace_buffer_size_show - host buffer size (trace only) |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_host_trace_buffer_size_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| u32 size = 0; |
| struct DIAG_BUFFER_START *request_data; |
| |
| if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) { |
| printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not " |
| "registered\n", ioc->name, __func__); |
| return 0; |
| } |
| |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not " |
| "registered\n", ioc->name, __func__); |
| return 0; |
| } |
| |
| request_data = (struct DIAG_BUFFER_START *) |
| ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]; |
| if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 || |
| le32_to_cpu(request_data->DiagVersion) == 0x01000000) && |
| le32_to_cpu(request_data->Reserved3) == 0x4742444c) |
| size = le32_to_cpu(request_data->Size); |
| |
| ioc->ring_buffer_sz = size; |
| return snprintf(buf, PAGE_SIZE, "%d\n", size); |
| } |
| static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO, |
| _ctl_host_trace_buffer_size_show, NULL); |
| |
| /** |
| * _ctl_host_trace_buffer_show - firmware ring buffer (trace only) |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read/write' shost attribute. |
| * |
| * You will only be able to read 4k bytes of ring buffer at a time. |
| * In order to read beyond 4k bytes, you will have to write out the |
| * offset to the same attribute, it will move the pointer. |
| */ |
| static ssize_t |
| _ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| void *request_data; |
| u32 size; |
| |
| if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) { |
| printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not " |
| "registered\n", ioc->name, __func__); |
| return 0; |
| } |
| |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { |
| printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not " |
| "registered\n", ioc->name, __func__); |
| return 0; |
| } |
| |
| if (ioc->ring_buffer_offset > ioc->ring_buffer_sz) |
| return 0; |
| |
| size = ioc->ring_buffer_sz - ioc->ring_buffer_offset; |
| size = (size > PAGE_SIZE) ? PAGE_SIZE : size; |
| request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset; |
| memcpy(buf, request_data, size); |
| return size; |
| } |
| |
| static ssize_t |
| _ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| int val = 0; |
| |
| if (sscanf(buf, "%d", &val) != 1) |
| return -EINVAL; |
| |
| ioc->ring_buffer_offset = val; |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR, |
| _ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store); |
| |
| /*****************************************/ |
| |
| /** |
| * _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only) |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * A sysfs 'read/write' shost attribute. |
| * |
| * This is a mechnism to post/release host_trace_buffers |
| */ |
| static ssize_t |
| _ctl_host_trace_buffer_enable_show(struct device *cdev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| |
| if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) || |
| ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0)) |
| return snprintf(buf, PAGE_SIZE, "off\n"); |
| else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_RELEASED)) |
| return snprintf(buf, PAGE_SIZE, "release\n"); |
| else |
| return snprintf(buf, PAGE_SIZE, "post\n"); |
| } |
| |
| static ssize_t |
| _ctl_host_trace_buffer_enable_store(struct device *cdev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(cdev); |
| struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
| char str[10] = ""; |
| struct mpt2_diag_register diag_register; |
| u8 issue_reset = 0; |
| |
| if (sscanf(buf, "%9s", str) != 1) |
| return -EINVAL; |
| |
| if (!strcmp(str, "post")) { |
| /* exit out if host buffers are already posted */ |
| if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) && |
| (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) && |
| ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_RELEASED) == 0)) |
| goto out; |
| memset(&diag_register, 0, sizeof(struct mpt2_diag_register)); |
| printk(MPT2SAS_INFO_FMT "posting host trace buffers\n", |
| ioc->name); |
| diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE; |
| diag_register.requested_buffer_size = (1024 * 1024); |
| diag_register.unique_id = 0x7075900; |
| ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0; |
| _ctl_diag_register_2(ioc, &diag_register); |
| } else if (!strcmp(str, "release")) { |
| /* exit out if host buffers are already released */ |
| if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) |
| goto out; |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) |
| goto out; |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT2_DIAG_BUFFER_IS_RELEASED)) |
| goto out; |
| printk(MPT2SAS_INFO_FMT "releasing host trace buffer\n", |
| ioc->name); |
| _ctl_send_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, &issue_reset); |
| } |
| |
| out: |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR, |
| _ctl_host_trace_buffer_enable_show, _ctl_host_trace_buffer_enable_store); |
| |
| struct device_attribute *mpt2sas_host_attrs[] = { |
| &dev_attr_version_fw, |
| &dev_attr_version_bios, |
| &dev_attr_version_mpi, |
| &dev_attr_version_product, |
| &dev_attr_version_nvdata_persistent, |
| &dev_attr_version_nvdata_default, |
| &dev_attr_board_name, |
| &dev_attr_board_assembly, |
| &dev_attr_board_tracer, |
| &dev_attr_io_delay, |
| &dev_attr_device_delay, |
| &dev_attr_logging_level, |
| &dev_attr_fwfault_debug, |
| &dev_attr_fw_queue_depth, |
| &dev_attr_host_sas_address, |
| &dev_attr_ioc_reset_count, |
| &dev_attr_host_trace_buffer_size, |
| &dev_attr_host_trace_buffer, |
| &dev_attr_host_trace_buffer_enable, |
| &dev_attr_reply_queue_count, |
| &dev_attr_BRM_status, |
| NULL, |
| }; |
| |
| /** |
| * _ctl_device_sas_address_show - sas address |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is the sas address for the target |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; |
| |
| return snprintf(buf, PAGE_SIZE, "0x%016llx\n", |
| (unsigned long long)sas_device_priv_data->sas_target->sas_address); |
| } |
| static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); |
| |
| /** |
| * _ctl_device_handle_show - device handle |
| * @cdev - pointer to embedded class device |
| * @buf - the buffer returned |
| * |
| * This is the firmware assigned device handle |
| * |
| * A sysfs 'read-only' shost attribute. |
| */ |
| static ssize_t |
| _ctl_device_handle_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; |
| |
| return snprintf(buf, PAGE_SIZE, "0x%04x\n", |
| sas_device_priv_data->sas_target->handle); |
| } |
| static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); |
| |
| struct device_attribute *mpt2sas_dev_attrs[] = { |
| &dev_attr_sas_address, |
| &dev_attr_sas_device_handle, |
| NULL, |
| }; |
| |
| static const struct file_operations ctl_fops = { |
| .owner = THIS_MODULE, |
| .unlocked_ioctl = _ctl_ioctl, |
| .release = _ctl_release, |
| .poll = _ctl_poll, |
| .fasync = _ctl_fasync, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = _ctl_ioctl_compat, |
| #endif |
| .llseek = noop_llseek, |
| }; |
| |
| static struct miscdevice ctl_dev = { |
| .minor = MPT2SAS_MINOR, |
| .name = MPT2SAS_DEV_NAME, |
| .fops = &ctl_fops, |
| }; |
| |
| /** |
| * mpt2sas_ctl_init - main entry point for ctl. |
| * |
| */ |
| void |
| mpt2sas_ctl_init(void) |
| { |
| async_queue = NULL; |
| if (misc_register(&ctl_dev) < 0) |
| printk(KERN_ERR "%s can't register misc device [minor=%d]\n", |
| MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR); |
| |
| init_waitqueue_head(&ctl_poll_wait); |
| } |
| |
| /** |
| * mpt2sas_ctl_exit - exit point for ctl |
| * |
| */ |
| void |
| mpt2sas_ctl_exit(void) |
| { |
| struct MPT2SAS_ADAPTER *ioc; |
| int i; |
| |
| list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { |
| |
| /* free memory associated to diag buffers */ |
| for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { |
| if (!ioc->diag_buffer[i]) |
| continue; |
| pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i], |
| ioc->diag_buffer[i], ioc->diag_buffer_dma[i]); |
| ioc->diag_buffer[i] = NULL; |
| ioc->diag_buffer_status[i] = 0; |
| } |
| |
| kfree(ioc->event_log); |
| } |
| misc_deregister(&ctl_dev); |
| } |
| |