drivers/edac: Lindent r82600
Run r82600_edac.c file through Lindent for cleanup
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 4285958..18206ce 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -133,8 +133,8 @@
static unsigned int disable_hardware_scrub = 0;
-static void r82600_get_error_info (struct mem_ctl_info *mci,
- struct r82600_error_info *info)
+static void r82600_get_error_info(struct mem_ctl_info *mci,
+ struct r82600_error_info *info)
{
struct pci_dev *pdev;
@@ -144,18 +144,19 @@
if (info->eapr & BIT(0))
/* Clear error to allow next error to be reported [p.62] */
pci_write_bits32(pdev, R82600_EAP,
- ((u32) BIT(0) & (u32) BIT(1)),
- ((u32) BIT(0) & (u32) BIT(1)));
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
if (info->eapr & BIT(1))
/* Clear error to allow next error to be reported [p.62] */
pci_write_bits32(pdev, R82600_EAP,
- ((u32) BIT(0) & (u32) BIT(1)),
- ((u32) BIT(0) & (u32) BIT(1)));
+ ((u32) BIT(0) & (u32) BIT(1)),
+ ((u32) BIT(0) & (u32) BIT(1)));
}
-static int r82600_process_error_info (struct mem_ctl_info *mci,
- struct r82600_error_info *info, int handle_errors)
+static int r82600_process_error_info(struct mem_ctl_info *mci,
+ struct r82600_error_info *info,
+ int handle_errors)
{
int error_found;
u32 eapaddr, page;
@@ -172,25 +173,23 @@
* granularity (upper 19 bits only) */
page = eapaddr >> PAGE_SHIFT;
- if (info->eapr & BIT(0)) { /* CE? */
+ if (info->eapr & BIT(0)) { /* CE? */
error_found = 1;
if (handle_errors)
- edac_mc_handle_ce(mci, page, 0, /* not avail */
- syndrome,
- edac_mc_find_csrow_by_page(mci, page),
- 0, /* channel */
- mci->ctl_name);
+ edac_mc_handle_ce(mci, page, 0, /* not avail */
+ syndrome, edac_mc_find_csrow_by_page(mci, page), 0, /* channel */
+ mci->ctl_name);
}
- if (info->eapr & BIT(1)) { /* UE? */
+ if (info->eapr & BIT(1)) { /* UE? */
error_found = 1;
if (handle_errors)
/* 82600 doesn't give enough info */
edac_mc_handle_ue(mci, page, 0,
- edac_mc_find_csrow_by_page(mci, page),
- mci->ctl_name);
+ edac_mc_find_csrow_by_page(mci, page),
+ mci->ctl_name);
}
return error_found;
@@ -211,11 +210,11 @@
}
static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
- u8 dramcr)
+ u8 dramcr)
{
struct csrow_info *csrow;
int index;
- u8 drbar; /* SDRAM Row Boundry Address Register */
+ u8 drbar; /* SDRAM Row Boundry Address Register */
u32 row_high_limit, row_high_limit_last;
u32 reg_sdram, ecc_on, row_base;
@@ -309,12 +308,12 @@
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
r82600_init_csrows(mci, pdev, dramcr);
- r82600_get_error_info(mci, &discard); /* clear counters */
+ r82600_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
* type of memory controller. The ID is therefore hardcoded to 0.
*/
- if (edac_mc_add_mc(mci,0)) {
+ if (edac_mc_add_mc(mci, 0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
@@ -330,14 +329,14 @@
debugf3("%s(): success\n", __func__);
return 0;
-fail:
+ fail:
edac_mc_free(mci);
return -ENODEV;
}
/* returns count (>= 0), or negative on error */
static int __devinit r82600_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+ const struct pci_device_id *ent)
{
debugf0("%s()\n", __func__);
@@ -359,11 +358,11 @@
static const struct pci_device_id r82600_pci_tbl[] __devinitdata = {
{
- PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
- },
+ PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
+ },
{
- 0,
- } /* 0 terminated list. */
+ 0,
+ } /* 0 terminated list. */
};
MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
@@ -390,7 +389,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. "
- "on behalf of EADS Astrium");
+ "on behalf of EADS Astrium");
MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers");
module_param(disable_hardware_scrub, bool, 0644);