[MTD] Add support for NDFC NAND controller
NDFC NAND Flash controller is embedded in PPC EP44x SoCs.
Add platform driver based support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 0000000..31d61f0
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,66 @@
+/*
+ * linux/include/linux/mtd/ndfc.h
+ *
+ * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD 0x00
+#define NDFC_ALE 0x04
+#define NDFC_DATA 0x08
+#define NDFC_ECC 0x10
+#define NDFC_BCFG0 0x30
+#define NDFC_BCFG1 0x34
+#define NDFC_BCFG2 0x38
+#define NDFC_BCFG3 0x3c
+#define NDFC_CCR 0x40
+#define NDFC_STAT 0x44
+#define NDFC_HWCTL 0x48
+#define NDFC_REVID 0x50
+
+#define NDFC_STAT_IS_READY 0x01000000
+
+#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS 4
+
+struct ndfc_controller_settings {
+ uint32_t ccr_settings;
+};
+
+struct ndfc_chip_settings {
+ uint32_t bank_settings;
+};
+
+#endif