[ARM] 4350/1: AT91: Hardware header for ADC peripheral
Definitions for Analog-to-Digital Converter (ADC) found on the Atmel
AT91SAM9260 processor.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h
new file mode 100644
index 0000000..1ed66ea
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-arm/arch-at91/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#endif