hwmon: Fix unchecked return status, SMSC chips
hwmon: Fix unchecked return status, SMSC chips
Fix up 2 more hwmon drivers so that they no longer ignore return
status from device_create_file().
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index bdc4570..a6833f4 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -30,6 +30,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/sysfs.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
@@ -370,6 +371,75 @@
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 0x0400);
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 0x0800);
+static struct attribute *smsc47m192_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_offset.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_input_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_input_fault.dev_attr.attr,
+
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ NULL
+};
+
+static const struct attribute_group smsc47m192_group = {
+ .attrs = smsc47m192_attributes,
+};
+
+static struct attribute *smsc47m192_attributes_in4[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group smsc47m192_group_in4 = {
+ .attrs = smsc47m192_attributes_in4,
+};
+
/* This function is called when:
* smsc47m192_driver is inserted (when this module is loaded), for each
available adapter
@@ -471,80 +541,28 @@
smsc47m192_init_client(client);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group)))
goto exit_detach;
- }
-
- device_create_file(&client->dev, &sensor_dev_attr_in0_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in0_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in0_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in0_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in1_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in1_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in1_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in1_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in2_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in2_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in2_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in2_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in3_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in3_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in3_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in3_alarm.dev_attr);
/* Pin 110 is either in4 (+12V) or VID4 */
config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG);
if (!(config & 0x20)) {
- device_create_file(&client->dev,
- &sensor_dev_attr_in4_input.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_in4_min.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_in4_max.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_in4_alarm.dev_attr);
+ if ((err = sysfs_create_group(&client->dev.kobj,
+ &smsc47m192_group_in4)))
+ goto exit_remove_files;
}
- device_create_file(&client->dev, &sensor_dev_attr_in5_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in5_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in5_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in5_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in6_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in6_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in6_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in6_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in7_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in7_min.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in7_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_in7_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp1_min.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_temp1_offset.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp1_alarm.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp2_min.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_temp2_offset.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp2_alarm.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_temp2_input_fault.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp3_min.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_temp3_offset.dev_attr);
- device_create_file(&client->dev, &sensor_dev_attr_temp3_alarm.dev_attr);
- device_create_file(&client->dev,
- &sensor_dev_attr_temp3_input_fault.dev_attr);
- device_create_file(&client->dev, &dev_attr_cpu0_vid);
- device_create_file(&client->dev, &dev_attr_vrm);
+
+ data->class_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove_files;
+ }
return 0;
+exit_remove_files:
+ sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
+ sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
exit_detach:
i2c_detach_client(client);
exit_free:
@@ -559,6 +577,8 @@
int err;
hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&client->dev.kobj, &smsc47m192_group);
+ sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4);
if ((err = i2c_detach_client(client)))
return err;