Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: use MII hooks only if CONFIG_MII is enabled
USB Storage: unusual_devs.h entry for Sony Ericsson P990i
USB: xpad: additional USB id's added
USB: fix compiler issues with newer gcc versions
USB: HID: add blacklist AIRcable USB, little beautification
USB: usblp: fix system suspend for some systems
USB: failure in usblp's error path
usbtouchscreen: use endpoint address from endpoint descriptor
USB: sierra: Fix id for Sierra Wireless MC8755 in new table
USB: new VID/PID-combos for cp2101
hid-core: big-endian fix fix
USB: usb-storage: Unusual_dev update
USB: add another sierra wireless device id
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 8dc2bac..50436e1 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -428,12 +428,6 @@
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
-AIRcable USB Dongle Bluetooth driver
- If there is the cdc_acm driver loaded in the system, you will find that the
- cdc_acm claims the device before AIRcable can. This is simply corrected
- by unloading both modules and then loading the aircable module before
- cdc_acm module
-
Generic Serial driver
If your device is not one of the above listed devices, compatible with
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 809d465..6303970 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -722,6 +722,7 @@
usblp->wcomplete = 0;
err = usb_submit_urb(usblp->writeurb, GFP_KERNEL);
if (err) {
+ usblp->wcomplete = 1;
if (err != -ENOMEM)
count = -EIO;
else
@@ -1202,8 +1203,6 @@
down (&usblp->sem);
/* we take no more IO */
usblp->sleeping = 1;
- /* we wait for anything printing */
- wait_event (usblp->wait, usblp->wcomplete || !usblp->present);
usblp_unlink_urbs(usblp);
up (&usblp->sem);
mutex_unlock (&usblp_mutex);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 66bff18..ba165af 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1188,6 +1188,7 @@
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
+static int __usb_port_suspend(struct usb_device *, int port1);
#endif
/**
@@ -1289,8 +1290,6 @@
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_port_suspend(struct usb_device *,
- int port1);
err = __usb_port_suspend(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 45f44fe..6daf85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -270,7 +270,7 @@
* Read data value from item.
*/
-static __inline__ __u32 item_udata(struct hid_item *item)
+static u32 item_udata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.u8;
@@ -280,7 +280,7 @@
return 0;
}
-static __inline__ __s32 item_sdata(struct hid_item *item)
+static s32 item_sdata(struct hid_item *item)
{
switch (item->size) {
case 1: return item->data.s8;
@@ -727,7 +727,7 @@
* done by hand.
*/
-static __inline__ __s32 snto32(__u32 value, unsigned n)
+static s32 snto32(__u32 value, unsigned n)
{
switch (n) {
case 8: return ((__s8)value);
@@ -741,9 +741,9 @@
* Convert a signed 32-bit integer to a signed n-bit integer.
*/
-static __inline__ __u32 s32ton(__s32 value, unsigned n)
+static u32 s32ton(__s32 value, unsigned n)
{
- __s32 a = value >> (n - 1);
+ s32 a = value >> (n - 1);
if (a && a != -1)
return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
return value & ((1 << n) - 1);
@@ -751,30 +751,55 @@
/*
* Extract/implement a data field from/to a little endian report (bit array).
+ *
+ * Code sort-of follows HID spec:
+ * http://www.usb.org/developers/devclass_docs/HID1_11.pdf
+ *
+ * While the USB HID spec allows unlimited length bit fields in "report
+ * descriptors", most devices never use more than 16 bits.
+ * One model of UPS is claimed to report "LINEV" as a 32-bit field.
+ * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
*/
static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
{
- u32 x;
+ u64 x;
+
+ WARN_ON(n > 32);
report += offset >> 3; /* adjust byte index */
- offset &= 8 - 1;
- x = get_unaligned((u32 *) report);
- x = le32_to_cpu(x);
- x = (x >> offset) & ((1 << n) - 1);
- return x;
+ offset &= 7; /* now only need bit offset into one byte */
+ x = get_unaligned((u64 *) report);
+ x = le64_to_cpu(x);
+ x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */
+ return (u32) x;
}
+/*
+ * "implement" : set bits in a little endian bit stream.
+ * Same concepts as "extract" (see comments above).
+ * The data mangled in the bit stream remains in little endian
+ * order the whole time. It make more sense to talk about
+ * endianness of register values by considering a register
+ * a "cached" copy of the little endiad bit stream.
+ */
static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
{
- u32 x;
+ u64 x;
+ u64 m = (1ULL << n) - 1;
+
+ WARN_ON(n > 32);
+
+ WARN_ON(value > m);
+ value &= m;
report += offset >> 3;
- offset &= 8 - 1;
- x = get_unaligned((u32 *)report);
- x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset));
- x |= cpu_to_le32(value << offset);
- put_unaligned(x,(u32 *)report);
+ offset &= 7;
+
+ x = get_unaligned((u64 *)report);
+ x &= cpu_to_le64(~(m << offset));
+ x |= cpu_to_le64(((u64) value) << offset);
+ put_unaligned(x, (u64 *) report);
}
/*
@@ -1615,6 +1640,9 @@
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
+#define USB_VENDOR_ID_AIRCABLE 0x16CA
+#define USB_DEVICE_ID_AIRCABLE1 0x1502
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1632,6 +1660,7 @@
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 2902742..933cedd 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -640,7 +640,7 @@
type->max_press, 0, 0);
usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, 0x81),
+ usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index 6a12a94..df97e5c 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -2,6 +2,10 @@
* X-Box gamepad - v0.0.6
*
* Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
+ * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ * Steven Toth <steve@toth.demon.co.uk>,
+ * Franz Lehner <franz@caos.at>,
+ * Ivan Hawkes <blackhawk@ivanhawkes.com>
* 2005 Dominic Cerquetti <binary1230@yahoo.com>
* 2006 Adam Buchbinder <adam.buchbinder@gmail.com>
*
@@ -29,6 +33,7 @@
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
+ * - XBOX Linux project - extra USB id's
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -54,6 +59,13 @@
* - fixed d-pad to axes mapping
*
* 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ * - borrowed from the XBOX linux kernel
+ * - USB id's for commonly used dance pads are present
+ * - dance pads will map D-PAD to buttons, not axes
+ * - pass the module paramater 'dpad_to_buttons' to force
+ * the D-PAD to map to buttons if your pad is not detected
*/
#include <linux/kernel.h>
@@ -90,8 +102,35 @@
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+ { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
};
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 454a186..e081836 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -92,8 +92,13 @@
To compile this driver as a module, choose M here: the
module will be called rtl8150.
+config USB_USBNET_MII
+ tristate
+ default n
+
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
+ select MII if USBNET_MII != n
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -129,7 +134,7 @@
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
- select MII
+ select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -210,6 +215,7 @@
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
depends on USB_USBNET
+ select USB_USBNET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 4087363..760b532 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -669,6 +669,9 @@
* they'll probably want to use this base set.
*/
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -699,20 +702,6 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_settings);
-
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
-{
- struct usbnet *dev = netdev_priv(net);
-
- /* REVISIT don't always return "usbnet" */
- strncpy (info->driver, driver_name, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- strncpy (info->fw_version, dev->driver_info->description,
- sizeof info->fw_version);
- usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
-
u32 usbnet_get_link (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -730,6 +719,32 @@
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
+int usbnet_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+#endif /* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ /* REVISIT don't always return "usbnet" */
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strncpy (info->fw_version, dev->driver_info->description,
+ sizeof info->fw_version);
+ usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+
u32 usbnet_get_msglevel (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -746,24 +761,15 @@
}
EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-int usbnet_nway_reset(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
-
- if (!dev->mii.mdio_write)
- return -EOPNOTSUPP;
-
- return mii_nway_restart(&dev->mii);
-}
-EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
+#ifdef HAVE_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
- .get_drvinfo = usbnet_get_drvinfo,
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
+#endif
+ .get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
};
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9a6ec1b..2a8dd4c 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -54,10 +54,10 @@
properly.
config USB_SERIAL_AIRCABLE
- tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
+ tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
help
- Say Y here if you want to use AIRcable USB Bluetoot Dongle.
+ Say Y here if you want to use USB AIRcable Bluetooth Dongle.
To compile this driver as a module, choose M here: the module
will be called aircable.
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index bbf6532..f95d42c 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -64,6 +64,9 @@
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea16572..4b5097f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -35,6 +35,7 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
@@ -58,8 +59,10 @@
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 37ed8e0..bc1ac07 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1236,7 +1236,7 @@
"Cowon Systems",
"iAUDIO M5",
US_SC_DEVICE, US_PR_BULK, NULL,
- 0 ),
+ US_FL_NEED_OVERRIDE ),
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
@@ -1313,6 +1313,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P990i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.