| /* |
| * INET An implementation of the TCP/IP protocol suite for the LINUX |
| * operating system. INET is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * Global definitions for the Ethernet IEEE 802.3 interface. |
| * |
| * Version: @(#)if_ether.h 1.0.1a 02/08/94 |
| * |
| * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * Donald Becker, <becker@super.org> |
| * Alan Cox, <alan@redhat.com> |
| * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #ifndef _LINUX_IF_ETHER_H |
| #define _LINUX_IF_ETHER_H |
| |
| #include <linux/types.h> |
| |
| /* |
| * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble |
| * and FCS/CRC (frame check sequence). |
| */ |
| |
| #define ETH_ALEN 6 /* Octets in one ethernet addr */ |
| #define ETH_HLEN 14 /* Total octets in header. */ |
| #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ |
| #define ETH_DATA_LEN 1500 /* Max. octets in payload */ |
| #define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ |
| |
| /* |
| * These are the defined Ethernet Protocol ID's. |
| */ |
| |
| #define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ |
| #define ETH_P_PUP 0x0200 /* Xerox PUP packet */ |
| #define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ |
| #define ETH_P_IP 0x0800 /* Internet Protocol packet */ |
| #define ETH_P_X25 0x0805 /* CCITT X.25 */ |
| #define ETH_P_ARP 0x0806 /* Address Resolution packet */ |
| #define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ |
| #define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ |
| #define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ |
| #define ETH_P_DEC 0x6000 /* DEC Assigned proto */ |
| #define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ |
| #define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ |
| #define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ |
| #define ETH_P_LAT 0x6004 /* DEC LAT */ |
| #define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ |
| #define ETH_P_CUST 0x6006 /* DEC Customer use */ |
| #define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ |
| #define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ |
| #define ETH_P_ATALK 0x809B /* Appletalk DDP */ |
| #define ETH_P_AARP 0x80F3 /* Appletalk AARP */ |
| #define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ |
| #define ETH_P_IPX 0x8137 /* IPX over DIX */ |
| #define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ |
| #define ETH_P_WCCP 0x883E /* Web-cache coordination protocol |
| * defined in draft-wilson-wrec-wccp-v2-00.txt */ |
| #define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ |
| #define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ |
| #define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ |
| #define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ |
| #define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ |
| #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport |
| * over Ethernet |
| */ |
| #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ |
| |
| /* |
| * Non DIX types. Won't clash for 1500 types. |
| */ |
| |
| #define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ |
| #define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ |
| #define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ |
| #define ETH_P_802_2 0x0004 /* 802.2 frames */ |
| #define ETH_P_SNAP 0x0005 /* Internal only */ |
| #define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ |
| #define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ |
| #define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ |
| #define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ |
| #define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ |
| #define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ |
| #define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ |
| #define ETH_P_CONTROL 0x0016 /* Card specific control frames */ |
| #define ETH_P_IRDA 0x0017 /* Linux-IrDA */ |
| #define ETH_P_ECONET 0x0018 /* Acorn Econet */ |
| #define ETH_P_HDLC 0x0019 /* HDLC frames */ |
| #define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ |
| |
| /* |
| * This is an Ethernet frame header. |
| */ |
| |
| struct ethhdr { |
| unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ |
| unsigned char h_source[ETH_ALEN]; /* source ether addr */ |
| __be16 h_proto; /* packet type ID field */ |
| } __attribute__((packed)); |
| |
| #ifdef __KERNEL__ |
| #include <linux/skbuff.h> |
| |
| static inline struct ethhdr *eth_hdr(const struct sk_buff *skb) |
| { |
| return (struct ethhdr *)skb->mac.raw; |
| } |
| |
| #ifdef CONFIG_SYSCTL |
| extern struct ctl_table ether_table[]; |
| #endif |
| #endif |
| |
| #endif /* _LINUX_IF_ETHER_H */ |