Char: ip2, macros cleanup
- remove i2os.h -- there was only macro to macro renaming or useless
stuff
- remove another uselless stuf (NULLFUNC, NULLPTR, YES, NO)
- use outb/inb directly
- use locking functions directly
- don't define another ROUNDUP, use roundup(x, 2) instead
- some comments and whitespace cleanup
- remove some commented crap
- prepend the rest by I2 prefix to not collide with rest of the world
like in following output (pointed out by akpm)
In file included from drivers/char/ip2/ip2main.c:128:
drivers/char/ip2/i2ellis.h:608:1: warning: "COMPLETE" redefined
In file included from include/net/netns/ipv4.h:8,
from include/net/net_namespace.h:13,
from include/linux/seq_file.h:7,
from include/asm/machdep.h:12,
from include/asm/pci.h:17,
from include/linux/pci.h:951,
from drivers/char/ip2/ip2main.c:95:
include/net/inet_frag.h:28:1: warning: this is the location of the previous definition
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
index 61ef013..3601017 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/char/ip2/i2ellis.c
@@ -53,7 +53,7 @@
static int iiDelayed; // Set when the iiResetDelay function is
// called. Cleared when ANY board is reset.
-static rwlock_t Dl_spinlock;
+static DEFINE_RWLOCK(Dl_spinlock);
//********
//* Code *
@@ -82,7 +82,6 @@
static void
iiEllisInit(void)
{
- LOCK_INIT(&Dl_spinlock);
}
//******************************************************************************
@@ -132,7 +131,7 @@
|| (address & 0x7)
)
{
- COMPLETE(pB,I2EE_BADADDR);
+ I2_COMPLETE(pB, I2EE_BADADDR);
}
// Initialize accelerators
@@ -152,7 +151,7 @@
pB->i2eValid = I2E_MAGIC;
pB->i2eState = II_STATE_COLD;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -177,12 +176,12 @@
// Magic number should be set, else even the address is suspect
if (pB->i2eValid != I2E_MAGIC)
{
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
- OUTB(pB->i2eBase + FIFO_RESET, 0); // Any data will do
+ outb(0, pB->i2eBase + FIFO_RESET); /* Any data will do */
iiDelay(pB, 50); // Pause between resets
- OUTB(pB->i2eBase + FIFO_RESET, 0); // Second reset
+ outb(0, pB->i2eBase + FIFO_RESET); /* Second reset */
// We must wait before even attempting to read anything from the FIFO: the
// board's P.O.S.T may actually attempt to read and write its end of the
@@ -203,7 +202,7 @@
// Ensure anything which would have been of use to standard loadware is
// blanked out, since board has now forgotten everything!.
- pB->i2eUsingIrq = IRQ_UNDEFINED; // Not set up to use an interrupt yet
+ pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */
pB->i2eWaitingForEmptyFifo = 0;
pB->i2eOutMailWaiting = 0;
pB->i2eChannelPtr = NULL;
@@ -215,7 +214,7 @@
pB->i2eFatalTrap = NULL;
pB->i2eFatal = 0;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -235,14 +234,14 @@
iiResetDelay(i2eBordStrPtr pB)
{
if (pB->i2eValid != I2E_MAGIC) {
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_RESET) {
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
iiDelay(pB,2000); /* Now we wait for two seconds. */
iiDelayed = 1; /* Delay has been called: ok to initialize */
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -273,12 +272,12 @@
if (pB->i2eValid != I2E_MAGIC)
{
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_RESET || !iiDelayed)
{
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
// In case there is a failure short of our completely reading the power-up
@@ -291,13 +290,12 @@
for (itemp = 0; itemp < sizeof(porStr); itemp++)
{
// We expect the entire message is ready.
- if (HAS_NO_INPUT(pB))
- {
+ if (!I2_HAS_INPUT(pB)) {
pB->i2ePomSize = itemp;
- COMPLETE(pB, I2EE_PORM_SHORT);
+ I2_COMPLETE(pB, I2EE_PORM_SHORT);
}
- pB->i2ePom.c[itemp] = c = BYTE_FROM(pB);
+ pB->i2ePom.c[itemp] = c = inb(pB->i2eData);
// We check the magic numbers as soon as they are supposed to be read
// (rather than after) to minimize effect of reading something we
@@ -306,22 +304,22 @@
(itemp == POR_2_INDEX && c != POR_MAGIC_2))
{
pB->i2ePomSize = itemp+1;
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
}
pB->i2ePomSize = itemp;
// Ensure that this was all the data...
- if (HAS_INPUT(pB))
- COMPLETE(pB, I2EE_PORM_LONG);
+ if (I2_HAS_INPUT(pB))
+ I2_COMPLETE(pB, I2EE_PORM_LONG);
// For now, we'll fail to initialize if P.O.S.T reports bad chip mapper:
// Implying we will not be able to download any code either: That's ok: the
// condition is pretty explicit.
if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER)
{
- COMPLETE(pB, I2EE_POSTERR);
+ I2_COMPLETE(pB, I2EE_POSTERR);
}
// Determine anything which must be done differently depending on the family
@@ -332,7 +330,7 @@
pB->i2eFifoStyle = FIFO_II;
pB->i2eFifoSize = 512; // 512 bytes, always
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 15; // Because board cannot tell us it is in an 8-bit
// slot, we do allow it to be done (documentation!)
@@ -354,7 +352,7 @@
// should always be consistent for IntelliPort-II. Ditto below...
if (pB->i2ePom.e.porPorts1 != 4)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
@@ -364,7 +362,7 @@
pB->i2eChannelMap[0] = 0xff; // Eight port
if (pB->i2ePom.e.porPorts1 != 8)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
@@ -373,7 +371,7 @@
pB->i2eChannelMap[0] = 0x3f; // Six Port
if (pB->i2ePom.e.porPorts1 != 6)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
break;
}
@@ -402,7 +400,7 @@
if (itemp < 8 || itemp > 15)
{
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
pB->i2eFifoSize = (1 << itemp);
@@ -450,26 +448,26 @@
switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) )
{
case POR_BUS_SLOT16 | POR_BUS_DIP16:
- pB->i2eDataWidth16 = YES;
+ pB->i2eDataWidth16 = true;
pB->i2eMaxIrq = 15;
break;
case POR_BUS_SLOT16:
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 15;
break;
case 0:
case POR_BUS_DIP16: // In an 8-bit slot, DIP switch don't care.
default:
- pB->i2eDataWidth16 = NO;
+ pB->i2eDataWidth16 = false;
pB->i2eMaxIrq = 7;
break;
}
break; // POR_ID_FIIEX case
default: // Unknown type of board
- COMPLETE(pB, I2EE_BAD_FAMILY);
+ I2_COMPLETE(pB, I2EE_BAD_FAMILY);
break;
} // End the switch based on family
@@ -483,17 +481,14 @@
{
case POR_BUS_T_ISA:
case POR_BUS_T_UNK: // If the type of bus is undeclared, assume ok.
- pB->i2eChangeIrq = YES;
- break;
case POR_BUS_T_MCA:
case POR_BUS_T_EISA:
- pB->i2eChangeIrq = NO;
break;
default:
- COMPLETE(pB, I2EE_BADBUS);
+ I2_COMPLETE(pB, I2EE_BADBUS);
}
- if (pB->i2eDataWidth16 == YES)
+ if (pB->i2eDataWidth16)
{
pB->i2eWriteBuf = iiWriteBuf16;
pB->i2eReadBuf = iiReadBuf16;
@@ -529,7 +524,7 @@
break;
default:
- COMPLETE(pB, I2EE_INCONSIST);
+ I2_COMPLETE(pB, I2EE_INCONSIST);
}
// Initialize state information.
@@ -549,7 +544,7 @@
// Everything is ok now, return with good status/
pB->i2eValid = I2E_MAGIC;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -658,7 +653,7 @@
while(mseconds--) {
int i = ii2DelValue;
while ( i-- ) {
- INB ( ii2Safe );
+ inb(ii2Safe);
}
}
}
@@ -709,11 +704,11 @@
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- OUTSW ( pB->i2eData, address, count);
+ I2_OUTSW(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -738,11 +733,11 @@
{
/* Rudimentary sanity checking here */
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- OUTSB ( pB->i2eData, address, count );
+ I2_OUTSB(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -767,11 +762,11 @@
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- INSW ( pB->i2eData, address, count);
+ I2_INSW(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -796,11 +791,11 @@
{
// Rudimentary sanity checking here.
if (pB->i2eValid != I2E_MAGIC)
- COMPLETE(pB, I2EE_INVALID);
+ I2_COMPLETE(pB, I2EE_INVALID);
- INSB ( pB->i2eData, address, count);
+ I2_INSB(pB->i2eData, address, count);
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
//******************************************************************************
@@ -820,7 +815,7 @@
static unsigned short
iiReadWord16(i2eBordStrPtr pB)
{
- return (unsigned short)( INW(pB->i2eData) );
+ return inw(pB->i2eData);
}
//******************************************************************************
@@ -842,9 +837,9 @@
{
unsigned short urs;
- urs = INB ( pB->i2eData );
+ urs = inb(pB->i2eData);
- return ( ( INB ( pB->i2eData ) << 8 ) | urs );
+ return (inb(pB->i2eData) << 8) | urs;
}
//******************************************************************************
@@ -865,7 +860,7 @@
static void
iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
{
- WORD_TO(pB, (int)value);
+ outw((int)value, pB->i2eData);
}
//******************************************************************************
@@ -886,8 +881,8 @@
static void
iiWriteWord8(i2eBordStrPtr pB, unsigned short value)
{
- BYTE_TO(pB, (char)value);
- BYTE_TO(pB, (char)(value >> 8) );
+ outb((char)value, pB->i2eData);
+ outb((char)(value >> 8), pB->i2eData);
}
//******************************************************************************
@@ -939,30 +934,30 @@
// interrupts of any kind.
- WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
- OUTB(pB->i2ePointer, SEL_COMMAND);
- OUTB(pB->i2ePointer, SEL_CMD_SH);
+ write_lock_irqsave(&Dl_spinlock, flags);
+ outb(SEL_COMMAND, pB->i2ePointer);
+ outb(SEL_CMD_SH, pB->i2ePointer);
- itemp = INB(pB->i2eStatus);
+ itemp = inb(pB->i2eStatus);
- OUTB(pB->i2ePointer, SEL_COMMAND);
- OUTB(pB->i2ePointer, SEL_CMD_UNSH);
+ outb(SEL_COMMAND, pB->i2ePointer);
+ outb(SEL_CMD_UNSH, pB->i2ePointer);
if (itemp & ST_IN_EMPTY)
{
- UPDATE_FIFO_ROOM(pB);
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
- COMPLETE(pB, I2EE_GOOD);
+ I2_UPDATE_FIFO_ROOM(pB);
+ write_unlock_irqrestore(&Dl_spinlock, flags);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+ write_unlock_irqrestore(&Dl_spinlock, flags);
if (mSdelay-- == 0)
break;
iiDelay(pB, 1); /* 1 mS granularity on checking condition */
}
- COMPLETE(pB, I2EE_TXE_TIME);
+ I2_COMPLETE(pB, I2EE_TXE_TIME);
}
//******************************************************************************
@@ -1002,21 +997,21 @@
// you will generally not want to service interrupts or in any way
// disrupt the assumptions implicit in the larger context.
- WRITE_LOCK_IRQSAVE(&Dl_spinlock,flags)
+ write_lock_irqsave(&Dl_spinlock, flags);
- if (INB(pB->i2eStatus) & STE_OUT_MT) {
- UPDATE_FIFO_ROOM(pB);
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
- COMPLETE(pB, I2EE_GOOD);
+ if (inb(pB->i2eStatus) & STE_OUT_MT) {
+ I2_UPDATE_FIFO_ROOM(pB);
+ write_unlock_irqrestore(&Dl_spinlock, flags);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
- WRITE_UNLOCK_IRQRESTORE(&Dl_spinlock,flags)
+ write_unlock_irqrestore(&Dl_spinlock, flags);
if (mSdelay-- == 0)
break;
iiDelay(pB, 1); // 1 mS granularity on checking condition
}
- COMPLETE(pB, I2EE_TXE_TIME);
+ I2_COMPLETE(pB, I2EE_TXE_TIME);
}
//******************************************************************************
@@ -1038,8 +1033,8 @@
iiTxMailEmptyII(i2eBordStrPtr pB)
{
int port = pB->i2ePointer;
- OUTB ( port, SEL_OUTMAIL );
- return ( INB(port) == 0 );
+ outb(SEL_OUTMAIL, port);
+ return inb(port) == 0;
}
//******************************************************************************
@@ -1060,7 +1055,7 @@
static int
iiTxMailEmptyIIEX(i2eBordStrPtr pB)
{
- return !(INB(pB->i2eStatus) & STE_OUT_MAIL);
+ return !(inb(pB->i2eStatus) & STE_OUT_MAIL);
}
//******************************************************************************
@@ -1084,10 +1079,10 @@
{
int port = pB->i2ePointer;
- OUTB(port, SEL_OUTMAIL);
- if (INB(port) == 0) {
- OUTB(port, SEL_OUTMAIL);
- OUTB(port, mail);
+ outb(SEL_OUTMAIL, port);
+ if (inb(port) == 0) {
+ outb(SEL_OUTMAIL, port);
+ outb(mail, port);
return 1;
}
return 0;
@@ -1112,10 +1107,9 @@
static int
iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
{
- if(INB(pB->i2eStatus) & STE_OUT_MAIL) {
+ if (inb(pB->i2eStatus) & STE_OUT_MAIL)
return 0;
- }
- OUTB(pB->i2eXMail, mail);
+ outb(mail, pB->i2eXMail);
return 1;
}
@@ -1136,9 +1130,9 @@
static unsigned short
iiGetMailII(i2eBordStrPtr pB)
{
- if (HAS_MAIL(pB)) {
- OUTB(pB->i2ePointer, SEL_INMAIL);
- return INB(pB->i2ePointer);
+ if (I2_HAS_MAIL(pB)) {
+ outb(SEL_INMAIL, pB->i2ePointer);
+ return inb(pB->i2ePointer);
} else {
return NO_MAIL_HERE;
}
@@ -1161,11 +1155,10 @@
static unsigned short
iiGetMailIIEX(i2eBordStrPtr pB)
{
- if (HAS_MAIL(pB)) {
- return INB(pB->i2eXMail);
- } else {
+ if (I2_HAS_MAIL(pB))
+ return inb(pB->i2eXMail);
+ else
return NO_MAIL_HERE;
- }
}
//******************************************************************************
@@ -1184,8 +1177,8 @@
static void
iiEnableMailIrqII(i2eBordStrPtr pB)
{
- OUTB(pB->i2ePointer, SEL_MASK);
- OUTB(pB->i2ePointer, ST_IN_MAIL);
+ outb(SEL_MASK, pB->i2ePointer);
+ outb(ST_IN_MAIL, pB->i2ePointer);
}
//******************************************************************************
@@ -1204,7 +1197,7 @@
static void
iiEnableMailIrqIIEX(i2eBordStrPtr pB)
{
- OUTB(pB->i2eXMask, MX_IN_MAIL);
+ outb(MX_IN_MAIL, pB->i2eXMask);
}
//******************************************************************************
@@ -1223,8 +1216,8 @@
static void
iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
{
- OUTB(pB->i2ePointer, SEL_MASK);
- OUTB(pB->i2ePointer, value);
+ outb(SEL_MASK, pB->i2ePointer);
+ outb(value, pB->i2ePointer);
}
//******************************************************************************
@@ -1243,7 +1236,7 @@
static void
iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value)
{
- OUTB(pB->i2eXMask, value);
+ outb(value, pB->i2eXMask);
}
//******************************************************************************
@@ -1354,9 +1347,8 @@
// immediately and be harmless, though not strictly necessary.
itemp = MAX_DLOAD_ACK_TIME/10;
while (--itemp) {
- if (HAS_INPUT(pB)) {
- switch(BYTE_FROM(pB))
- {
+ if (I2_HAS_INPUT(pB)) {
+ switch (inb(pB->i2eData)) {
case LOADWARE_OK:
pB->i2eState =
isStandard ? II_STATE_STDLOADED :II_STATE_LOADED;
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
index 4333050..c88a64e 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/char/ip2/i2ellis.h
@@ -185,10 +185,6 @@
// The highest allowable IRQ, based on the
// slot size.
- unsigned char i2eChangeIrq;
- // Whether tis valid to change IRQ's
- // ISA = ok, EISA, MicroChannel, no
-
// Accelerators for various addresses on the board
int i2eBase; // I/O Address of the Board
int i2eData; // From here data transfers happen
@@ -431,12 +427,6 @@
// Manifests for i2eBordStr:
//-------------------------------------------
-#define YES 1
-#define NO 0
-
-#define NULLFUNC (void (*)(void))0
-#define NULLPTR (void *)0
-
typedef void (*delayFunc_t)(unsigned int);
// i2eValid
@@ -494,8 +484,8 @@
// i2eUsingIrq
//
-#define IRQ_UNDEFINED 0x1352 // No valid irq (or polling = 0) can ever
- // promote to this!
+#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can
+ * ever promote to this! */
//------------------------------------------
// Handy Macros for i2ellis.c and others
// Note these are common to -II and -IIEX
@@ -504,41 +494,14 @@
// Given a pointer to the board structure, does the input FIFO have any data or
// not?
//
-#define HAS_INPUT(pB) !(INB(pB->i2eStatus) & ST_IN_EMPTY)
-#define HAS_NO_INPUT(pB) (INB(pB->i2eStatus) & ST_IN_EMPTY)
-
-// Given a pointer to board structure, read a byte or word from the fifo
-//
-#define BYTE_FROM(pB) (unsigned char)INB(pB->i2eData)
-#define WORD_FROM(pB) (unsigned short)INW(pB->i2eData)
-
-// Given a pointer to board structure, is there room for any data to be written
-// to the data fifo?
-//
-#define HAS_OUTROOM(pB) !(INB(pB->i2eStatus) & ST_OUT_FULL)
-#define HAS_NO_OUTROOM(pB) (INB(pB->i2eStatus) & ST_OUT_FULL)
-
-// Given a pointer to board structure, write a single byte to the fifo
-// structure. Note that for 16-bit interfaces, the high order byte is undefined
-// and unknown.
-//
-#define BYTE_TO(pB, c) OUTB(pB->i2eData,(c))
-
-// Write a word to the fifo structure. For 8-bit interfaces, this may have
-// unknown results.
-//
-#define WORD_TO(pB, c) OUTW(pB->i2eData,(c))
+#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY)
// Given a pointer to the board structure, is there anything in the incoming
// mailbox?
//
-#define HAS_MAIL(pB) (INB(pB->i2eStatus) & ST_IN_MAIL)
+#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL)
-#define UPDATE_FIFO_ROOM(pB) (pB)->i2eFifoRemains=(pB)->i2eFifoSize
-
-// Handy macro to round up a number (like the buffer write and read routines do)
-//
-#define ROUNDUP(number) (((number)+1) & (~1))
+#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize)
//------------------------------------------
// Function Declarations for i2ellis.c
@@ -593,20 +556,11 @@
//
static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
-// Called indirectly always. Needed externally so the routine might be
-// SPECIFIED as an argument to iiReset()
-//
-//static void ii2DelayIO(unsigned int); // N-millisecond delay using
- //hardware spin
-//static void ii2DelayTimer(unsigned int); // N-millisecond delay using Linux
- //timer
-
// Many functions defined here return True if good, False otherwise, with an
// error code in i2eError field. Here is a handy macro for setting the error
// code and returning.
//
-#define COMPLETE(pB,code) \
- do { \
+#define I2_COMPLETE(pB,code) do { \
pB->i2eError = code; \
return (code == I2EE_GOOD);\
} while (0)
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 15fe04e..8aa6e7a 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -129,7 +129,6 @@
//------------------------------------------------
//
#include "ip2types.h"
-#include "i2os.h" /* For any o.s., compiler, or host-related issues */
//-------------------------------------------------------------------------
// Manifests for the I/O map:
@@ -644,5 +643,10 @@
#define ABS_BIGGEST_BOX 16 // Absolute the most ports per box
#define ABS_MOST_PORTS (ABS_MAX_BOXES * ABS_BIGGEST_BOX)
+#define I2_OUTSW(port, addr, count) outsw((port), (addr), (((count)+1)/2))
+#define I2_OUTSB(port, addr, count) outsb((port), (addr), (((count)+1))&-2)
+#define I2_INSW(port, addr, count) insw((port), (addr), (((count)+1)/2))
+#define I2_INSB(port, addr, count) insb((port), (addr), (((count)+1))&-2)
+
#endif // I2HW_H
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index 9c25320..938879c 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -227,17 +227,17 @@
i2ChanStrPtr *ppCh;
if (pB->i2eValid != I2E_MAGIC) {
- COMPLETE(pB, I2EE_BADMAGIC);
+ I2_COMPLETE(pB, I2EE_BADMAGIC);
}
if (pB->i2eState != II_STATE_STDLOADED) {
- COMPLETE(pB, I2EE_BADSTATE);
+ I2_COMPLETE(pB, I2EE_BADSTATE);
}
- LOCK_INIT(&pB->read_fifo_spinlock);
- LOCK_INIT(&pB->write_fifo_spinlock);
- LOCK_INIT(&pB->Dbuf_spinlock);
- LOCK_INIT(&pB->Bbuf_spinlock);
- LOCK_INIT(&pB->Fbuf_spinlock);
+ rwlock_init(&pB->read_fifo_spinlock);
+ rwlock_init(&pB->write_fifo_spinlock);
+ rwlock_init(&pB->Dbuf_spinlock);
+ rwlock_init(&pB->Bbuf_spinlock);
+ rwlock_init(&pB->Fbuf_spinlock);
// NO LOCK needed yet - this is init
@@ -259,10 +259,10 @@
if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
continue;
}
- LOCK_INIT(&pCh->Ibuf_spinlock);
- LOCK_INIT(&pCh->Obuf_spinlock);
- LOCK_INIT(&pCh->Cbuf_spinlock);
- LOCK_INIT(&pCh->Pbuf_spinlock);
+ rwlock_init(&pCh->Ibuf_spinlock);
+ rwlock_init(&pCh->Obuf_spinlock);
+ rwlock_init(&pCh->Cbuf_spinlock);
+ rwlock_init(&pCh->Pbuf_spinlock);
// NO LOCK needed yet - this is init
// Set up validity flag according to support level
if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
@@ -347,7 +347,7 @@
}
// No need to check for wrap here; this is initialization.
pB->i2Fbuf_stuff = stuffIndex;
- COMPLETE(pB, I2EE_GOOD);
+ I2_COMPLETE(pB, I2EE_GOOD);
}
@@ -374,7 +374,7 @@
case NEED_INLINE:
- WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Dbuf_spinlock, flags);
if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
{
queueIndex = pB->i2Dbuf_strip;
@@ -386,12 +386,12 @@
pB->i2Dbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_INLINE;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
break;
case NEED_BYPASS:
- WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Bbuf_spinlock, flags);
if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
{
queueIndex = pB->i2Bbuf_strip;
@@ -403,12 +403,12 @@
pB->i2Bbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_BYPASS;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
break;
case NEED_FLOW:
- WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Fbuf_spinlock, flags);
if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
{
queueIndex = pB->i2Fbuf_strip;
@@ -420,7 +420,7 @@
pB->i2Fbuf_strip = queueIndex;
pCh->channelNeeds &= ~NEED_FLOW;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
break;
default:
printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
@@ -453,7 +453,7 @@
case NEED_INLINE:
- WRITE_LOCK_IRQSAVE(&pB->Dbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Dbuf_spinlock, flags);
if ( !(pCh->channelNeeds & NEED_INLINE) )
{
pCh->channelNeeds |= NEED_INLINE;
@@ -463,12 +463,12 @@
queueIndex = 0;
pB->i2Dbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Dbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
break;
case NEED_BYPASS:
- WRITE_LOCK_IRQSAVE(&pB->Bbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Bbuf_spinlock, flags);
if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
{
pCh->channelNeeds |= NEED_BYPASS;
@@ -478,12 +478,12 @@
queueIndex = 0;
pB->i2Bbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Bbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
break;
case NEED_FLOW:
- WRITE_LOCK_IRQSAVE(&pB->Fbuf_spinlock,flags);
+ write_lock_irqsave(&pB->Fbuf_spinlock, flags);
if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
{
pCh->channelNeeds |= NEED_FLOW;
@@ -493,7 +493,7 @@
queueIndex = 0;
pB->i2Fbuf_stuff = queueIndex;
}
- WRITE_UNLOCK_IRQRESTORE(&pB->Fbuf_spinlock,flags);
+ write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
break;
case NEED_CREDIT:
@@ -562,9 +562,8 @@
pB = pCh->pMyBord;
// Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
- if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == IRQ_UNDEFINED) {
+ if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED)
return -2;
- }
// If the board has gone fatal, return bad, and also hit the trap routine if
// it exists.
if (pB->i2eFatal) {
@@ -620,13 +619,13 @@
switch(type) {
case PTYPE_INLINE:
lock_var_p = &pCh->Obuf_spinlock;
- WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ write_lock_irqsave(lock_var_p, flags);
stuffIndex = pCh->Obuf_stuff;
bufroom = pCh->Obuf_strip - stuffIndex;
break;
case PTYPE_BYPASS:
lock_var_p = &pCh->Cbuf_spinlock;
- WRITE_LOCK_IRQSAVE(lock_var_p,flags);
+ write_lock_irqsave(lock_var_p, flags);
stuffIndex = pCh->Cbuf_stuff;
bufroom = pCh->Cbuf_strip - stuffIndex;
break;
@@ -645,7 +644,7 @@
break; /* from for()- Enough room: goto proceed */
}
ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+ write_unlock_irqrestore(lock_var_p, flags);
} else
ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
@@ -747,7 +746,7 @@
{
case PTYPE_INLINE:
pCh->Obuf_stuff = stuffIndex; // Store buffer pointer
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
pB->debugInlineQueued++;
// Add the channel pointer to list of channels needing service (first
@@ -757,7 +756,7 @@
case PTYPE_BYPASS:
pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer
- WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
pB->debugBypassQueued++;
// Add the channel pointer to list of channels needing service (first
@@ -840,7 +839,7 @@
count = -1;
goto i2Input_exit;
}
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
// initialize some accelerators and private copies
stripIndex = pCh->Ibuf_strip;
@@ -850,7 +849,7 @@
// If buffer is empty or requested data count was 0, (trivial case) return
// without any further thought.
if ( count == 0 ) {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
goto i2Input_exit;
}
// Adjust for buffer wrap
@@ -891,10 +890,10 @@
if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
pCh->sinceLastFlow -= pCh->whenSendFlow;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
} else {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
i2Input_exit:
@@ -926,7 +925,7 @@
ip2trace (CHANN, ITRC_INPUT, 10, 0);
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
// Adjust for buffer wrap
@@ -947,10 +946,10 @@
if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
{
pCh->sinceLastFlow -= pCh->whenSendFlow;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
} else {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
@@ -979,9 +978,9 @@
// initialize some accelerators and private copies
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
// Adjust for buffer wrap
if (count < 0)
@@ -1045,9 +1044,9 @@
while ( count > 0 ) {
// How much room in output buffer is there?
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if (amountToMove < 0) {
amountToMove += OBUF_SIZE;
}
@@ -1075,7 +1074,7 @@
if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) )
&& amountToMove > 0 )
{
- WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Obuf_spinlock, flags);
stuffIndex = pCh->Obuf_stuff;
// Had room to move some data: don't know whether the block size,
@@ -1102,7 +1101,7 @@
}
pCh->Obuf_stuff = stuffIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
@@ -1352,9 +1351,9 @@
if ( !i2Validate ( pCh ) ) {
return -1;
}
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if (amountToMove < 0) {
amountToMove += OBUF_SIZE;
@@ -1464,11 +1463,11 @@
// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
- while (HAS_INPUT(pB)) {
+ while (I2_HAS_INPUT(pB)) {
// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
// Process packet from fifo a one atomic unit
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock,bflags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, bflags);
// The first word (or two bytes) will have channel number and type of
// packet, possibly other information
@@ -1490,7 +1489,8 @@
// sick!
if ( ((unsigned int)count) > IBUF_SIZE ) {
pB->i2eFatal = 2;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
return; /* Bail out ASAP */
}
// Channel is illegally big ?
@@ -1498,7 +1498,8 @@
(NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
{
iiReadBuf(pB, junkBuffer, count);
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
break; /* From switch: ready for next packet */
}
@@ -1512,14 +1513,15 @@
if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
{
pCh->hotKeyIn = iiReadWord(pB) & 0xff;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
break; /* From the switch: ready for next packet */
}
// Normal data! We crudely assume there is room for the data in our
// buffer because the board wouldn't have exceeded his credit limit.
- WRITE_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,cflags);
+ write_lock_irqsave(&pCh->Ibuf_spinlock, cflags);
// We have 2 locks now
stuffIndex = pCh->Ibuf_stuff;
amountToRead = IBUF_SIZE - stuffIndex;
@@ -1562,8 +1564,9 @@
// Update stuff index
pCh->Ibuf_stuff = stuffIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,cflags);
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
#ifdef USE_IQ
schedule_work(&pCh->tqueue_input);
@@ -1585,7 +1588,8 @@
iiReadBuf(pB, cmdBuffer, count);
// We can release early with buffer grab
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,bflags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
+ bflags);
pc = cmdBuffer;
pcLimit = &(cmdBuffer[count]);
@@ -1830,12 +1834,12 @@
default: // Neither packet? should be impossible
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
PTYPE_OF(pB->i2eLeadoffWord) );
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+ write_unlock_irqrestore(&pB->read_fifo_spinlock,
bflags);
break;
} // End of switch on type of packets
- } //while(board HAS_INPUT)
+ } /*while(board I2_HAS_INPUT)*/
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
@@ -1858,7 +1862,7 @@
{
int rc = 0;
unsigned long flags;
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
if (!pB->i2eWaitingForEmptyFifo) {
if (pB->i2eFifoRemains > (count+reserve)) {
pB->i2eFifoRemains -= count;
@@ -1867,7 +1871,7 @@
rc = count;
}
}
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
return rc;
}
//******************************************************************************
@@ -1898,7 +1902,7 @@
while ( --bailout && notClogged &&
(NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
{
- WRITE_LOCK_IRQSAVE(&pCh->Cbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Cbuf_spinlock, flags);
stripIndex = pCh->Cbuf_strip;
// as long as there are packets for this channel...
@@ -1906,7 +1910,7 @@
while (stripIndex != pCh->Cbuf_stuff) {
pRemove = &(pCh->Cbuf[stripIndex]);
packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
- paddedSize = ROUNDUP(packetSize);
+ paddedSize = roundup(packetSize, 2);
if (paddedSize > 0) {
if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
@@ -1930,7 +1934,7 @@
// Done with this channel. Move to next, removing this one from
// the queue of channels if we cleaned it out (i.e., didn't get clogged.
pCh->Cbuf_strip = stripIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Cbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
} // Either clogged or finished all the work
#ifdef IP2DEBUG_TRACE
@@ -1954,7 +1958,7 @@
i2StuffFifoFlow(i2eBordStrPtr pB)
{
i2ChanStrPtr pCh;
- unsigned short paddedSize = ROUNDUP(sizeof(flowIn));
+ unsigned short paddedSize = roundup(sizeof(flowIn), 2);
ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
pB->i2eFifoRemains, paddedSize );
@@ -2010,7 +2014,7 @@
while ( --bailout && notClogged &&
(NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
{
- WRITE_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Obuf_spinlock, flags);
stripIndex = pCh->Obuf_strip;
ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
@@ -2031,7 +2035,7 @@
packetSize = flowsize + sizeof(i2CmdHeader);
}
flowsize = CREDIT_USAGE(flowsize);
- paddedSize = ROUNDUP(packetSize);
+ paddedSize = roundup(packetSize, 2);
ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
@@ -2086,7 +2090,7 @@
// Done with this channel. Move to next, removing this one from the
// queue of channels if we cleaned it out (i.e., didn't get clogged.
pCh->Obuf_strip = stripIndex;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
if ( notClogged )
{
@@ -2190,10 +2194,11 @@
if (inmail & MB_OUT_STRIPPED) {
pB->i2eFifoOutInts++;
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
pB->i2eFifoRemains = pB->i2eFifoSize;
pB->i2eWaitingForEmptyFifo = 0;
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock,
+ flags);
ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
diff --git a/drivers/char/ip2/i2os.h b/drivers/char/ip2/i2os.h
deleted file mode 100644
index eff9b54..0000000
--- a/drivers/char/ip2/i2os.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Defines, definitions and includes which are heavily dependent
-* on O/S, host, compiler, etc. This file is tailored for:
-* Linux v2.0.0 and later
-* Gnu gcc c2.7.2
-* 80x86 architecture
-*
-*******************************************************************************/
-
-#ifndef I2OS_H /* To prevent multiple includes */
-#define I2OS_H 1
-
-//-------------------------------------------------
-// Required Includes
-//-------------------------------------------------
-
-#include "ip2types.h"
-#include <asm/io.h> /* For inb, etc */
-
-//------------------------------------
-// Defines for I/O instructions:
-//------------------------------------
-
-#define INB(port) inb(port)
-#define OUTB(port,value) outb((value),(port))
-#define INW(port) inw(port)
-#define OUTW(port,value) outw((value),(port))
-#define OUTSW(port,addr,count) outsw((port),(addr),(((count)+1)/2))
-#define OUTSB(port,addr,count) outsb((port),(addr),(((count)+1))&-2)
-#define INSW(port,addr,count) insw((port),(addr),(((count)+1)/2))
-#define INSB(port,addr,count) insb((port),(addr),(((count)+1))&-2)
-
-//--------------------------------------------
-// Interrupt control
-//--------------------------------------------
-
-#define LOCK_INIT(a) rwlock_init(a)
-
-#define SAVE_AND_DISABLE_INTS(a,b) { \
- /* printk("get_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- spin_lock_irqsave(a,b); \
-}
-
-#define RESTORE_INTS(a,b) { \
- /* printk("rel_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- spin_unlock_irqrestore(a,b); \
-}
-
-#define READ_LOCK_IRQSAVE(a,b) { \
- /* printk("get_read_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- read_lock_irqsave(a,b); \
-}
-
-#define READ_UNLOCK_IRQRESTORE(a,b) { \
- /* printk("rel_read_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- read_unlock_irqrestore(a,b); \
-}
-
-#define WRITE_LOCK_IRQSAVE(a,b) { \
- /* printk("get_write_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- write_lock_irqsave(a,b); \
-}
-
-#define WRITE_UNLOCK_IRQRESTORE(a,b) { \
- /* printk("rel_write_lock: 0x%x,%4d,%s\n",(int)a,__LINE__,__FILE__);*/ \
- write_unlock_irqrestore(a,b); \
-}
-
-
-//------------------------------------------------------------------------------
-// Hardware-delay loop
-//
-// Probably used in only one place (see i2ellis.c) but this helps keep things
-// together. Note we have unwound the IN instructions. On machines with a
-// reasonable cache, the eight instructions (1 byte each) should fit in cache
-// nicely, and on un-cached machines, the code-fetch would tend not to dominate.
-// Note that cx is shifted so that "count" still reflects the total number of
-// iterations assuming no unwinding.
-//------------------------------------------------------------------------------
-
-//#define DELAY1MS(port,count,label)
-
-//------------------------------------------------------------------------------
-// Macros to switch to a new stack, saving stack pointers, and to restore the
-// old stack (Used, for example, in i2lib.c) "heap" is the address of some
-// buffer which will become the new stack (working down from highest address).
-// The two words at the two lowest addresses in this stack are for storing the
-// SS and SP.
-//------------------------------------------------------------------------------
-
-//#define TO_NEW_STACK(heap,size)
-//#define TO_OLD_STACK(heap)
-
-//------------------------------------------------------------------------------
-// Macros to save the original IRQ vectors and masks, and to patch in new ones.
-//------------------------------------------------------------------------------
-
-//#define SAVE_IRQ_MASKS(dest)
-//#define WRITE_IRQ_MASKS(src)
-//#define SAVE_IRQ_VECTOR(value,dest)
-//#define WRITE_IRQ_VECTOR(value,src)
-
-//------------------------------------------------------------------------------
-// Macro to copy data from one far pointer to another.
-//------------------------------------------------------------------------------
-
-#define I2_MOVE_DATA(fpSource,fpDest,count) memmove(fpDest,fpSource,count);
-
-//------------------------------------------------------------------------------
-// Macros to issue eoi's to host interrupt control (IBM AT 8259-style).
-//------------------------------------------------------------------------------
-
-//#define MASTER_EOI
-//#define SLAVE_EOI
-
-#endif /* I2OS_H */
-
-
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 319f804..c4f4ca3 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1052,9 +1052,9 @@
* Write to FIFO; don't bother to adjust fifo capacity for this, since
* board will respond almost immediately after SendMail hit.
*/
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 4);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
pB->i2eUsingIrq = boardIrq;
pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
@@ -1072,9 +1072,9 @@
(CMD_OF(tempCommand))[4] = 64; // chars
(CMD_OF(tempCommand))[5] = 87; // HW_TEST
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 8);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
CHANNEL_OF(tempCommand) = 0;
PTYPE_OF(tempCommand) = PTYPE_BYPASS;
@@ -1089,9 +1089,9 @@
CMD_COUNT_OF(tempCommand) = 2;
(CMD_OF(tempCommand))[0] = 44; /* get ping */
(CMD_OF(tempCommand))[1] = 200; /* 200 ms */
- WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
+ write_lock_irqsave(&pB->write_fifo_spinlock, flags);
iiWriteBuf(pB, tempCommand, 4);
- WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
+ write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
#endif
iiEnableMailIrq(pB);
@@ -1270,12 +1270,12 @@
// Data input
if ( pCh->pTTY != NULL ) {
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
i2Input( pCh );
} else
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
} else {
ip2trace(CHANN, ITRC_INPUT, 22, 0 );
@@ -1719,9 +1719,9 @@
ip2_flush_chars( tty );
/* This is the actual move bit. Make sure it does what we need!!!!! */
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
bytesSent = i2Output( pCh, pData, count);
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
@@ -1746,13 +1746,13 @@
// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2_flush_chars( tty );
} else
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
}
@@ -1772,7 +1772,7 @@
i2ChanStrPtr pCh = tty->driver_data;
unsigned long flags;
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
if ( pCh->Pbuf_stuff ) {
// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
@@ -1786,7 +1786,7 @@
}
pCh->Pbuf_stuff -= strip;
}
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
}
/******************************************************************************/
@@ -1804,9 +1804,9 @@
i2ChanStrPtr pCh = tty->driver_data;
unsigned long flags;
- READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
- READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
@@ -1836,12 +1836,12 @@
pCh->Obuf_char_count + pCh->Pbuf_stuff,
pCh->Obuf_char_count, pCh->Pbuf_stuff );
#endif
- READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
+ read_lock_irqsave(&pCh->Obuf_spinlock, flags);
rc = pCh->Obuf_char_count;
- READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
- READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
+ read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
rc += pCh->Pbuf_stuff;
- READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
return rc;
}
@@ -1865,9 +1865,9 @@
#ifdef IP2DEBUG_WRITE
printk (KERN_DEBUG "IP2: flush buffer\n" );
#endif
- WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
pCh->Pbuf_stuff = 0;
- WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
i2FlushOutput( pCh );
ip2_owake(tty);
@@ -1953,15 +1953,15 @@
pCh->throttled = 0;
i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
serviceOutgoingFifo( pCh->pMyBord );
- READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
+ read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
#ifdef IP2DEBUG_READ
printk (KERN_DEBUG "i2Input called from unthrottle\n" );
#endif
i2Input( pCh );
} else
- READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
+ read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
}
static void
@@ -2204,9 +2204,9 @@
* for masking). Caller should use TIOCGICOUNT to see which one it was
*/
case TIOCMIWAIT:
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cprev = pCh->icount; /* note the counters on entry */
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
init_waitqueue_entry(&wait, current);
@@ -2226,9 +2226,9 @@
rc = -ERESTARTSYS;
break;
}
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount; /* atomic copy */
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
rc = -EIO; /* no change => rc */
@@ -2266,9 +2266,9 @@
case TIOCGICOUNT:
ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
- WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
+ write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
- WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
+ write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
p_cuser = argp;
rc = put_user(cnow.cts, &p_cuser->cts);
rc = put_user(cnow.dsr, &p_cuser->dsr);
@@ -2874,7 +2874,7 @@
case 65: /* Board - ip2stat */
if ( pB ) {
rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
- rc = put_user(INB(pB->i2eStatus),
+ rc = put_user(inb(pB->i2eStatus),
(ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
} else {
rc = -ENODEV;