Merge branch 'usb-linus' into usb-next
This is to pick up the fixes in that branch, and let Alan fix the merge
error in drivers/usb/host/ehci-timer.c better than I just did (as I know
I messed it up...)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
new file mode 100644
index 0000000..485a9a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -0,0 +1,32 @@
+OMAP HS USB EHCI controller
+
+This device is usually the child of the omap-usb-host
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Required properties:
+
+- compatible: should be "ti,ehci-omap"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+
+- phys: list of phandles to PHY nodes.
+ This property is required if at least one of the ports are in
+ PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY
+
+To specify the port mode, see
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Example for OMAP4:
+
+usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupts = <0 77 0x4>;
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
+
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
new file mode 100644
index 0000000..14ab428
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -0,0 +1,15 @@
+OMAP HS USB OHCI controller (OMAP3 and later)
+
+Required properties:
+
+- compatible: should be "ti,ohci-omap3"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Example for OMAP4:
+
+usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupts = <0 76 0x4>;
+};
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 093f10c..659855c 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -116,8 +116,6 @@
source "drivers/staging/ozwpan/Kconfig"
-source "drivers/staging/ccg/Kconfig"
-
source "drivers/staging/gdm72xx/Kconfig"
source "drivers/staging/csr/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index fa41b04..b367ea8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -50,7 +50,6 @@
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
-obj-$(CONFIG_USB_G_CCG) += ccg/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
obj-$(CONFIG_CSR_WIFI) += csr/
obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal/
diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c
index a1bce39..113fcea 100644
--- a/drivers/usb/chipidea/usbmisc_imx6q.c
+++ b/drivers/usb/chipidea/usbmisc_imx6q.c
@@ -144,13 +144,13 @@
},
};
-int __init usbmisc_imx6q_drv_init(void)
+static int __init usbmisc_imx6q_drv_init(void)
{
return platform_driver_register(&usbmisc_imx6q_driver);
}
subsys_initcall(usbmisc_imx6q_drv_init);
-void __exit usbmisc_imx6q_drv_exit(void)
+static void __exit usbmisc_imx6q_drv_exit(void)
{
platform_driver_unregister(&usbmisc_imx6q_driver);
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 8ac25ad..d003c8c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -840,14 +840,6 @@
return rv;
}
-static const __u32 acm_tty_speed[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600,
- 1200, 1800, 2400, 4800, 9600, 19200, 38400,
- 57600, 115200, 230400, 460800, 500000, 576000,
- 921600, 1000000, 1152000, 1500000, 2000000,
- 2500000, 3000000, 3500000, 4000000
-};
-
static void acm_tty_set_termios(struct tty_struct *tty,
struct ktermios *termios_old)
{
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c59a112..2f68221 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -155,8 +155,9 @@
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_HCD_OMAP
- bool "EHCI support for OMAP3 and later chips"
+ tristate "EHCI support for OMAP3 and later chips"
depends on USB_EHCI_HCD && ARCH_OMAP
+ select NOP_USB_XCEIV
default y
---help---
Enables support for the on-chip EHCI controller on
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 001fbff..56de410 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
+obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 416a6dc..0c3314c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -757,7 +757,7 @@
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
- u32 ppcd = 0;
+ u32 ppcd = ~0;
/* kick root hub later */
pcd_status = status;
@@ -774,7 +774,7 @@
int pstatus;
/* leverage per-port change bits feature */
- if (ehci->has_ppcd && !(ppcd & (1 << i)))
+ if (!(ppcd & (1 << i)))
continue;
pstatus = ehci_readl(ehci,
&ehci->regs->port_status[i]);
@@ -1251,11 +1251,6 @@
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
-#ifdef CONFIG_USB_EHCI_HCD_OMAP
-#include "ehci-omap.c"
-#define PLATFORM_DRIVER ehci_hcd_omap_driver
-#endif
-
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
@@ -1345,6 +1340,7 @@
!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 7d06e77..7b04ca9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -464,7 +464,7 @@
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
if (test_bit(i, &resume_needed)) {
- temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+ temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
}
@@ -590,7 +590,7 @@
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
- u32 ppcd = 0;
+ u32 ppcd = ~0;
/* init status to no-changes */
buf [0] = 0;
@@ -628,9 +628,10 @@
for (i = 0; i < ports; i++) {
/* leverage per-port change bits feature */
- if (ehci->has_ppcd && !(ppcd & (1 << i)))
- continue;
- temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+ if (ppcd & (1 << i))
+ temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
+ else
+ temp = 0;
/*
* Return status information even for ports with OWNER set.
@@ -870,10 +871,9 @@
usb_hcd_end_port_resume(&hcd->self, wIndex);
/* stop resume signaling */
- temp = ehci_readl(ehci, status_reg);
- ehci_writel(ehci,
- temp & ~(PORT_RWC_BITS | PORT_RESUME),
- status_reg);
+ temp &= ~(PORT_RWC_BITS |
+ PORT_SUSPEND | PORT_RESUME);
+ ehci_writel(ehci, temp, status_reg);
clear_bit(wIndex, &ehci->resuming_ports);
retval = handshake(ehci, status_reg,
PORT_RESUME, 0, 2000 /* 2msec */);
@@ -883,7 +883,7 @@
wIndex + 1, retval);
goto error;
}
- temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+ temp = ehci_readl(ehci, status_reg);
}
}
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 3065809..5cd9f96 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -225,7 +225,7 @@
(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
hcd->rsrc_start = r->start;
- hcd->rsrc_len = r->end - r->start + 1;
+ hcd->rsrc_len = resource_size(r);
hcd->regs = ehci_mv->op_regs;
hcd->irq = platform_get_irq(pdev, 0);
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index e9301fb..a38c8c8 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,11 +28,7 @@
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
-
#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include <asm/mach-types.h>
-
#include "ehci.h"
#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
@@ -61,8 +57,6 @@
struct device *dev = &pdev->dev;
struct ehci_hcd *ehci;
- dev_info(&pdev->dev, "initializing i.MX USB Controller\n");
-
if (!pdata) {
dev_err(dev, "No platform data given, bailing out.\n");
return -EINVAL;
@@ -178,7 +172,7 @@
return ret;
}
-static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
+static int ehci_mxc_drv_remove(struct platform_device *pdev)
{
struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 0555ee4..5de3e43 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -4,10 +4,11 @@
* Bus Glue for the EHCI controllers in OMAP3/4
* Tested on several OMAP3 boards, and OMAP4 Pandaboard
*
- * Copyright (C) 2007-2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2013 Texas Instruments, Inc.
* Author: Vikram Pandita <vikram.pandita@ti.com>
* Author: Anand Gadiyar <gadiyar@ti.com>
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
*
* Copyright (C) 2009 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -28,21 +29,23 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * TODO (last updated Feb 27, 2010):
- * - add kernel-doc
- * - enable AUTOIDLE
- * - add suspend/resume
- * - add HSIC and TLL support
- * - convert to use hwmod and runtime PM
*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
#include <linux/platform_data/usb-omap.h>
@@ -57,10 +60,16 @@
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
+
+static const char hcd_name[] = "ehci-omap";
+
/*-------------------------------------------------------------------------*/
-static const struct hc_driver ehci_omap_hc_driver;
-
+struct omap_hcd {
+ struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
+ int nports;
+};
static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
{
@@ -72,100 +81,17 @@
return __raw_readl(base + reg);
}
-
-static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
- unsigned reg = 0;
-
- reg = ULPI_FUNC_CTRL_RESET
- /* FUNCTION_CTRL_SET register */
- | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
- /* Write */
- | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
- /* PORTn */
- | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
- /* start ULPI access*/
- | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
-
- ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg);
-
- /* Wait for ULPI access completion */
- while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI)
- & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
- cpu_relax();
-
- if (time_after(jiffies, timeout)) {
- dev_dbg(hcd->self.controller,
- "phy reset operation timed out\n");
- break;
- }
- }
-}
-
-static int omap_ehci_init(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int rc;
- struct usbhs_omap_platform_data *pdata;
-
- pdata = hcd->self.controller->platform_data;
-
- /* Hold PHYs in reset while initializing EHCI controller */
- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- udelay(10);
- }
-
- /* Soft reset the PHY using PHY reset command over ULPI */
- if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(hcd, 0);
- if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
- omap_ehci_soft_phy_reset(hcd, 1);
-
- /* we know this is the memory we want, no need to ioremap again */
- ehci->caps = hcd->regs;
-
- rc = ehci_setup(hcd);
-
- if (pdata->phy_reset) {
- /* Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
-
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
- }
-
- return rc;
-}
-
-static void disable_put_regulator(
- struct usbhs_omap_platform_data *pdata)
-{
- int i;
-
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
- if (pdata->regulator[i]) {
- regulator_disable(pdata->regulator[i]);
- regulator_put(pdata->regulator[i]);
- }
- }
-}
-
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
+static struct hc_driver __read_mostly ehci_omap_hc_driver;
+
+static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
+ .extra_priv_size = sizeof(struct omap_hcd),
+};
+
+static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
+
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -175,15 +101,15 @@
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usbhs_omap_platform_data *pdata = dev->platform_data;
- struct resource *res;
- struct usb_hcd *hcd;
- void __iomem *regs;
- int ret = -ENODEV;
- int irq;
- int i;
- char supply[7];
+ struct device *dev = &pdev->dev;
+ struct usbhs_omap_platform_data *pdata = dev->platform_data;
+ struct resource *res;
+ struct usb_hcd *hcd;
+ void __iomem *regs;
+ int ret = -ENODEV;
+ int irq;
+ int i;
+ struct omap_hcd *omap;
if (usb_disabled())
return -ENODEV;
@@ -193,52 +119,74 @@
return -ENODEV;
}
- irq = platform_get_irq_byname(pdev, "ehci-irq");
+ /* For DT boot, get platform data from parent. i.e. usbhshost */
+ if (dev->of_node) {
+ pdata = dev->parent->platform_data;
+ dev->platform_data = pdata;
+ }
+
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ return -ENODEV;
+ }
+
+ irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "EHCI irq failed\n");
return -ENODEV;
}
- res = platform_get_resource_byname(pdev,
- IORESOURCE_MEM, "ehci");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- return -ENODEV;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
- regs = ioremap(res->start, resource_size(res));
- if (!regs) {
- dev_err(dev, "UHH EHCI ioremap failed\n");
- return -ENOMEM;
- }
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &omap_ehci_dma_mask;
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));
if (!hcd) {
- dev_err(dev, "failed to create hcd with err %d\n", ret);
- ret = -ENOMEM;
- goto err_io;
+ dev_err(dev, "Failed to create HCD\n");
+ return -ENOMEM;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
+ hcd_to_ehci(hcd)->caps = regs;
- /* get ehci regulator and enable */
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
- if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
- pdata->regulator[i] = NULL;
- continue;
+ omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
+ omap->nports = pdata->nports;
+
+ platform_set_drvdata(pdev, hcd);
+
+ /* get the PHY devices if needed */
+ for (i = 0 ; i < omap->nports ; i++) {
+ struct usb_phy *phy;
+
+ /* get the PHY device */
+ if (dev->of_node)
+ phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
+ else
+ phy = devm_usb_get_phy_dev(dev, i);
+ if (IS_ERR(phy) || !phy) {
+ /* Don't bail out if PHY is not absolutely necessary */
+ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
+ continue;
+
+ ret = IS_ERR(phy) ? PTR_ERR(phy) : -ENODEV;
+ dev_err(dev, "Can't get PHY device for port %d: %d\n",
+ i, ret);
+ goto err_phy;
}
- snprintf(supply, sizeof(supply), "hsusb%d", i);
- pdata->regulator[i] = regulator_get(dev, supply);
- if (IS_ERR(pdata->regulator[i])) {
- pdata->regulator[i] = NULL;
- dev_dbg(dev,
- "failed to get ehci port%d regulator\n", i);
- } else {
- regulator_enable(pdata->regulator[i]);
- }
+
+ omap->phy[i] = phy;
}
pm_runtime_enable(dev);
@@ -262,16 +210,34 @@
goto err_pm_runtime;
}
+ /*
+ * Bring PHYs out of reset.
+ * Even though HSIC mode is a PHY-less mode, the reset
+ * line exists between the chips and can be modelled
+ * as a PHY device for reset control.
+ */
+ for (i = 0; i < omap->nports; i++) {
+ if (!omap->phy[i])
+ continue;
+
+ usb_phy_init(omap->phy[i]);
+ /* bring PHY out of suspend */
+ usb_phy_set_suspend(omap->phy[i], 0);
+ }
return 0;
err_pm_runtime:
- disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
+
+err_phy:
+ for (i = 0; i < omap->nports; i++) {
+ if (omap->phy[i])
+ usb_phy_shutdown(omap->phy[i]);
+ }
+
usb_put_hcd(hcd);
-err_io:
- iounmap(regs);
return ret;
}
@@ -286,14 +252,19 @@
*/
static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
+ int i;
usb_remove_hcd(hcd);
- disable_put_regulator(dev->platform_data);
- iounmap(hcd->regs);
- usb_put_hcd(hcd);
+ for (i = 0; i < omap->nports; i++) {
+ if (omap->phy[i])
+ usb_phy_shutdown(omap->phy[i]);
+ }
+
+ usb_put_hcd(hcd);
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
@@ -308,6 +279,13 @@
hcd->driver->shutdown(hcd);
}
+static const struct of_device_id omap_ehci_dt_ids[] = {
+ { .compatible = "ti,ehci-omap" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
+
static struct platform_driver ehci_hcd_omap_driver = {
.probe = ehci_hcd_omap_probe,
.remove = ehci_hcd_omap_remove,
@@ -315,56 +293,35 @@
/*.suspend = ehci_hcd_omap_suspend, */
/*.resume = ehci_hcd_omap_resume, */
.driver = {
- .name = "ehci-omap",
+ .name = hcd_name,
+ .of_match_table = of_match_ptr(omap_ehci_dt_ids),
}
};
/*-------------------------------------------------------------------------*/
-static const struct hc_driver ehci_omap_hc_driver = {
- .description = hcd_name,
- .product_desc = "OMAP-EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
+static int __init ehci_omap_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
- /*
- * basic lifecycle operations
- */
- .reset = omap_ehci_init,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
+ ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
+ return platform_driver_register(&ehci_hcd_omap_driver);
+}
+module_init(ehci_omap_init);
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static void __exit ehci_omap_cleanup(void)
+{
+ platform_driver_unregister(&ehci_hcd_omap_driver);
+}
+module_exit(ehci_omap_cleanup);
MODULE_ALIAS("platform:ehci-omap");
MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 914a3ec..38c45fb 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -305,7 +305,7 @@
return err;
}
-static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
+static int ehci_orion_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct clk *clk;
@@ -333,7 +333,7 @@
static struct platform_driver ehci_orion_driver = {
.probe = ehci_orion_drv_probe,
- .remove = __exit_p(ehci_orion_drv_remove),
+ .remove = ehci_orion_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "orion-ehci",
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 20ebf6a..738490e 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -92,20 +92,21 @@
static void s5p_setup_vbus_gpio(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
int err;
int gpio;
- if (!pdev->dev.of_node)
+ if (!dev->of_node)
return;
- gpio = of_get_named_gpio(pdev->dev.of_node,
- "samsung,vbus-gpio", 0);
+ gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0);
if (!gpio_is_valid(gpio))
return;
- err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
+ err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
+ "ehci_vbus_gpio");
if (err)
- dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
+ dev_err(dev, "can't request ehci vbus gpio %d", gpio);
}
static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 3565a30..e30e396 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -170,7 +170,7 @@
return ret;
}
-static int __exit ehci_hcd_sh_remove(struct platform_device *pdev)
+static int ehci_hcd_sh_remove(struct platform_device *pdev)
{
struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = priv->hcd;
@@ -196,7 +196,7 @@
static struct platform_driver ehci_hcd_sh_driver = {
.probe = ehci_hcd_sh_probe,
- .remove = __exit_p(ehci_hcd_sh_remove),
+ .remove = ehci_hcd_sh_remove
.shutdown = ehci_hcd_sh_shutdown,
.driver = {
.name = "sh_ehci",
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index c3fa130..dca8fc4 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -113,8 +113,8 @@
if (want != actual) {
- /* Poll again later, but give up after about 20 ms */
- if (ehci->ASS_poll_count++ < 20) {
+ /* Poll again later, but give up after about 2-4 ms */
+ if (ehci->ASS_poll_count++ < 2) {
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
return;
}
@@ -159,8 +159,8 @@
if (want != actual) {
- /* Poll again later, but give up after about 20 ms */
- if (ehci->PSS_poll_count++ < 20) {
+ /* Poll again later, but give up after about 2-4 ms */
+ if (ehci->PSS_poll_count++ < 2) {
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
return;
}
@@ -295,43 +295,31 @@
/* Handle lost (or very late) IAA interrupts */
static void ehci_iaa_watchdog(struct ehci_hcd *ehci)
{
- if (ehci->rh_state != EHCI_RH_RUNNING)
- return;
+ u32 cmd, status;
+
+ /* If we get here, IAA is *REALLY* late. It's barely
+ * conceivable that the system is so busy that CMD_IAAD
+ * is still legitimately set, so let's be sure it's
+ * clear before we read STS_IAA. (The HC should clear
+ * CMD_IAAD when it sets STS_IAA.)
+ */
+ cmd = ehci_readl(ehci, &ehci->regs->command);
/*
- * Lost IAA irqs wedge things badly; seen first with a vt8235.
- * So we need this watchdog, but must protect it against both
- * (a) SMP races against real IAA firing and retriggering, and
- * (b) clean HC shutdown, when IAA watchdog was pending.
+ * If IAA is set here it either legitimately triggered
+ * after the watchdog timer expired (_way_ late, so we'll
+ * still count it as lost) ... or a silicon erratum:
+ * - VIA seems to set IAA without triggering the IRQ;
+ * - IAAD potentially cleared without setting IAA.
*/
- if (1) {
- u32 cmd, status;
-
- /* If we get here, IAA is *REALLY* late. It's barely
- * conceivable that the system is so busy that CMD_IAAD
- * is still legitimately set, so let's be sure it's
- * clear before we read STS_IAA. (The HC should clear
- * CMD_IAAD when it sets STS_IAA.)
- */
- cmd = ehci_readl(ehci, &ehci->regs->command);
-
- /*
- * If IAA is set here it either legitimately triggered
- * after the watchdog timer expired (_way_ late, so we'll
- * still count it as lost) ... or a silicon erratum:
- * - VIA seems to set IAA without triggering the IRQ;
- * - IAAD potentially cleared without setting IAA.
- */
- status = ehci_readl(ehci, &ehci->regs->status);
- if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
- COUNT(ehci->stats.lost_iaa);
- ehci_writel(ehci, STS_IAA, &ehci->regs->status);
- }
-
- ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n",
- status, cmd);
- end_unlink_async(ehci);
+ status = ehci_readl(ehci, &ehci->regs->status);
+ if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
+ COUNT(ehci->stats.lost_iaa);
+ ehci_writel(ehci, STS_IAA, &ehci->regs->status);
}
+
+ ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd);
+ end_unlink_async(ehci);
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index eb35d96..ddfc314 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
/*-------------------------------------------------------------------------*/
@@ -112,6 +114,8 @@
/*-------------------------------------------------------------------------*/
+static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
+
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@@ -141,14 +145,13 @@
return -ENODEV;
}
- irq = platform_get_irq_byname(pdev, "ohci-irq");
+ irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "OHCI irq failed\n");
return -ENODEV;
}
- res = platform_get_resource_byname(pdev,
- IORESOURCE_MEM, "ohci");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "UHH OHCI get resource failed\n");
return -ENOMEM;
@@ -160,6 +163,13 @@
return -ENOMEM;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &omap_ohci_dma_mask;
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));
@@ -229,12 +239,20 @@
hcd->driver->shutdown(hcd);
}
+static const struct of_device_id omap_ohci_dt_ids[] = {
+ { .compatible = "ti,ohci-omap3" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
+
static struct platform_driver ohci_hcd_omap3_driver = {
.probe = ohci_hcd_omap3_probe,
.remove = ohci_hcd_omap3_remove,
.shutdown = ohci_hcd_omap3_shutdown,
.driver = {
.name = "ohci-omap3",
+ .of_match_table = of_match_ptr(omap_ohci_dt_ids),
},
};
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index dd573ab..c21386e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3084,7 +3084,7 @@
/* Allocate memory for our private */
if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) {
- dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for private data\n");
+ dev_err(&dev->dev, "Failed to allocate memory for private data\n");
return -ENOMEM;
}
kref_init(&sisusb->kref);
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index f713f6a..d3a1cce 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -307,18 +307,7 @@
.id_table = usb3503_id,
};
-static int __init usb3503_init(void)
-{
- return i2c_add_driver(&usb3503_driver);
-}
-
-static void __exit usb3503_exit(void)
-{
- i2c_del_driver(&usb3503_driver);
-}
-
-module_init(usb3503_init);
-module_exit(usb3503_exit);
+module_i2c_driver(usb3503_driver);
MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
MODULE_DESCRIPTION("USB3503 USB HUB driver");
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index af9cb11..8b9de95 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1212,7 +1212,7 @@
static struct isp1301 *the_transceiver;
-static int __exit isp1301_remove(struct i2c_client *i2c)
+static int isp1301_remove(struct i2c_client *i2c)
{
struct isp1301 *isp;
@@ -1634,7 +1634,7 @@
.name = "isp1301_omap",
},
.probe = isp1301_probe,
- .remove = __exit_p(isp1301_remove),
+ .remove = isp1301_remove,
.id_table = isp1301_id,
};
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index a994715..24d573a 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -658,7 +658,7 @@
return 0;
}
-static int __exit twl4030_usb_remove(struct platform_device *pdev)
+static int twl4030_usb_remove(struct platform_device *pdev)
{
struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;
@@ -702,7 +702,7 @@
static struct platform_driver twl4030_usb_driver = {
.probe = twl4030_usb_probe,
- .remove = __exit_p(twl4030_usb_remove),
+ .remove = twl4030_usb_remove,
.driver = {
.name = "twl4030_usb",
.owner = THIS_MODULE,
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 8cd6cf4..7f3c5b0 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -393,7 +393,7 @@
return 0;
}
-static int __exit twl6030_usb_remove(struct platform_device *pdev)
+static int twl6030_usb_remove(struct platform_device *pdev)
{
struct twl6030_usb *twl = platform_get_drvdata(pdev);
@@ -420,7 +420,7 @@
static struct platform_driver twl6030_usb_driver = {
.probe = twl6030_usb_probe,
- .remove = __exit_p(twl6030_usb_remove),
+ .remove = twl6030_usb_remove,
.driver = {
.name = "twl6030_usb",
.owner = THIS_MODULE,
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c
index 9d85991..bafd67f 100644
--- a/drivers/usb/phy/mv_u3d_phy.c
+++ b/drivers/usb/phy/mv_u3d_phy.c
@@ -313,7 +313,7 @@
return ret;
}
-static int __exit mv_u3d_phy_remove(struct platform_device *pdev)
+static int mv_u3d_phy_remove(struct platform_device *pdev)
{
struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 809fb32..107ff9e 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1252,8 +1252,7 @@
if (mos7840_port->write_urb) {
/* if this urb had a transfer buffer already (old tx) free it */
- if (mos7840_port->write_urb->transfer_buffer != NULL)
- kfree(mos7840_port->write_urb->transfer_buffer);
+ kfree(mos7840_port->write_urb->transfer_buffer);
usb_free_urb(mos7840_port->write_urb);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index a19ed74..8424478 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -256,22 +256,18 @@
* serial_down - shut down hardware
* @tport: tty port to shut down
*
- * Shut down a USB serial port unless it is the console. We never
- * shut down the console hardware as it will always be in use. Serialized
- * against activate by the tport mutex and kept to matching open/close pairs
+ * Shut down a USB serial port. Serialized against activate by the
+ * tport mutex and kept to matching open/close pairs
* of calls by the ASYNCB_INITIALIZED flag.
+ *
+ * Not called if tty is console.
*/
static void serial_down(struct tty_port *tport)
{
struct usb_serial_port *port =
container_of(tport, struct usb_serial_port, port);
struct usb_serial_driver *drv = port->serial->type;
- /*
- * The console is magical. Do not hang up the console hardware
- * or there will be tears.
- */
- if (port->port.console)
- return;
+
if (drv->close)
drv->close(port);
}
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index ecea478..06a3d22 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1457,8 +1457,7 @@
retStatus = ISD200_ERROR;
else {
info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
- info->RegsBuf = (unsigned char *)
- kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
+ info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
info->srb.sense_buffer =
kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) {
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index cb79de6..2696489 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -195,6 +195,7 @@
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = min(maxp, ONETOUCH_PKT_LEN);
onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -245,8 +246,7 @@
input_dev->open = usb_onetouch_open;
input_dev->close = usb_onetouch_close;
- usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
- (maxp > 8 ? 8 : maxp),
+ usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp,
usb_onetouch_irq, onetouch, endpoint->bInterval);
onetouch->irq->transfer_dma = onetouch->data_dma;
onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 4d22d0f..52464fb 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -469,14 +469,12 @@
* @lpm_capable: device supports LPM
* @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
* @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
+ * @usb3_lpm_enabled: USB3 hardware LPM enabled
* @string_langid: language ID for strings
* @product: iProduct string, if present (static)
* @manufacturer: iManufacturer string, if present (static)
* @serial: iSerialNumber string, if present (static)
* @filelist: usbfs files that are open to this device
- * @usb_classdev: USB class device that was created for usbfs device
- * access from userspace
- * @usbfs_dentry: usbfs dentry entry for the device
* @maxchild: number of ports if hub
* @quirks: quirks of the whole device
* @urbnum: number of URBs submitted for the whole device