| /* |
| * arch/powerpc/platforms/pseries/xics.c |
| * |
| * Copyright 2000 IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/types.h> |
| #include <linux/threads.h> |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/signal.h> |
| #include <linux/init.h> |
| #include <linux/gfp.h> |
| #include <linux/radix-tree.h> |
| #include <linux/cpu.h> |
| |
| #include <asm/firmware.h> |
| #include <asm/prom.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/smp.h> |
| #include <asm/rtas.h> |
| #include <asm/hvcall.h> |
| #include <asm/machdep.h> |
| #include <asm/i8259.h> |
| |
| #include "xics.h" |
| #include "plpar_wrappers.h" |
| |
| #define XICS_IPI 2 |
| #define XICS_IRQ_SPURIOUS 0 |
| |
| /* Want a priority other than 0. Various HW issues require this. */ |
| #define DEFAULT_PRIORITY 5 |
| |
| /* |
| * Mark IPIs as higher priority so we can take them inside interrupts that |
| * arent marked IRQF_DISABLED |
| */ |
| #define IPI_PRIORITY 4 |
| |
| struct xics_ipl { |
| union { |
| u32 word; |
| u8 bytes[4]; |
| } xirr_poll; |
| union { |
| u32 word; |
| u8 bytes[4]; |
| } xirr; |
| u32 dummy; |
| union { |
| u32 word; |
| u8 bytes[4]; |
| } qirr; |
| }; |
| |
| static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS]; |
| |
| static unsigned int default_server = 0xFF; |
| static unsigned int default_distrib_server = 0; |
| static unsigned int interrupt_server_size = 8; |
| |
| static struct irq_host *xics_host; |
| |
| /* |
| * XICS only has a single IPI, so encode the messages per CPU |
| */ |
| struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; |
| |
| /* RTAS service tokens */ |
| static int ibm_get_xive; |
| static int ibm_set_xive; |
| static int ibm_int_on; |
| static int ibm_int_off; |
| |
| |
| /* Direct HW low level accessors */ |
| |
| |
| static inline unsigned int direct_xirr_info_get(int n_cpu) |
| { |
| return in_be32(&xics_per_cpu[n_cpu]->xirr.word); |
| } |
| |
| static inline void direct_xirr_info_set(int n_cpu, int value) |
| { |
| out_be32(&xics_per_cpu[n_cpu]->xirr.word, value); |
| } |
| |
| static inline void direct_cppr_info(int n_cpu, u8 value) |
| { |
| out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value); |
| } |
| |
| static inline void direct_qirr_info(int n_cpu, u8 value) |
| { |
| out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value); |
| } |
| |
| |
| /* LPAR low level accessors */ |
| |
| |
| static inline unsigned int lpar_xirr_info_get(int n_cpu) |
| { |
| unsigned long lpar_rc; |
| unsigned long return_value; |
| |
| lpar_rc = plpar_xirr(&return_value); |
| if (lpar_rc != H_SUCCESS) |
| panic(" bad return code xirr - rc = %lx \n", lpar_rc); |
| return (unsigned int)return_value; |
| } |
| |
| static inline void lpar_xirr_info_set(int n_cpu, int value) |
| { |
| unsigned long lpar_rc; |
| unsigned long val64 = value & 0xffffffff; |
| |
| lpar_rc = plpar_eoi(val64); |
| if (lpar_rc != H_SUCCESS) |
| panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc, |
| val64); |
| } |
| |
| static inline void lpar_cppr_info(int n_cpu, u8 value) |
| { |
| unsigned long lpar_rc; |
| |
| lpar_rc = plpar_cppr(value); |
| if (lpar_rc != H_SUCCESS) |
| panic("bad return code cppr - rc = %lx\n", lpar_rc); |
| } |
| |
| static inline void lpar_qirr_info(int n_cpu , u8 value) |
| { |
| unsigned long lpar_rc; |
| |
| lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value); |
| if (lpar_rc != H_SUCCESS) |
| panic("bad return code qirr - rc = %lx\n", lpar_rc); |
| } |
| |
| |
| /* High level handlers and init code */ |
| |
| |
| #ifdef CONFIG_SMP |
| static int get_irq_server(unsigned int virq) |
| { |
| unsigned int server; |
| /* For the moment only implement delivery to all cpus or one cpu */ |
| cpumask_t cpumask = irq_desc[virq].affinity; |
| cpumask_t tmp = CPU_MASK_NONE; |
| |
| if (!distribute_irqs) |
| return default_server; |
| |
| if (cpus_equal(cpumask, CPU_MASK_ALL)) { |
| server = default_distrib_server; |
| } else { |
| cpus_and(tmp, cpu_online_map, cpumask); |
| |
| if (cpus_empty(tmp)) |
| server = default_distrib_server; |
| else |
| server = get_hard_smp_processor_id(first_cpu(tmp)); |
| } |
| |
| return server; |
| |
| } |
| #else |
| static int get_irq_server(unsigned int virq) |
| { |
| return default_server; |
| } |
| #endif |
| |
| |
| static void xics_unmask_irq(unsigned int virq) |
| { |
| unsigned int irq; |
| int call_status; |
| unsigned int server; |
| |
| pr_debug("xics: unmask virq %d\n", virq); |
| |
| irq = (unsigned int)irq_map[virq].hwirq; |
| pr_debug(" -> map to hwirq 0x%x\n", irq); |
| if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) |
| return; |
| |
| server = get_irq_server(virq); |
| |
| call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, |
| DEFAULT_PRIORITY); |
| if (call_status != 0) { |
| printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive " |
| "returned %d\n", irq, call_status); |
| printk("set_xive %x, server %x\n", ibm_set_xive, server); |
| return; |
| } |
| |
| /* Now unmask the interrupt (often a no-op) */ |
| call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq); |
| if (call_status != 0) { |
| printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on " |
| "returned %d\n", irq, call_status); |
| return; |
| } |
| } |
| |
| static void xics_mask_real_irq(unsigned int irq) |
| { |
| int call_status; |
| unsigned int server; |
| |
| if (irq == XICS_IPI) |
| return; |
| |
| call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq); |
| if (call_status != 0) { |
| printk(KERN_ERR "xics_disable_real_irq: irq=%u: " |
| "ibm_int_off returned %d\n", irq, call_status); |
| return; |
| } |
| |
| server = get_irq_server(irq); |
| /* Have to set XIVE to 0xff to be able to remove a slot */ |
| call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, 0xff); |
| if (call_status != 0) { |
| printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)" |
| " returned %d\n", irq, call_status); |
| return; |
| } |
| } |
| |
| static void xics_mask_irq(unsigned int virq) |
| { |
| unsigned int irq; |
| |
| pr_debug("xics: mask virq %d\n", virq); |
| |
| irq = (unsigned int)irq_map[virq].hwirq; |
| if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) |
| return; |
| xics_mask_real_irq(irq); |
| } |
| |
| static unsigned int xics_startup(unsigned int virq) |
| { |
| unsigned int irq; |
| |
| /* force a reverse mapping of the interrupt so it gets in the cache */ |
| irq = (unsigned int)irq_map[virq].hwirq; |
| irq_radix_revmap(xics_host, irq); |
| |
| /* unmask it */ |
| xics_unmask_irq(virq); |
| return 0; |
| } |
| |
| static void xics_eoi_direct(unsigned int virq) |
| { |
| int cpu = smp_processor_id(); |
| unsigned int irq = (unsigned int)irq_map[virq].hwirq; |
| |
| iosync(); |
| direct_xirr_info_set(cpu, (0xff << 24) | irq); |
| } |
| |
| |
| static void xics_eoi_lpar(unsigned int virq) |
| { |
| int cpu = smp_processor_id(); |
| unsigned int irq = (unsigned int)irq_map[virq].hwirq; |
| |
| iosync(); |
| lpar_xirr_info_set(cpu, (0xff << 24) | irq); |
| } |
| |
| static inline unsigned int xics_remap_irq(unsigned int vec) |
| { |
| unsigned int irq; |
| |
| vec &= 0x00ffffff; |
| |
| if (vec == XICS_IRQ_SPURIOUS) |
| return NO_IRQ; |
| irq = irq_radix_revmap(xics_host, vec); |
| if (likely(irq != NO_IRQ)) |
| return irq; |
| |
| printk(KERN_ERR "Interrupt %u (real) is invalid," |
| " disabling it.\n", vec); |
| xics_mask_real_irq(vec); |
| return NO_IRQ; |
| } |
| |
| static unsigned int xics_get_irq_direct(struct pt_regs *regs) |
| { |
| unsigned int cpu = smp_processor_id(); |
| |
| return xics_remap_irq(direct_xirr_info_get(cpu)); |
| } |
| |
| static unsigned int xics_get_irq_lpar(struct pt_regs *regs) |
| { |
| unsigned int cpu = smp_processor_id(); |
| |
| return xics_remap_irq(lpar_xirr_info_get(cpu)); |
| } |
| |
| #ifdef CONFIG_SMP |
| |
| static irqreturn_t xics_ipi_dispatch(int cpu, struct pt_regs *regs) |
| { |
| WARN_ON(cpu_is_offline(cpu)); |
| |
| while (xics_ipi_message[cpu].value) { |
| if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, |
| &xics_ipi_message[cpu].value)) { |
| mb(); |
| smp_message_recv(PPC_MSG_CALL_FUNCTION, regs); |
| } |
| if (test_and_clear_bit(PPC_MSG_RESCHEDULE, |
| &xics_ipi_message[cpu].value)) { |
| mb(); |
| smp_message_recv(PPC_MSG_RESCHEDULE, regs); |
| } |
| #if 0 |
| if (test_and_clear_bit(PPC_MSG_MIGRATE_TASK, |
| &xics_ipi_message[cpu].value)) { |
| mb(); |
| smp_message_recv(PPC_MSG_MIGRATE_TASK, regs); |
| } |
| #endif |
| #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) |
| if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, |
| &xics_ipi_message[cpu].value)) { |
| mb(); |
| smp_message_recv(PPC_MSG_DEBUGGER_BREAK, regs); |
| } |
| #endif |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| |
| direct_qirr_info(cpu, 0xff); |
| |
| return xics_ipi_dispatch(cpu, regs); |
| } |
| |
| static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| |
| lpar_qirr_info(cpu, 0xff); |
| |
| return xics_ipi_dispatch(cpu, regs); |
| } |
| |
| void xics_cause_IPI(int cpu) |
| { |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| lpar_qirr_info(cpu, IPI_PRIORITY); |
| else |
| direct_qirr_info(cpu, IPI_PRIORITY); |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static void xics_set_cpu_priority(int cpu, unsigned char cppr) |
| { |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| lpar_cppr_info(cpu, cppr); |
| else |
| direct_cppr_info(cpu, cppr); |
| iosync(); |
| } |
| |
| static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) |
| { |
| unsigned int irq; |
| int status; |
| int xics_status[2]; |
| unsigned long newmask; |
| cpumask_t tmp = CPU_MASK_NONE; |
| |
| irq = (unsigned int)irq_map[virq].hwirq; |
| if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) |
| return; |
| |
| status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); |
| |
| if (status) { |
| printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive " |
| "returns %d\n", irq, status); |
| return; |
| } |
| |
| /* For the moment only implement delivery to all cpus or one cpu */ |
| if (cpus_equal(cpumask, CPU_MASK_ALL)) { |
| newmask = default_distrib_server; |
| } else { |
| cpus_and(tmp, cpu_online_map, cpumask); |
| if (cpus_empty(tmp)) |
| return; |
| newmask = get_hard_smp_processor_id(first_cpu(tmp)); |
| } |
| |
| status = rtas_call(ibm_set_xive, 3, 1, NULL, |
| irq, newmask, xics_status[1]); |
| |
| if (status) { |
| printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive " |
| "returns %d\n", irq, status); |
| return; |
| } |
| } |
| |
| void xics_setup_cpu(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| xics_set_cpu_priority(cpu, 0xff); |
| |
| /* |
| * Put the calling processor into the GIQ. This is really only |
| * necessary from a secondary thread as the OF start-cpu interface |
| * performs this function for us on primary threads. |
| * |
| * XXX: undo of teardown on kexec needs this too, as may hotplug |
| */ |
| rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, |
| (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); |
| } |
| |
| |
| static struct irq_chip xics_pic_direct = { |
| .typename = " XICS ", |
| .startup = xics_startup, |
| .mask = xics_mask_irq, |
| .unmask = xics_unmask_irq, |
| .eoi = xics_eoi_direct, |
| .set_affinity = xics_set_affinity |
| }; |
| |
| |
| static struct irq_chip xics_pic_lpar = { |
| .typename = " XICS ", |
| .startup = xics_startup, |
| .mask = xics_mask_irq, |
| .unmask = xics_unmask_irq, |
| .eoi = xics_eoi_lpar, |
| .set_affinity = xics_set_affinity |
| }; |
| |
| |
| static int xics_host_match(struct irq_host *h, struct device_node *node) |
| { |
| /* IBM machines have interrupt parents of various funky types for things |
| * like vdevices, events, etc... The trick we use here is to match |
| * everything here except the legacy 8259 which is compatible "chrp,iic" |
| */ |
| return !device_is_compatible(node, "chrp,iic"); |
| } |
| |
| static int xics_host_map_direct(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); |
| |
| get_irq_desc(virq)->status |= IRQ_LEVEL; |
| set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq); |
| return 0; |
| } |
| |
| static int xics_host_map_lpar(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); |
| |
| get_irq_desc(virq)->status |= IRQ_LEVEL; |
| set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq); |
| return 0; |
| } |
| |
| static int xics_host_xlate(struct irq_host *h, struct device_node *ct, |
| u32 *intspec, unsigned int intsize, |
| irq_hw_number_t *out_hwirq, unsigned int *out_flags) |
| |
| { |
| /* Current xics implementation translates everything |
| * to level. It is not technically right for MSIs but this |
| * is irrelevant at this point. We might get smarter in the future |
| */ |
| *out_hwirq = intspec[0]; |
| *out_flags = IRQ_TYPE_LEVEL_LOW; |
| |
| return 0; |
| } |
| |
| static struct irq_host_ops xics_host_direct_ops = { |
| .match = xics_host_match, |
| .map = xics_host_map_direct, |
| .xlate = xics_host_xlate, |
| }; |
| |
| static struct irq_host_ops xics_host_lpar_ops = { |
| .match = xics_host_match, |
| .map = xics_host_map_lpar, |
| .xlate = xics_host_xlate, |
| }; |
| |
| static void __init xics_init_host(void) |
| { |
| struct irq_host_ops *ops; |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| ops = &xics_host_lpar_ops; |
| else |
| ops = &xics_host_direct_ops; |
| xics_host = irq_alloc_host(IRQ_HOST_MAP_TREE, 0, ops, |
| XICS_IRQ_SPURIOUS); |
| BUG_ON(xics_host == NULL); |
| irq_set_default_host(xics_host); |
| } |
| |
| static void __init xics_map_one_cpu(int hw_id, unsigned long addr, |
| unsigned long size) |
| { |
| #ifdef CONFIG_SMP |
| int i; |
| |
| /* This may look gross but it's good enough for now, we don't quite |
| * have a hard -> linux processor id matching. |
| */ |
| for_each_possible_cpu(i) { |
| if (!cpu_present(i)) |
| continue; |
| if (hw_id == get_hard_smp_processor_id(i)) { |
| xics_per_cpu[i] = ioremap(addr, size); |
| return; |
| } |
| } |
| #else |
| if (hw_id != 0) |
| return; |
| xics_per_cpu[0] = ioremap(addr, size); |
| #endif /* CONFIG_SMP */ |
| } |
| |
| static void __init xics_init_one_node(struct device_node *np, |
| unsigned int *indx) |
| { |
| unsigned int ilen; |
| const u32 *ireg; |
| |
| /* This code does the theorically broken assumption that the interrupt |
| * server numbers are the same as the hard CPU numbers. |
| * This happens to be the case so far but we are playing with fire... |
| * should be fixed one of these days. -BenH. |
| */ |
| ireg = get_property(np, "ibm,interrupt-server-ranges", NULL); |
| |
| /* Do that ever happen ? we'll know soon enough... but even good'old |
| * f80 does have that property .. |
| */ |
| WARN_ON(ireg == NULL); |
| if (ireg) { |
| /* |
| * set node starting index for this node |
| */ |
| *indx = *ireg; |
| } |
| ireg = get_property(np, "reg", &ilen); |
| if (!ireg) |
| panic("xics_init_IRQ: can't find interrupt reg property"); |
| |
| while (ilen >= (4 * sizeof(u32))) { |
| unsigned long addr, size; |
| |
| /* XXX Use proper OF parsing code here !!! */ |
| addr = (unsigned long)*ireg++ << 32; |
| ilen -= sizeof(u32); |
| addr |= *ireg++; |
| ilen -= sizeof(u32); |
| size = (unsigned long)*ireg++ << 32; |
| ilen -= sizeof(u32); |
| size |= *ireg++; |
| ilen -= sizeof(u32); |
| xics_map_one_cpu(*indx, addr, size); |
| (*indx)++; |
| } |
| } |
| |
| |
| static void __init xics_setup_8259_cascade(void) |
| { |
| struct device_node *np, *old, *found = NULL; |
| int cascade, naddr; |
| const u32 *addrp; |
| unsigned long intack = 0; |
| |
| for_each_node_by_type(np, "interrupt-controller") |
| if (device_is_compatible(np, "chrp,iic")) { |
| found = np; |
| break; |
| } |
| if (found == NULL) { |
| printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); |
| return; |
| } |
| cascade = irq_of_parse_and_map(found, 0); |
| if (cascade == NO_IRQ) { |
| printk(KERN_ERR "xics: failed to map cascade interrupt"); |
| return; |
| } |
| pr_debug("xics: cascade mapped to irq %d\n", cascade); |
| |
| for (old = of_node_get(found); old != NULL ; old = np) { |
| np = of_get_parent(old); |
| of_node_put(old); |
| if (np == NULL) |
| break; |
| if (strcmp(np->name, "pci") != 0) |
| continue; |
| addrp = get_property(np, "8259-interrupt-acknowledge", NULL); |
| if (addrp == NULL) |
| continue; |
| naddr = prom_n_addr_cells(np); |
| intack = addrp[naddr-1]; |
| if (naddr > 1) |
| intack |= ((unsigned long)addrp[naddr-2]) << 32; |
| } |
| if (intack) |
| printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack); |
| i8259_init(found, intack); |
| of_node_put(found); |
| set_irq_chained_handler(cascade, pseries_8259_cascade); |
| } |
| |
| void __init xics_init_IRQ(void) |
| { |
| int i; |
| struct device_node *np; |
| u32 ilen, indx = 0; |
| const u32 *ireg; |
| int found = 0; |
| |
| ppc64_boot_msg(0x20, "XICS Init"); |
| |
| ibm_get_xive = rtas_token("ibm,get-xive"); |
| ibm_set_xive = rtas_token("ibm,set-xive"); |
| ibm_int_on = rtas_token("ibm,int-on"); |
| ibm_int_off = rtas_token("ibm,int-off"); |
| |
| for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") { |
| found = 1; |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| break; |
| xics_init_one_node(np, &indx); |
| } |
| if (found == 0) |
| return; |
| |
| xics_init_host(); |
| |
| /* Find the server numbers for the boot cpu. */ |
| for (np = of_find_node_by_type(NULL, "cpu"); |
| np; |
| np = of_find_node_by_type(np, "cpu")) { |
| ireg = get_property(np, "reg", &ilen); |
| if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) { |
| ireg = get_property(np, |
| "ibm,ppc-interrupt-gserver#s", &ilen); |
| i = ilen / sizeof(int); |
| if (ireg && i > 0) { |
| default_server = ireg[0]; |
| /* take last element */ |
| default_distrib_server = ireg[i-1]; |
| } |
| ireg = get_property(np, |
| "ibm,interrupt-server#-size", NULL); |
| if (ireg) |
| interrupt_server_size = *ireg; |
| break; |
| } |
| } |
| of_node_put(np); |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| ppc_md.get_irq = xics_get_irq_lpar; |
| else |
| ppc_md.get_irq = xics_get_irq_direct; |
| |
| xics_setup_cpu(); |
| |
| xics_setup_8259_cascade(); |
| |
| ppc64_boot_msg(0x21, "XICS Done"); |
| } |
| |
| |
| #ifdef CONFIG_SMP |
| void xics_request_IPIs(void) |
| { |
| unsigned int ipi; |
| |
| ipi = irq_create_mapping(xics_host, XICS_IPI); |
| BUG_ON(ipi == NO_IRQ); |
| |
| /* |
| * IPIs are marked IRQF_DISABLED as they must run with irqs |
| * disabled |
| */ |
| set_irq_handler(ipi, handle_percpu_irq); |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED, |
| "IPI", NULL); |
| else |
| request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED, |
| "IPI", NULL); |
| } |
| #endif /* CONFIG_SMP */ |
| |
| void xics_teardown_cpu(int secondary) |
| { |
| int cpu = smp_processor_id(); |
| unsigned int ipi; |
| struct irq_desc *desc; |
| |
| xics_set_cpu_priority(cpu, 0); |
| |
| /* |
| * Clear IPI |
| */ |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| lpar_qirr_info(cpu, 0xff); |
| else |
| direct_qirr_info(cpu, 0xff); |
| |
| /* |
| * we need to EOI the IPI if we got here from kexec down IPI |
| * |
| * probably need to check all the other interrupts too |
| * should we be flagging idle loop instead? |
| * or creating some task to be scheduled? |
| */ |
| |
| ipi = irq_find_mapping(xics_host, XICS_IPI); |
| if (ipi == XICS_IRQ_SPURIOUS) |
| return; |
| desc = get_irq_desc(ipi); |
| if (desc->chip && desc->chip->eoi) |
| desc->chip->eoi(ipi); |
| |
| /* |
| * Some machines need to have at least one cpu in the GIQ, |
| * so leave the master cpu in the group. |
| */ |
| if (secondary) |
| rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, |
| (1UL << interrupt_server_size) - 1 - |
| default_distrib_server, 0); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| |
| /* Interrupts are disabled. */ |
| void xics_migrate_irqs_away(void) |
| { |
| int status; |
| unsigned int irq, virq, cpu = smp_processor_id(); |
| |
| /* Reject any interrupt that was queued to us... */ |
| xics_set_cpu_priority(cpu, 0); |
| |
| /* remove ourselves from the global interrupt queue */ |
| status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, |
| (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); |
| WARN_ON(status < 0); |
| |
| /* Allow IPIs again... */ |
| xics_set_cpu_priority(cpu, DEFAULT_PRIORITY); |
| |
| for_each_irq(virq) { |
| struct irq_desc *desc; |
| int xics_status[2]; |
| unsigned long flags; |
| |
| /* We cant set affinity on ISA interrupts */ |
| if (virq < NUM_ISA_INTERRUPTS) |
| continue; |
| if (irq_map[virq].host != xics_host) |
| continue; |
| irq = (unsigned int)irq_map[virq].hwirq; |
| /* We need to get IPIs still. */ |
| if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) |
| continue; |
| desc = get_irq_desc(virq); |
| |
| /* We only need to migrate enabled IRQS */ |
| if (desc == NULL || desc->chip == NULL |
| || desc->action == NULL |
| || desc->chip->set_affinity == NULL) |
| continue; |
| |
| spin_lock_irqsave(&desc->lock, flags); |
| |
| status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); |
| if (status) { |
| printk(KERN_ERR "migrate_irqs_away: irq=%u " |
| "ibm,get-xive returns %d\n", |
| virq, status); |
| goto unlock; |
| } |
| |
| /* |
| * We only support delivery to all cpus or to one cpu. |
| * The irq has to be migrated only in the single cpu |
| * case. |
| */ |
| if (xics_status[0] != get_hard_smp_processor_id(cpu)) |
| goto unlock; |
| |
| printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n", |
| virq, cpu); |
| |
| /* Reset affinity to all cpus */ |
| desc->chip->set_affinity(virq, CPU_MASK_ALL); |
| irq_desc[irq].affinity = CPU_MASK_ALL; |
| unlock: |
| spin_unlock_irqrestore(&desc->lock, flags); |
| } |
| } |
| #endif |