drivers/rtc/rtc-isl12057.c: report error code upon failure in dev_err() calls
As pointed out by Mark, it is generally useful to log the error code when
reporting a failure. This patch improves existing calls to dev_err() in
ISL12057 driver to also report error code.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Suggested-by: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index fe56282..6e1fcfb 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -170,8 +170,8 @@
mutex_lock(&data->lock);
ret = regmap_read(data->regmap, ISL12057_REG_SR, &sr);
if (ret) {
- dev_err(dev, "%s: unable to read oscillator status flag\n",
- __func__);
+ dev_err(dev, "%s: unable to read oscillator status flag (%d)\n",
+ __func__, ret);
goto out;
} else {
if (sr & ISL12057_REG_SR_OSF) {
@@ -183,7 +183,8 @@
ret = regmap_bulk_read(data->regmap, ISL12057_REG_RTC_SC, regs,
ISL12057_RTC_SEC_LEN);
if (ret)
- dev_err(dev, "%s: unable to read RTC time\n", __func__);
+ dev_err(dev, "%s: unable to read RTC time section (%d)\n",
+ __func__, ret);
out:
mutex_unlock(&data->lock);
@@ -210,7 +211,8 @@
ret = regmap_bulk_write(data->regmap, ISL12057_REG_RTC_SC, regs,
ISL12057_RTC_SEC_LEN);
if (ret) {
- dev_err(dev, "%s: writing RTC time failed\n", __func__);
+ dev_err(dev, "%s: unable to write RTC time section (%d)\n",
+ __func__, ret);
goto out;
}
@@ -221,7 +223,8 @@
ret = regmap_update_bits(data->regmap, ISL12057_REG_SR,
ISL12057_REG_SR_OSF, 0);
if (ret < 0)
- dev_err(dev, "Unable to clear oscillator failure bit\n");
+ dev_err(dev, "%s: unable to clear osc. failure bit (%d)\n",
+ __func__, ret);
out:
mutex_unlock(&data->lock);
@@ -242,7 +245,8 @@
ret = regmap_update_bits(regmap, ISL12057_REG_INT,
ISL12057_REG_INT_EOSC, 0);
if (ret < 0) {
- dev_err(dev, "Unable to enable oscillator\n");
+ dev_err(dev, "%s: unable to enable oscillator (%d)\n",
+ __func__, ret);
return ret;
}
@@ -250,7 +254,8 @@
ret = regmap_update_bits(regmap, ISL12057_REG_SR,
ISL12057_REG_SR_A1F, 0);
if (ret < 0) {
- dev_err(dev, "Unable to clear alarm bit\n");
+ dev_err(dev, "%s: unable to clear alarm bit (%d)\n",
+ __func__, ret);
return ret;
}
@@ -284,7 +289,8 @@
regmap = devm_regmap_init_i2c(client, &isl12057_rtc_regmap_config);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
- dev_err(dev, "regmap allocation failed: %d\n", ret);
+ dev_err(dev, "%s: regmap allocation failed (%d)\n",
+ __func__, ret);
return ret;
}