Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM based SoC Board updates for v3.14
* r8a7791 (R-Car M2) based Koelsch board
- Let Koelsch multiplatform boot with Koelsch DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Remove duplicate CCF initialization
- Add Ether and DU support
* r8a7790 (R-Car H2) based Lager board
- Let Lager multiplatform boot with Lager DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Enable multiplaform kernel support
* r8a7740 (R-Mobile A1) based Armadillo board
- Set backlight enable GPIO
* sh7374 (SH-Mobile AP4) based Mackerel board
- Correct USBHS pinconf entry
* tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits)
ARM: shmobile: mackerel: Fix USBHS pinconf entry
ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB
ARM: shmobile: Let Lager multiplatform boot with Lager DTB
ARM: shmobile: Remove non-multiplatform Koelsch reference support
ARM: shmobile: Remove non-multiplatform Lager reference support
ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization
ARM: shmobile: lager-reference: Enable multiplaform kernel support
ARM: shmobile: armadillo: Set backlight enable GPIO
ARM: shmobile: Koelsch: add Ether support
ARM: shmobile: koelsch: Add DU device
arm: shmobile: clks: remove duplicated clock from r7s72100
ARM: shmobile: koelsch: Conditionally select MICREL_PHY
ARM: shmobile: rcar-gen2: Initialize CCF before clock sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
ARM: shmobile: r8a7778: add USB Func DMAEngine support
ARM: rcar-gen2: Do not setup timer in non-secure mode
...
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4179056..6f527e1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -233,7 +233,6 @@
r8a7779-marzen-reference.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
- r8a7790-lager-reference.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
@@ -241,7 +240,8 @@
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai-reference.dtb \
- r8a7791-koelsch-reference.dtb
+ r8a7791-koelsch.dtb \
+ r8a7790-lager.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3e57d45..3386406 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -12,6 +12,7 @@
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
@@ -27,6 +28,10 @@
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+config ARCH_R8A7790
+ bool "R-Car H2 (R8A77900)"
+ select RENESAS_IRQC
+
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
@@ -46,6 +51,10 @@
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+config MACH_LAGER
+ bool "Lager board"
+ depends on ARCH_R8A7790
+
comment "Renesas ARM SoCs System Configuration"
endif
@@ -111,6 +120,7 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -119,6 +129,7 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
@@ -127,6 +138,7 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
@@ -250,32 +262,11 @@
depends on ARCH_R8A7790
select USE_OF
-config MACH_LAGER_REFERENCE
- bool "Lager board - Reference Device Tree Implementation"
- depends on ARCH_R8A7790
- select USE_OF
- ---help---
- Use reference implementation of Lager board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_KOELSCH
bool "Koelsch board"
depends on ARCH_R8A7791
select USE_OF
-
-config MACH_KOELSCH_REFERENCE
- bool "Koelsch board - Reference Device Tree Implementation"
- depends on ARCH_R8A7791
- select USE_OF
- ---help---
- Use reference implementation of Koelsch board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
+ select MICREL_PHY if SH_ETH
config MACH_KZM9G
bool "KZM-A9-GT board"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 1c13104..fe7d4ff 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d-reference.o
+obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
@@ -70,11 +71,9 @@
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
-obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
-obj-$(CONFIG_MACH_KOELSCH_REFERENCE) += board-koelsch-reference.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 759e4f8f..99455ec 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -9,11 +9,9 @@
loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
-loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
-loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index d9e28c7a..2ea8935 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -423,7 +423,7 @@
.max_brightness = 255,
.dft_brightness = 255,
.pwm_period_ns = 33333, /* 30kHz */
- .enable_gpio = -1,
+ .enable_gpio = 61,
};
static struct platform_device pwm_backlight_device = {
@@ -1203,9 +1203,6 @@
r8a7740_pinmux_init();
r8a7740_meram_workaround();
- /* LCDC0 */
- gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
/* GETHER */
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index eb5b54f..afb3f68 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -25,6 +25,7 @@
#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/usb-rcar-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index a804a17..652b592 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -19,7 +19,8 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <mach/common.h>
@@ -30,7 +31,31 @@
static void __init koelsch_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
- of_clk_init(NULL);
+ /*
+ * This is a really crude hack to provide clkdev support to the SCIF
+ * and CMT devices until they get moved to DT.
+ */
+ static const char * const scif_names[] = {
+ "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
+ "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
+ "scifa4", "scifa5",
+ };
+ struct clk *clk;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
+ clk = clk_get(NULL, scif_names[i]);
+ if (clk) {
+ clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+ clk_put(clk);
+ }
+ }
+
+ clk = clk_get(NULL, "cmt0");
+ if (clk) {
+ clk_register_clkdev(clk, NULL, "sh_cmt.0");
+ clk_put(clk);
+ }
#else
r8a7791_clock_init();
#endif
@@ -39,6 +64,7 @@
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
+ "renesas,koelsch",
"renesas,koelsch-reference",
NULL,
};
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 6e12914..de7cc64 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -19,20 +19,89 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/leds.h>
+#include <linux/phy.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
#include <linux/platform_device.h>
+#include <linux/sh_eth.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/r8a7791.h>
#include <mach/rcar-gen2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+ {
+ .type = RCAR_DU_ENCODER_NONE,
+ .output = RCAR_DU_OUTPUT_LVDS0,
+ .connector.lvds.panel = {
+ .width_mm = 210,
+ .height_mm = 158,
+ .mode = {
+ .clock = 65000,
+ .hdisplay = 1024,
+ .hsync_start = 1048,
+ .hsync_end = 1184,
+ .htotal = 1344,
+ .vdisplay = 768,
+ .vsync_start = 771,
+ .vsync_end = 777,
+ .vtotal = 806,
+ .flags = 0,
+ },
+ },
+ },
+};
+
+static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
+ .encoders = koelsch_du_encoders,
+ .num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+ DEFINE_RES_MEM(0xfeb00000, 0x40000),
+ DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+ DEFINE_RES_IRQ(gic_spi(256)),
+ DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
+{
+ struct platform_device_info info = {
+ .name = "rcar-du-r8a7791",
+ .id = -1,
+ .res = du_resources,
+ .num_res = ARRAY_SIZE(du_resources),
+ .data = &koelsch_du_pdata,
+ .size_data = sizeof(koelsch_du_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+ };
+
+ platform_device_register_full(&info);
+}
+
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+ .phy = 0x1,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .phy_interface = PHY_INTERFACE_MODE_RMII,
+ .ether_link_active_low = 1,
+};
+
+static const struct resource ether_resources[] __initconst = {
+ DEFINE_RES_MEM(0xee700000, 0x400),
+ DEFINE_RES_IRQ(gic_spi(162)),
+};
+
/* LEDS */
static struct gpio_led koelsch_leds[] = {
{
@@ -80,6 +149,22 @@
};
static const struct pinctrl_map koelsch_pinctrl_map[] = {
+ /* DU */
+ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+ "du_rgb666", "du"),
+ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+ "du_sync", "du"),
+ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+ "du_clk_out_0", "du"),
+ /* Ether */
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+ "eth_link", "eth"),
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+ "eth_mdio", "eth"),
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+ "eth_rmii", "eth"),
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+ "intc_irq0", "intc"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
"scif0_data_d", "scif0"),
@@ -95,12 +180,44 @@
ARRAY_SIZE(koelsch_pinctrl_map));
r8a7791_pinmux_init();
r8a7791_add_standard_devices();
+ platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
+ ether_resources,
+ ARRAY_SIZE(ether_resources),
+ ðer_pdata, sizeof(ether_pdata));
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&koelsch_leds_pdata,
sizeof(koelsch_leds_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&koelsch_keys_pdata,
sizeof(koelsch_keys_pdata));
+
+ koelsch_add_du_device();
+}
+
+/*
+ * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int koelsch_ksz8041_fixup(struct phy_device *phydev)
+{
+ u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+ phyctrl1 &= ~0xc000;
+ phyctrl1 |= 0x4000;
+ return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init koelsch_init(void)
+{
+ koelsch_add_standard_devices();
+
+ if (IS_ENABLED(CONFIG_PHYLIB))
+ phy_register_fixup_for_id("r8a7791-ether-ff:01",
+ koelsch_ksz8041_fixup);
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
@@ -112,7 +229,7 @@
.smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_time = rcar_gen2_timer_init,
- .init_machine = koelsch_add_standard_devices,
+ .init_machine = koelsch_init,
.init_late = shmobile_init_late,
.dt_compat = koelsch_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 51a3bcc..a6e271d 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -18,6 +18,8 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <mach/common.h>
@@ -27,12 +29,42 @@
static void __init lager_add_standard_devices(void)
{
+#ifdef CONFIG_COMMON_CLK
+ /*
+ * This is a really crude hack to provide clkdev support to the SCIF
+ * and CMT devices until they get moved to DT.
+ */
+ static const char * const scif_names[] = {
+ "scifa0", "scifa1", "scifb0", "scifb1",
+ "scifb2", "scifa2", "scif0", "scif1",
+ "hscif0", "hscif1",
+ };
+ struct clk *clk;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
+ clk = clk_get(NULL, scif_names[i]);
+ if (clk) {
+ clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+ clk_put(clk);
+ }
+ }
+
+ clk = clk_get(NULL, "cmt0");
+ if (clk) {
+ clk_register_clkdev(clk, NULL, "sh_cmt.0");
+ clk_put(clk);
+ }
+#else
r8a7790_clock_init();
+#endif
+
r8a7790_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *lager_boards_compat_dt[] __initdata = {
+ "renesas,lager",
"renesas,lager-reference",
NULL,
};
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 207acf0..b3ee96e 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1406,7 +1406,7 @@
/* USBHS1 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_vbus", "usb1"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.&", "pfc-sh7372",
+ PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_vbus", pin_pulldown_conf),
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_otg_id_0", "usb1"),
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index 7b457ae..0814a50 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -181,7 +181,6 @@
CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
};
void __init r7s72100_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 80cd8f3..09c5c7d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -292,9 +292,13 @@
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+ CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index ff2d60d5..f546126 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -122,6 +122,7 @@
/* MSTP */
enum {
+ MSTP813,
MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
MSTP719, MSTP718, MSTP715, MSTP714,
MSTP522,
@@ -132,6 +133,7 @@
};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
@@ -192,6 +194,7 @@
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
};
#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 2aeec46..87e349d 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -652,6 +652,7 @@
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+ CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index b497f93..f4076a5 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -20,13 +20,30 @@
#define __ASM_R8A7778_H__
#include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
/* HPB-DMA slave IDs */
enum {
HPBDMA_SLAVE_DUMMY,
HPBDMA_SLAVE_SDHI0_TX,
HPBDMA_SLAVE_SDHI0_RX,
+ HPBDMA_SLAVE_SSI0_TX,
+ HPBDMA_SLAVE_SSI0_RX,
+ HPBDMA_SLAVE_SSI1_TX,
+ HPBDMA_SLAVE_SSI1_RX,
+ HPBDMA_SLAVE_SSI2_TX,
+ HPBDMA_SLAVE_SSI2_RX,
+ HPBDMA_SLAVE_SSI3_TX,
+ HPBDMA_SLAVE_SSI3_RX,
+ HPBDMA_SLAVE_SSI4_TX,
+ HPBDMA_SLAVE_SSI4_RX,
+ HPBDMA_SLAVE_SSI5_TX,
+ HPBDMA_SLAVE_SSI5_RX,
+ HPBDMA_SLAVE_SSI6_TX,
+ HPBDMA_SLAVE_SSI6_RX,
+ HPBDMA_SLAVE_SSI7_TX,
+ HPBDMA_SLAVE_SSI7_RX,
+ HPBDMA_SLAVE_SSI8_TX,
+ HPBDMA_SLAVE_SSI8_RX,
HPBDMA_SLAVE_HPBIF0_TX,
HPBDMA_SLAVE_HPBIF0_RX,
HPBDMA_SLAVE_HPBIF1_TX,
@@ -45,6 +62,8 @@
HPBDMA_SLAVE_HPBIF7_RX,
HPBDMA_SLAVE_HPBIF8_TX,
HPBDMA_SLAVE_HPBIF8_RX,
+ HPBDMA_SLAVE_USBFUNC_TX,
+ HPBDMA_SLAVE_USBFUNC_RX,
};
extern void r8a7778_add_standard_devices(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 81701cf..7ea6308 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -319,6 +319,29 @@
#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
+#define HPBDMA_SSI(_id) \
+{ \
+ .id = HPBDMA_SLAVE_SSI## _id ##_TX, \
+ .addr = 0xffd91008 + (_id * 0x40), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DMDL | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = _id + (_id << 8), \
+ .dma_ch = (28 + _id), \
+}, { \
+ .id = HPBDMA_SLAVE_SSI## _id ##_RX, \
+ .addr = 0xffd9100c + (_id * 0x40), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SMDL | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = _id + (_id << 8), \
+ .dma_ch = (28 + _id), \
+}
+
#define HPBDMA_HPBIF(_id) \
{ \
.id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \
@@ -371,8 +394,34 @@
.port = 0x0D0C,
.flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
.dma_ch = 22,
+ }, {
+ .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
+ .addr = 0xffe60018,
+ .dcr = HPB_DMAE_DCR_SPDS_32BIT |
+ HPB_DMAE_DCR_DMDL |
+ HPB_DMAE_DCR_DPDS_32BIT,
+ .port = 0x0000,
+ .dma_ch = 14,
+ }, {
+ .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
+ .addr = 0xffe6001c,
+ .dcr = HPB_DMAE_DCR_SMDL |
+ HPB_DMAE_DCR_SPDS_32BIT |
+ HPB_DMAE_DCR_DPDS_32BIT,
+ .port = 0x0101,
+ .dma_ch = 15,
},
+ HPBDMA_SSI(0),
+ HPBDMA_SSI(1),
+ HPBDMA_SSI(2),
+ HPBDMA_SSI(3),
+ HPBDMA_SSI(4),
+ HPBDMA_SSI(5),
+ HPBDMA_SSI(6),
+ HPBDMA_SSI(7),
+ HPBDMA_SSI(8),
+
HPBDMA_HPBIF(0),
HPBDMA_HPBIF(1),
HPBDMA_HPBIF(2),
@@ -385,24 +434,44 @@
};
static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+ HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
+ HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3543c3b..8474818 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -67,6 +67,27 @@
&r8a7790_gpio##idx##_platform_data, \
sizeof(r8a7790_gpio##idx##_platform_data))
+static struct resource i2c_resources[] __initdata = {
+ /* I2C0 */
+ DEFINE_RES_MEM(0xE6508000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(287)),
+ /* I2C1 */
+ DEFINE_RES_MEM(0xE6518000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(288)),
+ /* I2C2 */
+ DEFINE_RES_MEM(0xE6530000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(286)),
+ /* I2C3 */
+ DEFINE_RES_MEM(0xE6540000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(290)),
+
+};
+
+#define r8a7790_register_i2c(idx) \
+ platform_device_register_simple( \
+ "i2c-rcar", idx, \
+ i2c_resources + (2 * idx), 2); \
+
void __init r8a7790_pinmux_init(void)
{
r8a7790_register_pfc();
@@ -76,6 +97,10 @@
r8a7790_register_gpio(3);
r8a7790_register_gpio(4);
r8a7790_register_gpio(5);
+ r8a7790_register_i2c(0);
+ r8a7790_register_i2c(1);
+ r8a7790_register_i2c(2);
+ r8a7790_register_i2c(3);
}
#define SCIF_COMMON(scif_type, baseaddr, irq) \
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5734c24..69ccc6c6 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk/shmobile.h>
#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -44,8 +45,10 @@
void __init rcar_gen2_timer_init(void)
{
-#ifdef CONFIG_ARM_ARCH_TIMER
+#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
u32 mode = rcar_gen2_read_mode_pins();
+#endif
+#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
int extal_mhz = 0;
u32 freq;
@@ -78,14 +81,28 @@
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
- /* Update registers with correct frequency */
- iowrite32(freq, base + CNTFID0);
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+ /*
+ * Update the timer if it is either not running, or is not at the
+ * right frequency. The timer is only configurable in secure mode
+ * so this avoids an abort if the loader started the timer and
+ * entered the kernel in non-secure mode.
+ */
- /* make sure arch timer is started by setting bit 0 of CNTCR */
- iowrite32(1, base + CNTCR);
+ if ((ioread32(base + CNTCR) & 1) == 0 ||
+ ioread32(base + CNTFID0) != freq) {
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ }
+
iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
+#ifdef CONFIG_COMMON_CLK
+ rcar_gen2_clocks_init(mode);
+#endif
clocksource_of_init();
}
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
new file mode 100644
index 0000000..420f0b0
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
+#define __DT_BINDINGS_CLOCK_R8A7790_H__
+
+/* CPG */
+#define R8A7790_CLK_MAIN 0
+#define R8A7790_CLK_PLL0 1
+#define R8A7790_CLK_PLL1 2
+#define R8A7790_CLK_PLL3 3
+#define R8A7790_CLK_LB 4
+#define R8A7790_CLK_QSPI 5
+#define R8A7790_CLK_SDH 6
+#define R8A7790_CLK_SD0 7
+#define R8A7790_CLK_SD1 8
+#define R8A7790_CLK_Z 9
+
+/* MSTP1 */
+#define R8A7790_CLK_TMU1 11
+#define R8A7790_CLK_TMU3 21
+#define R8A7790_CLK_TMU2 22
+#define R8A7790_CLK_CMT0 24
+#define R8A7790_CLK_TMU0 25
+#define R8A7790_CLK_VSP1_DU1 27
+#define R8A7790_CLK_VSP1_DU0 28
+#define R8A7790_CLK_VSP1_RT 30
+#define R8A7790_CLK_VSP1_SY 31
+
+/* MSTP2 */
+#define R8A7790_CLK_SCIFA2 2
+#define R8A7790_CLK_SCIFA1 3
+#define R8A7790_CLK_SCIFA0 4
+#define R8A7790_CLK_SCIFB0 6
+#define R8A7790_CLK_SCIFB1 7
+#define R8A7790_CLK_SCIFB2 16
+#define R8A7790_CLK_SYS_DMAC0 18
+#define R8A7790_CLK_SYS_DMAC1 19
+
+/* MSTP3 */
+#define R8A7790_CLK_TPU0 4
+#define R8A7790_CLK_MMCIF1 5
+#define R8A7790_CLK_SDHI3 11
+#define R8A7790_CLK_SDHI2 12
+#define R8A7790_CLK_SDHI1 13
+#define R8A7790_CLK_SDHI0 14
+#define R8A7790_CLK_MMCIF0 15
+#define R8A7790_CLK_SSUSB 28
+#define R8A7790_CLK_CMT1 29
+#define R8A7790_CLK_USBDMAC0 30
+#define R8A7790_CLK_USBDMAC1 31
+
+/* MSTP5 */
+#define R8A7790_CLK_THERMAL 22
+#define R8A7790_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7790_CLK_EHCI 3
+#define R8A7790_CLK_HSUSB 4
+#define R8A7790_CLK_HSCIF1 16
+#define R8A7790_CLK_HSCIF0 17
+#define R8A7790_CLK_SCIF1 20
+#define R8A7790_CLK_SCIF0 21
+#define R8A7790_CLK_DU2 22
+#define R8A7790_CLK_DU1 23
+#define R8A7790_CLK_DU0 24
+#define R8A7790_CLK_LVDS1 25
+#define R8A7790_CLK_LVDS0 26
+
+/* MSTP8 */
+#define R8A7790_CLK_VIN3 8
+#define R8A7790_CLK_VIN2 9
+#define R8A7790_CLK_VIN1 10
+#define R8A7790_CLK_VIN0 11
+#define R8A7790_CLK_ETHER 13
+#define R8A7790_CLK_SATA1 14
+#define R8A7790_CLK_SATA0 15
+
+/* MSTP9 */
+#define R8A7790_CLK_GPIO5 7
+#define R8A7790_CLK_GPIO4 8
+#define R8A7790_CLK_GPIO3 9
+#define R8A7790_CLK_GPIO2 10
+#define R8A7790_CLK_GPIO1 11
+#define R8A7790_CLK_GPIO0 12
+#define R8A7790_CLK_RCAN1 15
+#define R8A7790_CLK_RCAN0 16
+#define R8A7790_CLK_IICDVFS 26
+#define R8A7790_CLK_I2C3 28
+#define R8A7790_CLK_I2C2 29
+#define R8A7790_CLK_I2C1 30
+#define R8A7790_CLK_I2C0 31
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
new file mode 100644
index 0000000..df1715b
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
+#define __DT_BINDINGS_CLOCK_R8A7791_H__
+
+/* CPG */
+#define R8A7791_CLK_MAIN 0
+#define R8A7791_CLK_PLL0 1
+#define R8A7791_CLK_PLL1 2
+#define R8A7791_CLK_PLL3 3
+#define R8A7791_CLK_LB 4
+#define R8A7791_CLK_QSPI 5
+#define R8A7791_CLK_SDH 6
+#define R8A7791_CLK_SD0 7
+#define R8A7791_CLK_Z 8
+
+/* MSTP1 */
+#define R8A7791_CLK_TMU1 11
+#define R8A7791_CLK_TMU3 21
+#define R8A7791_CLK_TMU2 22
+#define R8A7791_CLK_CMT0 24
+#define R8A7791_CLK_TMU0 25
+#define R8A7791_CLK_VSP1_DU1 27
+#define R8A7791_CLK_VSP1_DU0 28
+#define R8A7791_CLK_VSP1_SY 31
+
+/* MSTP2 */
+#define R8A7791_CLK_SCIFA2 2
+#define R8A7791_CLK_SCIFA1 3
+#define R8A7791_CLK_SCIFA0 4
+#define R8A7791_CLK_SCIFB0 6
+#define R8A7791_CLK_SCIFB1 7
+#define R8A7791_CLK_SCIFB2 16
+#define R8A7791_CLK_DMAC 18
+
+/* MSTP3 */
+#define R8A7791_CLK_TPU0 4
+#define R8A7791_CLK_SDHI2 11
+#define R8A7791_CLK_SDHI1 12
+#define R8A7791_CLK_SDHI0 14
+#define R8A7791_CLK_MMCIF0 15
+#define R8A7791_CLK_SSUSB 28
+#define R8A7791_CLK_CMT1 29
+#define R8A7791_CLK_USBDMAC0 30
+#define R8A7791_CLK_USBDMAC1 31
+
+/* MSTP5 */
+#define R8A7791_CLK_THERMAL 22
+#define R8A7791_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7791_CLK_HSUSB 4
+#define R8A7791_CLK_HSCIF2 13
+#define R8A7791_CLK_SCIF5 14
+#define R8A7791_CLK_SCIF4 15
+#define R8A7791_CLK_HSCIF1 16
+#define R8A7791_CLK_HSCIF0 17
+#define R8A7791_CLK_SCIF3 18
+#define R8A7791_CLK_SCIF2 19
+#define R8A7791_CLK_SCIF1 20
+#define R8A7791_CLK_SCIF0 21
+#define R8A7791_CLK_DU1 23
+#define R8A7791_CLK_DU0 24
+#define R8A7791_CLK_LVDS0 26
+
+/* MSTP8 */
+#define R8A7791_CLK_VIN2 9
+#define R8A7791_CLK_VIN1 10
+#define R8A7791_CLK_VIN0 11
+#define R8A7791_CLK_ETHER 13
+#define R8A7791_CLK_SATA1 14
+#define R8A7791_CLK_SATA0 15
+
+/* MSTP9 */
+#define R8A7791_CLK_GPIO7 4
+#define R8A7791_CLK_GPIO6 5
+#define R8A7791_CLK_GPIO5 7
+#define R8A7791_CLK_GPIO4 8
+#define R8A7791_CLK_GPIO3 9
+#define R8A7791_CLK_GPIO2 10
+#define R8A7791_CLK_GPIO1 11
+#define R8A7791_CLK_GPIO0 12
+#define R8A7791_CLK_RCAN1 15
+#define R8A7791_CLK_RCAN0 16
+#define R8A7791_CLK_I2C5 25
+#define R8A7791_CLK_IICDVFS 26
+#define R8A7791_CLK_I2C4 27
+#define R8A7791_CLK_I2C3 28
+#define R8A7791_CLK_I2C2 29
+#define R8A7791_CLK_I2C1 30
+#define R8A7791_CLK_I2C0 31
+
+/* MSTP11 */
+#define R8A7791_CLK_SCIFA3 6
+#define R8A7791_CLK_SCIFA4 7
+#define R8A7791_CLK_SCIFA5 8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */