[SCSI] mpt3sas: fix cleanup on controller resource mapping failure
If mpt3sas_base_map_resources takes an early error path then its
counterpart, mpt3sas_base_free_resources needs to be careful about
cleaning up:
1 - _base_mask_interrupts and _base_make_ioc_ready require memory
mapped I/O registers, make sure that this is true.
2 - _base_free_irq iterates over the adapter's reply_queue_list, so
move this list head initialization out of _base_enable_msix to
_scsih_probe so this will always be safe.
3 - check that the controller PCI device and its BARs have been
enabled before disabling them.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 5dc280c..34ff896 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1709,8 +1709,6 @@
int i;
u8 try_msix = 0;
- INIT_LIST_HEAD(&ioc->reply_queue_list);
-
if (msix_disable == -1 || msix_disable == 0)
try_msix = 1;
@@ -1790,6 +1788,7 @@
if (pci_enable_device_mem(pdev)) {
pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n",
ioc->name);
+ ioc->bars = 0;
return -ENODEV;
}
@@ -1798,6 +1797,7 @@
MPT3SAS_DRIVER_NAME)) {
pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
ioc->name);
+ ioc->bars = 0;
r = -ENODEV;
goto out_fail;
}
@@ -4393,18 +4393,25 @@
dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
- _base_mask_interrupts(ioc);
- ioc->shost_recovery = 1;
- _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
- ioc->shost_recovery = 0;
+ if (ioc->chip_phys && ioc->chip) {
+ _base_mask_interrupts(ioc);
+ ioc->shost_recovery = 1;
+ _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+ ioc->shost_recovery = 0;
+ }
+
_base_free_irq(ioc);
_base_disable_msix(ioc);
- if (ioc->chip_phys)
+
+ if (ioc->chip_phys && ioc->chip)
iounmap(ioc->chip);
ioc->chip_phys = 0;
- pci_release_selected_regions(ioc->pdev, ioc->bars);
- pci_disable_pcie_error_reporting(pdev);
- pci_disable_device(pdev);
+
+ if (pci_is_enabled(pdev)) {
+ pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ }
return;
}